patch-2.1.44 linux/include/asm-mips/ioctls.h

Next file: linux/include/asm-mips/ipc.h
Previous file: linux/include/asm-mips/ioctl.h
Back to the patch index
Back to the overall index
Lines: 279
Date: Thu Jun 26 12:33:39 1997
Orig file: v2.1.43/linux/include/asm-mips/ioctls.h
Orig date: Wed May 8 00:32:41 1996

diff -u --recursive --new-file v2.1.43/linux/include/asm-mips/ioctls.h linux/include/asm-mips/ioctls.h
@@ -1,8 +1,21 @@
+/*
+ * ioctls for Linux/MIPS.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996 by Ralf Baechle
+ */
 #ifndef __ASM_MIPS_IOCTLS_H
 #define __ASM_MIPS_IOCTLS_H
 
 #include <asm/ioctl.h>
 
+#if defined(__USE_MISC) || defined (__KERNEL__)
+#define tIOC		('t' << 8)
+#endif
+
 #define TCGETA		0x5401
 #define TCSETA		0x5402
 #define TCSETAW		0x5403
@@ -39,15 +52,18 @@
 #define TIOCSWINSZ	_IOW('t', 103, struct winsize)	/* set window size */
 #define TIOCGWINSZ	_IOR('t', 104, struct winsize)	/* get window size */
 #define TIOCNOTTY	0x5471		/* void tty association */
-#define TIOCSETD	0x7401
-#define TIOCGETD	0x7400
+#define TIOCSETD	(tIOC | 1)
+#define TIOCGETD	(tIOC | 0)
 
 #define FIOCLEX		0x6601
 #define FIONCLEX	0x6602		/* these numbers need to be adjusted. */
 #define FIOASYNC	0x667d
 #define FIONBIO		0x667e
 
-						/* 116-117 compat */
+#if defined(__USE_MISC) || defined (__KERNEL__)
+#define TIOCGLTC	(tIOC | 116)		/* get special local chars */
+#define TIOCSLTC	(tIOC | 117)		/* set special local chars */
+#endif
 #define TIOCSPGRP	_IOW('t', 118, int)	/* set pgrp of tty */
 #define TIOCGPGRP	_IOR('t', 119, int)	/* get pgrp of tty */
 #define TIOCCONS	_IOW('t', 120, int)	/* become virtual console */
@@ -55,6 +71,12 @@
 #define FIONREAD	0x467f
 #define TIOCINQ		FIONREAD
 
+#if defined(__USE_MISC) || defined (__KERNEL__)
+#define TIOCGETP        (tIOC | 8)
+#define TIOCSETP        (tIOC | 9)
+#define TIOCSETN        (tIOC | 10)		/* TIOCSETP wo flush */
+#endif
+ 
 #if 0
 #define	TIOCSETA	_IOW('t', 20, struct termios) /* set termios struct */
 #define	TIOCSETAW	_IOW('t', 21, struct termios) /* drain output, set */
@@ -84,217 +106,9 @@
 #define TIOCSERGETLSR   0x548e /* Get line status register */
 #define TIOCSERGETMULTI 0x548f /* Get multiport config  */
 #define TIOCSERSETMULTI 0x5490 /* Set multiport config */
-
-/* ----------------------------------------------------------------------- */
-
-/* c_cc characters */
-#define VINTR		 0		/* Interrupt character [ISIG].  */
-#define VQUIT		 1		/* Quit character [ISIG].  */
-#define VERASE		 2		/* Erase character [ICANON].  */
-#define VKILL		 3		/* Kill-line character [ICANON].  */
-#define VEOF		 4		/* End-of-file character [ICANON].  */
-#define VMIN		VEOF		/* Minimum number of bytes read at once [!ICANON].  */
-#define VEOL		 5		/* End-of-line character [ICANON].  */
-#define VTIME		VEOL		/* Time-out value (tenths of a second) [!ICANON].  */
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define VEOL2		 6		/* Second EOL character [ICANON].  */
-/* The next two are guesses ... */
-#define VSWTC		 7		/* ??? */
-#endif
-#define VSWTCH		VSWTC
-#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF].  */
-#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF].  */
-#define VSUSP		10		/* Suspend character [ISIG].  */
-#if 0
-/*
- * VDSUSP is not supported
- */
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define VDSUSP		11		/* Delayed suspend character [ISIG].  */
-#endif
-#endif
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define VREPRINT	12		/* Reprint-line character [ICANON].  */
-#endif
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define VDISCARD	13		/* Discard character [IEXTEN].  */
-#define VWERASE		14		/* Word-erase character [ICANON].  */
-#define VLNEXT		15		/* Literal-next character [IEXTEN].  */
-#endif
-/*
- * 17 - 19 are reserved
- */
-
-#ifdef __KERNEL__
-/*
- *	intr=^C		quit=^|		erase=del	kill=^U
- *	eof=^D		eol=time=\0	eol2=\0		swtc=\0
- *	start=^Q	stop=^S		susp=^Z		vdsusp=
- *	reprint=^R	discard=^U	werase=^W	lnext=^V
- */
-#define INIT_C_CC "\003\034\177\025\004\0\0\0\021\023\032\0\022\017\027\026"
-#endif
-
-/* c_iflag bits */
-#define IGNBRK	0000001		/* Ignore break condition.  */
-#define BRKINT	0000002		/* Signal interrupt on break.  */
-#define IGNPAR	0000004		/* Ignore characters with parity errors.  */
-#define PARMRK	0000010		/* Mark parity and framing errors.  */
-#define INPCK	0000020		/* Enable input parity check.  */
-#define ISTRIP	0000040		/* Strip 8th bit off characters.  */
-#define INLCR	0000100		/* Map NL to CR on input.  */
-#define IGNCR	0000200		/* Ignore CR.  */
-#define ICRNL	0000400		/* Map CR to NL on input.  */
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define IUCLC	0001000		/* Map upper case to lower case on input.  */
-#endif
-#define IXON	0002000		/* Enable start/stop output control.  */
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define IXANY	0004000		/* Any character will restart after stop.  */
-#endif
-#define IXOFF	0010000		/* Enable start/stop input control.  */
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define IMAXBEL	0020000		/* Ring bell when input queue is full.  */
-#endif
-
-/* c_oflag bits */
-#define OPOST	0000001		/* Perform output processing.  */
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define OLCUC	0000002		/* Map lower case to upper case on output.  */
-#define ONLCR	0000004		/* Map NL to CR-NL on output.  */
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-/*
-#define PAGEOUT ???
-#define WRAP    ???
- */
-#endif
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060		/* Number of bits per byte (mask).  */
-#define   CS5	0000000		/* 5 bits per byte.  */
-#define   CS6	0000020		/* 6 bits per byte.  */
-#define   CS7	0000040		/* 7 bits per byte.  */
-#define   CS8	0000060		/* 8 bits per byte.  */
-#define CSTOPB	0000100		/* Two stop bits instead of one.  */
-#define CREAD	0000200		/* Enable receiver.  */
-#define PARENB	0000400		/* Parity enable.  */
-#define PARODD	0001000		/* Odd parity instead of even.  */
-#define HUPCL	0002000		/* Hang up on last close.  */
-#define CLOCAL	0004000		/* Ignore modem status lines.  */
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define CBAUDEX 0010000
-#define  B57600  0010001
-#define  B115200 0010002
-#define  B230400 0010003
-#define  B460800 0010004
-#define CIBAUD	  002003600000	/* input baud rate (not used) */
-#define CRTSCTS	  020000000000		/* flow control */
-#endif
-
-/* c_lflag bits */
-#define ISIG	0000001		/* Enable signals.  */
-#define ICANON	0000002		/* Do erase and kill processing.  */
-#define XCASE	0000004
-#define ECHO	0000010		/* Enable echo.  */
-#define ECHOE	0000020		/* Visual erase for ERASE.  */
-#define ECHOK	0000040		/* Echo NL after KILL.  */
-#define ECHONL	0000100		/* Echo NL even if ECHO is off.  */
-#define NOFLSH	0000200		/* Disable flush after interrupt.  */
-#define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define ECHOCTL	0001000		/* Echo control characters as ^X.  */
-#define ECHOPRT	0002000		/* Hardcopy visual erase.  */
-#define ECHOKE	0004000		/* Visual erase for KILL.  */
-#endif
-#define FLUSHO	0020000
-#if defined (__USE_BSD) || defined (__KERNEL__)
-#define PENDIN	0040000		/* Retype pending input (state).  */
-#endif
-#define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
-#define ITOSTOP	TOSTOP
-
-/* modem lines */
-#define TIOCM_LE	0x001		/* line enable */
-#define TIOCM_DTR	0x002		/* data terminal ready */
-#define TIOCM_RTS	0x004		/* request to send */
-#define TIOCM_ST	0x010		/* secondary transmit */
-#define TIOCM_SR	0x020		/* secondary receive */
-#define TIOCM_CTS	0x040		/* clear to send */
-#define TIOCM_CAR	0x100		/* carrier detect */
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RNG	0x200		/* ring */
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_DSR	0x400		/* data set ready */
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0	/* Suspend output.  */
-#define	TCOON		1	/* Restart suspended output.  */
-#define	TCIOFF		2	/* Send a STOP character.  */
-#define	TCION		3	/* Send a START character.  */
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0	/* Discard data received but not yet read.  */
-#define	TCOFLUSH	1	/* Discard data written but not yet sent.  */
-#define	TCIOFLUSH	2	/* Discard all pending data.  */
-
-/* tcsetattr uses these */
-#define	TCSANOW		TCSETS	/* Change immediately.  */
-#define	TCSADRAIN	TCSETSW	/* Change when pending output is written.  */
-#define	TCSAFLUSH	TCSETSF	/* Flush pending input before changing.  */
-
-/* line disciplines */
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
+#define TIOCMIWAIT      0x5491 /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x5492 /* read serial port inline interrupt counts */
+#define TIOCSBRK	0x5491 /* BSD compatibility */ 
+#define TIOCCBRK	0x5492 /* BSD compatibility */
 
 #endif /* __ASM_MIPS_IOCTLS_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov