patch-2.1.87 linux/fs/umsdos/inode.c
Next file: linux/fs/umsdos/ioctl.c
Previous file: linux/fs/umsdos/file.c
Back to the patch index
Back to the overall index
- Lines: 893
- Date:
Thu Feb 12 13:36:57 1998
- Orig file:
v2.1.86/linux/fs/umsdos/inode.c
- Orig date:
Mon Jun 16 16:35:59 1997
diff -u --recursive --new-file v2.1.86/linux/fs/umsdos/inode.c linux/fs/umsdos/inode.c
@@ -19,96 +19,116 @@
#include <linux/stat.h>
#include <linux/umsdos_fs.h>
-struct inode *pseudo_root=NULL; /* Useful to simulate the pseudo DOS */
- /* directory. See UMSDOS_readdir_x() */
+struct inode *pseudo_root=NULL; /* Useful to simulate the pseudo DOS */
+ /* directory. See UMSDOS_readdir_x() */
/* #Specification: convention / PRINTK Printk and printk
- Here is the convention for the use of printk inside fs/umsdos
-
- printk carry important message (error or status).
- Printk is for debugging (it is a macro defined at the beginning of
- most source.
- PRINTK is a nulled Printk macro.
-
- This convention makes the source easier to read, and Printk easier
- to shut off.
+ Here is the convention for the use of printk inside fs/umsdos
+
+ printk carry important message (error or status).
+ Printk is for debugging (it is a macro defined at the beginning of
+ most source.
+ PRINTK is a nulled Printk macro.
+
+ This convention makes the source easier to read, and Printk easier
+ to shut off.
*/
#define PRINTK(x)
#define Printk(x) printk x
-
void UMSDOS_put_inode(struct inode *inode)
{
- PRINTK (("put inode %x owner %x pos %d dir %x\n",inode
- ,inode->u.umsdos_i.i_emd_owner,inode->u.umsdos_i.pos
- ,inode->u.umsdos_i.i_emd_dir));
- if (inode != NULL && inode == pseudo_root){
- printk ("Umsdos: Oops releasing pseudo_root. Notify jacques@solucorp.qc.ca\n");
- }
- fat_put_inode(inode);
+ Printk ((KERN_DEBUG "put inode %x (%d) owner %x pos %d dir %x\n",inode, inode->i_ino
+ ,inode->u.umsdos_i.i_emd_owner,inode->u.umsdos_i.pos
+ ,inode->u.umsdos_i.i_emd_dir));
+ if (inode && pseudo_root && inode == pseudo_root){
+ printk (KERN_ERR "Umsdos: Oops releasing pseudo_root. Notify jacques@solucorp.qc.ca\n");
+ }
+
+#if 1
+ fat_put_inode(inode);
+#else
+ Printk ((KERN_WARNING "UMSDOS_put_inode: skipping ! FIXME /mn/\n"));
+#endif
}
void UMSDOS_put_super(struct super_block *sb)
{
- msdos_put_super(sb);
- MOD_DEC_USE_COUNT;
+ Printk (("UMSDOS_put_super: /mn/ entering\n"));
+ msdos_put_super(sb);
+ MOD_DEC_USE_COUNT;
}
-void UMSDOS_statfs(struct super_block *sb,struct statfs *buf, int bufsiz)
-{
- fat_statfs(sb,buf,bufsiz);
-}
-
/*
- Call msdos_lookup, but set back the original msdos function table.
- Return 0 if ok, or a negative error code if not.
+ Call msdos_lookup, but set back the original msdos function table.
+ Return 0 if ok, or a negative error code if not.
*/
int umsdos_real_lookup (
- struct inode *dir,
- const char *name,
- int len,
- struct inode **result) /* Will hold inode of the file, if successful */
-{
- int ret;
- atomic_inc(&dir->i_count);
- ret = msdos_lookup (dir,name,len,result);
- return ret;
+ struct inode *dir,
+ struct dentry *dentry
+ ) /* Will hold inode of the file, if successful */
+{
+ int ret;
+
+ Printk (("umsdos_real_lookup /mn/: looking for %s /",dentry->d_name.name));
+ dir->i_count++; /* /mn/ what is this and why ? locking? */
+ ret = msdos_lookup (dir,dentry);
+ Printk (("/ returned %d\n", ret));
+
+ return ret;
}
+
/*
- Complete the setup of an directory inode.
- First, it completes the function pointers, then
- it locates the EMD file. If the EMD is there, then plug the
- umsdos function table. If not, use the msdos one.
+ Complete the setup of an directory inode.
+ First, it completes the function pointers, then
+ it locates the EMD file. If the EMD is there, then plug the
+ umsdos function table. If not, use the msdos one.
*/
void umsdos_setup_dir_inode (struct inode *inode)
{
- inode->u.umsdos_i.i_emd_dir = 0;
- {
- struct inode *emd_dir = umsdos_emd_dir_lookup (inode,0);
- extern struct inode_operations umsdos_rdir_inode_operations;
- inode->i_op = emd_dir != NULL
- ? &umsdos_dir_inode_operations
- : &umsdos_rdir_inode_operations;
- iput (emd_dir);
- }
+ inode->u.umsdos_i.i_emd_dir = 0;
+ {
+ struct inode *emd_dir = NULL;
+ extern struct inode_operations umsdos_rdir_inode_operations;
+
+ emd_dir = umsdos_emd_dir_lookup (inode,0);
+ Printk (("umsdos_setup_dir_inode: umsdos_emd_dir_lookup for inode=%p returned %p\n",inode,emd_dir));
+
+ if (emd_dir == NULL) {
+ Printk (("umsdos_setup_dir_inode /mn/: Setting up dir_inode_ops --> eg. NOT using EMD.\n"));
+ inode->i_op = &umsdos_rdir_inode_operations;
+ } else {
+ Printk (("umsdos_setup_dir_inode /mn/: Setting up rdir_inode_ops --> eg. using EMD.\n"));
+ inode->i_op = &umsdos_dir_inode_operations;
+ }
+
+ iput (emd_dir);
+ }
}
+
+
/*
Add some info into an inode so it can find its owner quickly
*/
void umsdos_set_dirinfo(
- struct inode *inode,
- struct inode *dir,
- off_t f_pos)
-{
- struct inode *emd_owner = umsdos_emd_dir_lookup(dir,1);
- inode->u.umsdos_i.i_dir_owner = dir->i_ino;
- inode->u.umsdos_i.i_emd_owner = emd_owner->i_ino;
- iput (emd_owner);
- inode->u.umsdos_i.pos = f_pos;
+ struct inode *inode,
+ struct inode *dir,
+ off_t f_pos)
+{
+ struct inode *emd_owner;
+ /* FIXME, I don't have a clue on this one */
+ Printk (("umsdos_set_dirinfo: /mn/ FIXME: no clue\n"));
+ emd_owner = umsdos_emd_dir_lookup(dir,1);
+ inode->u.umsdos_i.i_dir_owner = dir->i_ino;
+ inode->u.umsdos_i.i_emd_owner = emd_owner->i_ino;
+ iput (emd_owner);
+ inode->u.umsdos_i.pos = f_pos;
}
+
+
/*
Tells if an Umsdos inode has been "patched" once.
Return != 0 if so.
@@ -123,80 +143,94 @@
return atomic_read(&inode->i_count) > 1;
#endif
}
+
+
/*
- Connect the proper tables in the inode and add some info.
+ Connect the proper tables in the inode and add some info.
*/
void umsdos_patch_inode (
- struct inode *inode,
- struct inode *dir, /* May be NULL */
- off_t f_pos)
-{
- /*
- This function is called very early to setup the inode, somewhat
- too early (called by UMSDOS_read_inode). At this point, we can't
- do to much, such as lookup up EMD files and so on. This causes
- confusion in the kernel. This is why some initialisation
- will be done when dir != NULL only.
-
- UMSDOS do run piggy back on top of msdos fs. It looks like something
- is missing in the VFS to accommodate stacked fs. Still unclear what
- (quite honestly).
-
- Well, maybe one! A new entry "may_unmount" which would allow
- the stacked fs to allocate some inode permanently and release
- them at the end. Doing that now introduce a problem. unmount
- always fail because some inodes are in use.
- */
- if (!umsdos_isinit(inode)){
- inode->u.umsdos_i.i_emd_dir = 0;
- if (S_ISREG(inode->i_mode)){
- if (inode->i_op->bmap != NULL){
- inode->i_op = &umsdos_file_inode_operations;
- }else{
- inode->i_op = &umsdos_file_inode_operations_no_bmap;
- }
- }else if (S_ISDIR(inode->i_mode)){
- if (dir != NULL){
- umsdos_setup_dir_inode(inode);
- }
- }else if (S_ISLNK(inode->i_mode)){
- inode->i_op = &umsdos_symlink_inode_operations;
- }else if (S_ISCHR(inode->i_mode)){
- inode->i_op = &chrdev_inode_operations;
- }else if (S_ISBLK(inode->i_mode)){
- inode->i_op = &blkdev_inode_operations;
- }else if (S_ISFIFO(inode->i_mode)){
- init_fifo(inode);
- }
- if (dir != NULL){
- /* #Specification: inode / umsdos info
- The first time an inode is seen (inode->i_count == 1),
- the inode number of the EMD file which control this inode
- is tagged to this inode. It allows operation such
- as notify_change to be handled.
- */
- /*
- This is done last because it also control the
- status of umsdos_isinit()
- */
- umsdos_set_dirinfo (inode,dir,f_pos);
- }
- }else if (dir != NULL){
- /*
- Test to see if the info is maintained.
- This should be removed when the file system will be proven.
- */
- struct inode *emd_owner = umsdos_emd_dir_lookup(dir,1);
- iput (emd_owner);
- if (emd_owner->i_ino != inode->u.umsdos_i.i_emd_owner){
- printk ("UMSDOS: *** EMD_OWNER ??? *** ino = %ld %ld <> %ld "
- ,inode->i_ino,emd_owner->i_ino,inode->u.umsdos_i.i_emd_owner);
- }
- }
+ struct inode *inode,
+ struct inode *dir, /* May be NULL */
+ off_t f_pos)
+{
+ /*
+ This function is called very early to setup the inode, somewhat
+ too early (called by UMSDOS_read_inode). At this point, we can't
+ do to much, such as lookup up EMD files and so on. This causes
+ confusion in the kernel. This is why some initialisation
+ will be done when dir != NULL only.
+
+ UMSDOS do run piggy back on top of msdos fs. It looks like something
+ is missing in the VFS to accommodate stacked fs. Still unclear what
+ (quite honestly).
+
+ Well, maybe one! A new entry "may_unmount" which would allow
+ the stacked fs to allocate some inode permanently and release
+ them at the end. Doing that now introduce a problem. unmount
+ always fail because some inodes are in use.
+ */
+ if (!umsdos_isinit(inode)){
+ inode->u.umsdos_i.i_emd_dir = 0;
+ if (S_ISREG(inode->i_mode)){
+ if (inode->i_op->bmap != NULL){
+ Printk (("umsdos_patch_inode /mn/: seting i_op = umsdos_file_inode_operations\n"));
+ inode->i_op = &umsdos_file_inode_operations;
+ }else{
+ Printk (("umsdos_patch_inode /mn/: seting i_op = umsdos_file_inode_operations_no_bmap\n"));
+ inode->i_op = &umsdos_file_inode_operations_no_bmap;
+ }
+ }else if (S_ISDIR(inode->i_mode)){
+ if (dir != NULL){
+ umsdos_setup_dir_inode(inode);
+ }
+ }else if (S_ISLNK(inode->i_mode)){
+ Printk (("umsdos_patch_inode /mn/: seting i_op = umsdos_symlink_inode_operations\n"));
+ inode->i_op = &umsdos_symlink_inode_operations;
+ }else if (S_ISCHR(inode->i_mode)){
+ Printk (("umsdos_patch_inode /mn/: seting i_op = chrdev_inode_operations\n"));
+ inode->i_op = &chrdev_inode_operations;
+ }else if (S_ISBLK(inode->i_mode)){
+ Printk (("umsdos_patch_inode /mn/: seting i_op = blkdev_inode_operations\n"));
+ inode->i_op = &blkdev_inode_operations;
+ }else if (S_ISFIFO(inode->i_mode)){
+ Printk (("umsdos_patch_inode /mn/: uhm, init_fifo\n"));
+ init_fifo(inode);
+ }
+ if (dir != NULL){
+ /* #Specification: inode / umsdos info
+ The first time an inode is seen (inode->i_count == 1),
+ the inode number of the EMD file which control this inode
+ is tagged to this inode. It allows operation such
+ as notify_change to be handled.
+ */
+ /*
+ This is done last because it also control the
+ status of umsdos_isinit()
+ */
+ Printk (("umsdos_patch_inode /mn/: here we go: calling umsdos_set_dirinfo (%p,%p,%d)\n", inode, dir, f_pos));
+ umsdos_set_dirinfo (inode,dir,f_pos);
+ }
+ }else if (dir != NULL){
+ /*
+ Test to see if the info is maintained.
+ This should be removed when the file system will be proven.
+ */
+ /* FIXME, again, not a clue */
+ struct inode *emd_owner;
+ Printk (("umsdos_patch_inode: /mn/ Warning: untested emd_owner thingy...\n"));
+ emd_owner = umsdos_emd_dir_lookup(dir,1);
+ iput (emd_owner);
+ if (emd_owner->i_ino != inode->u.umsdos_i.i_emd_owner){
+ printk ("UMSDOS: *** EMD_OWNER ??? *** ino = %ld %ld <> %ld "
+ ,inode->i_ino,emd_owner->i_ino,inode->u.umsdos_i.i_emd_owner);
+ }
+ }
}
+
+
/*
- Get the inode of the directory which owns this inode.
- Return 0 if ok, -EIO if error.
+ Get the inode of the directory which owns this inode.
+ Return 0 if ok, -EIO if error.
*/
int umsdos_get_dirowner(
struct inode *inode,
@@ -217,14 +251,17 @@
}
return ret;
}
+
+
+
/*
Load an inode from disk.
*/
void UMSDOS_read_inode(struct inode *inode)
{
- PRINTK (("read inode %x ino = %d ",inode,inode->i_ino));
+ Printk (("UMSDOS_read_inode %x ino = %d ",inode,inode->i_ino));
msdos_read_inode(inode);
- PRINTK (("ino = %d %d\n",inode->i_ino,atomic_read(&inode->i_count)));
+ PRINTK (("ino after msdos_read_inode= %d\n",inode->i_ino));
if (S_ISDIR(inode->i_mode)
&& (inode->u.umsdos_i.u.dir_info.creating != 0
|| inode->u.umsdos_i.u.dir_info.looking != 0
@@ -250,6 +287,7 @@
umsdos_patch_inode(inode,NULL,0);
}
+
/*
Update the disk with the inode content
*/
@@ -257,7 +295,7 @@
{
struct iattr newattrs;
- PRINTK (("UMSDOS_write_inode emd %d\n",inode->u.umsdos_i.i_emd_owner));
+ PRINTK (("UMSDOS_write_inode emd %d (FIXME: missing notify_change)\n",inode->u.umsdos_i.i_emd_owner));
fat_write_inode(inode);
newattrs.ia_mtime = inode->i_mtime;
newattrs.ia_atime = inode->i_atime;
@@ -268,244 +306,288 @@
to update the EMD entry associated with this inode.
But it has the side effect to re"dirt" the inode.
*/
+ /* FIXME, notify_change now takes a dentry, not an
+ inode so, the emd update needs to be done here
UMSDOS_notify_change (inode, &newattrs);
- inode->i_dirt = 0;
+ */
+
+ /* FIXME inode->i_dirt = 0; */
}
-int UMSDOS_notify_change(struct inode *inode, struct iattr *attr)
+int UMSDOS_notify_change(struct dentry *dentry, struct iattr *attr)
{
- int ret = 0;
-
- if ((ret = inode_change_ok(inode, attr)) != 0)
- return ret;
-
- if (inode->i_nlink > 0){
- /* #Specification: notify_change / i_nlink > 0
- notify change is only done for inode with nlink > 0. An inode
- with nlink == 0 is no longer associated with any entry in
- the EMD file, so there is nothing to update.
- */
- unsigned long i_emd_owner = inode->u.umsdos_i.i_emd_owner;
- if (inode == inode->i_sb->s_mounted){
- /* #Specification: root inode / attributes
- I don't know yet how this should work. Normally
- the attributes (permissions bits, owner, times) of
- a directory are stored in the EMD file of its parent.
-
- One thing we could do is store the attributes of the root
- inode in its own EMD file. A simple entry named "." could
- be used for this special case. It would be read once
- when the file system is mounted and update in
- UMSDOS_notify_change() (right here).
-
- I am not sure of the behavior of the root inode for
- a real UNIX file system. For now, this is a nop.
- */
- }else if (i_emd_owner != 0xffffffff && i_emd_owner != 0){
- /* This inode is not a EMD file nor an inode used internally
- by MSDOS, so we can update its status.
- See emd.c
- */
- struct inode *emd_owner = iget (inode->i_sb,i_emd_owner);
- PRINTK (("notify change %p ",inode));
- if (emd_owner == NULL){
- printk ("UMSDOS: emd_owner = NULL ???");
- ret = -EPERM;
- }else{
- struct file filp;
- struct umsdos_dirent entry;
- filp.f_pos = inode->u.umsdos_i.pos;
- filp.f_reada = 0;
- PRINTK (("pos = %d ",filp.f_pos));
- /* Read only the start of the entry since we don't touch */
- /* the name */
- ret = umsdos_emd_dir_read (emd_owner,&filp,(char*)&entry
- ,UMSDOS_REC_SIZE);
- if (ret == 0){
- if (attr->ia_valid & ATTR_UID)
- entry.uid = attr->ia_uid;
- if (attr->ia_valid & ATTR_GID)
- entry.gid = attr->ia_gid;
- if (attr->ia_valid & ATTR_MODE)
- entry.mode = attr->ia_mode;
- if (attr->ia_valid & ATTR_ATIME)
- entry.atime = attr->ia_atime;
- if (attr->ia_valid & ATTR_MTIME)
- entry.mtime = attr->ia_mtime;
- if (attr->ia_valid & ATTR_CTIME)
- entry.ctime = attr->ia_ctime;
-
- entry.nlink = inode->i_nlink;
- filp.f_pos = inode->u.umsdos_i.pos;
- ret = umsdos_emd_dir_write (emd_owner,&filp,(char*)&entry
- ,UMSDOS_REC_SIZE);
-
- PRINTK (("notify pos %d ret %d nlink %d "
- ,inode->u.umsdos_i.pos
- ,ret,entry.nlink));
- /* #Specification: notify_change / msdos fs
- notify_change operation are done only on the
- EMD file. The msdos fs is not even called.
- */
- }
- iput (emd_owner);
- }
- PRINTK (("\n"));
- }
+ int ret = 0;
+ struct inode *inode = dentry->d_inode;
+
+ Printk (("UMSDOS_notify_change: /mn/ completly untested\n"));
+
+ if ((ret = inode_change_ok(inode, attr)) != 0)
+ return ret;
+
+ if (inode->i_nlink > 0){
+ /* #Specification: notify_change / i_nlink > 0
+ notify change is only done for inode with nlink > 0. An inode
+ with nlink == 0 is no longer associated with any entry in
+ the EMD file, so there is nothing to update.
+ */
+ unsigned long i_emd_owner = inode->u.umsdos_i.i_emd_owner;
+ if (inode == iget(inode->i_sb,UMSDOS_ROOT_INO)){
+ /* #Specification: root inode / attributes
+ I don't know yet how this should work. Normally
+ the attributes (permissions bits, owner, times) of
+ a directory are stored in the EMD file of its parent.
+
+ One thing we could do is store the attributes of the root
+ inode in its own EMD file. A simple entry named "." could
+ be used for this special case. It would be read once
+ when the file system is mounted and update in
+ UMSDOS_notify_change() (right here).
+
+ I am not sure of the behavior of the root inode for
+ a real UNIX file system. For now, this is a nop.
+ */
+ }else if (i_emd_owner != 0xffffffff && i_emd_owner != 0){
+ /* This inode is not a EMD file nor an inode used internally
+ by MSDOS, so we can update its status.
+ See emd.c
+ */
+ struct inode *emd_owner = iget (inode->i_sb,i_emd_owner);
+ Printk (("notify change %p ",inode));
+ if (emd_owner == NULL){
+ printk ("UMSDOS: emd_owner = NULL ???");
+ ret = -EPERM;
+ }else{
+ struct file filp;
+ struct umsdos_dirent entry;
+ loff_t offs;
+ offs = 0;
+ filp.f_pos = inode->u.umsdos_i.pos;
+ filp.f_reada = 0;
+ Printk (("pos = %d ",filp.f_pos));
+ /* Read only the start of the entry since we don't touch */
+ /* the name */
+ ret = umsdos_emd_dir_read (emd_owner, &filp, (char*)&entry, UMSDOS_REC_SIZE, &offs);
+ if (ret == 0){
+ if (attr->ia_valid & ATTR_UID)
+ entry.uid = attr->ia_uid;
+ if (attr->ia_valid & ATTR_GID)
+ entry.gid = attr->ia_gid;
+ if (attr->ia_valid & ATTR_MODE)
+ entry.mode = attr->ia_mode;
+ if (attr->ia_valid & ATTR_ATIME)
+ entry.atime = attr->ia_atime;
+ if (attr->ia_valid & ATTR_MTIME)
+ entry.mtime = attr->ia_mtime;
+ if (attr->ia_valid & ATTR_CTIME)
+ entry.ctime = attr->ia_ctime;
+
+ entry.nlink = inode->i_nlink;
+ filp.f_pos = inode->u.umsdos_i.pos;
+ offs = 0; /* FIXME */
+ ret = umsdos_emd_dir_write (emd_owner, &filp, (char*)&entry, UMSDOS_REC_SIZE, &offs);
+
+ Printk (("notify pos %d ret %d nlink %d "
+ ,inode->u.umsdos_i.pos
+ ,ret,entry.nlink));
+ /* #Specification: notify_change / msdos fs
+ notify_change operation are done only on the
+ EMD file. The msdos fs is not even called.
+ */
}
- if (ret == 0)
- inode_setattr(inode, attr);
- return ret;
+ iput (emd_owner);
+ }
+ Printk (("\n"));
+ }
+ }
+ if (ret == 0)
+ inode_setattr(inode, attr);
+ return ret;
}
/* #Specification: function name / convention
- A simple convention for function name has been used in
- the UMSDOS file system. First all function use the prefix
- umsdos_ to avoid name clash with other part of the kernel.
-
- And standard VFS entry point use the prefix UMSDOS (upper case)
- so it's easier to tell them apart.
+ A simple convention for function name has been used in
+ the UMSDOS file system. First all function use the prefix
+ umsdos_ to avoid name clash with other part of the kernel.
+
+ And standard VFS entry point use the prefix UMSDOS (upper case)
+ so it's easier to tell them apart.
+ N.B. (FIXME) PTW, the order and contents of this struct changed
*/
static struct super_operations umsdos_sops = {
- UMSDOS_read_inode,
- UMSDOS_notify_change,
- UMSDOS_write_inode,
- UMSDOS_put_inode,
- UMSDOS_put_super,
- NULL, /* added in 0.96c */
- UMSDOS_statfs,
- NULL
+ UMSDOS_read_inode, /* read_inode */
+ UMSDOS_write_inode, /* write_inode */
+ UMSDOS_put_inode, /* put_inode */
+ NULL, /* delete_inode */
+ UMSDOS_notify_change, /* notify_change */
+ UMSDOS_put_super, /* put_super */
+ NULL, /* write_super */
+ fat_statfs, /* statfs */
+ NULL /* remount_fs*/
};
/*
- Read the super block of an Extended MS-DOS FS.
+ Read the super block of an Extended MS-DOS FS.
*/
struct super_block *UMSDOS_read_super(
- struct super_block *s,
- void *data,
- int silent)
-{
- /* #Specification: mount / options
- Umsdos run on top of msdos. Currently, it supports no
- mount option, but happily pass all option received to
- the msdos driver. I am not sure if all msdos mount option
- make sense with Umsdos. Here are at least those who
- are useful.
- uid=
- gid=
-
- These options affect the operation of umsdos in directories
- which do not have an EMD file. They behave like normal
- msdos directory, with all limitation of msdos.
- */
- struct super_block *sb;
- MOD_INC_USE_COUNT;
- sb = msdos_read_super(s,data,silent);
- printk ("UMSDOS Beta 0.6 (compatibility level %d.%d, fast msdos)\n"
- ,UMSDOS_VERSION,UMSDOS_RELEASE);
- if (sb != NULL){
- MSDOS_SB(sb)->options.dotsOK = 0; /* disable hidden==dotfile */
- sb->s_op = &umsdos_sops;
- PRINTK (("umsdos_read_super %p\n",sb->s_mounted));
- umsdos_setup_dir_inode (sb->s_mounted);
- PRINTK (("End umsdos_read_super\n"));
- if (s == super_blocks){
- /* #Specification: pseudo root / mount
- When a umsdos fs is mounted, a special handling is done
- if it is the root partition. We check for the presence
- of the file /linux/etc/init or /linux/etc/rc or
- /linux/sbin/init. If one is there, we do a chroot("/linux").
-
- We check both because (see init/main.c) the kernel
- try to exec init at different place and if it fails
- it tries /bin/sh /etc/rc. To be consistent with
- init/main.c, many more test would have to be done
- to locate init. Any complain ?
-
- The chroot is done manually in init/main.c but the
- info (the inode) is located at mount time and store
- in a global variable (pseudo_root) which is used at
- different place in the umsdos driver. There is no
- need to store this variable elsewhere because it
- will always be one, not one per mount.
-
- This feature allows the installation
- of a linux system within a DOS system in a subdirectory.
-
- A user may install its linux stuff in c:\linux
- avoiding any clash with existing DOS file and subdirectory.
- When linux boots, it hides this fact, showing a normal
- root directory with /etc /bin /tmp ...
-
- The word "linux" is hardcoded in /usr/include/linux/umsdos_fs.h
- in the macro UMSDOS_PSDROOT_NAME.
- */
-
- struct inode *pseudo;
- Printk (("Mounting root\n"));
- if (umsdos_real_lookup (sb->s_mounted,UMSDOS_PSDROOT_NAME
- ,UMSDOS_PSDROOT_LEN,&pseudo)==0
- && S_ISDIR(pseudo->i_mode)){
- struct inode *etc = NULL;
- struct inode *sbin = NULL;
- int pseudo_ok = 0;
- Printk (("/%s is there\n",UMSDOS_PSDROOT_NAME));
- if (umsdos_real_lookup (pseudo,"etc",3,&etc)==0
- && S_ISDIR(etc->i_mode)){
- struct inode *init = NULL;
- struct inode *rc = NULL;
- Printk (("/%s/etc is there\n",UMSDOS_PSDROOT_NAME));
- if ((umsdos_real_lookup (etc,"init",4,&init)==0
- && S_ISREG(init->i_mode))
- || (umsdos_real_lookup (etc,"rc",2,&rc)==0
- && S_ISREG(rc->i_mode))){
- pseudo_ok = 1;
- }
- iput (init);
- iput (rc);
- }
- if (!pseudo_ok
- && umsdos_real_lookup (pseudo,"sbin",4,&sbin)==0
- && S_ISDIR(sbin->i_mode)){
- struct inode *init = NULL;
- Printk (("/%s/sbin is there\n",UMSDOS_PSDROOT_NAME));
- if (umsdos_real_lookup (sbin,"init",4,&init)==0
- && S_ISREG(init->i_mode)){
- pseudo_ok = 1;
- }
- iput (init);
- }
- if (pseudo_ok){
- umsdos_setup_dir_inode (pseudo);
- Printk (("Activating pseudo root /%s\n",UMSDOS_PSDROOT_NAME));
- pseudo_root = pseudo;
- atomic_inc(&pseudo->i_count);
- pseudo = NULL;
- }
- iput (sbin);
- iput (etc);
- }
- iput (pseudo);
- }
- } else {
- MOD_DEC_USE_COUNT;
+ struct super_block *sb,
+ void *data,
+ int silent)
+{
+ /* #Specification: mount / options
+ Umsdos run on top of msdos. Currently, it supports no
+ mount option, but happily pass all option received to
+ the msdos driver. I am not sure if all msdos mount option
+ make sense with Umsdos. Here are at least those who
+ are useful.
+ uid=
+ gid=
+
+ These options affect the operation of umsdos in directories
+ which do not have an EMD file. They behave like normal
+ msdos directory, with all limitation of msdos.
+ */
+ struct super_block *res;
+ struct inode *pseudo=NULL;
+ Printk (("UMSDOS /mn/: starting UMSDOS_read_super\n"));
+ MOD_INC_USE_COUNT;
+ Printk (("UMSDOS /mn/: sb = %p\n",sb));
+ res = msdos_read_super(sb,data,silent);
+ Printk (("UMSDOS /mn/: res = %p\n",res));
+ printk (KERN_INFO "UMSDOS dentry-WIP-Beta 0.82 (compatibility level %d.%d, fast msdos)\n", UMSDOS_VERSION, UMSDOS_RELEASE);
+
+ if (res == NULL) { MOD_DEC_USE_COUNT; return NULL; }
+
+ MSDOS_SB(res)->options.dotsOK = 0; /* disable hidden==dotfile */
+ res->s_op = &umsdos_sops;
+ Printk (("umsdos /mn/: here goes the iget ROOT_INO\n"));
+
+ pseudo = iget(res,UMSDOS_ROOT_INO);
+ Printk (("umsdos_read_super %p\n",pseudo));
+
+ umsdos_setup_dir_inode (pseudo);
+
+#if 0 /* disabled /mn/ test FIXME */
+
+ /* if (s == super_blocks){ FIXME, super_blocks no longer exported */
+ if(pseudo) {
+ /* #Specification: pseudo root / mount
+ When a umsdos fs is mounted, a special handling is done
+ if it is the root partition. We check for the presence
+ of the file /linux/etc/init or /linux/etc/rc or
+ /linux/sbin/init. If one is there, we do a chroot("/linux").
+
+ We check both because (see init/main.c) the kernel
+ try to exec init at different place and if it fails
+ it tries /bin/sh /etc/rc. To be consistent with
+ init/main.c, many more test would have to be done
+ to locate init. Any complain ?
+
+ The chroot is done manually in init/main.c but the
+ info (the inode) is located at mount time and store
+ in a global variable (pseudo_root) which is used at
+ different place in the umsdos driver. There is no
+ need to store this variable elsewhere because it
+ will always be one, not one per mount.
+
+ This feature allows the installation
+ of a linux system within a DOS system in a subdirectory.
+
+ A user may install its linux stuff in c:\linux
+ avoiding any clash with existing DOS file and subdirectory.
+ When linux boots, it hides this fact, showing a normal
+ root directory with /etc /bin /tmp ...
+
+ The word "linux" is hardcoded in /usr/include/linux/umsdos_fs.h
+ in the macro UMSDOS_PSDROOT_NAME.
+ */
+ struct dentry *root, *etc, *etc_rc, *init, *sbin; /* FIXME */
+
+ root = creat_dentry (UMSDOS_PSDROOT_NAME, strlen(UMSDOS_PSDROOT_NAME), NULL);
+ sbin = creat_dentry ("sbin", 4, NULL);
+
+ Printk (("Mounting root\n"));
+ if (umsdos_real_lookup (pseudo,root)==0
+ && (root->d_inode != NULL)
+ && S_ISDIR(root->d_inode->i_mode)){
+
+ int pseudo_ok = 0;
+ Printk (("/%s is there\n",UMSDOS_PSDROOT_NAME));
+ etc = creat_dentry ("etc", 3, NULL);
+
+
+ /* if (umsdos_real_lookup (pseudo,"etc",3,etc)==0 */
+ if(umsdos_real_lookup(pseudo, etc) == 0
+ && S_ISDIR(etc->d_inode->i_mode)){
+
+ Printk (("/%s/etc is there\n",UMSDOS_PSDROOT_NAME));
+
+ init = creat_dentry ("init", 4, NULL);
+ etc_rc = creat_dentry ("rc", 2, NULL);
+
+ /* if ((umsdos_real_lookup (etc,"init",4,init)==0*/
+ if((umsdos_real_lookup(pseudo, init) == 0
+ && S_ISREG(init->d_inode->i_mode))
+ /* || (umsdos_real_lookup (etc,"rc",2,&rc)==0*/
+ || (umsdos_real_lookup(pseudo, etc_rc) == 0
+ && S_ISREG(etc_rc->d_inode->i_mode))){
+ pseudo_ok = 1;
+ }
+ /* FIXME !!!!!! */
+ /* iput(init); */
+ /* iput(rc); */
}
- return sb;
+ if (!pseudo_ok
+ /* && umsdos_real_lookup (pseudo, "sbin", 4, sbin)==0*/
+ && umsdos_real_lookup(pseudo, sbin) == 0
+ && S_ISDIR(sbin->d_inode->i_mode)){
+
+ Printk (("/%s/sbin is there\n",UMSDOS_PSDROOT_NAME));
+ /* if (umsdos_real_lookup (sbin,"init",4,init)==0 */
+ if(umsdos_real_lookup(pseudo, init) == 0
+ && S_ISREG(init->d_inode->i_mode)){
+ pseudo_ok = 1;
+ }
+ /* FIXME !!!
+ iput (init); */
+ }
+ if (pseudo_ok){
+ umsdos_setup_dir_inode (pseudo);
+ Printk (("Activating pseudo root /%s\n",UMSDOS_PSDROOT_NAME));
+ pseudo_root = pseudo;
+ pseudo->i_count++;
+ pseudo = NULL;
+ }
+ /* FIXME
+
+ iput (sbin);
+ iput (etc);
+ */
+ }
+
+ Printk (("umsdos_read_super /mn/: Pseudo should be iput-ed here...\n"));
+
+ iput (pseudo); /* FIXME */
+ }
+
+#endif /* disabled */
+
+ Printk (("umsdos_read_super /mn/: returning %p\n",res));
+ return res;
}
static struct file_system_type umsdos_fs_type = {
- "umsdos",
- FS_REQUIRES_DEV,
- UMSDOS_read_super,
- NULL
+ "umsdos",
+ FS_REQUIRES_DEV,
+ UMSDOS_read_super,
+ NULL
};
__initfunc(int init_umsdos_fs(void))
{
- return register_filesystem(&umsdos_fs_type);
+ return register_filesystem(&umsdos_fs_type);
}
#ifdef MODULE
@@ -513,12 +595,12 @@
int init_module(void)
{
- return init_umsdos_fs();
+ return init_umsdos_fs();
}
void cleanup_module(void)
{
- unregister_filesystem(&umsdos_fs_type);
+ unregister_filesystem(&umsdos_fs_type);
}
#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov