patch-2.1.44 linux/arch/mips/sni/setup.c

Next file: linux/arch/mips/tools/Makefile
Previous file: linux/arch/mips/sni/reset.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.43/linux/arch/mips/sni/setup.c linux/arch/mips/sni/setup.c
@@ -0,0 +1,158 @@
+/*
+ * Setup pointers to hardware dependand routines.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997 by Ralf Baechle
+ */
+#include <asm/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/pci.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/sni.h>
+#include <asm/vector.h>
+#include <asm/pci.h>
+
+/*
+ * Initial irq handlers.
+ */
+static void no_action(int cpl, void *dev_id, struct pt_regs *regs) { }
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2  = { no_action, 0, 0, "cascade", NULL, NULL};
+
+extern asmlinkage void sni_rm200_pci_handle_int(void);
+extern asmlinkage void sni_fd_cacheflush(const void *addr, size_t size);
+extern struct feature sni_rm200_pci_feature;
+
+extern void sni_machine_restart(char *command);
+extern void sni_machine_halt(void);
+extern void sni_machine_power_off(void);
+
+__initfunc(static void sni_irq_setup(void))
+{
+	set_except_vector(0, sni_rm200_pci_handle_int);
+	request_region(0x20,0x20, "pic1");
+	request_region(0xa0,0x20, "pic2");	
+	setup_x86_irq(2, &irq2);
+	/*
+	 * IRQ0 seems to be the irq for PC style stuff.
+	 * I don't know how to handle the debug button interrupt, so
+	 * don't use this button yet or bad things happen ...
+	 */
+	set_cp0_status(ST0_IM, IE_IRQ0);
+}
+
+void (*board_time_init)(struct irqaction *irq);
+
+__initfunc(static void sni_rm200_pci_time_init(struct irqaction *irq))
+{
+	/* set the clock to 100 Hz */
+	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
+	outb_p(LATCH & 0xff , 0x40);	/* LSB */
+	outb(LATCH >> 8 , 0x40);	/* MSB */
+	setup_x86_irq(0, irq);
+}
+
+unsigned char aux_device_present;
+extern unsigned long sni_rm200_pcibios_init (unsigned long memory_start,
+                                             unsigned long memory_end);
+extern unsigned char sni_map_isa_cache;
+
+/*
+ * A bit more gossip about the iron we're running on ...
+ */
+static inline void sni_pcimt_detect(void)
+{
+	char boardtype[80];
+	unsigned char csmsr;
+	char *p = boardtype;
+	int asic;
+
+	csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
+
+	p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
+	if ((csmsr & 0x80) == 0)
+		p += sprintf(p, ", board revision %s",
+		             (csmsr & 0x20) ? "D" : "C");
+	asic = csmsr & 0x80;
+	asic = (csmsr & 0x08) ? asic : !asic;
+	p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
+	printk("%s.\n", boardtype);
+}
+	
+__initfunc(void sni_rm200_pci_setup(void))
+{
+	tag *atag;
+
+	/*
+	 * We just check if a tag_screen_info can be gathered
+	 * in setup_arch(), if yes we don't proceed futher...
+	 */
+	atag = bi_TagFind(tag_screen_info);
+	if (!atag) {
+		/*
+		 * If no, we try to find the tag_arc_displayinfo which is
+		 * always created by Milo for an ARC box (for now Milo only
+		 * works on ARC boxes :) -Stoned.
+		 */
+		atag = bi_TagFind(tag_arcdisplayinfo);
+		if (atag) {
+			screen_info.orig_x = 
+				((mips_arc_DisplayInfo*)TAGVALPTR(atag))->cursor_x;
+			screen_info.orig_y = 
+				((mips_arc_DisplayInfo*)TAGVALPTR(atag))->cursor_y;
+			screen_info.orig_video_cols  = 
+				((mips_arc_DisplayInfo*)TAGVALPTR(atag))->columns;
+			screen_info.orig_video_lines  = 
+				((mips_arc_DisplayInfo*)TAGVALPTR(atag))->lines;
+		}
+	}
+
+	sni_pcimt_detect();
+
+	irq_setup = sni_irq_setup;
+	fd_cacheflush = sni_fd_cacheflush;	// Will go away
+	feature = &sni_rm200_pci_feature;
+	port_base = SNI_PORT_BASE;
+
+	/*
+	 * Setup (E)ISA I/O memory access stuff
+	 */
+	isa_slot_offset = 0xb0000000;
+	// sni_map_isa_cache = 0;
+	EISA_bus = 1;
+
+	request_region(0x00,0x20,"dma1");
+	request_region(0x40,0x20,"timer");
+	/* XXX FIXME: CONFIG_RTC */
+	request_region(0x70,0x10,"rtc");
+	request_region(0x80,0x10,"dma page reg");
+	request_region(0xc0,0x20,"dma2");
+	board_time_init = sni_rm200_pci_time_init;
+
+	_machine_restart = sni_machine_restart;
+	_machine_halt = sni_machine_halt;
+	_machine_power_off = sni_machine_power_off;
+
+	aux_device_present = 0xaa;
+
+	/*
+	 * Some cluefull person has placed the PCI config data directly in
+	 * the I/O port space ...
+	 */
+	request_region(0xcfc,0x04,"PCI config data");
+	_pcibios_init = sni_rm200_pcibios_init;
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov