patch-2.1.27 linux/drivers/scsi/u14-34f.c
Next file: linux/drivers/scsi/u14-34f.h
Previous file: linux/drivers/scsi/eata.h
Back to the patch index
Back to the overall index
- Lines: 697
- Date:
Wed Feb 26 10:56:28 1997
- Orig file:
v2.1.26/linux/drivers/scsi/u14-34f.c
- Orig date:
Tue Jan 14 02:48:50 1997
diff -u --recursive --new-file v2.1.26/linux/drivers/scsi/u14-34f.c linux/drivers/scsi/u14-34f.c
@@ -1,6 +1,21 @@
/*
* u14-34f.c - Low-level driver for UltraStor 14F/34F SCSI host adapters.
*
+ * 24 Feb 1997 rev. 3.00 for linux 2.0.29 and 2.1.26
+ * When loading as a module, parameter passing is now supported
+ * both in 2.0 and in 2.1 style.
+ * Fixed data transfer direction for some SCSI opcodes.
+ * Immediate acknowledge to request sense commands.
+ * Linked commands to each disk device are now reordered by elevator
+ * sorting. Rare cases in which reordering of write requests could
+ * cause wrong results are managed.
+ *
+ * 18 Jan 1997 rev. 2.60 for linux 2.1.21 and 2.0.28
+ * Added command line options to enable/disable linked commands
+ * (lc:[y|n]), old firmware support (of:[y|n]) and to set the max
+ * queue depth (mq:xx). Default is "u14-34f=lc:n,of:n,mq:8".
+ * Improved command linking.
+ *
* 8 Jan 1997 rev. 2.50 for linux 2.1.20 and 2.0.27
* Added linked command support.
*
@@ -9,7 +24,7 @@
*
* 22 Nov 1996 rev. 2.30 for linux 2.1.12 and 2.0.26
* The list of i/o ports to be probed can be overwritten by the
- * "u14-34f=port0, port1,...." boot command line option.
+ * "u14-34f=port0,port1,...." boot command line option.
* Scatter/gather lists are now allocated by a number of kmalloc
* calls, in order to avoid the previous size limit of 64Kb.
*
@@ -118,8 +133,8 @@
*
* Here a sample configuration using two U14F boards:
*
- U14F0: ISA 0x330, BIOS 0xc8000, IRQ 11, DMA 5, SG 32, MB 16, UC 1, LC 1, MQ 8.
- U14F1: ISA 0x340, BIOS 0x00000, IRQ 10, DMA 6, SG 32, MB 16, UC 1, LC 1, MQ 8.
+ U14F0: ISA 0x330, BIOS 0xc8000, IRQ 11, DMA 5, SG 32, MB 16, of:n, lc:y, mq:8.
+ U14F1: ISA 0x340, BIOS 0x00000, IRQ 10, DMA 6, SG 32, MB 16, of:n, lc:y, mq:8.
*
* The boot controller must have its BIOS enabled, while other boards can
* have their BIOS disabled, or enabled to an higher address.
@@ -167,21 +182,80 @@
* problems when using more then 16 scatter/gather lists.
*
* The list of i/o ports to be probed can be totally replaced by the
- * boot command line option: "u14-34f=port0, port1, port2,...", where the
+ * boot command line option: "u14-34f=port0,port1,port2,...", where the
* port0, port1... arguments are ISA/VESA addresses to be probed.
- * For example using "u14-34f=0x230, 0x340", the driver probes only the two
+ * For example using "u14-34f=0x230,0x340", the driver probes only the two
* addresses 0x230 and 0x340 in this order; "u14-34f=0" totally disables
* this driver.
*
+ * After the optional list of detection probes, other possible command line
+ * options are:
+ *
+ * lc:y enables linked commands;
+ * lc:n disables linked commands;
+ * of:y enables old firmware support;
+ * of:n disables old firmware support;
+ * mq:xx set the max queue depth to the value xx (2 <= xx <= 8).
+ *
+ * The default value is: "u14-34f=lc:n,of:n,mq:8". An example using the list
+ * of detection probes could be: "u14-34f=0x230,0x340,lc:y,of:n,mq:4".
+ *
+ * When loading as a module, parameters can be specified as well.
+ * The above example would be (use 1 in place of y and 0 in place of n):
+ *
+ * modprobe u14-34f io_port=0x230,0x340 linked_comm=1 have_old_firmware=0 \
+ * max_queue_depth=4
+ *
+ * ----------------------------------------------------------------------------
+ * In this implementation, linked commands are designed to work with any DISK
+ * or CD-ROM, since this linking has only the intent of clustering (time-wise)
+ * and reordering by elevator sorting commands directed to each device,
+ * without any relation with the actual SCSI protocol between the controller
+ * and the device.
+ * If Q is the queue depth reported at boot time for each device (also named
+ * cmds/lun) and Q > 2, whenever there is already an active command to the
+ * device all other commands to the same device (up to Q-1) are kept waiting
+ * in the elevator sorting queue. When the active command completes, the
+ * commands in this queue are sorted by sector address. The sort is chosen
+ * between increasing or decreasing by minimizing the seek distance between
+ * the sector of the commands just completed and the sector of the first
+ * command in the list to be sorted.
+ * Trivial math assures that if there are (Q-1) outstanding request for
+ * random seeks over S sectors, the unsorted average seek distance is S/2,
+ * while the sorted average seek distance is S/(Q-1). The seek distance is
+ * hence divided by a factor (Q-1)/2.
+ * The above pure geometric remarks are valid in all cases and the
+ * driver effectively reduces the seek distance by the predicted factor
+ * when there are Q concurrent read i/o operations on the device, but this
+ * does not necessarily results in a noticeable performance improvement:
+ * your mileage may vary....
+ *
+ * Note: command reordering inside a batch of queued commands could cause
+ * wrong results only if there is at least one write request and the
+ * intersection (sector-wise) of all requests is not empty.
+ * When the driver detects a batch including overlapping requests
+ * (a really rare event) strict serial (pid) order is enforced.
+ * ----------------------------------------------------------------------------
+ *
* The boards are named Ux4F0, Ux4F1,... according to the detection order.
*
* In order to support multiple ISA boards in a reliable way,
* the driver sets host->wish_block = TRUE for all ISA boards.
*/
+#define LinuxVersionCode(v, p, s) (((v)<<16)+((p)<<8)+(s))
+#define MAX_INT_PARAM 10
#if defined(MODULE)
#include <linux/module.h>
#include <linux/version.h>
+#if LINUX_VERSION_CODE >= LinuxVersionCode(2,1,26)
+MODULE_PARM(io_port, "1-" __MODULE_STRING(MAX_INT_PARAM) "i");
+MODULE_PARM(linked_comm, "i");
+MODULE_PARM(have_old_firmware, "i");
+MODULE_PARM(link_statistics, "i");
+MODULE_PARM(max_queue_depth, "i");
+MODULE_AUTHOR("Dario Ballabio");
+#endif
#endif
#include <linux/string.h>
@@ -247,8 +321,9 @@
#define MAX_SAFE_SGLIST 16
#define MAX_INTERNAL_RETRIES 64
#define MAX_CMD_PER_LUN 2
-#define MAX_TAGGED_CMD_PER_LUN 8
+#define MAX_TAGGED_CMD_PER_LUN (MAX_MAILBOXES - MAX_CMD_PER_LUN)
+#define SKIP UINT_MAX
#define FALSE 0
#define TRUE 1
#define FREE 0
@@ -282,6 +357,8 @@
#define ASST 0x91
#define ARRAY_SIZE(arr) (sizeof (arr) / sizeof (arr)[0])
+#define YESNO(a) ((a) ? 'y' : 'n')
+#define TLDEV(type) ((type) == TYPE_DISK || (type) == TYPE_ROM)
#define PACKED __attribute__((packed))
@@ -313,7 +390,6 @@
unsigned int sense_addr PACKED;
Scsi_Cmnd *SCpnt;
unsigned int index; /* cp index */
- unsigned int link_id; /* reference cp for linked commands */
struct sg_list *sglist;
};
@@ -343,12 +419,18 @@
static const char *driver_name = "Ux4F";
static unsigned int irqlist[MAX_IRQ], calls[MAX_IRQ];
-static unsigned int io_port[] = {
- 0x330, 0x340, 0x230, 0x240, 0x210, 0x130, 0x140,
+static unsigned int io_port[] = {
- /* End of list */
- 0x0
- };
+ /* Space for MAX_INT_PARAM ports usable while loading as a module */
+ SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
+ SKIP, SKIP,
+
+ /* Possible ISA/VESA ports */
+ 0x330, 0x340, 0x230, 0x240, 0x210, 0x130, 0x140,
+
+ /* End of list */
+ 0x0
+ };
#define HD(board) ((struct hostdata *) &sh[board]->hostdata)
#define BN(board) (HD(board)->board_name)
@@ -370,13 +452,21 @@
#define DEV2V(addr) ((addr) ? DEV2H(bus_to_virt((unsigned long)addr)) : 0)
static void u14_34f_interrupt_handler(int, void *, struct pt_regs *);
+static void flush_dev(Scsi_Device *, unsigned long, unsigned int, unsigned int);
static int do_trace = FALSE;
static int setup_done = FALSE;
+static int link_statistics = 0;
+
+#if defined (HAVE_OLD_UX4F_FIRMWARE)
+static int have_old_firmware = TRUE;
+#else
+static int have_old_firmware = FALSE;
+#endif
#if defined (CONFIG_SCSI_U14_34F_LINKED_COMMANDS)
-static int linked_commands = TRUE;
+static int linked_comm = TRUE;
#else
-static int linked_commands = FALSE;
+static int linked_comm = FALSE;
#endif
#if defined CONFIG_SCSI_U14_34F_MAX_TAGS
@@ -399,32 +489,45 @@
if (dev->host != host) continue;
- if (dev->tagged_supported) ntag++;
- else nuntag++;
+ if (TLDEV(dev->type) && (dev->tagged_supported || linked_comm))
+ ntag++;
+ else
+ nuntag++;
}
utqd = MAX_CMD_PER_LUN;
- tqd = (host->can_queue - utqd * nuntag) / (ntag + 1);
+ tqd = (host->can_queue - utqd * nuntag) / (ntag ? ntag : 1);
if (tqd > max_queue_depth) tqd = max_queue_depth;
if (tqd < MAX_CMD_PER_LUN) tqd = MAX_CMD_PER_LUN;
for(dev = devlist; dev; dev = dev->next) {
- char *tag_suffix = "";
+ char *tag_suffix = "", *link_suffix = "";
if (dev->host != host) continue;
- if (dev->tagged_supported) dev->queue_depth = tqd;
- else dev->queue_depth = utqd;
+ if (TLDEV(dev->type) && (dev->tagged_supported || linked_comm))
+ dev->queue_depth = tqd;
+ else
+ dev->queue_depth = utqd;
- if (dev->tagged_supported && dev->tagged_queue) tag_suffix = ", tagged";
- else if (dev->tagged_supported) tag_suffix = ", untagged";
+ if (TLDEV(dev->type)) {
+ if (linked_comm && dev->queue_depth > 2)
+ link_suffix = ", linked";
+ else
+ link_suffix = ", unlinked";
+ }
- printk("%s: scsi%d, channel %d, id %d, lun %d, cmds/lun %d%s.\n",
+ if (dev->tagged_supported && TLDEV(dev->type) && dev->tagged_queue)
+ tag_suffix = ", tagged";
+ else if (dev->tagged_supported && TLDEV(dev->type))
+ tag_suffix = ", untagged";
+
+ printk("%s: scsi%d, channel %d, id %d, lun %d, cmds/lun %d%s%s.\n",
BN(j), host->host_no, dev->channel, dev->id, dev->lun,
- dev->queue_depth, tag_suffix);
+ dev->queue_depth, link_suffix, tag_suffix);
}
restore_flags(flags);
@@ -606,32 +709,26 @@
HD(j)->board_number = j;
irqlist[irq]++;
- if (HD(j)->subversion == ESA) {
+ if (have_old_firmware) sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
-#if defined (HAVE_OLD_UX4F_FIRMWARE)
- sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
-#endif
-
- sh[j]->dma_channel = NO_DMA;
+ if (HD(j)->subversion == ESA) {
sh[j]->unchecked_isa_dma = FALSE;
+ sh[j]->dma_channel = NO_DMA;
sprintf(BN(j), "U34F%d", j);
bus_type = "VESA";
}
else {
sh[j]->wish_block = TRUE;
-
-#if defined (HAVE_OLD_UX4F_FIRMWARE)
- sh[j]->hostt->use_clustering = DISABLE_CLUSTERING;
- sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
-#endif
-
- sh[j]->dma_channel = dma_channel;
sh[j]->unchecked_isa_dma = TRUE;
- sprintf(BN(j), "U14F%d", j);
disable_dma(dma_channel);
clear_dma_ff(dma_channel);
set_dma_mode(dma_channel, DMA_MODE_CASCADE);
enable_dma(dma_channel);
+
+ if (have_old_firmware) sh[j]->hostt->use_clustering = DISABLE_CLUSTERING;
+
+ sh[j]->dma_channel = dma_channel;
+ sprintf(BN(j), "U14F%d", j);
bus_type = "ISA";
}
@@ -668,10 +765,10 @@
if (max_queue_depth < MAX_CMD_PER_LUN) max_queue_depth = MAX_CMD_PER_LUN;
- printk("%s: %s 0x%03x, BIOS 0x%05x, IRQ %u, %s, SG %d, MB %d, UC %d, "\
- "LC %d, MQ %d.\n", BN(j), bus_type, sh[j]->io_port, (int)sh[j]->base,
+ printk("%s: %s 0x%03x, BIOS 0x%05x, IRQ %u, %s, SG %d, MB %d, of:%c, "\
+ "lc:%c, mq:%d.\n", BN(j), bus_type, sh[j]->io_port, (int)sh[j]->base,
sh[j]->irq, dma_name, sh[j]->sg_tablesize, sh[j]->can_queue,
- sh[j]->hostt->use_clustering, linked_commands, max_queue_depth);
+ YESNO(have_old_firmware), YESNO(linked_comm), max_queue_depth);
if (sh[j]->max_id > 8 || sh[j]->max_lun > 8)
printk("%s: wide SCSI support enabled, max_id %u, max_lun %u.\n",
@@ -686,15 +783,33 @@
void u14_34f_setup(char *str, int *ints) {
int i, argc = ints[0];
+ char *cur = str, *pc;
- if (argc <= 0) return;
+ if (argc > 0) {
- if (argc > MAX_BOARDS) argc = MAX_BOARDS;
+ if (argc > MAX_INT_PARAM) argc = MAX_INT_PARAM;
- for (i = 0; i < argc; i++) io_port[i] = ints[i + 1];
+ for (i = 0; i < argc; i++) io_port[i] = ints[i + 1];
- io_port[i] = 0;
- setup_done = TRUE;
+ io_port[i] = 0;
+ setup_done = TRUE;
+ }
+
+ while (cur && (pc = strchr(cur, ':'))) {
+ int val = 0, c = *++pc;
+
+ if (c == 'n' || c == 'N') val = FALSE;
+ else if (c == 'y' || c == 'Y') val = TRUE;
+ else val = (int) simple_strtoul(pc, NULL, 0);
+
+ if (!strncmp(cur, "lc:", 3)) linked_comm = val;
+ else if (!strncmp(cur, "of:", 3)) have_old_firmware = val;
+ else if (!strncmp(cur, "mq:", 3)) max_queue_depth = val;
+ else if (!strncmp(cur, "ls:", 3)) link_statistics = val;
+
+ if ((cur = strchr(cur, ','))) ++cur;
+ }
+
return;
}
@@ -707,6 +822,14 @@
save_flags(flags);
cli();
+#if defined(MODULE)
+ /* io_port could have been modified when loading as a module */
+ if(io_port[0] != SKIP) {
+ setup_done = TRUE;
+ io_port[MAX_INT_PARAM] = 0;
+ }
+#endif
+
for (k = 0; k < MAX_IRQ; k++) {
irqlist[k] = 0;
calls[k] = 0;
@@ -714,8 +837,12 @@
for (k = 0; k < MAX_BOARDS + 1; k++) sh[k] = NULL;
- for (k = 0; io_port[k]; k++)
+ for (k = 0; io_port[k]; k++) {
+
+ if (io_port[k] == SKIP) continue;
+
if (j < MAX_BOARDS && port_detect(io_port[k], j, tpnt)) j++;
+ }
if (j > 0)
printk("UltraStor 14F/34F: Copyright (C) 1994-1997 Dario Ballabio.\n");
@@ -747,9 +874,15 @@
struct mscp *cpp;
static const unsigned char data_out_cmds[] = {
- 0x0a, 0x2a, 0x15, 0x55, 0x04, 0x07, 0x0b, 0x10, 0x16, 0x18, 0x1d,
- 0x24, 0x2b, 0x2e, 0x30, 0x31, 0x32, 0x38, 0x39, 0x3a, 0x3b, 0x3d,
- 0x3f, 0x40, 0x41, 0x4c, 0xaa, 0xae, 0xb0, 0xb1, 0xb2, 0xb6, 0xea
+ 0x0a, 0x2a, 0x15, 0x55, 0x04, 0x07, 0x18, 0x1d, 0x24, 0x2e,
+ 0x30, 0x31, 0x32, 0x38, 0x39, 0x3a, 0x3b, 0x3d, 0x3f, 0x40,
+ 0x41, 0x4c, 0xaa, 0xae, 0xb0, 0xb1, 0xb2, 0xb6, 0xea, 0x1b
+ };
+
+ static const unsigned char data_none_cmds[] = {
+ 0x01, 0x0b, 0x10, 0x11, 0x13, 0x16, 0x17, 0x19, 0x2b, 0x1e,
+ 0x2c, 0xac, 0x2f, 0xaf, 0x33, 0xb3, 0x35, 0x36, 0x45, 0x47,
+ 0x48, 0x49, 0xa9, 0x4b, 0xa5, 0xa6, 0xb5
};
save_flags(flags);
@@ -759,6 +892,16 @@
if (!done) panic("%s: qcomm, pid %ld, null done.\n", BN(j), SCpnt->pid);
+ if (SCpnt->cmnd[0] == REQUEST_SENSE && SCpnt->sense_buffer[0]) {
+ SCpnt->result = DID_OK << 16;
+ SCpnt->host_scribble = NULL;
+ printk("%s: qcomm, target %d.%d:%d, pid %ld, request sense ignored.\n",
+ BN(j), SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->pid);
+ restore_flags(flags);
+ done(SCpnt);
+ return 0;
+ }
+
/* i is the mailbox number, look for the first free mailbox
starting from last_cp_used */
i = HD(j)->last_cp_used + 1;
@@ -805,10 +948,17 @@
cpp->xdir = DTD_IN;
for (k = 0; k < ARRAY_SIZE(data_out_cmds); k++)
- if (SCpnt->cmnd[0] == data_out_cmds[k]) {
- cpp->xdir = DTD_OUT;
- break;
- }
+ if (SCpnt->cmnd[0] == data_out_cmds[k]) {
+ cpp->xdir = DTD_OUT;
+ break;
+ }
+
+ if (cpp->xdir == DTD_IN)
+ for (k = 0; k < ARRAY_SIZE(data_none_cmds); k++)
+ if (SCpnt->cmnd[0] == data_none_cmds[k]) {
+ cpp->xdir = DTD_NONE;
+ break;
+ }
cpp->opcode = OP_SCSI;
cpp->channel = SCpnt->channel;
@@ -830,27 +980,13 @@
cpp->scsi_cdbs_len = SCpnt->cmd_len;
memcpy(cpp->scsi_cdbs, SCpnt->cmnd, cpp->scsi_cdbs_len);
- if (linked_commands && SCpnt->device->tagged_supported
- && !HD(j)->target_to[SCpnt->target][SCpnt->channel]
- && !HD(j)->target_redo[SCpnt->target][SCpnt->channel])
-
- for (k = 0; k < sh[j]->can_queue; k++) {
-
- if (HD(j)->cp_stat[k] != IN_USE) continue;
-
- if ((&HD(j)->cp[k])->SCpnt->device != SCpnt->device) continue;
-
- cpp->link_id = k;
- HD(j)->cp_stat[i] = READY;
-
-#if defined (DEBUG_LINKED_COMMANDS)
- printk("%s: qcomm, target %d.%d:%d, pid %ld, Mbox %d ready.\n",
- BN(j), SCpnt->channel, SCpnt->target, SCpnt->lun,
- SCpnt->pid, i);
-#endif
- restore_flags(flags);
- return 0;
- }
+ if (linked_comm && SCpnt->device->queue_depth > 2
+ && TLDEV(SCpnt->device->type)) {
+ HD(j)->cp_stat[i] = READY;
+ flush_dev(SCpnt->device, 0, j, FALSE);
+ restore_flags(flags);
+ return 0;
+ }
if (wait_on_busy(sh[j]->io_port)) {
SCpnt->result = DID_ERROR << 16;
@@ -1102,27 +1238,147 @@
return FALSE;
}
-static inline void process_ready_list(unsigned int i, unsigned int j) {
+static void sort(unsigned long sk[], unsigned int da[], unsigned int n,
+ unsigned int rev) {
+ unsigned int i, j, k, y;
+ unsigned long x;
+
+ for (i = 0; i < n - 1; i++) {
+ k = i;
+
+ for (j = k + 1; j < n; j++)
+ if (rev) {
+ if (sk[j] > sk[k]) k = j;
+ }
+ else {
+ if (sk[j] < sk[k]) k = j;
+ }
+
+ if (k != i) {
+ x = sk[k]; sk[k] = sk[i]; sk[i] = x;
+ y = da[k]; da[k] = da[i]; da[i] = y;
+ }
+ }
+
+ return;
+ }
+
+static inline void reorder(unsigned int j, unsigned long cursec,
+ unsigned int ihdlr, unsigned int il[], unsigned int n_ready) {
Scsi_Cmnd *SCpnt;
- unsigned int k, n_ready = 0;
struct mscp *cpp;
+ unsigned int k, n;
+ unsigned int rev = FALSE, s = TRUE, r = TRUE;
+ unsigned int input_only = TRUE, overlap = FALSE;
+ unsigned long sl[n_ready], pl[n_ready], ll[n_ready];
+ unsigned long maxsec = 0, minsec = ULONG_MAX, seek = 0;
+
+ static unsigned int flushcount = 0, batchcount = 0, sortcount = 0;
+ static unsigned int readycount = 0, ovlcount = 0, inputcount = 0;
+ static unsigned int readysorted = 0, revcount = 0;
+ static unsigned long seeksorted = 0, seeknosort = 0;
+
+ if (link_statistics && !(++flushcount % link_statistics))
+ printk("fc %d bc %d ic %d oc %d rc %d rs %d sc %d re %d"\
+ " av %ldK as %ldK.\n", flushcount, batchcount, inputcount,
+ ovlcount, readycount, readysorted, sortcount, revcount,
+ seeknosort / (readycount - batchcount + 1),
+ seeksorted / (readycount - batchcount + 1));
+
+ if (n_ready <= 1) return;
+
+ for (n = 0; n < n_ready; n++) {
+ k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+
+ if (!(cpp->xdir == DTD_IN)) input_only = FALSE;
+
+ if (SCpnt->request.sector < minsec) minsec = SCpnt->request.sector;
+ if (SCpnt->request.sector > maxsec) maxsec = SCpnt->request.sector;
+
+ sl[n] = SCpnt->request.sector;
+
+ if (!n) continue;
+
+ if (sl[n] < sl[n - 1]) s = FALSE;
+ if (sl[n] > sl[n - 1]) r = FALSE;
+
+ if (link_statistics) {
+ if (sl[n] > sl[n - 1])
+ seek += sl[n] - sl[n - 1];
+ else
+ seek += sl[n - 1] - sl[n];
+ }
+
+ }
+
+ if (cursec > ((maxsec + minsec) / 2)) rev = TRUE;
+
+ if (!((rev && r) || (!rev && s))) sort(sl, il, n_ready, rev);
+
+ if (!input_only) for (n = 0; n < n_ready; n++) {
+ k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+ ll[n] = SCpnt->request.nr_sectors; pl[n] = SCpnt->pid;
+
+ if (!n) continue;
+
+ if ((sl[n] == sl[n - 1]) || (!rev && ((sl[n - 1] + ll[n - 1]) > sl[n]))
+ || (rev && ((sl[n] + ll[n]) > sl[n - 1]))) overlap = TRUE;
+ }
+
+ if (overlap) sort(pl, il, n_ready, FALSE);
+
+ if (link_statistics) {
+ batchcount++; readycount += n_ready, seeknosort += seek / 1024;
+ if (input_only) inputcount++;
+ if (overlap) { ovlcount++; seeksorted += seek / 1024; }
+ else seeksorted += (maxsec - minsec) / 1024;
+ if (rev && !r) { revcount++; readysorted += n_ready; }
+ if (!rev && !s) { sortcount++; readysorted += n_ready; }
+ }
+
+#if defined (DEBUG_LINKED_COMMANDS)
+ if (link_statistics && (overlap || !(flushcount % link_statistics)))
+ for (n = 0; n < n_ready; n++) {
+ k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+ printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\
+ " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
+ (ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
+ SCpnt->lun, SCpnt->pid, k, flushcount, n_ready,
+ SCpnt->request.sector, SCpnt->request.nr_sectors, cursec,
+ YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
+ YESNO(overlap), cpp->xdir);
+ }
+#endif
+}
+
+static void flush_dev(Scsi_Device *dev, unsigned long cursec, unsigned int j,
+ unsigned int ihdlr) {
+ Scsi_Cmnd *SCpnt;
+ struct mscp *cpp;
+ unsigned int k, n, n_ready = 0, il[MAX_MAILBOXES];
for (k = 0; k < sh[j]->can_queue; k++) {
- if (HD(j)->cp_stat[k] != READY) continue;
+ if (HD(j)->cp_stat[k] != READY && HD(j)->cp_stat[k] != IN_USE) continue;
+
+ cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+
+ if (SCpnt->device != dev) continue;
- cpp = &HD(j)->cp[k];
+ if (HD(j)->cp_stat[k] == IN_USE) return;
- if (cpp->link_id != i) continue;
+ il[n_ready++] = k;
+ }
- SCpnt = cpp->SCpnt;
- n_ready++;
+ reorder(j, cursec, ihdlr, il, n_ready);
+
+ for (n = 0; n < n_ready; n++) {
+ k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
if (wait_on_busy(sh[j]->io_port)) {
- printk("%s: ihdlr, target %d.%d:%d, pid %ld, Mbox %d, link_id %d, "\
- "n_ready %d, adapter busy, will abort.\n", BN(j),
- SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->pid,
- k, i, n_ready);
+ printk("%s: %s, target %d.%d:%d, pid %ld, Mbox %d, adapter"\
+ " busy, will abort.\n", BN(j), (ihdlr ? "ihdlr" : "qcomm"),
+ SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->pid, k);
HD(j)->cp_stat[k] = ABORTING;
continue;
}
@@ -1130,21 +1386,14 @@
outl(V2DEV(cpp), sh[j]->io_port + REG_OGM);
outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
HD(j)->cp_stat[k] = IN_USE;
-
-#if defined (DEBUG_LINKED_COMMANDS)
- printk("%s: ihdlr, target %d.%d:%d, pid %ld, Mbox %d in use, link_id %d,"
- " n_ready %d.\n", BN(j), SCpnt->channel, SCpnt->target,
- SCpnt->lun, SCpnt->pid, k, i, n_ready);
-#endif
}
-
}
static void u14_34f_interrupt_handler(int irq, void *dev_id,
struct pt_regs *regs) {
Scsi_Cmnd *SCpnt;
unsigned long flags;
- unsigned int i, j, k, c, status, tstatus, loops, total_loops = 0, ret;
+ unsigned int i, j, k, c, status, tstatus, loops, total_loops = 0, reg, ret;
struct mscp *spp;
save_flags(flags);
@@ -1167,7 +1416,7 @@
loops = 0;
/* Loop until all interrupts for a board are serviced */
- while (inb(sh[j]->io_port + REG_SYS_INTR) & IRQ_ASSERTED) {
+ while ((reg = inb(sh[j]->io_port + REG_SYS_INTR)) & IRQ_ASSERTED) {
total_loops++;
loops++;
@@ -1186,8 +1435,6 @@
panic("%s: ihdlr, invalid mscp bus address %p, cp0 %p.\n",
BN(j), (void *)ret, HD(j)->cp);
- if (linked_commands) process_ready_list(i, j);
-
if (HD(j)->cp_stat[i] == IGNORE) {
HD(j)->cp_stat[i] = FREE;
continue;
@@ -1223,6 +1470,10 @@
" irq %d.\n", BN(j), i, SCpnt->pid,
*(unsigned int *)SCpnt->host_scribble, irq);
+ if (linked_comm && SCpnt->device->queue_depth > 2
+ && TLDEV(SCpnt->device->type))
+ flush_dev(SCpnt->device, SCpnt->request.sector, j, TRUE);
+
tstatus = status_byte(spp->target_status);
switch (spp->adapter_status) {
@@ -1321,10 +1572,10 @@
do_trace || msg_byte(spp->target_status))
#endif
printk("%s: ihdlr, mbox %2d, err 0x%x:%x,"\
- " target %d.%d:%d, pid %ld, count %d.\n",
+ " target %d.%d:%d, pid %ld, reg 0x%x, count %d.\n",
BN(j), i, spp->adapter_status, spp->target_status,
SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->pid,
- HD(j)->iocount);
+ reg, HD(j)->iocount);
/* Set the command state to inactive */
SCpnt->host_scribble = NULL;
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov