patch-2.1.73 linux/include/asm-mips/decstation.h

• Lines: 255
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.1.72/linux/include/asm-mips/decstation.h
• Orig date: Thu Jun 26 12:33:39 1997

diff -u --recursive --new-file v2.1.72/linux/include/asm-mips/decstation.h linux/include/asm-mips/decstation.h
@@ -1,254 +0,0 @@
-/*
- * Hardware info about DEC Personal DECStation systems (otherwise known
- * as maxine or pmax (internal DEC codenames).
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 by Paul M. Antoine, some code and definitions are
- * by curteousy of Chris Fraser.
- *
- * This file is under construction - you were warned!
- */
-
-#ifndef __ASM_MIPS_PMAX_H 
-#define __ASM_MIPS_PMAX_H 
-
-/*
- * The addresses below are virtual address. The mappings are
- * created on startup via wired entries in the tlb.
- */
-
-#define PMAX_LOCAL_IO_SPACE     0xe0000000
-
-/*
- * Motherboard regs (kseg1 addresses)
- */
-#define PMAX_SSR_ADDR		0xbc040100		/* system support reg */
-
-/*
- * SSR defines
- */
-#define PMAX_SSR_LEDMASK	0x00000001		/* power LED */
-
-/*
- * REX functions -- these are for the new TURBOchannel style ROMs
- */
-#define REX_PROM_MAGIC  0x30464354			/* passed in a2 */
-
-#define REX_GETBITMAP		0x84			/* get mem bitmap */
-#define REX_GETCHAR		0x24			/* getch() */
-#define REX_PUTCHAR		0x13			/* putch() */
-#define REX_HALT		0x9c			/* halt the system */
-#define REX_PRINTF		0x30			/* printf() */
-#define REX_PUTS		0x2c			/* puts() */
-#define REX_SLOTADDR		0x6c			/* slotaddr */
-
-#ifndef __LANGUAGE_ASSEMBLY__
-
-extern __inline__ void pmax_set_led(unsigned int bits)
-{
-	volatile unsigned int *led_register = (unsigned int *) PMAX_SSR_ADDR;
-
-	*led_register = bits & PMAX_SSR_LEDMASK;
-}
-
-/*
- * Glue code to call the PMAX boot proms.
- */
-extern asmlinkage void pmax_printf(const char *);
-
-#endif
-
-/*
- * These are just hacked out of the JAZZ ones, no ideas really.
- */
-#define PMAX_KEYBOARD_ADDRESS   0xe0005000
-#define PMAX_KEYBOARD_DATA      0xe0005000
-#define PMAX_KEYBOARD_COMMAND   0xe0005001
-
-#ifndef __LANGUAGE_ASSEMBLY__
-
-typedef struct {
-	unsigned char data;
-	unsigned char command;
-} pmax_keyboard_hardware;
-
-typedef struct {
-	unsigned char pad0[3];
-	unsigned char data;
-	unsigned char pad1[3];
-	unsigned char command;
-} mips_keyboard_hardware;
-
-/*
- * For now.
- */
-#define keyboard_hardware       pmax_keyboard_hardware
-
-#endif
-
-/*
- * Serial ports on DEC - maybe!
- */
-
-#define PMAX_SERIAL1_BASE       (unsigned int)0xe0006000
-#define PMAX_SERIAL2_BASE       (unsigned int)0xe0007000
-
-/*
- * Dummy Device Address. Used in pmaxdma.c
- */
-
-#define PMAX_DUMMY_DEVICE       0xe000d000
-     
-/*
- * PMAX timer registers and interrupt no.
- * Note that the hardware timer interrupt is actually on
- * cpu level 6, but to keep compatibility with PC stuff
- * it is remapped to vector 0. See arch/mips/kernel/entry.S.
- */
-#define PMAX_TIMER_INTERVAL     0xe0000228
-#define PMAX_TIMER_REGISTER     0xe0000230
-
-/*
- * DRAM configuration register
- */
-#ifndef __LANGUAGE_ASSEMBLY__
-#ifdef __MIPSEL__
-typedef struct {
-	unsigned int bank2 : 3;
-	unsigned int bank1 : 3;
-	unsigned int mem_bus_width : 1;
-	unsigned int reserved2 : 1;
-	unsigned int page_mode : 1;
-	unsigned int reserved1 : 23;
-} dram_configuration;
-#else /* defined (__MIPSEB__) */
-typedef struct {
-	unsigned int reserved1 : 23;
-	unsigned int page_mode : 1;
-	unsigned int reserved2 : 1;
-	unsigned int mem_bus_width : 1;
-	unsigned int bank1 : 3;
-	unsigned int bank2 : 3;
-} dram_configuration;
-#endif
-#endif /* __LANGUAGE_ASSEMBLY__ */
-
-#define PMAX_DRAM_CONFIG        0xe00fffe0
-
-/*
- * PMAX interrupt control registers
- */
-#define PMAX_IO_IRQ_SOURCE      0xe0100000
-#define PMAX_IO_IRQ_ENABLE      0xe0100002
-
-/*
- * PMAX interrupt enable bits
- */
-#define PMAX_IE_PARALLEL            (1 << 0)
-#define PMAX_IE_FLOPPY              (1 << 1)
-#define PMAX_IE_SOUND               (1 << 2)
-#define PMAX_IE_VIDEO               (1 << 3)
-#define PMAX_IE_ETHERNET            (1 << 4)
-#define PMAX_IE_SCSI                (1 << 5)
-#define PMAX_IE_KEYBOARD            (1 << 6)
-#define PMAX_IE_MOUSE               (1 << 7)
-#define PMAX_IE_SERIAL1             (1 << 8)
-#define PMAX_IE_SERIAL2             (1 << 9)
-
-/*
- * PMAX Interrupt Level definitions
- */
-
-#define PMAX_TIMER_IRQ          0
-#define PMAX_KEYBOARD_IRQ       1
-#define PMAX_ETHERNET_IRQ       2 /* 15 */
-#define PMAX_SERIAL1_IRQ        3
-#define PMAX_SERIAL2_IRQ        4
-#define PMAX_PARALLEL_IRQ       5
-#define PMAX_FLOPPY_IRQ         6 /* needs to be consistent with floppy driver! */
-
-/*
- * PMAX DMA Channels
- * Note: Channels 4...7 are not used with respect to the Acer PICA-61
- * chipset which does not provide these DMA channels.
- */
-
-#define PMAX_SCSI_DMA           0              /* SCSI */
-#define PMAX_FLOPPY_DMA         1              /* FLOPPY */
-#define PMAX_AUDIOL_DMA         2              /* AUDIO L */
-#define PMAX_AUDIOR_DMA         3              /* AUDIO R */
-
-/*
- * PMAX R4030 MCT_ADR chip (DMA controller)
- * Note: Virtual Addresses !
- */
-
-#define PMAX_R4030_CONFIG	0xE0000000	/* R4030 config register */
-#define PMAX_R4030_REVISION     0xE0000008	/* same as PICA_ASIC_REVISION */
-#define PMAX_R4030_INV_ADDR	0xE0000010	/* Invalid Address register */
-
-#define PMAX_R4030_TRSTBL_BASE  0xE0000018	/* Translation Table Base */
-#define PMAX_R4030_TRSTBL_LIM   0xE0000020	/* Translation Table Limit */
-#define PMAX_R4030_TRSTBL_INV   0xE0000028	/* Translation Table Invalidate */
-
-#define PMAX_R4030_CACHE_MTNC   0xE0000030	/* Cache Maintenance */
-#define PMAX_R4030_R_FAIL_ADDR  0xE0000038	/* Remote Failed Address */
-#define PMAX_R4030_M_FAIL_ADDR  0xE0000040	/* Memory Failed Adresss */
-
-#define PMAX_R4030_CACHE_PTAG   0xE0000048	/* I/O Cache Physical Tag */
-#define PMAX_R4030_CACHE_LTAG   0xE0000050	/* I/O Cache Logical Tag */
-#define PMAX_R4030_CACHE_BMASK  0xE0000058	/* I/O Cache Byte Mask */
-#define PMAX_R4030_CACHE_BWIN   0xE0000060	/* I/O Cache Buffer Window */
-
-/*
- * Remote Speed Registers. 
- *
- *  0: free,      1: Ethernet,  2: SCSI,      3: Floppy,
- *  4: RTC,       5: Kb./Mouse  6: serial 1,  7: serial 2,
- *  8: parallel,  9: NVRAM,    10: CPU,      11: PROM,
- * 12: reserved, 13: free,     14: 7seg LED, 15: ???
- */
-
-#define PMAX_R4030_REM_SPEED	0xE0000070	/* 16 Remote Speed Registers */
-						/* 0xE0000070,78,80... 0xE00000E8 */
-#define PMAX_R4030_IRQ_ENABLE   0xE00000E8	/* Internal Interrupt Enable */
-
-#define PMAX_R4030_IRQ_SOURCE   0xE0000200	/* Interrupt Source Reg */
-#define PMAX_R4030_I386_ERROR   0xE0000208	/* i386/EISA Bus Error */
-
-
-/*
- * Access the R4030 DMA and I/O Controller
- */
-
-#ifndef __LANGUAGE_ASSEMBLY__
-
-extern inline unsigned short r4030_read_reg16(unsigned addr) {
-	unsigned short ret = *((volatile unsigned short *)addr);
-	__asm__ __volatile__("nop; nop; nop; nop;");
-	return ret;
-}
-
-extern inline unsigned int r4030_read_reg32(unsigned addr) {
-	unsigned int ret = *((volatile unsigned int *)addr);
-	__asm__ __volatile__("nop; nop; nop; nop;");
-	return ret;
-}
-
-extern inline void r4030_write_reg16(unsigned addr, unsigned val) {
-	*((volatile unsigned short *)addr) = val;
-	__asm__ __volatile__("nop; nop; nop; nop;");
-}
-
-extern inline unsigned int r4030_write_reg32(unsigned addr, unsigned val) {
-	*((volatile unsigned int *)addr) = val;
-	__asm__ __volatile__("nop; nop; nop; nop;");
-}
-
-#endif /* !LANGUAGE_ASSEMBLY__ */
-
-	
-#endif /* __ASM_MIPS_PMAX_H */