patch-2.4.1 linux/drivers/md/md.c
Next file: linux/drivers/md/raid5.c
Previous file: linux/drivers/md/lvm.c
Back to the patch index
Back to the overall index
- Lines: 202
- Date:
Mon Jan 29 13:16:00 2001
- Orig file:
v2.4.0/linux/drivers/md/md.c
- Orig date:
Mon Dec 11 13:19:35 2000
diff -u --recursive --new-file v2.4.0/linux/drivers/md/md.c linux/drivers/md/md.c
@@ -2033,68 +2033,65 @@
struct {
int set;
int noautodetect;
+} raid_setup_args md__initdata;
-} raid_setup_args md__initdata = { 0, 0 };
-
-void md_setup_drive(void) md__init;
+void md_setup_drive (void) md__init;
/*
* Searches all registered partitions for autorun RAID arrays
* at boot time.
*/
-#ifdef CONFIG_AUTODETECT_RAID
-static int detected_devices[128] md__initdata = { 0, };
-static int dev_cnt=0;
+static int detected_devices[128] md__initdata;
+static int dev_cnt;
+
void md_autodetect_dev(kdev_t dev)
{
if (dev_cnt >= 0 && dev_cnt < 127)
detected_devices[dev_cnt++] = dev;
}
-#endif
-int md__init md_run_setup(void)
+
+static void autostart_arrays (void)
{
-#ifdef CONFIG_AUTODETECT_RAID
mdk_rdev_t *rdev;
int i;
- if (raid_setup_args.noautodetect)
- printk(KERN_INFO "skipping autodetection of RAID arrays\n");
- else {
-
- printk(KERN_INFO "autodetecting RAID arrays\n");
+ printk(KERN_INFO "autodetecting RAID arrays\n");
- for (i=0; i<dev_cnt; i++) {
- kdev_t dev = detected_devices[i];
+ for (i=0; i<dev_cnt; i++) {
+ kdev_t dev = detected_devices[i];
- if (md_import_device(dev,1)) {
- printk(KERN_ALERT "could not import %s!\n",
- partition_name(dev));
- continue;
- }
- /*
- * Sanity checks:
- */
- rdev = find_rdev_all(dev);
- if (!rdev) {
- MD_BUG();
- continue;
- }
- if (rdev->faulty) {
- MD_BUG();
- continue;
- }
- md_list_add(&rdev->pending, &pending_raid_disks);
+ if (md_import_device(dev,1)) {
+ printk(KERN_ALERT "could not import %s!\n",
+ partition_name(dev));
+ continue;
}
-
- autorun_devices(-1);
+ /*
+ * Sanity checks:
+ */
+ rdev = find_rdev_all(dev);
+ if (!rdev) {
+ MD_BUG();
+ continue;
+ }
+ if (rdev->faulty) {
+ MD_BUG();
+ continue;
+ }
+ md_list_add(&rdev->pending, &pending_raid_disks);
}
+ autorun_devices(-1);
+}
+
+int md__init md_run_setup(void)
+{
+ if (raid_setup_args.noautodetect)
+ printk(KERN_INFO "skipping autodetection of RAID arrays\n");
+ else
+ autostart_arrays();
dev_cnt = -1; /* make sure further calls to md_autodetect_dev are ignored */
-#endif
-#ifdef CONFIG_MD_BOOT
md_setup_drive();
-#endif
return 0;
}
@@ -2558,6 +2555,11 @@
md_print_devices();
goto done_unlock;
+ case RAID_AUTORUN:
+ err = 0;
+ autostart_arrays();
+ goto done;
+
case BLKGETSIZE: /* Return device size */
if (!arg) {
err = -EINVAL;
@@ -3639,14 +3641,12 @@
return (0);
}
-#ifdef CONFIG_MD_BOOT
-#define MAX_MD_BOOT_DEVS 8
-struct {
- unsigned long set;
- int pers[MAX_MD_BOOT_DEVS];
- int chunk[MAX_MD_BOOT_DEVS];
- kdev_t devices[MAX_MD_BOOT_DEVS][MD_SB_DISKS];
-} md_setup_args md__initdata = { 0, };
+static struct {
+ char device_set [MAX_MD_DEVS];
+ int pers[MAX_MD_DEVS];
+ int chunk[MAX_MD_DEVS];
+ kdev_t devices[MAX_MD_DEVS][MD_SB_DISKS];
+} md_setup_args md__initdata;
/*
* Parse the command-line parameters given our kernel, but do not
@@ -3676,10 +3676,10 @@
printk("md: Too few arguments supplied to md=.\n");
return 0;
}
- if (minor >= MAX_MD_BOOT_DEVS) {
+ if (minor >= MAX_MD_DEVS) {
printk ("md: Minor device number too high.\n");
return 0;
- } else if (md_setup_args.set & (1 << minor)) {
+ } else if (md_setup_args.device_set[minor]) {
printk ("md: Warning - md=%d,... has been specified twice;\n"
" will discard the first definition.\n", minor);
}
@@ -3737,7 +3737,7 @@
printk ("md: Will configure md%d (%s) from %s, below.\n",
minor, pername, devnames);
md_setup_args.devices[minor][i] = (kdev_t) 0;
- md_setup_args.set |= (1 << minor);
+ md_setup_args.device_set[minor] = 1;
return 1;
}
@@ -3747,10 +3747,11 @@
kdev_t dev;
mddev_t*mddev;
- for (minor = 0; minor < MAX_MD_BOOT_DEVS; minor++) {
+ for (minor = 0; minor < MAX_MD_DEVS; minor++) {
mdu_disk_info_t dinfo;
- int err=0;
- if (!(md_setup_args.set & (1 << minor)))
+
+ int err = 0;
+ if (!md_setup_args.device_set[minor])
continue;
printk("md: Loading md%d.\n", minor);
if (mddev_map[minor].mddev) {
@@ -3776,7 +3777,7 @@
ainfo.layout = 0;
ainfo.chunk_size = md_setup_args.chunk[minor];
err = set_array_info(mddev, &ainfo);
- for (i=0; !err && (dev = md_setup_args.devices[minor][i]); i++) {
+ for (i = 0; !err && (dev = md_setup_args.devices[minor][i]); i++) {
dinfo.number = i;
dinfo.raid_disk = i;
dinfo.state = (1<<MD_DISK_ACTIVE)|(1<<MD_DISK_SYNC);
@@ -3807,7 +3808,6 @@
}
__setup("md=", md_setup);
-#endif
#ifdef MODULE
int init_module (void)
@@ -3859,9 +3859,7 @@
#endif
__initcall(md_init);
-#if defined(CONFIG_AUTODETECT_RAID) || defined(CONFIG_MD_BOOT)
__initcall(md_run_setup);
-#endif
MD_EXPORT_SYMBOL(md_size);
MD_EXPORT_SYMBOL(register_md_personality);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)