patch-2.1.51 linux/arch/ppc/coffboot/zlib.h

Next file: linux/arch/ppc/config.in
Previous file: linux/arch/ppc/coffboot/zlib.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.50/linux/arch/ppc/coffboot/zlib.h linux/arch/ppc/coffboot/zlib.h
@@ -0,0 +1,432 @@
+/*	$Id: zlib.h,v 1.1 1997/07/31 07:16:15 paulus Exp $	*/
+
+/*
+ * This file is derived from zlib.h and zconf.h from the zlib-0.95
+ * distribution by Jean-loup Gailly and Mark Adler, with some additions
+ * by Paul Mackerras to aid in implementing Deflate compression and
+ * decompression for PPP packets.
+ */
+
+/*
+ *  ==FILEVERSION 960122==
+ *
+ * This marker is used by the Linux installation script to determine
+ * whether an up-to-date version of this file is already installed.
+ */
+
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 0.95, Aug 16th, 1995.
+
+  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
+ */
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+/* #include "zconf.h" */	/* included directly here */
+
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
+
+/*
+     The library does not install any signal handler. It is recommended to
+  add at least a handler for SIGSEGV when decompressing; the library checks
+  the consistency of the input data whenever possible but may go nuts
+  for some forms of corrupted input.
+ */
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
+ * at addresses which are not a multiple of their size.
+ * Under DOS, -DFAR=far or -DFAR=__far may be needed.
+ */
+
+#ifndef STDC
+#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
+#    define STDC
+#  endif
+#endif
+
+#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
+#  include <unix.h>
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            1 << (windowBits+2)   +  1 << (memLevel+9)
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+typedef unsigned char  Byte;  /* 8 bits */
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+typedef Byte FAR Bytef;
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void FAR *voidpf;
+   typedef void     *voidp;
+#else
+   typedef Byte FAR *voidpf;
+   typedef Byte     *voidp;
+#endif
+
+/* end of original zconf.h */
+
+#define ZLIB_VERSION "0.95P"
+
+/* 
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms may be added later and will have the same
+  stream interface.
+
+     For compression the application must provide the output buffer and
+  may optionally provide the input buffer for optimization. For decompression,
+  the application must provide the input buffer and may optionally provide
+  the output buffer for optimization.
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    Bytef    *next_in;  /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidp      opaque;  /* private data object passed to zalloc and zfree */
+
+    Byte     data_type; /* best guess about the data type: ascii or binary */
+
+} z_stream;
+
+/*
+   The application must update next_in and avail_in when avail_in has
+   dropped to zero. It must update next_out and avail_out when avail_out
+   has dropped to zero. The application must initialize zalloc, zfree and
+   opaque before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application.
+
+   The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   opaque value.
+
+   zalloc must return Z_NULL if there is not enough memory for the object.
+   On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by zalloc for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+   The fields total_in and total_out can be used for statistics or
+   progress reports. After compression, total_in holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+#define Z_FULL_FLUSH    2
+#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
+#define Z_FINISH        4
+#define Z_PACKET_FLUSH	5
+/* See deflate() below for the usage of these constants */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+/* error codes for the compression/decompression functions */
+
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_DEFAULT_STRATEGY    0
+
+#define Z_BINARY   0
+#define Z_ASCII    1
+#define Z_UNKNOWN  2
+/* Used to set the data_type field */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+extern char *zlib_version;
+/* The application can compare zlib_version and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+ */
+
+                        /* basic functions */
+
+extern int inflateInit OF((z_stream *strm));
+/* 
+     Initializes the internal stream state for decompression. The fields
+   zalloc and zfree must be initialized before by the caller.  If zalloc and
+   zfree are set to Z_NULL, inflateInit updates them to use default allocation
+   functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory.  msg is set to null if there is no error message.
+   inflateInit does not perform any decompression: this will be done by
+   inflate().
+*/
+
+
+extern int inflate OF((z_stream *strm, int flush));
+/*
+  Performs one or both of the following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing
+    will resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() always provides as much output as possible
+    (until there is no more input data or no more space in the output buffer).
+
+  Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (avail_out == 0), or after each
+  call of inflate().
+
+    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
+  inflate flushes as much output as possible to the output buffer. The
+  flushing behavior of inflate is not specified for values of the flush
+  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
+  current implementation actually flushes as much output as possible
+  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
+  has been consumed, it is expecting to see the length field of a stored
+  block; if not, it returns Z_DATA_ERROR.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of inflate), the parameter flush should be set to
+  Z_FINISH. In this case all pending input is processed and all pending
+  output is flushed; avail_out must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+  is never required, but can be used to inform inflate that a faster routine
+  may be used for the single inflate() call.
+
+    inflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if the end of the
+  compressed data has been reached and all uncompressed output has been
+  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
+  the stream structure was inconsistent (for example if next_in or next_out
+  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
+  progress is possible or if there was not enough room in the output buffer
+  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
+  call inflateSync to look for a good compression block.  */
+
+
+extern int inflateEnd OF((z_stream *strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent. In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+                        /* advanced functions */
+
+extern int inflateInit2 OF((z_stream *strm,
+                            int  windowBits));
+/*   
+     This is another version of inflateInit with more compression options. The
+   fields next_out, zalloc and zfree must be initialized before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library (the value 16 will be allowed soon). The
+   default value is 15 if inflateInit is used instead. If a compressed stream
+   with a larger window size is given as input, inflate() will return with
+   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     If next_out is not null, the library will use this buffer for the history
+   buffer; the buffer must either be large enough to hold the entire output
+   data, or have at least 1<<windowBits bytes.  If next_out is null, the
+   library will allocate its own buffer (and leave next_out null). next_in
+   need not be provided here but must be provided by the application for the
+   next call of inflate().
+
+     If the history buffer is provided by the application, next_out must
+   never be changed by the application since the decompressor maintains
+   history information inside this buffer from call to call; the application
+   can only reset next_out to the beginning of the history buffer when
+   avail_out is zero and all output has been consumed.
+
+      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
+   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
+   windowBits < 8). msg is set to null if there is no error message.
+   inflateInit2 does not perform any decompression: this will be done by
+   inflate().
+*/
+
+extern int inflateSync OF((z_stream *strm));
+/* 
+    Skips invalid compressed data until the special marker (see deflate()
+  above) can be found, or until all available input is skipped. No output
+  is provided.
+
+    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no marker has been found,
+  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of total_in which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call inflateSync, providing more input each time,
+  until success or end of the input data.
+*/
+
+extern int inflateReset OF((z_stream *strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.
+   The stream will keep attributes that may have been set by inflateInit2.
+
+      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+extern int inflateIncomp OF((z_stream *strm));
+/*
+     This function adds the data at next_in (avail_in bytes) to the output
+   history without performing any output.  There must be no pending output,
+   and the decompressor must be expecting to see the start of a block.
+   Calling this function is equivalent to decompressing a stored block
+   containing the data at next_in (except that the data is not output).
+*/
+
+                        /* checksum functions */
+
+/*
+     This function is not related to compression but is exported
+   anyway because it might be useful in applications using the
+   compression library.
+*/
+
+extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
+
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+#ifndef _Z_UTIL_H
+    struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+#endif /* _ZLIB_H */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov