patch-2.1.87 linux/arch/m68k/amiga/s3blit.h

Next file: linux/arch/m68k/amiga/zorro.c
Previous file: linux/arch/m68k/amiga/config.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.86/linux/arch/m68k/amiga/s3blit.h linux/arch/m68k/amiga/s3blit.h
@@ -1,74 +0,0 @@
-/* s3 commands */
-#define S3_BITBLT       0xc011
-#define S3_TWOPOINTLINE 0x2811
-#define S3_FILLEDRECT   0x40b1
-
-#define S3_FIFO_EMPTY 0x0400
-#define S3_HDW_BUSY   0x0200
-
-/* Enhanced register mapping (MMIO mode) */
-
-#define S3_READ_SEL      0xbee8 /* offset f */
-#define S3_MULT_MISC     0xbee8 /* offset e */
-#define S3_ERR_TERM      0x92e8
-#define S3_FRGD_COLOR    0xa6e8
-#define S3_BKGD_COLOR    0xa2e8
-#define S3_PIXEL_CNTL    0xbee8 /* offset a */
-#define S3_FRGD_MIX      0xbae8
-#define S3_BKGD_MIX      0xb6e8
-#define S3_CUR_Y         0x82e8
-#define S3_CUR_X         0x86e8
-#define S3_DESTY_AXSTP   0x8ae8
-#define S3_DESTX_DIASTP  0x8ee8
-#define S3_MIN_AXIS_PCNT 0xbee8 /* offset 0 */
-#define S3_MAJ_AXIS_PCNT 0x96e8
-#define S3_CMD           0x9ae8
-#define S3_GP_STAT       0x9ae8
-#define S3_ADVFUNC_CNTL  0x4ae8
-#define S3_WRT_MASK      0xaae8
-#define S3_RD_MASK       0xaee8
-
-/* Enhanced register mapping (Packed MMIO mode, write only) */
-#define S3_ALT_CURXY     0x8100
-#define S3_ALT_CURXY2    0x8104
-#define S3_ALT_STEP      0x8108
-#define S3_ALT_STEP2     0x810c
-#define S3_ALT_ERR       0x8110
-#define S3_ALT_CMD       0x8118
-#define S3_ALT_MIX       0x8134
-#define S3_ALT_PCNT      0x8148
-#define S3_ALT_PAT       0x8168
-
-/* Drawing modes */
-#define S3_NOTCUR          0x0000
-#define S3_LOGICALZERO     0x0001
-#define S3_LOGICALONE      0x0002
-#define S3_LEAVEASIS       0x0003
-#define S3_NOTNEW          0x0004
-#define S3_CURXORNEW       0x0005
-#define S3_NOT_CURXORNEW   0x0006
-#define S3_NEW             0x0007
-#define S3_NOTCURORNOTNEW  0x0008
-#define S3_CURORNOTNEW     0x0009
-#define S3_NOTCURORNEW     0x000a
-#define S3_CURORNEW        0x000b
-#define S3_CURANDNEW       0x000c
-#define S3_NOTCURANDNEW    0x000d
-#define S3_CURANDNOTNEW    0x000e
-#define S3_NOTCURANDNOTNEW 0x000f
-
-#define S3_CRTC_ADR    0x03d4
-#define S3_CRTC_DATA   0x03d5
-
-#define S3_REG_LOCK2 0x39
-#define S3_HGC_MODE  0x45
-
-#define S3_HWGC_ORGX_H 0x46
-#define S3_HWGC_ORGX_L 0x47
-#define S3_HWGC_ORGY_H 0x48
-#define S3_HWGC_ORGY_L 0x49
-#define S3_HWGC_DX     0x4e
-#define S3_HWGC_DY     0x4f
-
-
-#define S3_LAW_CTL 0x58

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov