patch-2.4.1 linux/drivers/usb/storage/unusual_devs.h

Next file: linux/drivers/usb/storage/usb.c
Previous file: linux/drivers/usb/storage/scsiglue.c
Back to the patch index
Back to the overall index
Lines: 233
Date: Mon Jan 29 23:26:34 2001
Orig file: v2.4.0/linux/drivers/usb/storage/unusual_devs.h
Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.0/linux/drivers/usb/storage/unusual_devs.h linux/drivers/usb/storage/unusual_devs.h
@@ -0,0 +1,232 @@
+/* Driver for USB Mass Storage compliant devices
+ * Ununsual Devices File
+ *
+ * $Id: unusual_devs.h,v 1.1 2000/12/05 05:38:31 mdharm Exp $
+ *
+ * Current development and maintenance by:
+ *   (c) 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* IMPORTANT NOTE: This file must be included in another file which does
+ * the following thing for it to work:
+ * The macro UNUSUAL_DEV() must be defined before this file is included
+ */
+#include <linux/config.h>
+
+/* If you edit this file, please try to keep it sorted first by VendorID,
+ * then by ProductID.
+ */
+
+UNUSUAL_DEV(  0x03ee, 0x0000, 0x0000, 0x0245, 
+		"Mitsumi",
+		"CD-R/RW Drive",
+		US_SC_8020, US_PR_CBI, NULL, 0), 
+
+UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200, 
+		"HP",
+		"CD-Writer+",
+		US_SC_8070, US_PR_CB, NULL, 0), 
+
+#ifdef CONFIG_USB_STORAGE_HP8200e
+UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001, 
+		"HP",
+		"CD-Writer+ 8200e",
+		US_SC_8070, US_PR_SCM_ATAPI, init_8200e, 0), 
+#endif
+
+UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200, 
+		"Matshita",
+		"LS-120",
+		US_SC_8020, US_PR_CB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100, 
+		"Shuttle",
+		"eUSCSI Bridge",
+		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 
+		US_FL_SCM_MULT_TARG ), 
+
+#ifdef CONFIG_USB_STORAGE_SDDR09
+UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999, 
+		"Sandisk",
+		"ImageMate SDDR09",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
+		US_FL_SINGLE_LUN | US_FL_START_STOP ),
+#endif
+
+#ifdef CONFIG_USB_STORAGE_DPCM
+UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+ 		US_SC_SCSI, US_PR_DPCM_USB, NULL,
+		US_FL_START_STOP ),
+#endif
+
+UNUSUAL_DEV(  0x04e6, 0x0006, 0x0100, 0x0200, 
+		"Shuttle",
+		"eUSB MMC Adapter",
+		US_SC_SCSI, US_PR_CB, NULL, 
+		US_FL_SINGLE_LUN), 
+
+UNUSUAL_DEV(  0x04e6, 0x0007, 0x0100, 0x0200, 
+		"Sony",
+		"Hifd",
+		US_SC_SCSI, US_PR_CB, NULL, 
+		US_FL_SINGLE_LUN), 
+
+UNUSUAL_DEV(  0x04e6, 0x0009, 0x0200, 0x0200, 
+		"Shuttle",
+		"eUSB ATA/ATAPI Adapter",
+		US_SC_8020, US_PR_CB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200, 
+		"Shuttle",
+		"eUSB CompactFlash Adapter",
+		US_SC_8020, US_PR_CB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100, 
+		"Shuttle",
+		"eUSCSI Bridge",
+		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 
+		US_FL_SCM_MULT_TARG ), 
+
+UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100, 
+		"Shuttle",
+		"eUSCSI Bridge",
+		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, 
+		US_FL_SCM_MULT_TARG ), 
+
+UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200, 
+		"Shuttle",
+		"CD-RW Device",
+		US_SC_8020, US_PR_CB, NULL, 0),
+
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0210, 
+		"Sony",
+		"DSC-S30/S70/505V/F505", 
+		US_SC_SCSI, US_PR_CB, NULL,
+		US_FL_SINGLE_LUN | US_FL_START_STOP | US_FL_MODE_XLATE ),
+
+UNUSUAL_DEV(  0x054c, 0x002d, 0x0100, 0x0100, 
+		"Sony",
+		"Memorystick MSAC-US1",
+		US_SC_UFI, US_PR_CB, NULL,
+		US_FL_SINGLE_LUN | US_FL_START_STOP ),
+
+UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299, 
+		"Y-E Data",
+		"Flashbuster-U",
+		US_SC_UFI,  US_PR_CB, NULL,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x057b, 0x0000, 0x0300, 0x9999, 
+		"Y-E Data",
+		"Flashbuster-U",
+		US_SC_UFI,  US_PR_CBI, NULL,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x059f, 0xa601, 0x0200, 0x0200, 
+		"LaCie",
+		"USB Hard Disk",
+		US_SC_RBC, US_PR_CB, NULL, 0 ), 
+
+UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0100, 
+		"In-System",
+		"USB/IDE Bridge (ATAPI ONLY!)",
+		US_SC_8070, US_PR_BULK, NULL, 0 ), 
+
+UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100, 
+		"TEAC",
+		"Floppy Drive",
+		US_SC_UFI, US_PR_CB, NULL, 0 ), 
+
+#ifdef CONFIG_USB_STORAGE_SDDR09
+UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100, 
+		"Olympus",
+		"Camedia MAUSB-2",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
+		US_FL_SINGLE_LUN | US_FL_START_STOP ),
+#endif
+
+UNUSUAL_DEV(  0x0693, 0x0002, 0x0100, 0x0100, 
+		"Hagiwara",
+		"FlashGate SmartMedia",
+		US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+
+UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
+		"Hagiwara",
+		"Flashgate",
+		US_SC_SCSI, US_PR_BULK, NULL, 0 ), 
+
+UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200, 
+		"Sandisk",
+		"ImageMate SDDR-05a",
+		US_SC_SCSI, US_PR_CB, NULL,
+		US_FL_SINGLE_LUN | US_FL_START_STOP),
+
+UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
+                "Sandisk",
+                "ImageMate SDDR-12",
+                US_SC_SCSI, US_PR_CB, NULL,
+                US_FL_SINGLE_LUN ),
+
+#ifdef CONFIG_USB_STORAGE_SDDR09
+UNUSUAL_DEV(  0x0781, 0x0200, 0x0100, 0x0100, 
+		"Sandisk",
+		"ImageMate SDDR-09",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
+		US_FL_SINGLE_LUN | US_FL_START_STOP ),
+#endif
+
+UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009, 
+		"Sandisk",
+		"ImageMate SDDR-31",
+		US_SC_SCSI, US_PR_BULK, NULL,
+		US_FL_IGNORE_SER),
+
+UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0100, 
+		"Microtech",
+		"USB-SCSI-DB25",
+		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ), 
+
+#ifdef CONFIG_USB_STORAGE_FREECOM
+UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
+                "Freecom",
+                "USB-IDE",
+                US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
+#endif
+
+UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100, 
+		"Microtech",
+		"USB-SCSI-HD50",
+		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ), 
+
+#ifdef CONFIG_USB_STORAGE_DPCM
+UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+ 		US_SC_SCSI, US_PR_DPCM_USB, NULL,
+		US_FL_START_STOP ),
+#endif
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)