patch-2.1.71 linux/drivers/net/soundmodem/sm.c
Next file: linux/drivers/net/soundmodem/sm.h
Previous file: linux/drivers/net/soundmodem/gentbl.c
Back to the patch index
Back to the overall index
- Lines: 899
- Date:
Wed Dec 31 16:00:00 1969
- Orig file:
v2.1.70/linux/drivers/net/soundmodem/sm.c
- Orig date:
Mon Aug 11 14:47:04 1997
diff -u --recursive --new-file v2.1.70/linux/drivers/net/soundmodem/sm.c linux/drivers/net/soundmodem/sm.c
@@ -1,898 +0,0 @@
-/*****************************************************************************/
-
-/*
- * sm.c -- soundcard radio modem driver.
- *
- * Copyright (C) 1996 Thomas Sailer (sailer@ife.ee.ethz.ch)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Please note that the GPL allows you to use the driver, NOT the radio.
- * In order to use the radio, you need a license from the communications
- * authority of your country.
- *
- *
- * Command line options (insmod command line)
- *
- * mode mode string; eg. "wss:afsk1200"
- * iobase base address of the soundcard; common values are 0x220 for sbc,
- * 0x530 for wss
- * irq interrupt number; common values are 7 or 5 for sbc, 11 for wss
- * dma dma number; common values are 0 or 1
- *
- *
- * History:
- * 0.1 21.09.96 Started
- * 18.10.96 Changed to new user space access routines (copy_{to,from}_user)
- * 0.4 21.01.97 Separately compileable soundcard/modem modules
- * 0.5 03.03.97 fixed LPT probing (check_lpt result was interpreted the wrong way round)
- * 0.6 16.04.97 init code/data tagged
- * 0.7 30.07.97 fixed halfduplex interrupt handlers/hotfix for CS423X
- */
-
-/*****************************************************************************/
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/ioport.h>
-#include <linux/net.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/bitops.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include "sm.h"
-
-/* --------------------------------------------------------------------- */
-
-/*
- * currently this module is supposed to support both module styles, i.e.
- * the old one present up to about 2.1.9, and the new one functioning
- * starting with 2.1.21. The reason is I have a kit allowing to compile
- * this module also under 2.0.x which was requested by several people.
- * This will go in 2.2
- */
-#include <linux/version.h>
-
-#if LINUX_VERSION_CODE >= 0x20100
-#include <asm/uaccess.h>
-#else
-#include <asm/segment.h>
-#include <linux/mm.h>
-
-#undef put_user
-#undef get_user
-
-#define put_user(x,ptr) ({ __put_user((unsigned long)(x),(ptr),sizeof(*(ptr))); 0; })
-#define get_user(x,ptr) ({ x = ((__typeof__(*(ptr)))__get_user((ptr),sizeof(*(ptr)))); 0; })
-
-extern inline int copy_from_user(void *to, const void *from, unsigned long n)
-{
- int i = verify_area(VERIFY_READ, from, n);
- if (i)
- return i;
- memcpy_fromfs(to, from, n);
- return 0;
-}
-
-extern inline int copy_to_user(void *to, const void *from, unsigned long n)
-{
- int i = verify_area(VERIFY_WRITE, to, n);
- if (i)
- return i;
- memcpy_tofs(to, from, n);
- return 0;
-}
-#endif
-
-#if LINUX_VERSION_CODE >= 0x20123
-#include <linux/init.h>
-#else
-#define __init
-#define __initdata
-#define __initfunc(x) x
-#endif
-
-/* --------------------------------------------------------------------- */
-
-/*static*/ const char sm_drvname[] = "soundmodem";
-static const char sm_drvinfo[] = KERN_INFO "soundmodem: (C) 1996-1997 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "soundmodem: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
-
-/* --------------------------------------------------------------------- */
-
-/*static*/ const struct modem_tx_info *sm_modem_tx_table[] = {
-#ifdef CONFIG_SOUNDMODEM_AFSK1200
- &sm_afsk1200_tx,
-#endif /* CONFIG_SOUNDMODEM_AFSK1200 */
-#ifdef CONFIG_SOUNDMODEM_AFSK2400_7
- &sm_afsk2400_7_tx,
-#endif /* CONFIG_SOUNDMODEM_AFSK2400_7 */
-#ifdef CONFIG_SOUNDMODEM_AFSK2400_8
- &sm_afsk2400_8_tx,
-#endif /* CONFIG_SOUNDMODEM_AFSK2400_8 */
-#ifdef CONFIG_SOUNDMODEM_AFSK2666
- &sm_afsk2666_tx,
-#endif /* CONFIG_SOUNDMODEM_AFSK2666 */
-#ifdef CONFIG_SOUNDMODEM_PSK4800
- &sm_psk4800_tx,
-#endif /* CONFIG_SOUNDMODEM_PSK4800 */
-#ifdef CONFIG_SOUNDMODEM_HAPN4800
- &sm_hapn4800_8_tx,
- &sm_hapn4800_10_tx,
- &sm_hapn4800_pm8_tx,
- &sm_hapn4800_pm10_tx,
-#endif /* CONFIG_SOUNDMODEM_HAPN4800 */
-#ifdef CONFIG_SOUNDMODEM_FSK9600
- &sm_fsk9600_4_tx,
- &sm_fsk9600_5_tx,
-#endif /* CONFIG_SOUNDMODEM_FSK9600 */
- NULL
-};
-
-/*static*/ const struct modem_rx_info *sm_modem_rx_table[] = {
-#ifdef CONFIG_SOUNDMODEM_AFSK1200
- &sm_afsk1200_rx,
-#endif /* CONFIG_SOUNDMODEM_AFSK1200 */
-#ifdef CONFIG_SOUNDMODEM_AFSK2400_7
- &sm_afsk2400_7_rx,
-#endif /* CONFIG_SOUNDMODEM_AFSK2400_7 */
-#ifdef CONFIG_SOUNDMODEM_AFSK2400_8
- &sm_afsk2400_8_rx,
-#endif /* CONFIG_SOUNDMODEM_AFSK2400_8 */
-#ifdef CONFIG_SOUNDMODEM_AFSK2666
- &sm_afsk2666_rx,
-#endif /* CONFIG_SOUNDMODEM_AFSK2666 */
-#ifdef CONFIG_SOUNDMODEM_PSK4800
- &sm_psk4800_rx,
-#endif /* CONFIG_SOUNDMODEM_PSK4800 */
-#ifdef CONFIG_SOUNDMODEM_HAPN4800
- &sm_hapn4800_8_rx,
- &sm_hapn4800_10_rx,
- &sm_hapn4800_pm8_rx,
- &sm_hapn4800_pm10_rx,
-#endif /* CONFIG_SOUNDMODEM_HAPN4800 */
-#ifdef CONFIG_SOUNDMODEM_FSK9600
- &sm_fsk9600_4_rx,
- &sm_fsk9600_5_rx,
-#endif /* CONFIG_SOUNDMODEM_FSK9600 */
- NULL
-};
-
-static const struct hardware_info *sm_hardware_table[] = {
-#ifdef CONFIG_SOUNDMODEM_SBC
- &sm_hw_sbc,
- &sm_hw_sbcfdx,
-#endif /* CONFIG_SOUNDMODEM_SBC */
-#ifdef CONFIG_SOUNDMODEM_WSS
- &sm_hw_wss,
- &sm_hw_wssfdx,
-#endif /* CONFIG_SOUNDMODEM_WSS */
- NULL
-};
-
-/* --------------------------------------------------------------------- */
-
-#define NR_PORTS 4
-
-/* --------------------------------------------------------------------- */
-
-static struct device sm_device[NR_PORTS];
-
-static struct {
- char *mode;
- int iobase, irq, dma, dma2, seriobase, pariobase, midiiobase;
-} sm_ports[NR_PORTS] = {
- { NULL, -1, 0, 0, 0, -1, -1, -1 },
-};
-
-/* --------------------------------------------------------------------- */
-
-#define UART_RBR(iobase) (iobase+0)
-#define UART_THR(iobase) (iobase+0)
-#define UART_IER(iobase) (iobase+1)
-#define UART_IIR(iobase) (iobase+2)
-#define UART_FCR(iobase) (iobase+2)
-#define UART_LCR(iobase) (iobase+3)
-#define UART_MCR(iobase) (iobase+4)
-#define UART_LSR(iobase) (iobase+5)
-#define UART_MSR(iobase) (iobase+6)
-#define UART_SCR(iobase) (iobase+7)
-#define UART_DLL(iobase) (iobase+0)
-#define UART_DLM(iobase) (iobase+1)
-
-#define SER_EXTENT 8
-
-#define LPT_DATA(iobase) (iobase+0)
-#define LPT_STATUS(iobase) (iobase+1)
-#define LPT_CONTROL(iobase) (iobase+2)
-#define LPT_IRQ_ENABLE 0x10
-
-#define LPT_EXTENT 3
-
-#define MIDI_DATA(iobase) (iobase)
-#define MIDI_STATUS(iobase) (iobase+1)
-#define MIDI_READ_FULL 0x80 /* attention: negative logic!! */
-#define MIDI_WRITE_EMPTY 0x40 /* attention: negative logic!! */
-
-#define MIDI_EXTENT 2
-
-/* ---------------------------------------------------------------------- */
-
-#define PARAM_TXDELAY 1
-#define PARAM_PERSIST 2
-#define PARAM_SLOTTIME 3
-#define PARAM_TXTAIL 4
-#define PARAM_FULLDUP 5
-#define PARAM_HARDWARE 6
-#define PARAM_RETURN 255
-
-#define SP_SER 1
-#define SP_PAR 2
-#define SP_MIDI 4
-
-/* --------------------------------------------------------------------- */
-/*
- * ===================== port checking routines ========================
- */
-
-/*
- * returns 0 if ok and != 0 on error;
- * the same behaviour as par96_check_lpt in baycom.c
- */
-
-/*
- * returns 0 if ok and != 0 on error;
- * the same behaviour as par96_check_lpt in baycom.c
- */
-
-static int check_lpt(unsigned int iobase)
-{
- unsigned char b1,b2;
- int i;
-
- if (iobase <= 0 || iobase > 0x1000-LPT_EXTENT)
- return 0;
- if (check_region(iobase, LPT_EXTENT))
- return 0;
- b1 = inb(LPT_DATA(iobase));
- b2 = inb(LPT_CONTROL(iobase));
- outb(0xaa, LPT_DATA(iobase));
- i = inb(LPT_DATA(iobase)) == 0xaa;
- outb(0x55, LPT_DATA(iobase));
- i &= inb(LPT_DATA(iobase)) == 0x55;
- outb(0x0a, LPT_CONTROL(iobase));
- i &= (inb(LPT_CONTROL(iobase)) & 0xf) == 0x0a;
- outb(0x05, LPT_CONTROL(iobase));
- i &= (inb(LPT_CONTROL(iobase)) & 0xf) == 0x05;
- outb(b1, LPT_DATA(iobase));
- outb(b2, LPT_CONTROL(iobase));
- return !i;
-}
-
-/* --------------------------------------------------------------------- */
-
-enum uart { c_uart_unknown, c_uart_8250,
- c_uart_16450, c_uart_16550, c_uart_16550A};
-static const char *uart_str[] =
- { "unknown", "8250", "16450", "16550", "16550A" };
-
-static enum uart check_uart(unsigned int iobase)
-{
- unsigned char b1,b2,b3;
- enum uart u;
- enum uart uart_tab[] =
- { c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A };
-
- if (iobase <= 0 || iobase > 0x1000-SER_EXTENT)
- return c_uart_unknown;
- if (check_region(iobase, SER_EXTENT))
- return c_uart_unknown;
- b1 = inb(UART_MCR(iobase));
- outb(b1 | 0x10, UART_MCR(iobase)); /* loopback mode */
- b2 = inb(UART_MSR(iobase));
- outb(0x1a, UART_MCR(iobase));
- b3 = inb(UART_MSR(iobase)) & 0xf0;
- outb(b1, UART_MCR(iobase)); /* restore old values */
- outb(b2, UART_MSR(iobase));
- if (b3 != 0x90)
- return c_uart_unknown;
- inb(UART_RBR(iobase));
- inb(UART_RBR(iobase));
- outb(0x01, UART_FCR(iobase)); /* enable FIFOs */
- u = uart_tab[(inb(UART_IIR(iobase)) >> 6) & 3];
- if (u == c_uart_16450) {
- outb(0x5a, UART_SCR(iobase));
- b1 = inb(UART_SCR(iobase));
- outb(0xa5, UART_SCR(iobase));
- b2 = inb(UART_SCR(iobase));
- if ((b1 != 0x5a) || (b2 != 0xa5))
- u = c_uart_8250;
- }
- return u;
-}
-
-/* --------------------------------------------------------------------- */
-
-static int check_midi(unsigned int iobase)
-{
- unsigned long timeout;
- unsigned long flags;
- unsigned char b;
-
- if (iobase <= 0 || iobase > 0x1000-MIDI_EXTENT)
- return 0;
- if (check_region(iobase, MIDI_EXTENT))
- return 0;
- timeout = jiffies + (HZ / 100);
- while (inb(MIDI_STATUS(iobase)) & MIDI_WRITE_EMPTY)
- if ((signed)(jiffies - timeout) > 0)
- return 0;
- save_flags(flags);
- cli();
- outb(0xff, MIDI_DATA(iobase));
- b = inb(MIDI_STATUS(iobase));
- restore_flags(flags);
- if (!(b & MIDI_WRITE_EMPTY))
- return 0;
- while (inb(MIDI_STATUS(iobase)) & MIDI_WRITE_EMPTY)
- if ((signed)(jiffies - timeout) > 0)
- return 0;
- return 1;
-}
-
-/* --------------------------------------------------------------------- */
-
-void sm_output_status(struct sm_state *sm)
-{
- int invert_dcd = 0;
- int invert_ptt = 0;
-
- int ptt = /*hdlcdrv_ptt(&sm->hdrv)*/(sm->dma.ptt_cnt > 0) ^ invert_ptt;
- int dcd = (!!sm->hdrv.hdlcrx.dcd) ^ invert_dcd;
-
- if (sm->hdrv.ptt_out.flags & SP_SER) {
- outb(dcd | (ptt << 1), UART_MCR(sm->hdrv.ptt_out.seriobase));
- outb(0x40 & (-ptt), UART_LCR(sm->hdrv.ptt_out.seriobase));
- }
- if (sm->hdrv.ptt_out.flags & SP_PAR) {
- outb(ptt | (dcd << 1), LPT_DATA(sm->hdrv.ptt_out.pariobase));
- }
- if (sm->hdrv.ptt_out.flags & SP_MIDI && hdlcdrv_ptt(&sm->hdrv)) {
- outb(0, MIDI_DATA(sm->hdrv.ptt_out.midiiobase));
- }
-}
-
-/* --------------------------------------------------------------------- */
-
-static void sm_output_open(struct sm_state *sm)
-{
- enum uart u = c_uart_unknown;
-
- sm->hdrv.ptt_out.flags = 0;
- if (sm->hdrv.ptt_out.seriobase > 0 &&
- sm->hdrv.ptt_out.seriobase <= 0x1000-SER_EXTENT &&
- ((u = check_uart(sm->hdrv.ptt_out.seriobase))) != c_uart_unknown) {
- sm->hdrv.ptt_out.flags |= SP_SER;
- request_region(sm->hdrv.ptt_out.seriobase, SER_EXTENT, "sm ser ptt");
- outb(0, UART_IER(sm->hdrv.ptt_out.seriobase));
- /* 5 bits, 1 stop, no parity, no break, Div latch access */
- outb(0x80, UART_LCR(sm->hdrv.ptt_out.seriobase));
- outb(0, UART_DLM(sm->hdrv.ptt_out.seriobase));
- outb(1, UART_DLL(sm->hdrv.ptt_out.seriobase)); /* as fast as possible */
- /* LCR and MCR set by output_status */
- }
- if (sm->hdrv.ptt_out.pariobase > 0 &&
- sm->hdrv.ptt_out.pariobase <= 0x1000-LPT_EXTENT &&
- !check_lpt(sm->hdrv.ptt_out.pariobase)) {
- sm->hdrv.ptt_out.flags |= SP_PAR;
- request_region(sm->hdrv.ptt_out.pariobase, LPT_EXTENT, "sm par ptt");
- }
- if (sm->hdrv.ptt_out.midiiobase > 0 &&
- sm->hdrv.ptt_out.midiiobase <= 0x1000-MIDI_EXTENT &&
- check_midi(sm->hdrv.ptt_out.midiiobase)) {
- sm->hdrv.ptt_out.flags |= SP_MIDI;
- request_region(sm->hdrv.ptt_out.midiiobase, MIDI_EXTENT,
- "sm midi ptt");
- }
- sm_output_status(sm);
-
- printk(KERN_INFO "%s: ptt output:", sm_drvname);
- if (sm->hdrv.ptt_out.flags & SP_SER)
- printk(" serial interface at 0x%x, uart %s", sm->hdrv.ptt_out.seriobase,
- uart_str[u]);
- if (sm->hdrv.ptt_out.flags & SP_PAR)
- printk(" parallel interface at 0x%x", sm->hdrv.ptt_out.pariobase);
- if (sm->hdrv.ptt_out.flags & SP_MIDI)
- printk(" mpu401 (midi) interface at 0x%x", sm->hdrv.ptt_out.midiiobase);
- if (!sm->hdrv.ptt_out.flags)
- printk(" none");
- printk("\n");
-}
-
-/* --------------------------------------------------------------------- */
-
-static void sm_output_close(struct sm_state *sm)
-{
- /* release regions used for PTT output */
- sm->hdrv.hdlctx.ptt = sm->hdrv.hdlctx.calibrate = 0;
- sm_output_status(sm);
- if (sm->hdrv.ptt_out.flags & SP_SER)
- release_region(sm->hdrv.ptt_out.seriobase, SER_EXTENT);
- if (sm->hdrv.ptt_out.flags & SP_PAR)
- release_region(sm->hdrv.ptt_out.pariobase, LPT_EXTENT);
- if (sm->hdrv.ptt_out.flags & SP_MIDI)
- release_region(sm->hdrv.ptt_out.midiiobase, MIDI_EXTENT);
- sm->hdrv.ptt_out.flags = 0;
-}
-
-/* --------------------------------------------------------------------- */
-
-static int sm_open(struct device *dev);
-static int sm_close(struct device *dev);
-static int sm_ioctl(struct device *dev, struct ifreq *ifr,
- struct hdlcdrv_ioctl *hi, int cmd);
-
-/* --------------------------------------------------------------------- */
-
-static const struct hdlcdrv_ops sm_ops = {
- sm_drvname, sm_drvinfo, sm_open, sm_close, sm_ioctl
-};
-
-/* --------------------------------------------------------------------- */
-
-static int sm_open(struct device *dev)
-{
- struct sm_state *sm;
- int err;
-
- if (!dev || !dev->priv ||
- ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
- printk(KERN_ERR "sm_open: invalid device struct\n");
- return -EINVAL;
- }
- sm = (struct sm_state *)dev->priv;
-
- if (!sm->mode_tx || !sm->mode_rx || !sm->hwdrv || !sm->hwdrv->open)
- return -ENODEV;
- sm->hdrv.par.bitrate = sm->mode_rx->bitrate;
- err = sm->hwdrv->open(dev, sm);
- if (err)
- return err;
- sm_output_open(sm);
- MOD_INC_USE_COUNT;
- printk(KERN_INFO "%s: %s mode %s.%s at iobase 0x%lx irq %u dma %u dma2 %u\n",
- sm_drvname, sm->hwdrv->hw_name, sm->mode_tx->name,
- sm->mode_rx->name, dev->base_addr, dev->irq, dev->dma, sm->hdrv.ptt_out.dma2);
- return 0;
-}
-
-/* --------------------------------------------------------------------- */
-
-static int sm_close(struct device *dev)
-{
- struct sm_state *sm;
- int err = -ENODEV;
-
- if (!dev || !dev->priv ||
- ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
- printk(KERN_ERR "sm_close: invalid device struct\n");
- return -EINVAL;
- }
- sm = (struct sm_state *)dev->priv;
-
-
- if (sm->hwdrv && sm->hwdrv->close)
- err = sm->hwdrv && sm->hwdrv->close(dev, sm);
- sm_output_close(sm);
- MOD_DEC_USE_COUNT;
- printk(KERN_INFO "%s: close %s at iobase 0x%lx irq %u dma %u\n",
- sm_drvname, sm->hwdrv->hw_name, dev->base_addr, dev->irq, dev->dma);
- return err;
-}
-
-/* --------------------------------------------------------------------- */
-
-static int sethw(struct device *dev, struct sm_state *sm, char *mode)
-{
- char *cp = strchr(mode, ':');
- const struct hardware_info **hwp = sm_hardware_table;
-
- if (!cp)
- cp = mode;
- else {
- *cp++ = '\0';
- while (hwp && (*hwp) && (*hwp)->hw_name && strcmp((*hwp)->hw_name, mode))
- hwp++;
- if (!hwp || !*hwp || !(*hwp)->hw_name)
- return -EINVAL;
- if ((*hwp)->loc_storage > sizeof(sm->hw)) {
- printk(KERN_ERR "%s: insufficient storage for hw driver %s (%d)\n",
- sm_drvname, (*hwp)->hw_name, (*hwp)->loc_storage);
- return -EINVAL;
- }
- sm->hwdrv = *hwp;
- }
- if (!*cp)
- return 0;
- if (sm->hwdrv && sm->hwdrv->sethw)
- return sm->hwdrv->sethw(dev, sm, cp);
- return -EINVAL;
-}
-
-/* --------------------------------------------------------------------- */
-
-static int sm_ioctl(struct device *dev, struct ifreq *ifr,
- struct hdlcdrv_ioctl *hi, int cmd)
-{
- struct sm_state *sm;
- struct sm_ioctl bi;
- unsigned long flags;
- unsigned int newdiagmode;
- unsigned int newdiagflags;
- char *cp;
- const struct modem_tx_info **mtp = sm_modem_tx_table;
- const struct modem_rx_info **mrp = sm_modem_rx_table;
- const struct hardware_info **hwp = sm_hardware_table;
-
- if (!dev || !dev->priv ||
- ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
- printk(KERN_ERR "sm_ioctl: invalid device struct\n");
- return -EINVAL;
- }
- sm = (struct sm_state *)dev->priv;
-
- if (cmd != SIOCDEVPRIVATE) {
- if (!sm->hwdrv || !sm->hwdrv->ioctl)
- return sm->hwdrv->ioctl(dev, sm, ifr, hi, cmd);
- return -ENOIOCTLCMD;
- }
- switch (hi->cmd) {
- default:
- if (sm->hwdrv && sm->hwdrv->ioctl)
- return sm->hwdrv->ioctl(dev, sm, ifr, hi, cmd);
- return -ENOIOCTLCMD;
-
- case HDLCDRVCTL_GETMODE:
- cp = hi->data.modename;
- if (sm->hwdrv && sm->hwdrv->hw_name)
- cp += sprintf(cp, "%s:", sm->hwdrv->hw_name);
- else
- cp += sprintf(cp, "<unspec>:");
- if (sm->mode_tx && sm->mode_tx->name)
- cp += sprintf(cp, "%s", sm->mode_tx->name);
- else
- cp += sprintf(cp, "<unspec>");
- if (!sm->mode_rx || !sm->mode_rx ||
- strcmp(sm->mode_rx->name, sm->mode_tx->name)) {
- if (sm->mode_rx && sm->mode_rx->name)
- cp += sprintf(cp, ",%s", sm->mode_rx->name);
- else
- cp += sprintf(cp, ",<unspec>");
- }
- if (copy_to_user(ifr->ifr_data, hi, sizeof(*hi)))
- return -EFAULT;
- return 0;
-
- case HDLCDRVCTL_SETMODE:
- if (!suser() || dev->start)
- return -EACCES;
- hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
- return sethw(dev, sm, hi->data.modename);
-
- case HDLCDRVCTL_MODELIST:
- cp = hi->data.modename;
- while (*hwp) {
- if ((*hwp)->hw_name)
- cp += sprintf("%s:,", (*hwp)->hw_name);
- hwp++;
- }
- while (*mtp) {
- if ((*mtp)->name)
- cp += sprintf(">%s,", (*mtp)->name);
- mtp++;
- }
- while (*mrp) {
- if ((*mrp)->name)
- cp += sprintf("<%s,", (*mrp)->name);
- mrp++;
- }
- cp[-1] = '\0';
- if (copy_to_user(ifr->ifr_data, hi, sizeof(*hi)))
- return -EFAULT;
- return 0;
-
-#ifdef SM_DEBUG
- case SMCTL_GETDEBUG:
- if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
- return -EFAULT;
- bi.data.dbg.int_rate = sm->debug_vals.last_intcnt;
- bi.data.dbg.mod_cycles = sm->debug_vals.mod_cyc;
- bi.data.dbg.demod_cycles = sm->debug_vals.demod_cyc;
- bi.data.dbg.dma_residue = sm->debug_vals.dma_residue;
- sm->debug_vals.mod_cyc = sm->debug_vals.demod_cyc =
- sm->debug_vals.dma_residue = 0;
- if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
- return -EFAULT;
- return 0;
-#endif /* SM_DEBUG */
-
- case SMCTL_DIAGNOSE:
- if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
- return -EFAULT;
- newdiagmode = bi.data.diag.mode;
- newdiagflags = bi.data.diag.flags;
- if (newdiagmode > SM_DIAGMODE_CONSTELLATION)
- return -EINVAL;
- bi.data.diag.mode = sm->diag.mode;
- bi.data.diag.flags = sm->diag.flags;
- bi.data.diag.samplesperbit = sm->mode_rx->sperbit;
- if (sm->diag.mode != newdiagmode) {
- save_flags(flags);
- cli();
- sm->diag.ptr = -1;
- sm->diag.flags = newdiagflags & ~SM_DIAGFLAG_VALID;
- sm->diag.mode = newdiagmode;
- restore_flags(flags);
- if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
- return -EFAULT;
- return 0;
- }
- if (sm->diag.ptr < 0 || sm->diag.mode == SM_DIAGMODE_OFF) {
- if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
- return -EFAULT;
- return 0;
- }
- if (bi.data.diag.datalen > DIAGDATALEN)
- bi.data.diag.datalen = DIAGDATALEN;
- if (sm->diag.ptr < bi.data.diag.datalen) {
- if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
- return -EFAULT;
- return 0;
- }
- if (copy_to_user(bi.data.diag.data, sm->diag.data,
- bi.data.diag.datalen * sizeof(short)))
- return -EFAULT;
- bi.data.diag.flags |= SM_DIAGFLAG_VALID;
- save_flags(flags);
- cli();
- sm->diag.ptr = -1;
- sm->diag.flags = newdiagflags & ~SM_DIAGFLAG_VALID;
- sm->diag.mode = newdiagmode;
- restore_flags(flags);
- if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
- return -EFAULT;
- return 0;
- }
-}
-
-/* --------------------------------------------------------------------- */
-
-#ifdef __i386__
-
-int sm_x86_capability = 0;
-
-__initfunc(static void i386_capability(void))
-{
- unsigned long flags;
- unsigned long fl1;
- union {
- struct {
- unsigned int ebx, edx, ecx;
- } r;
- unsigned char s[13];
- } id;
- unsigned int eax;
-
- save_flags(flags);
- flags |= 0x200000;
- restore_flags(flags);
- save_flags(flags);
- fl1 = flags;
- flags &= ~0x200000;
- restore_flags(flags);
- save_flags(flags);
- if (!(fl1 & 0x200000) || (flags & 0x200000)) {
- printk(KERN_WARNING "%s: cpu does not support CPUID\n", sm_drvname);
- return;
- }
- __asm__ ("cpuid" : "=a" (eax), "=b" (id.r.ebx), "=c" (id.r.ecx), "=d" (id.r.edx) :
- "0" (0));
- id.s[12] = 0;
- if (eax < 1) {
- printk(KERN_WARNING "%s: cpu (vendor string %s) does not support capability "
- "list\n", sm_drvname, id.s);
- return;
- }
- printk(KERN_INFO "%s: cpu: vendor string %s ", sm_drvname, id.s);
- __asm__ ("cpuid" : "=a" (eax), "=d" (sm_x86_capability) : "0" (1) : "ebx", "ecx");
- printk("fam %d mdl %d step %d cap 0x%x\n", (eax >> 8) & 15, (eax >> 4) & 15,
- eax & 15, sm_x86_capability);
-}
-#endif /* __i386__ */
-
-/* --------------------------------------------------------------------- */
-
-#ifdef MODULE
-__initfunc(static int sm_init(void))
-#else /* MODULE */
-__initfunc(int sm_init(void))
-#endif /* MODULE */
-{
- int i, j, found = 0;
- char set_hw = 1;
- struct sm_state *sm;
- char ifname[HDLCDRV_IFNAMELEN];
-
- printk(sm_drvinfo);
-#ifdef __i386__
- i386_capability();
-#endif /* __i386__ */
- /*
- * register net devices
- */
- for (i = 0; i < NR_PORTS; i++) {
- struct device *dev = sm_device+i;
- sprintf(ifname, "sm%d", i);
-
- if (!sm_ports[i].mode)
- set_hw = 0;
- if (!set_hw)
- sm_ports[i].iobase = sm_ports[i].irq = 0;
- j = hdlcdrv_register_hdlcdrv(dev, &sm_ops, sizeof(struct sm_state),
- ifname, sm_ports[i].iobase,
- sm_ports[i].irq, sm_ports[i].dma);
- if (!j) {
- sm = (struct sm_state *)dev->priv;
- sm->hdrv.ptt_out.dma2 = sm_ports[i].dma2;
- sm->hdrv.ptt_out.seriobase = sm_ports[i].seriobase;
- sm->hdrv.ptt_out.pariobase = sm_ports[i].pariobase;
- sm->hdrv.ptt_out.midiiobase = sm_ports[i].midiiobase;
- if (set_hw && sethw(dev, sm, sm_ports[i].mode))
- set_hw = 0;
- found++;
- } else {
- printk(KERN_WARNING "%s: cannot register net device\n",
- sm_drvname);
- }
- }
- if (!found)
- return -ENXIO;
- return 0;
-}
-
-/* --------------------------------------------------------------------- */
-
-#ifdef MODULE
-
-/*
- * command line settable parameters
- */
-static char *mode = NULL;
-static int iobase = -1;
-static int irq = -1;
-static int dma = -1;
-static int dma2 = -1;
-static int serio = 0;
-static int pario = 0;
-static int midiio = 0;
-
-#if LINUX_VERSION_CODE >= 0x20115
-
-MODULE_PARM(mode, "s");
-MODULE_PARM_DESC(mode, "soundmodem operating mode; eg. sbc:afsk1200 or wss:fsk9600");
-MODULE_PARM(iobase, "i");
-MODULE_PARM_DESC(iobase, "soundmodem base address");
-MODULE_PARM(irq, "i");
-MODULE_PARM_DESC(irq, "soundmodem interrupt");
-MODULE_PARM(dma, "i");
-MODULE_PARM_DESC(dma, "soundmodem dma channel");
-MODULE_PARM(dma2, "i");
-MODULE_PARM_DESC(dma2, "soundmodem 2nd dma channel; full duplex only");
-MODULE_PARM(serio, "i");
-MODULE_PARM_DESC(serio, "soundmodem PTT output on serial port");
-MODULE_PARM(pario, "i");
-MODULE_PARM_DESC(pario, "soundmodem PTT output on parallel port");
-MODULE_PARM(midiio, "i");
-MODULE_PARM_DESC(midiio, "soundmodem PTT output on midi port");
-
-MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
-MODULE_DESCRIPTION("Soundcard amateur radio modem driver");
-
-#endif
-
-__initfunc(int init_module(void))
-{
- if (mode) {
- if (iobase == -1)
- iobase = (!strncmp(mode, "sbc", 3)) ? 0x220 : 0x530;
- if (irq == -1)
- irq = (!strncmp(mode, "sbc", 3)) ? 5 : 11;
- if (dma == -1)
- dma = 1;
- }
- sm_ports[0].mode = mode;
- sm_ports[0].iobase = iobase;
- sm_ports[0].irq = irq;
- sm_ports[0].dma = dma;
- sm_ports[0].dma2 = dma2;
- sm_ports[0].seriobase = serio;
- sm_ports[0].pariobase = pario;
- sm_ports[0].midiiobase = midiio;
- sm_ports[1].mode = NULL;
-
- return sm_init();
-}
-
-/* --------------------------------------------------------------------- */
-
-void cleanup_module(void)
-{
- int i;
-
- printk(KERN_INFO "sm: cleanup_module called\n");
-
- for(i = 0; i < NR_PORTS; i++) {
- struct device *dev = sm_device+i;
- struct sm_state *sm = (struct sm_state *)dev->priv;
-
- if (sm) {
- if (sm->hdrv.magic != HDLCDRV_MAGIC)
- printk(KERN_ERR "sm: invalid magic in "
- "cleanup_module\n");
- else
- hdlcdrv_unregister_hdlcdrv(dev);
- }
- }
-}
-
-#else /* MODULE */
-/* --------------------------------------------------------------------- */
-/*
- * format: sm=io,irq,dma[,dma2[,serio[,pario]]],mode
- * mode: hw:modem
- * hw: sbc, wss, wssfdx
- * modem: afsk1200, fsk9600
- */
-
-__initfunc(void sm_setup(char *str, int *ints))
-{
- int i;
-
- for (i = 0; (i < NR_PORTS) && (sm_ports[i].mode); i++);
- if ((i >= NR_PORTS) || (ints[0] < 3)) {
- printk(KERN_INFO "%s: too many or invalid interface "
- "specifications\n", sm_drvname);
- return;
- }
- sm_ports[i].mode = str;
- sm_ports[i].iobase = ints[1];
- sm_ports[i].irq = ints[2];
- sm_ports[i].dma = ints[3];
- sm_ports[i].dma2 = (ints[0] >= 4) ? ints[4] : 0;
- sm_ports[i].seriobase = (ints[0] >= 5) ? ints[5] : 0;
- sm_ports[i].pariobase = (ints[0] >= 6) ? ints[6] : 0;
- sm_ports[i].midiiobase = (ints[0] >= 7) ? ints[7] : 0;
- if (i < NR_PORTS-1)
- sm_ports[i+1].mode = NULL;
-}
-
-#endif /* MODULE */
-/* --------------------------------------------------------------------- */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov