patch-2.1.132 linux/drivers/scsi/ini9100u.c
Next file: linux/drivers/scsi/ini9100u.h
Previous file: linux/drivers/scsi/imm.c
Back to the patch index
Back to the overall index
- Lines: 1170
- Date:
Fri Dec 18 10:12:25 1998
- Orig file:
v2.1.131/linux/drivers/scsi/ini9100u.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.1.131/linux/drivers/scsi/ini9100u.c linux/drivers/scsi/ini9100u.c
@@ -0,0 +1,1169 @@
+/**************************************************************************
+ * Initio 9100 device driver for Linux.
+ *
+ * Copyright (c) 1994-1998 Initio Corporation
+ * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * --------------------------------------------------------------------------
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification, immediately at the beginning of the file.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Where this Software is combined with software released under the terms of
+ * the GNU Public License ("GPL") and the terms of the GPL would require the
+ * combined work to also be released under the terms of the GPL, the terms
+ * and conditions of this License will apply in addition to those of the
+ * GPL with the exception of any terms or conditions of this License that
+ * conflict with, or are expressly prohibited by, the GPL.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *************************************************************************
+ *
+ * DESCRIPTION:
+ *
+ * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host
+ * adapters
+ *
+ * 08/06/97 hc - v1.01h
+ * - Support inic-940 and inic-935
+ * 09/26/97 hc - v1.01i
+ * - Make correction from J.W. Schultz suggestion
+ * 10/13/97 hc - Support reset function
+ * 10/21/97 hc - v1.01j
+ * - Support 32 LUN (SCSI 3)
+ * 01/14/98 hc - v1.01k
+ * - Fix memory allocation problem
+ * 03/04/98 hc - v1.01l
+ * - Fix tape rewind which will hang the system problem
+ * - Set can_queue to tul_num_scb
+ * 06/25/98 hc - v1.01m
+ * - Get it work for kernel version >= 2.1.75
+ * - Dynamic assign SCSI bus reset holding time in init_tulip()
+ * 07/02/98 hc - v1.01n
+ * - Support 0002134A
+ * 08/07/98 hc - v1.01o
+ * - Change the tul_abort_srb routine to use scsi_done. <01>
+ * 09/07/98 hl - v1.02
+ * - Change the INI9100U define and proc_dir_entry to
+ * reflect the newer Kernel 2.1.118, but the v1.o1o
+ * should work with Kernel 2.1.118.
+ * 09/20/98 wh - v1.02a
+ * - Support Abort command.
+ * - Handle reset routine.
+ * 09/21/98 hl - v1.03
+ * - remove comments.
+ * 12/09/98 bv - v1.03a
+ * - Removed unused code
+ * 12/13/98 bv - v1.03b
+ * - Remove cli() locking for kernels >= 2.1.95. This uses
+ * spinlocks to serialize access to the pSRB_head and
+ * pSRB_tail members of the HCS structure.
+ **************************************************************************/
+
+#define CVT_LINUX_VERSION(V,P,S) (V * 65536 + P * 256 + S)
+
+#ifndef LINUX_VERSION_CODE
+#include <linux/version.h>
+#endif
+
+#ifdef MODULE
+#include <linux/module.h>
+#endif
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+#include <stdarg.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#if LINUX_VERSION_CODE <= CVT_LINUX_VERSION(2,1,92)
+#include <linux/bios32.h>
+#endif
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,23)
+#include <linux/init.h>
+#endif
+#include <linux/blk.h>
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+#include <asm/spinlock.h>
+#endif
+#include "sd.h"
+#include "scsi.h"
+#include "hosts.h"
+#include "ini9100u.h"
+#include <linux/stat.h>
+#include <linux/malloc.h>
+#include <linux/config.h>
+
+#else
+
+#include <linux/kernel.h>
+#include <linux/head.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include "../block/blk.h"
+#include "scsi.h"
+#include "sd.h"
+#include "hosts.h"
+#include <linux/malloc.h>
+#include "ini9100u.h"
+#endif
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,93)
+#ifdef CONFIG_PCI
+#include <linux/pci.h>
+#endif
+#endif
+
+#ifdef DEBUG_i91u
+unsigned int i91u_debug = DEBUG_DEFAULT;
+#endif
+
+#ifdef MODULE
+Scsi_Host_Template driver_template = INI9100U;
+#include "scsi_module.c"
+#endif
+
+char *i91uCopyright = "Copyright (C) 1996-98";
+char *i91uInitioName = "by Initio Corporation";
+char *i91uProductName = "INI-9X00U/UW";
+char *i91uVersion = "v1.03b";
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+struct proc_dir_entry proc_scsi_ini9100u =
+{
+ PROC_SCSI_INI9100U, 7, "INI9100U",
+ S_IFDIR | S_IRUGO | S_IXUGO, 2,
+ 0, 0, 0, NULL, NULL, NULL, NULL, NULL, NULL, NULL
+};
+#endif
+
+#define TULSZ(sz) (sizeof(sz) / sizeof(sz[0]))
+#define TUL_RDWORD(x,y) (short)(inl((int)((ULONG)((ULONG)x+(UCHAR)y)) ))
+
+/* set by i91_setup according to the command line */
+static int setup_called = 0;
+
+static int tul_num_ch = 4; /* Maximum 4 adapters */
+static int tul_num_scb;
+static int tul_tag_enable = 1;
+static SCB *tul_scb;
+
+#ifdef DEBUG_i91u
+static int setup_debug = 0;
+#endif
+
+static char *setup_str = (char *) NULL;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr0(int irq, void *dev_id, struct pt_regs *);
+static void i91u_intr1(int irq, void *dev_id, struct pt_regs *);
+static void i91u_intr2(int irq, void *dev_id, struct pt_regs *);
+static void i91u_intr3(int irq, void *dev_id, struct pt_regs *);
+static void i91u_intr4(int irq, void *dev_id, struct pt_regs *);
+static void i91u_intr5(int irq, void *dev_id, struct pt_regs *);
+static void i91u_intr6(int irq, void *dev_id, struct pt_regs *);
+static void i91u_intr7(int irq, void *dev_id, struct pt_regs *);
+#else
+static void i91u_intr0(int irq, struct pt_regs *);
+static void i91u_intr1(int irq, struct pt_regs *);
+static void i91u_intr2(int irq, struct pt_regs *);
+static void i91u_intr3(int irq, struct pt_regs *);
+static void i91u_intr4(int irq, struct pt_regs *);
+static void i91u_intr5(int irq, struct pt_regs *);
+static void i91u_intr6(int irq, struct pt_regs *);
+static void i91u_intr7(int irq, struct pt_regs *);
+#endif
+
+static void i91u_panic(char *msg);
+
+static void i91uSCBPost(BYTE * pHcb, BYTE * pScb);
+
+ /* ---- EXTERNAL FUNCTIONS ---- */
+ /* Get total number of adapters */
+extern void init_i91uAdapter_table(void);
+extern int Addi91u_into_Adapter_table(WORD, WORD, BYTE, BYTE, BYTE);
+extern int tul_ReturnNumberOfAdapters(void);
+extern void get_tulipPCIConfig(HCS * pHCB, int iChannel_index);
+extern int init_tulip(HCS * pHCB, SCB * pSCB, int tul_num_scb, BYTE * pbBiosAdr, int reset_time);
+extern SCB *tul_alloc_scb(HCS * pHCB);
+extern int tul_abort_srb(HCS * pHCB, Scsi_Cmnd * pSRB);
+extern void tul_exec_scb(HCS * pHCB, SCB * pSCB);
+extern void tul_release_scb(HCS * pHCB, SCB * pSCB);
+extern void tul_stop_bm(HCS * pHCB);
+extern int tul_reset_scsi(HCS * pCurHcb, int seconds);
+extern int tul_isr(HCS * pHCB);
+extern int tul_reset(HCS * pHCB, Scsi_Cmnd * pSRB, unsigned char target);
+extern int tul_reset_scsi_bus(HCS * pCurHcb);
+extern int tul_device_reset(HCS * pCurHcb, ULONG pSrb, unsigned int target, unsigned int ResetFlags);
+ /* ---- EXTERNAL VARIABLES ---- */
+extern HCS tul_hcs[];
+
+/*
+ * queue services:
+ */
+/*****************************************************************************
+ Function name : i91uAppendSRBToQueue
+ Description : This function will push current request into save list
+ Input : pSRB - Pointer to SCSI request block.
+ pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : None.
+*****************************************************************************/
+static void i91uAppendSRBToQueue(HCS * pHCB, Scsi_Cmnd * pSRB)
+{
+ ULONG flags;
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&(pHCB->pSRB_lock), flags);
+#else
+ save_flags(flags);
+ cli();
+#endif
+
+ pSRB->next = NULL; /* Pointer to next */
+
+ if (pHCB->pSRB_head == NULL)
+ pHCB->pSRB_head = pSRB;
+ else
+ pHCB->pSRB_tail->next = pSRB; /* Pointer to next */
+ pHCB->pSRB_tail = pSRB;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&(pHCB->pSRB_lock), flags);
+#else
+ restore_flags(flags);
+#endif
+ return;
+}
+
+/*****************************************************************************
+ Function name : i91uPopSRBFromQueue
+ Description : This function will pop current request from save list
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static Scsi_Cmnd *i91uPopSRBFromQueue(HCS * pHCB)
+{
+ Scsi_Cmnd *pSRB;
+ ULONG flags;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&(pHCB->pSRB_lock), flags);
+#else
+ save_flags(flags);
+ cli();
+#endif
+
+ if ((pSRB = pHCB->pSRB_head) != NULL) {
+ pHCB->pSRB_head = pHCB->pSRB_head->next;
+ pSRB->next = NULL;
+ }
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&(pHCB->pSRB_lock), flags);
+#else
+ restore_flags(flags);
+#endif
+
+ return (pSRB);
+}
+
+/* called from init/main.c */
+
+void i91u_setup(char *str, int *ints)
+{
+ if (setup_called)
+ i91u_panic("i91u: i91u_setup called twice.\n");
+
+ setup_called = ints[0];
+ setup_str = str;
+
+#ifdef DEBUG_i91u
+ setup_debug = ints[0] >= 1 ? ints[1] : DEBUG_DEFAULT;
+#endif
+}
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,93)
+int tul_NewReturnNumberOfAdapters(void)
+{
+ struct pci_dev *pDev = NULL; /* Start from none */
+ int iAdapters = 0;
+ long dRegValue;
+ WORD wBIOS;
+
+ init_i91uAdapter_table();
+
+ while ((pDev = pci_find_device(INI_VENDOR_ID, I950_DEVICE_ID, pDev)) != NULL) {
+ pci_read_config_dword(pDev, 0x44, (u32 *) & dRegValue);
+ wBIOS = (UWORD) (dRegValue & 0xFF);
+ if (((dRegValue & 0xFF00) >> 8) == 0xFF)
+ dRegValue = 0;
+ wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
+ if (Addi91u_into_Adapter_table(wBIOS,
+ (pDev->base_address[0] & 0xFFFE),
+ pDev->irq,
+ pDev->bus->number,
+ (pDev->devfn >> 3)
+ ) == 0)
+ iAdapters++;
+ }
+ while ((pDev = pci_find_device(INI_VENDOR_ID, I940_DEVICE_ID, pDev)) != NULL) {
+ pci_read_config_dword(pDev, 0x44, (u32 *) & dRegValue);
+ wBIOS = (UWORD) (dRegValue & 0xFF);
+ if (((dRegValue & 0xFF00) >> 8) == 0xFF)
+ dRegValue = 0;
+ wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
+ if (Addi91u_into_Adapter_table(wBIOS,
+ (pDev->base_address[0] & 0xFFFE),
+ pDev->irq,
+ pDev->bus->number,
+ (pDev->devfn >> 3)
+ ) == 0)
+ iAdapters++;
+ }
+ while ((pDev = pci_find_device(INI_VENDOR_ID, I935_DEVICE_ID, pDev)) != NULL) {
+ pci_read_config_dword(pDev, 0x44, (u32 *) & dRegValue);
+ wBIOS = (UWORD) (dRegValue & 0xFF);
+ if (((dRegValue & 0xFF00) >> 8) == 0xFF)
+ dRegValue = 0;
+ wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
+ if (Addi91u_into_Adapter_table(wBIOS,
+ (pDev->base_address[0] & 0xFFFE),
+ pDev->irq,
+ pDev->bus->number,
+ (pDev->devfn >> 3)
+ ) == 0)
+ iAdapters++;
+ }
+ while ((pDev = pci_find_device(INI_VENDOR_ID, 0x0002, pDev)) != NULL) {
+ pci_read_config_dword(pDev, 0x44, (u32 *) & dRegValue);
+ wBIOS = (UWORD) (dRegValue & 0xFF);
+ if (((dRegValue & 0xFF00) >> 8) == 0xFF)
+ dRegValue = 0;
+ wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
+ if (Addi91u_into_Adapter_table(wBIOS,
+ (pDev->base_address[0] & 0xFFFE),
+ pDev->irq,
+ pDev->bus->number,
+ (pDev->devfn >> 3)
+ ) == 0)
+ iAdapters++;
+ }
+
+ return (iAdapters);
+}
+
+#else /* <01> */
+
+/*****************************************************************************
+ Function name : tul_ReturnNumberOfAdapters
+ Description : This function will scan PCI bus to get all Orchid card
+ Input : None.
+ Output : None.
+ Return : SUCCESSFUL - Successful scan
+ ohterwise - No drives founded
+*****************************************************************************/
+int tul_ReturnNumberOfAdapters(void)
+{
+ unsigned int i, iAdapters;
+ unsigned int dRegValue;
+ unsigned short command;
+ WORD wBIOS, wBASE;
+ BYTE bPCIBusNum, bInterrupt, bPCIDeviceNum;
+ struct {
+ unsigned short vendor_id;
+ unsigned short device_id;
+ } const i91u_pci_devices[] =
+ {
+ {INI_VENDOR_ID, I935_DEVICE_ID},
+ {INI_VENDOR_ID, I940_DEVICE_ID},
+ {INI_VENDOR_ID, I950_DEVICE_ID},
+ {INI_VENDOR_ID, I920_DEVICE_ID}
+ };
+
+
+ iAdapters = 0;
+ /*
+ * PCI-bus probe.
+ */
+ if (pcibios_present()) {
+#ifdef MMAPIO
+ unsigned long page_offset, base;
+#endif
+
+#if LINUX_VERSION_CODE > CVT_LINUX_VERSION(2,1,92)
+ struct pci_dev *pdev = NULL;
+#else
+ int index;
+ unsigned char pci_bus, pci_devfn;
+#endif
+
+ bPCIBusNum = 0;
+ bPCIDeviceNum = 0;
+ init_i91uAdapter_table();
+ for (i = 0; i < TULSZ(i91u_pci_devices); i++) {
+#if LINUX_VERSION_CODE > CVT_LINUX_VERSION(2,1,92)
+ pdev = NULL;
+ while ((pdev = pci_find_device(i91u_pci_devices[i].vendor_id,
+ i91u_pci_devices[i].device_id,
+ pdev)))
+#else
+ index = 0;
+ while (!(pcibios_find_device(i91u_pci_devices[i].vendor_id,
+ i91u_pci_devices[i].device_id,
+ index++, &pci_bus, &pci_devfn)))
+#endif
+ {
+ if (i == 0) {
+ /*
+ printk("i91u: The RAID controller is not supported by\n");
+ printk("i91u: this driver, we are ignoring it.\n");
+ */
+ } else {
+ /*
+ * Read sundry information from PCI BIOS.
+ */
+#if LINUX_VERSION_CODE > CVT_LINUX_VERSION(2,1,92)
+ bPCIBusNum = pdev->bus->number;
+ bPCIDeviceNum = pdev->devfn;
+ dRegValue = pdev->base_address[0];
+ if (dRegValue == -1) { /* Check return code */
+ printk("\n\ri91u: tulip read configuration error.\n");
+ return (0); /* Read configuration space error */
+ }
+ /* <02> read from base address + 0x50 offset to get the wBIOS balue. */
+ wBASE = (WORD) dRegValue;
+
+ /* Now read the interrupt line */
+ dRegValue = pdev->irq;
+ bInterrupt = dRegValue & 0xFF; /* Assign interrupt line */
+ pci_read_config_word(pdev, PCI_COMMAND, &command);
+ pci_write_config_word(pdev, PCI_COMMAND,
+ command | PCI_COMMAND_MASTER | PCI_COMMAND_IO);
+
+#else
+ bPCIBusNum = pci_bus;
+ bPCIDeviceNum = pci_devfn;
+ pcibios_read_config_dword(pci_bus, pci_devfn, PCI_BASE_ADDRESS_0,
+ &dRegValue);
+ if (dRegValue == -1) { /* Check return code */
+ printk("\n\ri91u: tulip read configuration error.\n");
+ return (0); /* Read configuration space error */
+ }
+ /* <02> read from base address + 0x50 offset to get the wBIOS balue. */
+ wBASE = (WORD) dRegValue;
+
+ /* Now read the interrupt line */
+ pcibios_read_config_dword(pci_bus, pci_devfn, PCI_INTERRUPT_LINE,
+ &dRegValue);
+ bInterrupt = dRegValue & 0xFF; /* Assign interrupt line */
+ pcibios_read_config_word(pci_bus, pci_devfn, PCI_COMMAND, &command);
+ pcibios_write_config_word(pci_bus, pci_devfn, PCI_COMMAND,
+ command | PCI_COMMAND_MASTER | PCI_COMMAND_IO);
+#endif
+ wBASE &= PCI_BASE_ADDRESS_IO_MASK;
+ wBIOS = TUL_RDWORD(wBASE, 0x50);
+
+#ifdef MMAPIO
+ base = wBASE & PAGE_MASK;
+ page_offset = wBASE - base;
+
+ /*
+ * replace the next line with this one if you are using 2.1.x:
+ * temp_p->maddr = ioremap(base, page_offset + 256);
+ */
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,0)
+ wBASE = ioremap(base, page_offset + 256);
+#else
+ wBASE = (WORD) vremap(base, page_offset + 256);
+#endif
+ if (wBASE) {
+ wBASE += page_offset;
+ }
+#endif
+
+ if (Addi91u_into_Adapter_table(wBIOS, wBASE, bInterrupt, bPCIBusNum,
+ bPCIDeviceNum) == 0x0)
+ iAdapters++;
+ }
+ } /* while(pdev=....) */
+ } /* for PCI_DEVICES */
+ } /* PCI BIOS present */
+ return (iAdapters);
+}
+#endif
+
+int i91u_detect(Scsi_Host_Template * tpnt)
+{
+ SCB *pSCB;
+ HCS *pHCB;
+ struct Scsi_Host *hreg;
+ unsigned long i; /* 01/14/98 */
+ int ok = 0, iAdapters;
+ ULONG dBiosAdr;
+ BYTE *pbBiosAdr;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ tpnt->proc_dir = &proc_scsi_ini9100u;
+#endif
+
+ if (setup_called) { /* Setup by i91u_setup */
+ printk("i91u: processing commandline: ");
+
+#ifdef DEBUG_i91u
+ if (setup_called > 1) {
+ printk("\ni91u: %s\n", setup_str);
+ printk("i91u: usage: i91u[=<DEBUG>]\n");
+ i91u_panic("i91u panics in line %d", __LINE__);
+ }
+ i91u_debug = setup_debug;
+#endif
+ }
+ /* Get total number of adapters in the motherboard */
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,93)
+#ifdef CONFIG_PCI
+ iAdapters = tul_NewReturnNumberOfAdapters();
+#else
+ iAdapters = tul_ReturnNumberOfAdapters();
+#endif
+#else
+ iAdapters = tul_ReturnNumberOfAdapters();
+#endif
+
+ if (iAdapters == 0) /* If no tulip founded, return */
+ return (0);
+
+ tul_num_ch = (iAdapters > tul_num_ch) ? tul_num_ch : iAdapters;
+ /* Update actually channel number */
+ if (tul_tag_enable) { /* 1.01i */
+ tul_num_scb = MAX_TARGETS * i91u_MAXQUEUE;
+ } else {
+ tul_num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */
+ } /* Update actually SCBs per adapter */
+
+ /* Get total memory needed for HCS */
+ i = tul_num_ch * sizeof(HCS);
+ memset((unsigned char *) &tul_hcs[0], 0, i); /* Initialize tul_hcs 0 */
+ /* Get total memory needed for SCB */
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ for (; tul_num_scb >= MAX_TARGETS + 3; tul_num_scb--) {
+ i = tul_num_ch * tul_num_scb * sizeof(SCB);
+ if ((tul_scb = (SCB *) kmalloc(i, GFP_ATOMIC | GFP_DMA)) != NULL)
+ break;
+ }
+#else
+ i = tul_num_ch * tul_num_scb * sizeof(SCB);
+ tul_scb = (SCB *) scsi_init_malloc(i, GFP_ATOMIC | GFP_DMA);
+#endif
+ if (tul_scb == NULL) {
+ printk("i91u: SCB memory allocation error\n");
+ return (0);
+ }
+ memset((unsigned char *) tul_scb, 0, i);
+
+ pSCB = tul_scb;
+ for (i = 0; i < tul_num_ch * tul_num_scb; i++, pSCB++) {
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ pSCB->SCB_SGPAddr = (U32) VIRT_TO_BUS(&pSCB->SCB_SGList[0]);
+#else
+ pSCB->SCB_SGPAddr = (U32) (&pSCB->SCB_SGList[0]);
+#endif
+ }
+
+ for (i = 0, pHCB = &tul_hcs[0]; /* Get pointer for control block */
+ i < tul_num_ch;
+ i++, pHCB++) {
+ pHCB->pSRB_head = NULL; /* Initial SRB save queue */
+ pHCB->pSRB_tail = NULL; /* Initial SRB save queue */
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ pHCB->pSRB_lock = SPIN_LOCK_UNLOCKED; /* SRB save queue lock */
+#endif
+ request_region(pHCB->HCS_Base, 0x100, "i91u"); /* Register */
+
+ get_tulipPCIConfig(pHCB, i);
+
+ dBiosAdr = pHCB->HCS_BIOS;
+ dBiosAdr = (dBiosAdr << 4);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ pbBiosAdr = phys_to_virt(dBiosAdr);
+#endif
+
+ init_tulip(pHCB, tul_scb + (i * tul_num_scb), tul_num_scb, pbBiosAdr, 10);
+ pHCB->HCS_Index = i; /* 7/29/98 */
+ hreg = scsi_register(tpnt, sizeof(HCS));
+ hreg->io_port = pHCB->HCS_Base;
+ hreg->n_io_port = 0xff;
+ hreg->can_queue = tul_num_scb; /* 03/05/98 */
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ hreg->unique_id = pHCB->HCS_Base;
+ hreg->max_id = pHCB->HCS_MaxTar;
+#endif
+ hreg->max_lun = 32; /* 10/21/97 */
+ hreg->irq = pHCB->HCS_Intr;
+ hreg->this_id = pHCB->HCS_SCSI_ID; /* Assign HCS index */
+ hreg->base = (UCHAR *) pHCB;
+ hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */
+
+ /* Initial tulip chip */
+ switch (i) {
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ case 0:
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr0, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);
+ break;
+ case 1:
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr1, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);
+ break;
+ case 2:
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr2, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);
+ break;
+ case 3:
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr3, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);
+ break;
+ case 4:
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr4, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);
+ break;
+ case 5:
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr5, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);
+ break;
+ case 6:
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr6, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);
+ break;
+ case 7:
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr7, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);
+ break;
+ default:
+ i91u_panic("i91u: Too many host adapters\n");
+ break;
+ }
+ if (ok < 0) {
+ if (ok == -EINVAL) {
+ printk("i91u: bad IRQ %d.\n", pHCB->HCS_Intr);
+ printk(" Contact author.\n");
+ } else if (ok == -EBUSY)
+ printk("i91u: IRQ %d already in use. Configure another.\n",
+ pHCB->HCS_Intr);
+ else {
+ printk("\ni91u: Unexpected error code on requesting IRQ %d.\n",
+ pHCB->HCS_Intr);
+ printk(" Contact author.\n");
+ }
+ i91u_panic("i91u: driver needs an IRQ.\n");
+ }
+#endif
+ }
+
+ tpnt->this_id = -1;
+ tpnt->can_queue = 1;
+
+ return 1;
+}
+
+static void i91uBuildSCB(HCS * pHCB, SCB * pSCB, Scsi_Cmnd * SCpnt)
+{ /* Create corresponding SCB */
+ struct scatterlist *pSrbSG;
+ SG *pSG; /* Pointer to SG list */
+ int i;
+ long TotalLen;
+
+ pSCB->SCB_Post = i91uSCBPost; /* i91u's callback routine */
+ pSCB->SCB_Srb = SCpnt;
+ pSCB->SCB_Opcode = ExecSCSI;
+ pSCB->SCB_Flags = SCF_POST; /* After SCSI done, call post routine */
+ pSCB->SCB_Target = SCpnt->target;
+ pSCB->SCB_Lun = SCpnt->lun;
+ pSCB->SCB_Ident = SCpnt->lun | DISC_ALLOW;
+ pSCB->SCB_Flags |= SCF_SENSE; /* Turn on auto request sense */
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ pSCB->SCB_SensePtr = (U32) VIRT_TO_BUS(SCpnt->sense_buffer);
+#else
+ pSCB->SCB_SensePtr = (U32) (SCpnt->sense_buffer);
+#endif
+
+ pSCB->SCB_SenseLen = SENSE_SIZE;
+
+ pSCB->SCB_CDBLen = SCpnt->cmd_len;
+ pSCB->SCB_HaStat = 0;
+ pSCB->SCB_TaStat = 0;
+ memcpy(&pSCB->SCB_CDB[0], &SCpnt->cmnd, SCpnt->cmd_len);
+
+ if (SCpnt->device->tagged_supported) { /* Tag Support */
+ pSCB->SCB_TagMsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
+ } else {
+ pSCB->SCB_TagMsg = 0; /* No tag support */
+ }
+
+ if (SCpnt->use_sg) {
+ pSrbSG = (struct scatterlist *) SCpnt->request_buffer;
+ if (SCpnt->use_sg == 1) { /* If only one entry in the list *//* treat it as regular I/O */
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ pSCB->SCB_BufPtr = (U32) VIRT_TO_BUS(pSrbSG->address);
+#else
+ pSCB->SCB_BufPtr = (U32) (pSrbSG->address);
+#endif
+ TotalLen = pSrbSG->length;
+ pSCB->SCB_SGLen = 0;
+ } else { /* Assign SG physical address */
+ pSCB->SCB_BufPtr = pSCB->SCB_SGPAddr;
+ pSCB->SCB_Flags |= SCF_SG; /* Turn on SG list flag */
+ for (i = 0, TotalLen = 0, pSG = &pSCB->SCB_SGList[0]; /* 1.01g */
+ i < SCpnt->use_sg;
+ i++, pSG++, pSrbSG++) {
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ pSG->SG_Ptr = (U32) VIRT_TO_BUS(pSrbSG->address);
+#else
+ pSG->SG_Ptr = (U32) (pSrbSG->address);
+#endif
+ TotalLen += pSG->SG_Len = pSrbSG->length;
+ }
+ pSCB->SCB_SGLen = i;
+ }
+ pSCB->SCB_BufLen = (SCpnt->request_bufflen > TotalLen) ?
+ TotalLen : SCpnt->request_bufflen;
+ } else { /* Non SG */
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+ pSCB->SCB_BufPtr = (U32) VIRT_TO_BUS(SCpnt->request_buffer);
+#else
+ pSCB->SCB_BufPtr = (U32) (SCpnt->request_buffer);
+#endif
+ pSCB->SCB_BufLen = SCpnt->request_bufflen;
+ pSCB->SCB_SGLen = 0;
+ }
+
+ return;
+}
+
+/*
+ * Queue a command and setup interrupts for a free bus.
+ */
+int i91u_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+{
+ register SCB *pSCB;
+ HCS *pHCB; /* Point to Host adapter control block */
+
+ if (SCpnt->lun > 16) { /* 07/22/98 */
+
+ SCpnt->result = (DID_TIME_OUT << 16);
+ done(SCpnt); /* Notify system DONE */
+ return (0);
+ }
+ pHCB = (HCS *) SCpnt->host->base;
+
+ SCpnt->scsi_done = done;
+ /* Get free SCSI control block */
+ if ((pSCB = tul_alloc_scb(pHCB)) == NULL) {
+ i91uAppendSRBToQueue(pHCB, SCpnt); /* Buffer this request */
+ return (0);
+ }
+ i91uBuildSCB(pHCB, pSCB, SCpnt);
+ tul_exec_scb(pHCB, pSCB); /* Start execute SCB */
+ return (0);
+}
+
+/*
+ * We only support command in interrupt-driven fashion
+ */
+int i91u_command(Scsi_Cmnd * SCpnt)
+{
+ printk("i91u: interrupt driven driver; use i91u_queue()\n");
+ return -1;
+}
+
+/*
+ * Abort a queued command
+ * (commands that are on the bus can't be aborted easily)
+ */
+int i91u_abort(Scsi_Cmnd * SCpnt)
+{
+ HCS *pHCB;
+
+ pHCB = (HCS *) SCpnt->host->base;
+ return tul_abort_srb(pHCB, SCpnt);
+}
+
+/*
+ * Reset registers, reset a hanging bus and
+ * kill active and disconnected commands for target w/o soft reset
+ */
+int i91u_reset(Scsi_Cmnd * SCpnt, unsigned int reset_flags)
+{ /* I need Host Control Block Information */
+ HCS *pHCB;
+
+ pHCB = (HCS *) SCpnt->host->base;
+
+ if (reset_flags & (SCSI_RESET_SUGGEST_BUS_RESET | SCSI_RESET_SUGGEST_HOST_RESET))
+ return tul_reset_scsi_bus(pHCB);
+ else
+ return tul_device_reset(pHCB, (ULONG) SCpnt, SCpnt->target, reset_flags);
+}
+
+/*
+ * Return the "logical geometry"
+ */
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+int i91u_biosparam(Scsi_Disk * disk, kdev_t dev, int *info_array)
+#else
+int i91u_biosparam(Scsi_Disk * disk, int dev, int *info_array)
+#endif
+{
+ HCS *pHcb; /* Point to Host adapter control block */
+ TCS *pTcb;
+
+ pHcb = (HCS *) disk->device->host->base;
+ pTcb = &pHcb->HCS_Tcs[disk->device->id];
+
+ if (pTcb->TCS_DrvHead) {
+ info_array[0] = pTcb->TCS_DrvHead;
+ info_array[1] = pTcb->TCS_DrvSector;
+ info_array[2] = disk->capacity / pTcb->TCS_DrvHead / pTcb->TCS_DrvSector;
+ } else {
+ if (pTcb->TCS_DrvFlags & TCF_DRV_255_63) {
+ info_array[0] = 255;
+ info_array[1] = 63;
+ info_array[2] = disk->capacity / 255 / 63;
+ } else {
+ info_array[0] = 64;
+ info_array[1] = 32;
+ info_array[2] = disk->capacity >> 11;
+ }
+ }
+
+#if defined(DEBUG_BIOSPARAM)
+ if (i91u_debug & debug_biosparam) {
+ printk("bios geometry: head=%d, sec=%d, cyl=%d\n",
+ info_array[0], info_array[1], info_array[2]);
+ printk("WARNING: check, if the bios geometry is correct.\n");
+ }
+#endif
+
+ return 0;
+}
+
+/*****************************************************************************
+ Function name : i91uSCBPost
+ Description : This is callback routine be called when tulip finish one
+ SCSI command.
+ Input : pHCB - Pointer to host adapter control block.
+ pSCB - Pointer to SCSI control block.
+ Output : None.
+ Return : None.
+*****************************************************************************/
+static void i91uSCBPost(BYTE * pHcb, BYTE * pScb)
+{
+ Scsi_Cmnd *pSRB; /* Pointer to SCSI request block */
+ HCS *pHCB;
+ SCB *pSCB;
+
+ pHCB = (HCS *) pHcb;
+ pSCB = (SCB *) pScb;
+ if ((pSRB = pSCB->SCB_Srb) == 0) {
+ printk("i91uSCBPost: SRB pointer is empty\n");
+
+ tul_release_scb(pHCB, pSCB); /* Release SCB for current channel */
+ return;
+ }
+ switch (pSCB->SCB_HaStat) {
+ case 0x0:
+ case 0xa: /* Linked command complete without error and linked normally */
+ case 0xb: /* Linked command complete without error interrupt generated */
+ pSCB->SCB_HaStat = 0;
+ break;
+
+ case 0x11: /* Selection time out-The initiator selection or target
+ reselection was not complete within the SCSI Time out period */
+ pSCB->SCB_HaStat = DID_TIME_OUT;
+ break;
+
+ case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
+ phase sequence was requested by the target. The host adapter
+ will generate a SCSI Reset Condition, notifying the host with
+ a SCRD interrupt */
+ pSCB->SCB_HaStat = DID_RESET;
+ break;
+
+ case 0x1a: /* SCB Aborted. 07/21/98 */
+ pSCB->SCB_HaStat = DID_ABORT;
+ break;
+
+ case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
+ than was allocated by the Data Length field or the sum of the
+ Scatter / Gather Data Length fields. */
+ case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
+ case 0x16: /* Invalid SCB Operation Code. */
+
+ default:
+ printk("ini9100u: %x %x\n", pSCB->SCB_HaStat, pSCB->SCB_TaStat);
+ pSCB->SCB_HaStat = DID_ERROR; /* Couldn't find any better */
+ break;
+ }
+
+ pSRB->result = pSCB->SCB_TaStat | (pSCB->SCB_HaStat << 16);
+
+ if (pSRB == NULL) {
+ printk("pSRB is NULL\n");
+ }
+ pSRB->scsi_done(pSRB); /* Notify system DONE */
+ if ((pSRB = i91uPopSRBFromQueue(pHCB)) != NULL)
+ /* Find the next pending SRB */
+ { /* Assume resend will success */
+ /* Reuse old SCB */
+ i91uBuildSCB(pHCB, pSCB, pSRB); /* Create corresponding SCB */
+
+ tul_exec_scb(pHCB, pSCB); /* Start execute SCB */
+ } else { /* No Pending SRB */
+ tul_release_scb(pHCB, pSCB); /* Release SCB for current channel */
+ }
+ return;
+}
+
+/*
+ * Interrupts handler (main routine of the driver)
+ */
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr0(int irqno, void *dev_id, struct pt_regs *regs)
+#else
+static void i91u_intr0(int irqno, struct pt_regs *regs)
+#endif
+{
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ unsigned long flags;
+#endif
+
+ if (tul_hcs[0].HCS_Intr != irqno)
+ return;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&io_request_lock, flags);
+#endif
+
+ tul_isr(&tul_hcs[0]);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&io_request_lock, flags);
+#endif
+}
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr1(int irqno, void *dev_id, struct pt_regs *regs)
+#else
+static void i91u_intr1(int irqno, struct pt_regs *regs)
+#endif
+{
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ unsigned long flags;
+#endif
+
+ if (tul_hcs[1].HCS_Intr != irqno)
+ return;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&io_request_lock, flags);
+#endif
+
+ tul_isr(&tul_hcs[1]);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&io_request_lock, flags);
+#endif
+}
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr2(int irqno, void *dev_id, struct pt_regs *regs)
+#else
+static void i91u_intr2(int irqno, struct pt_regs *regs)
+#endif
+{
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ unsigned long flags;
+#endif
+
+ if (tul_hcs[2].HCS_Intr != irqno)
+ return;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&io_request_lock, flags);
+#endif
+
+ tul_isr(&tul_hcs[2]);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&io_request_lock, flags);
+#endif
+}
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr3(int irqno, void *dev_id, struct pt_regs *regs)
+#else
+static void i91u_intr3(int irqno, struct pt_regs *regs)
+#endif
+{
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ unsigned long flags;
+#endif
+
+ if (tul_hcs[3].HCS_Intr != irqno)
+ return;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&io_request_lock, flags);
+#endif
+
+ tul_isr(&tul_hcs[3]);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&io_request_lock, flags);
+#endif
+}
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr4(int irqno, void *dev_id, struct pt_regs *regs)
+#else
+static void i91u_intr4(int irqno, struct pt_regs *regs)
+#endif
+{
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ unsigned long flags;
+#endif
+
+ if (tul_hcs[4].HCS_Intr != irqno)
+ return;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&io_request_lock, flags);
+#endif
+
+ tul_isr(&tul_hcs[4]);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&io_request_lock, flags);
+#endif
+}
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr5(int irqno, void *dev_id, struct pt_regs *regs)
+#else
+static void i91u_intr5(int irqno, struct pt_regs *regs)
+#endif
+{
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ unsigned long flags;
+#endif
+
+ if (tul_hcs[5].HCS_Intr != irqno)
+ return;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&io_request_lock, flags);
+#endif
+
+ tul_isr(&tul_hcs[5]);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&io_request_lock, flags);
+#endif
+}
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr6(int irqno, void *dev_id, struct pt_regs *regs)
+#else
+static void i91u_intr6(int irqno, struct pt_regs *regs)
+#endif
+{
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ unsigned long flags;
+#endif
+
+ if (tul_hcs[6].HCS_Intr != irqno)
+ return;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&io_request_lock, flags);
+#endif
+
+ tul_isr(&tul_hcs[6]);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&io_request_lock, flags);
+#endif
+}
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)
+static void i91u_intr7(int irqno, void *dev_id, struct pt_regs *regs)
+#else
+static void i91u_intr7(int irqno, struct pt_regs *regs)
+#endif
+{
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ unsigned long flags;
+#endif
+
+ if (tul_hcs[7].HCS_Intr != irqno)
+ return;
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_lock_irqsave(&io_request_lock, flags);
+#endif
+
+ tul_isr(&tul_hcs[7]);
+
+#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
+ spin_unlock_irqrestore(&io_request_lock, flags);
+#endif
+}
+
+/*
+ * Dump the current driver status and panic...
+ */
+static void i91u_panic(char *msg)
+{
+ printk("\ni91u_panic: %s\n", msg);
+ panic("i91u panic");
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov