patch-2.1.32 linux/drivers/scsi/seagate.h

• Lines: 105
• Date: Fri Apr 4 14:03:30 1997
• Orig file: v2.1.31/linux/drivers/scsi/seagate.h
• Orig date: Fri Jan 24 09:35:51 1997

diff -u --recursive --new-file v2.1.31/linux/drivers/scsi/seagate.h linux/drivers/scsi/seagate.h
@@ -35,102 +35,6 @@
 			 seagate_st0x_queue_command, seagate_st0x_abort, \
 			 seagate_st0x_reset, NULL, seagate_st0x_biosparam, \
 			 1, 7, SG_ALL, 1, 0, 0, DISABLE_CLUSTERING}
-#endif
-
-/*
-	Thanks to Brian Antoine for the example code in his Messy-Loss ST-01
-		driver, and Mitsugu Suzuki for information on the ST-01
-		SCSI host.
-*/
-
-/*
-	CONTROL defines
-*/
-
-#define CMD_RST 		0x01
-#define CMD_SEL 		0x02
-#define CMD_BSY 		0x04
-#define CMD_ATTN    		0x08
-#define CMD_START_ARB		0x10
-#define CMD_EN_PARITY		0x20
-#define CMD_INTR		0x40
-#define CMD_DRVR_ENABLE		0x80
-
-/*
-	STATUS
-*/
-#ifdef SWAPSTAT
-	#define STAT_MSG		0x08
-	#define STAT_CD			0x02
-#else
-	#define STAT_MSG		0x02
-	#define STAT_CD			0x08
-#endif
-
-#define STAT_BSY		0x01
-#define STAT_IO			0x04
-#define STAT_REQ		0x10
-#define STAT_SEL		0x20
-#define STAT_PARITY		0x40
-#define STAT_ARB_CMPL		0x80
-
-/* 
-	REQUESTS
-*/
-
-#define REQ_MASK (STAT_CD |  STAT_IO | STAT_MSG)
-#define REQ_DATAOUT 0
-#define REQ_DATAIN STAT_IO
-#define REQ_CMDOUT STAT_CD
-#define REQ_STATIN (STAT_CD | STAT_IO)
-#define REQ_MSGOUT (STAT_MSG | STAT_CD)
-#define REQ_MSGIN (STAT_MSG | STAT_CD | STAT_IO)
-
-extern volatile int seagate_st0x_timeout;
-
-#ifdef PARITY
-	#define BASE_CMD CMD_EN_PARITY
-#else
-	#define BASE_CMD  0
-#endif
-
-/*
-	Debugging code
-*/
-
-#define PHASE_BUS_FREE 1
-#define PHASE_ARBITRATION 2
-#define PHASE_SELECTION 4
-#define PHASE_DATAIN 8 
-#define PHASE_DATAOUT 0x10
-#define PHASE_CMDOUT 0x20
-#define PHASE_MSGIN 0x40
-#define PHASE_MSGOUT 0x80
-#define PHASE_STATUSIN 0x100
-#define PHASE_ETC (PHASE_DATAIN | PHASE_DATA_OUT | PHASE_CMDOUT | PHASE_MSGIN | PHASE_MSGOUT | PHASE_STATUSIN)
-#define PRINT_COMMAND 0x200
-#define PHASE_EXIT 0x400
-#define PHASE_RESELECT 0x800
-#define DEBUG_FAST 0x1000
-#define DEBUG_SG   0x2000
-#define DEBUG_LINKED	0x4000
-#define DEBUG_BORKEN	0x8000
-
-/* 
- *	Control options - these are timeouts specified in .01 seconds.
- */
-
-/* 30, 20 work */
-#define ST0X_BUS_FREE_DELAY 25
-#define ST0X_SELECTION_DELAY 25
-
-#define eoi() __asm__("push %%eax\nmovb $0x20, %%al\noutb %%al, $0x20\npop %%eax"::)
-	
-#define SEAGATE 1	/* these determine the type of the controller */
-#define FD	2
-
-#define ST0X_ID_STR	"Seagate ST-01/ST-02"
-#define FD_ID_STR	"TMC-8XX/TMC-950"
-
-#endif
+#endif /* ASM */
 
+#endif /* _SEAGATE_H */