patch-2.1.6 linux/drivers/sound/lowlevel/awe_hw.h

• Lines: 90
• Date: Fri Oct 25 13:06:35 1996
• Orig file: v2.1.5/linux/drivers/sound/lowlevel/awe_hw.h
• Orig date: Thu Jan 1 02:00:00 1970

diff -u --recursive --new-file v2.1.5/linux/drivers/sound/lowlevel/awe_hw.h linux/drivers/sound/lowlevel/awe_hw.h
@@ -0,0 +1,89 @@
+/*================================================================
+ * AWE32 access routines
+ *================================================================*/
+
+#ifndef AWE_HW_H_DEF
+#define AWE_HW_H_DEF
+
+/*
+ * user configuration:
+ * if auto detection can't work properly, define the following values
+ * for your machine.
+ */
+/*#define AWE_DEFAULT_BASE_ADDR	0x620*/	/* base port address */
+/*#define AWE_DEFAULT_MEM_SIZE	512*/	/* kbytes */
+
+
+/*
+ * maximum size of sample table:
+ * if your data overflow, increase the following values.
+ */
+#define AWE_MAX_SAMPLES		400
+#define AWE_MAX_INFOS		900	/* GS presets has 801 infos! */
+
+
+/*
+ * Emu-8000 control registers
+ * name(channel)	reg, port
+ */
+
+#define awe_cmd_idx(reg,ch)	(((reg)<< 5) | (ch))
+
+#define Data0    0x620	/* doubleword r/w */
+#define Data1    0xA20	/* doubleword r/w */
+#define Data2    0xA22	/* word r/w */
+#define Data3    0xE20	/* word r/w */
+#define Pointer  0xE22	/* register pointer r/w */
+
+#define AWE_CPF(ch)	awe_cmd_idx(0,ch), Data0	/* DW: current pitch and fractional address */
+#define AWE_PTRX(ch)	awe_cmd_idx(1,ch), Data0	/* DW: pitch target and reverb send */
+#define AWE_CVCF(ch)	awe_cmd_idx(2,ch), Data0	/* DW: current volume and filter cutoff */
+#define AWE_VTFT(ch)	awe_cmd_idx(3,ch), Data0	/* DW: volume and filter cutoff targets */
+#define AWE_PSST(ch)	awe_cmd_idx(6,ch), Data0	/* DW: pan send and loop start address */
+#define AWE_CSL(ch)	awe_cmd_idx(7,ch), Data0	/* DW: chorus send and loop end address */
+#define AWE_CCCA(ch)	awe_cmd_idx(0,ch), Data1	/* DW: Q, control bits, and current address */
+#define AWE_HWCF4	awe_cmd_idx(1,9),  Data1	/* DW: config dw 4 */
+#define AWE_HWCF5	awe_cmd_idx(1,10), Data1	/* DW: config dw 5 */
+#define AWE_HWCF6	awe_cmd_idx(1,13), Data1	/* DW: config dw 6 */
+#define AWE_SMALR	awe_cmd_idx(1,20), Data1	/* DW: sound memory address for left read */
+#define AWE_SMARR	awe_cmd_idx(1,21), Data1	/* DW:    for right read */
+#define AWE_SMALW	awe_cmd_idx(1,22), Data1	/* DW: sound memory address for left write */
+#define AWE_SMARW	awe_cmd_idx(1,23), Data1	/* DW:    for right write */
+#define AWE_SMLD	awe_cmd_idx(1,26), Data1	/* W: sound memory left data */
+#define AWE_SMRD	awe_cmd_idx(1,26), Data2	/* W:    right data */
+#define AWE_WC		awe_cmd_idx(1,27), Data2	/* W: sample counter */
+#define AWE_WC_Cmd	awe_cmd_idx(1,27)
+#define AWE_WC_Port	Data2
+#define AWE_HWCF1	awe_cmd_idx(1,29), Data1	/* W: config w 1 */
+#define AWE_HWCF2	awe_cmd_idx(1,30), Data1	/* W: config w 2 */
+#define AWE_HWCF3	awe_cmd_idx(1,31), Data1	/* W: config w 3 */
+#define AWE_INIT1(ch)	awe_cmd_idx(2,ch), Data1	/* W: init array 1 */
+#define AWE_INIT2(ch)	awe_cmd_idx(2,ch), Data2	/* W: init array 2 */
+#define AWE_INIT3(ch)	awe_cmd_idx(3,ch), Data1	/* W: init array 3 */
+#define AWE_INIT4(ch)	awe_cmd_idx(3,ch), Data2	/* W: init array 4 */
+#define AWE_ENVVOL(ch)	awe_cmd_idx(4,ch), Data1	/* W: volume envelope delay */
+#define AWE_DCYSUSV(ch)	awe_cmd_idx(5,ch), Data1	/* W: volume envelope sustain and decay */
+#define AWE_ENVVAL(ch)	awe_cmd_idx(6,ch), Data1	/* W: modulation envelope delay */
+#define AWE_DCYSUS(ch)	awe_cmd_idx(7,ch), Data1	/* W: modulation envelope sustain and decay */
+#define AWE_ATKHLDV(ch)	awe_cmd_idx(4,ch), Data2	/* W: volume envelope attack and hold */
+#define AWE_LFO1VAL(ch)	awe_cmd_idx(5,ch), Data2	/* W: LFO#1 Delay */
+#define AWE_ATKHLD(ch)	awe_cmd_idx(6,ch), Data2	/* W: modulation envelope attack and hold */
+#define AWE_LFO2VAL(ch)	awe_cmd_idx(7,ch), Data2	/* W: LFO#2 Delay */
+#define AWE_IP(ch)	awe_cmd_idx(0,ch), Data3	/* W: initial pitch */
+#define AWE_IFATN(ch)	awe_cmd_idx(1,ch), Data3	/* W: initial filter cutoff and attenuation */
+#define AWE_PEFE(ch)	awe_cmd_idx(2,ch), Data3	/* W: pitch and filter envelope heights */
+#define AWE_FMMOD(ch)	awe_cmd_idx(3,ch), Data3	/* W: vibrato and filter modulation freq */
+#define AWE_TREMFRQ(ch)	awe_cmd_idx(4,ch), Data3	/* W: LFO#1 tremolo amount and freq */
+#define AWE_FM2FRQ2(ch)	awe_cmd_idx(5,ch), Data3	/* W: LFO#2 vibrato amount and freq */
+
+/*  used during detection (returns ROM version ?)                    */
+#define AWE_U1		0xE0, Data3	  /* (R)(W) used in initialization */
+#define AWE_U2(ch)	0xC0+(ch), Data3  /* (W)(W) used in init envelope  */
+
+
+#define AWE_MAX_VOICES		32
+#define AWE_NORMAL_VOICES	30	/*30&31 are reserved for DRAM refresh*/
+
+#define AWE_DRAM_OFFSET		0x200000
+
+#endif