patch-2.1.132 linux/drivers/net/epic100.c
Next file: linux/drivers/net/es3210.c
Previous file: linux/drivers/net/e2100.c
Back to the patch index
Back to the overall index
- Lines: 1860
- Date:
Fri Dec 18 08:06:39 1998
- Orig file:
v2.1.131/linux/drivers/net/epic100.c
- Orig date:
Fri May 8 23:14:48 1998
diff -u --recursive --new-file v2.1.131/linux/drivers/net/epic100.c linux/drivers/net/epic100.c
@@ -1,25 +1,24 @@
-/* epic100.c: A SMC 83c170 EPIC/100 fast ethernet driver for Linux. */
+/* epic100.c: A SMC 83c170 EPIC/100 Fast Ethernet driver for Linux. */
/*
- NOTICE: THIS IS THE ALPHA TEST VERSION!
- Written 1997 by Donald Becker.
+ Written/copyright 1997-1998 by Donald Becker.
This software may be used and distributed according to the terms
of the GNU Public License, incorporated herein by reference.
- All other rights reserved.
+ All other rights reserved.
- This driver is for the SMC EtherPower II 9432 PCI ethernet adapter based on
- the SMC83c170.
+ This driver is for the SMC83c170/175 "EPIC" series, as used on the
+ SMC EtherPower II 9432 PCI adapter, and several CardBus cards.
The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
- Center of Excellence in Space Data and Information Sciences
+ USRA Center of Excellence in Space Data and Information Sciences
Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
- Support and updates available at
+ Information and updates available at
http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html
*/
static const char *version =
-"epic100.c:v0.10 10/14/97 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html\n";
+"epic100.c:v1.04 8/23/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/epic100.html\n";
/* A few user-configurable values. */
@@ -32,7 +31,7 @@
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
Setting to > 1518 effectively disables this feature. */
-static const int rx_copybreak = 200;
+static int rx_copybreak = 200;
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
static int max_interrupt_work = 10;
@@ -44,16 +43,15 @@
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
/* Bytes transferred to chip before transmission starts. */
-#define TX_FIFO_THRESH 128 /* Rounded down to 4 byte units. */
+#define TX_FIFO_THRESH 256 /* Rounded down to 4 byte units. */
#define RX_FIFO_THRESH 1 /* 0-3, 0==32, 64,96, or 3==128 bytes */
-#include <linux/config.h>
+#include <linux/version.h> /* Evil, but neccessary */
#ifdef MODULE
#ifdef MODVERSIONS
#include <linux/modversions.h>
#endif
#include <linux/module.h>
-#include <linux/version.h>
#else
#define MOD_INC_USE_COUNT
#define MOD_DEC_USE_COUNT
@@ -69,6 +67,13 @@
#include <linux/malloc.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#if LINUX_VERSION_CODE >= 0x20155
+#define PCI_SUPPORT_VER2
+#else
+#include <linux/bios32.h>
+#endif
+#include <linux/delay.h>
+
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/bitops.h>
#include <asm/io.h>
@@ -80,70 +85,39 @@
/* Kernel compatibility defines, common to David Hind's PCMCIA package.
This is only in the support-all-kernels source code. */
-#include <linux/version.h> /* Evil, but neccessary */
-#if defined (LINUX_VERSION_CODE) && LINUX_VERSION_CODE < 0x10300
-#define RUN_AT(x) (x) /* What to put in timer->expires. */
-#define DEV_ALLOC_SKB(len) alloc_skb(len, GFP_ATOMIC)
-#define virt_to_bus(addr) ((unsigned long)addr)
-#define bus_to_virt(addr) ((void*)addr)
-
-#else /* 1.3.0 and later */
-#define RUN_AT(x) (jiffies + (x))
-#define DEV_ALLOC_SKB(len) dev_alloc_skb(len + 2)
+#if ! defined (LINUX_VERSION_CODE) || LINUX_VERSION_CODE < 0x20000
+#warning This driver version is only for kernel versions 2.0.0 and later.
#endif
-#if defined (LINUX_VERSION_CODE) && LINUX_VERSION_CODE < 0x10338
-#ifdef MODULE
-#if !defined(CONFIG_MODVERSIONS) && !defined(__NO_VERSION__)
-char kernel_version[] = UTS_RELEASE;
-#endif
-#else
-#undef MOD_INC_USE_COUNT
-#define MOD_INC_USE_COUNT
-#undef MOD_DEC_USE_COUNT
-#define MOD_DEC_USE_COUNT
-#endif
-#endif /* 1.3.38 */
-
-#if (LINUX_VERSION_CODE >= 0x10344)
-#define NEW_MULTICAST
-#include <linux/delay.h>
-#endif
-
-#ifdef SA_SHIRQ
-#define FREE_IRQ(irqnum, dev) free_irq(irqnum, dev)
-#define REQUEST_IRQ(i,h,f,n, instance) request_irq(i,h,f,n, instance)
-#define IRQ(irq, dev_id, pt_regs) (irq, dev_id, pt_regs)
-#else
-#define FREE_IRQ(irqnum, dev) free_irq(irqnum)
-#define REQUEST_IRQ(i,h,f,n, instance) request_irq(i,h,f,n)
-#define IRQ(irq, dev_id, pt_regs) (irq, pt_regs)
-#endif
+#define RUN_AT(x) (jiffies + (x))
-#if (LINUX_VERSION_CODE < 0x20123)
-#define test_and_set_bit(val, addr) set_bit(val, addr)
-#include <linux/bios32.h>
-#else
-#ifdef MODULE
+#if defined(MODULE) && (LINUX_VERSION_CODE >= 0x20115)
MODULE_AUTHOR("Donald Becker <becker@cesdis.gsfc.nasa.gov>");
-MODULE_DESCRIPTION("SMC 82c170 EPIC series Ethernet driver");
+MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
MODULE_PARM(debug, "i");
MODULE_PARM(options, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(full_duplex, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(rx_copybreak, "i");
MODULE_PARM(max_interrupt_work, "i");
#endif
+#if LINUX_VERSION_CODE < 0x20123
+#define test_and_set_bit(val, addr) set_bit(val, addr)
+#endif
+#if LINUX_VERSION_CODE <= 0x20139
+#define net_device_stats enet_statistics
+#define NETSTATS_VER2
+#endif
+#if LINUX_VERSION_CODE < 0x20159
+#define DEV_FREE_SKB(skb) dev_kfree_skb(skb, FREE_WRITE);
+#else /* Grrr, unneeded incompatible change. */
+#define DEV_FREE_SKB(skb) dev_kfree_skb(skb);
#endif
/* The I/O extent. */
#define EPIC_TOTAL_SIZE 0x100
-#ifdef HAVE_DEVLIST
-struct netdev_entry epic100_drv =
-{"Epic100", epic100_pci_probe, EPIC_TOTAL_SIZE, NULL};
-#endif
-
+#define epic_debug debug
static int epic_debug = 1;
/*
@@ -152,7 +126,7 @@
I. Board Compatibility
This device driver is designed for the SMC "EPCI/100", the SMC
-single-chip ethernet controllers for PCI. This chip is used on
+single-chip Ethernet controllers for PCI. This chip is used on
the SMC EtherPower II boards.
@@ -178,17 +152,34 @@
*/
-#ifndef PCI_VENDOR_ID_SMC
-#define PCI_VENDOR_ID_SMC 0x10B8
-#endif
-#ifndef PCI_DEVICE_ID_SMC_EPIC100
-#define PCI_DEVICE_ID_SMC_EPIC100 0x0005
-#endif
-
/* The rest of these values should never change. */
+
+static struct device *epic_probe1(int pci_bus, int pci_devfn,
+ struct device *dev, long ioaddr, int irq,
+ int chip_id, int card_idx);
+
+enum pci_flags_bit {
+ PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
+ PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
+};
+struct chip_info {
+ const char *name;
+ u16 vendor_id, device_id, device_id_mask, pci_flags;
+ int io_size, min_latency;
+ struct device *(*probe1)(int pci_bus, int pci_devfn, struct device *dev,
+ long ioaddr, int irq, int chip_idx, int fnd_cnt);
+} chip_tbl[] = {
+ {"SMSC EPIC/100 83c170", 0x10B8, 0x0005, 0x7fff,
+ PCI_USES_IO|PCI_USES_MASTER|PCI_ADDR0, EPIC_TOTAL_SIZE, 32, epic_probe1},
+ {"SMSC EPIC/C 83c175", 0x10B8, 0x0006, 0x7fff,
+ PCI_USES_IO|PCI_USES_MASTER|PCI_ADDR0, EPIC_TOTAL_SIZE, 32, epic_probe1},
+ {0,},
+};
+
/* Offsets to registers, using the (ugh) SMC names. */
enum epic_registers {
COMMAND=0, INTSTAT=4, INTMASK=8, GENCTL=0x0C, NVCTL=0x10, EECTL=0x14,
+ PCIBurstCnt=0x18,
TEST1=0x1C, CRCCNT=0x20, ALICNT=0x24, MPCNT=0x28, /* Rx error counters. */
MIICtrl=0x30, MIIData=0x34, MIICfg=0x38,
LAN0=64, /* MAC address. */
@@ -199,8 +190,9 @@
/* Interrupt register bits, using my own meaningful names. */
enum IntrStatus {
- TxIdle=0x40000, RxIdle=0x20000,
- CntFull=0x0200, TxUnderrun=0x0100,
+ TxIdle=0x40000, RxIdle=0x20000, IntrSummary=0x010000,
+ PCIBusErr170=0x7000, PCIBusErr175=0x1000, PhyEvent175=0x8000,
+ RxStarted=0x0800, RxEarlyWarn=0x0400, CntFull=0x0200, TxUnderrun=0x0100,
TxEmpty=0x0080, TxDone=0x0020, RxError=0x0010,
RxOverflow=0x0008, RxFull=0x0004, RxHeader=0x0002, RxDone=0x0001,
};
@@ -213,7 +205,7 @@
u32 bufaddr;
u16 buflength;
u16 control;
- u32 next;
+ u32 next;
};
struct epic_rx_desc {
@@ -221,29 +213,36 @@
u16 rxlength;
u32 bufaddr;
u32 buflength;
- u32 next;
+ u32 next;
};
struct epic_private {
char devname[8]; /* Used only for kernel debugging. */
const char *product_name;
struct device *next_module;
+
+ /* Rx and Rx rings here so that they remain paragraph aligned. */
struct epic_rx_desc rx_ring[RX_RING_SIZE];
struct epic_tx_desc tx_ring[TX_RING_SIZE];
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
struct sk_buff* tx_skbuff[TX_RING_SIZE];
/* The addresses of receive-in-place skbuffs. */
struct sk_buff* rx_skbuff[RX_RING_SIZE];
- int chip_id;
- int revision;
- struct enet_statistics stats;
- struct timer_list timer; /* Media selection timer. */
+
+ /* Ring pointers. */
unsigned int cur_rx, cur_tx; /* The next free ring entry */
unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
+
+ u8 pci_bus, pci_dev_fn; /* PCI bus location. */
+ u16 chip_id;
+
+ struct net_device_stats stats;
+ struct timer_list timer; /* Media selection timer. */
unsigned char mc_filter[8];
signed char phys[4]; /* MII device addresses. */
unsigned int tx_full:1; /* The Tx queue is full. */
- unsigned int full_duplex:1; /* Full-duplex operation requested. */
+ unsigned int full_duplex:1; /* Current duplex setting. */
+ unsigned int force_fd:1; /* Full-duplex operation requested. */
unsigned int default_port:4; /* Last dev->if_port value. */
unsigned int media2:4; /* Secondary monitored media port. */
unsigned int medialock:1; /* Don't sense media type. */
@@ -251,162 +250,174 @@
int pad0, pad1; /* Used for 8-byte alignment */
};
-static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-#ifdef MODULE
/* Used to pass the full-duplex flag, etc. */
-static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-#endif
+#define MAX_UNITS 8
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static struct device *epic100_probe1(struct device *dev, int ioaddr, int irq,
- int chip_id, int options, int card_idx);
static int epic_open(struct device *dev);
-static int read_eeprom(int ioaddr, int location);
-static int mii_read(int ioaddr, int phy_id, int location);
+static int read_eeprom(long ioaddr, int location);
+static int mdio_read(long ioaddr, int phy_id, int location);
+static void mdio_write(long ioaddr, int phy_id, int location, int value);
+static void epic_restart(struct device *dev);
static void epic_timer(unsigned long data);
static void epic_tx_timeout(struct device *dev);
static void epic_init_ring(struct device *dev);
static int epic_start_xmit(struct sk_buff *skb, struct device *dev);
static int epic_rx(struct device *dev);
static void epic_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int mii_ioctl(struct device *dev, struct ifreq *rq, int cmd);
static int epic_close(struct device *dev);
-static struct enet_statistics *epic_get_stats(struct device *dev);
-#ifdef NEW_MULTICAST
+static struct net_device_stats *epic_get_stats(struct device *dev);
static void set_rx_mode(struct device *dev);
-#else
-static void set_rx_mode(struct device *dev, int num_addrs, void *addrs);
-#endif
-
-#ifdef MODULE
/* A list of all installed EPIC devices, for removing the driver module. */
static struct device *root_epic_dev = NULL;
-#endif
+#ifndef CARDBUS
int epic100_probe(struct device *dev)
{
int cards_found = 0;
- static int pci_index = 0; /* Static, for multiple probe calls. */
-
- /* Ideally we would detect all network cards in slot order. That would
- be best done a central PCI probe dispatch, which wouldn't work
- well with the current structure. So instead we detect just the
- Epic cards in slot order. */
+ int chip_idx, irq;
+ u16 pci_command, new_command;
+ unsigned char pci_bus, pci_device_fn;
+
+#ifdef PCI_SUPPORT_VER2
+ struct pci_dev *pcidev = NULL;
+ while ((pcidev = pci_find_class(PCI_CLASS_NETWORK_ETHERNET << 8, pcidev))
+ != NULL) {
+ long pci_ioaddr = pcidev->base_address[0] & ~3;
+ int vendor = pcidev->vendor;
+ int device = pcidev->device;
+
+ for (chip_idx = 0; chip_tbl[chip_idx].vendor_id; chip_idx++)
+ if (vendor == chip_tbl[chip_idx].vendor_id
+ && (device & chip_tbl[chip_idx].device_id_mask) ==
+ chip_tbl[chip_idx].device_id)
+ break;
+ if (chip_tbl[chip_idx].vendor_id == 0 /* Compiled out! */
+ || check_region(pci_ioaddr, chip_tbl[chip_idx].io_size))
+ continue;
+ pci_bus = pcidev->bus->number;
+ pci_device_fn = pcidev->devfn;
+ irq = pcidev->irq;
+#else
+ int pci_index;
- if (pci_present()) {
- unsigned char pci_bus, pci_device_fn;
+ if ( ! pcibios_present())
+ return -ENODEV;
- for (;pci_index < 0xff; pci_index++) {
-#if LINUX_VERSION_CODE >= 0x20155
- unsigned int pci_irq_line;
- struct pci_dev *pdev;
-#else
- unsigned char pci_irq_line;
-#endif
- unsigned char pci_latency;
- unsigned short pci_command, vendor, device;
- unsigned int pci_ioaddr, chip_idx = 0;
-
- if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8,
-#ifdef REVERSE_PROBE_ORDER
- 0xff - pci_index,
-#else
- pci_index,
-#endif
- &pci_bus, &pci_device_fn)
- != PCIBIOS_SUCCESSFUL)
+ for (pci_index = 0; pci_index < 0xff; pci_index++) {
+ u8 pci_irq_line;
+ u16 vendor, device;
+ u32 pci_ioaddr;
+
+ if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8,
+ pci_index, &pci_bus, &pci_device_fn)
+ != PCIBIOS_SUCCESSFUL)
+ break;
+ pcibios_read_config_word(pci_bus, pci_device_fn,
+ PCI_VENDOR_ID, &vendor);
+ pcibios_read_config_word(pci_bus, pci_device_fn,
+ PCI_DEVICE_ID, &device);
+
+ for (chip_idx = 0; chip_tbl[chip_idx].vendor_id; chip_idx++)
+ if (vendor == chip_tbl[chip_idx].vendor_id
+ && (device & chip_tbl[chip_idx].device_id_mask) ==
+ chip_tbl[chip_idx].device_id)
break;
- pcibios_read_config_word(pci_bus, pci_device_fn,
- PCI_VENDOR_ID, &vendor);
- if (vendor != PCI_VENDOR_ID_SMC)
- continue;
+ if (chip_tbl[chip_idx].vendor_id == 0) /* Compiled out! */
+ continue;
- pcibios_read_config_word(pci_bus, pci_device_fn,
- PCI_DEVICE_ID, &device);
-#if LINUX_VERSION_CODE >= 0x20155
- pdev = pci_find_slot(pci_bus, pci_device_fn);
- pci_irq_line = pdev->irq;
- pci_ioaddr = pdev->base_address[0];
-#else
- pcibios_read_config_byte(pci_bus, pci_device_fn,
- PCI_INTERRUPT_LINE, &pci_irq_line);
- pcibios_read_config_dword(pci_bus, pci_device_fn,
- PCI_BASE_ADDRESS_0, &pci_ioaddr);
-#endif
- /* Remove I/O space marker in bit 0. */
- pci_ioaddr &= ~3;
-
- if (device != PCI_DEVICE_ID_SMC_EPIC100) {
- printk("Unknown SMC PCI ethernet chip type %4.4x detected:"
- " not configured.\n", device);
- continue;
- }
- if (epic_debug > 2)
- printk("Found SMC PCI EPIC/100 at I/O %#x, IRQ %d.\n",
- pci_ioaddr, pci_irq_line);
-
- if (check_region(pci_ioaddr, EPIC_TOTAL_SIZE))
- continue;
+ pcibios_read_config_dword(pci_bus, pci_device_fn,
+ PCI_BASE_ADDRESS_0, &pci_ioaddr);
+ pcibios_read_config_byte(pci_bus, pci_device_fn,
+ PCI_INTERRUPT_LINE, &pci_irq_line);
+ /* Remove I/O space marker in bit 0. */
+ pci_ioaddr &= ~3;
+ irq = pci_irq_line;
+
+ if (check_region(pci_ioaddr, chip_tbl[chip_idx].io_size))
+ continue;
+#endif
+
+ /* EPIC-specific code: Soft-reset the chip ere setting as master. */
+ outl(0x0001, pci_ioaddr + GENCTL);
+
+ /* Activate the card: fix for brain-damaged Win98 BIOSes. */
+ pcibios_read_config_word(pci_bus, pci_device_fn,
+ PCI_COMMAND, &pci_command);
+ new_command = pci_command | PCI_COMMAND_MASTER|PCI_COMMAND_IO;
+ if (pci_command != new_command) {
+ printk(KERN_INFO " The PCI BIOS has not enabled Ethernet"
+ " device %4.4x-%4.4x."
+ " Updating PCI command %4.4x->%4.4x.\n",
+ vendor, device, pci_command, new_command);
+ pcibios_write_config_word(pci_bus, pci_device_fn,
+ PCI_COMMAND, new_command);
+ }
-#ifdef MODULE
- dev = epic100_probe1(dev, pci_ioaddr, pci_irq_line, chip_idx,
- options[cards_found], cards_found);
-#else
- dev = epic100_probe1(dev, pci_ioaddr, pci_irq_line, chip_idx,
- dev ? dev->mem_start : 0, -1);
-#endif
+ dev = chip_tbl[chip_idx].probe1(pci_bus, pci_device_fn, dev, pci_ioaddr,
+ irq, chip_idx, cards_found);
- if (dev) {
- /* Get and check the bus-master and latency values. */
- pcibios_read_config_word(pci_bus, pci_device_fn,
- PCI_COMMAND, &pci_command);
- if ( ! (pci_command & PCI_COMMAND_MASTER)) {
- printk(" PCI Master Bit has not been set! Setting...\n");
- pci_command |= PCI_COMMAND_MASTER;
- pcibios_write_config_word(pci_bus, pci_device_fn,
- PCI_COMMAND, pci_command);
- }
- pcibios_read_config_byte(pci_bus, pci_device_fn,
- PCI_LATENCY_TIMER, &pci_latency);
- if (pci_latency < 10) {
- printk(" PCI latency timer (CFLT) is unreasonably low at %d."
- " Setting to 255 clocks.\n", pci_latency);
+ /* Check the latency timer. */
+ if (dev) {
+ u8 pci_latency;
+ pcibios_read_config_byte(pci_bus, pci_device_fn,
+ PCI_LATENCY_TIMER, &pci_latency);
+ if (pci_latency < chip_tbl[chip_idx].min_latency) {
+ printk(KERN_INFO " PCI latency timer (CFLT) value of %d is "
+ "unreasonably low, setting to %d.\n", pci_latency,
+ chip_tbl[chip_idx].min_latency);
pcibios_write_config_byte(pci_bus, pci_device_fn,
- PCI_LATENCY_TIMER, 255);
- } else if (epic_debug > 1)
- printk(" PCI latency timer (CFLT) is %#x.\n", pci_latency);
- dev = 0;
- cards_found++;
+ PCI_LATENCY_TIMER,
+ chip_tbl[chip_idx].min_latency);
}
+ dev = 0;
+ cards_found++;
}
}
-#if defined (MODULE)
- return cards_found;
-#else
return cards_found ? 0 : -ENODEV;
-#endif
}
+#endif /* not CARDBUS */
-static struct device *epic100_probe1(struct device *dev, int ioaddr, int irq,
- int chip_id, int options, int card_idx)
+static struct device *epic_probe1(int pci_bus, int pci_devfn,
+ struct device *dev, long ioaddr, int irq,
+ int chip_idx, int card_idx)
{
- static int did_version = 0; /* Already printed version info. */
- struct epic_private *tp;
- int i;
+ struct epic_private *ep;
+ int i, option = 0, duplex = 0;
- if (epic_debug > 0 && did_version++ == 0)
- printk(version);
+ if (dev && dev->mem_start) {
+ option = dev->mem_start;
+ duplex = (dev->mem_start & 16) ? 1 : 0;
+ } else if (card_idx >= 0 && card_idx < MAX_UNITS) {
+ if (options[card_idx] >= 0)
+ option = options[card_idx];
+ if (full_duplex[card_idx] >= 0)
+ duplex = full_duplex[card_idx];
+ }
dev = init_etherdev(dev, 0);
- printk("%s: SMC EPIC/100 at %#3x, IRQ %d, ", dev->name, ioaddr, irq);
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ printk(KERN_INFO "%s: SMC EPIC/100 at %#lx, IRQ %d, ",
+ dev->name, ioaddr, dev->irq);
/* Bring the chip out of low-power mode. */
- outl(0x0200, ioaddr + GENCTL);
+ outl(0x4200, ioaddr + GENCTL);
/* Magic?! If we don't set this bit the MII interface won't work. */
outl(0x0008, ioaddr + TEST1);
+ /* Turn on the MII transceiver. */
+ outl(0x12, ioaddr + MIICfg);
+ if (chip_idx == 1)
+ outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+ outl(0x0200, ioaddr + GENCTL);
+
/* This could also be read from the EEPROM. */
for (i = 0; i < 3; i++)
((u16 *)dev->dev_addr)[i] = inw(ioaddr + LAN0 + i*4);
@@ -416,65 +427,68 @@
printk("%2.2x.\n", dev->dev_addr[i]);
if (epic_debug > 1) {
- printk("%s: EEPROM contents\n", dev->name);
- for (i = 0; i < 64; i++)
- printk(" %4.4x%s", read_eeprom(ioaddr, i), i % 16 == 15 ? "\n" : "");
+ printk(KERN_DEBUG "%s: EEPROM contents\n", dev->name);
+ for (i = 0; i < 64; i++)
+ printk(" %4.4x%s", read_eeprom(ioaddr, i),
+ i % 16 == 15 ? "\n" : "");
}
/* We do a request_region() to register /proc/ioports info. */
- request_region(ioaddr, EPIC_TOTAL_SIZE, "SMC EPIC/100");
-
- dev->base_addr = ioaddr;
- dev->irq = irq;
+ request_region(ioaddr, EPIC_TOTAL_SIZE, dev->name);
/* The data structures must be quadword aligned. */
- tp = kmalloc(sizeof(*tp), GFP_KERNEL | GFP_DMA);
- memset(tp, 0, sizeof(*tp));
- dev->priv = tp;
+ ep = kmalloc(sizeof(*ep), GFP_KERNEL | GFP_DMA);
+ memset(ep, 0, sizeof(*ep));
+ dev->priv = ep;
-#ifdef MODULE
- tp->next_module = root_epic_dev;
+ ep->next_module = root_epic_dev;
root_epic_dev = dev;
-#endif
- tp->chip_id = chip_id;
+ ep->pci_bus = pci_bus;
+ ep->pci_dev_fn = pci_devfn;
+#if defined(PCI_SUPPORT_VER2)
+ ep->chip_id = pci_find_slot(pci_bus, pci_devfn)->device;
+#else
+ ep->chip_id = chip_tbl[chip_idx].device_id;
+#endif
/* Find the connected MII xcvrs.
Doing this in open() would allow detecting external xcvrs later, but
takes too much time. */
{
int phy, phy_idx;
- for (phy = 0, phy_idx = 0; phy < 32 && phy_idx < sizeof(tp->phys);
+ for (phy = 1, phy_idx = 0; phy < 32 && phy_idx < sizeof(ep->phys);
phy++) {
- int mii_status = mii_read(ioaddr, phy, 0);
+ int mii_status = mdio_read(ioaddr, phy, 1);
if (mii_status != 0xffff && mii_status != 0x0000) {
- tp->phys[phy_idx++] = phy;
- printk("%s: MII transceiver found at address %d.\n",
- dev->name, phy);
+ ep->phys[phy_idx++] = phy;
+ printk(KERN_INFO "%s: MII transceiver #%d control "
+ "%4.4x status %4.4x.\n"
+ KERN_INFO "%s: Autonegotiation advertising %4.4x "
+ "link partner %4.4x.\n",
+ dev->name, phy, mdio_read(ioaddr, phy, 0), mii_status,
+ dev->name, mdio_read(ioaddr, phy, 4),
+ mdio_read(ioaddr, phy, 5));
}
}
if (phy_idx == 0) {
- printk("%s: ***WARNING***: No MII transceiver found!\n",
+ printk(KERN_WARNING "%s: ***WARNING***: No MII transceiver found!\n",
dev->name);
/* Use the known PHY address of the EPII. */
- tp->phys[0] = 3;
+ ep->phys[0] = 3;
}
}
- /* Leave the chip in low-power mode. */
+ /* Turn off the MII xcvr (175 only!), leave the chip in low-power mode. */
+ if (ep->chip_id == 6)
+ outl(inl(ioaddr + NVCTL) & ~0x483C, ioaddr + NVCTL);
outl(0x0008, ioaddr + GENCTL);
/* The lower four bits are the media type. */
- if (options > 0) {
- tp->full_duplex = (options & 16) ? 1 : 0;
- tp->default_port = options & 15;
- if (tp->default_port)
- tp->medialock = 1;
- }
- if (card_idx >= 0) {
- if (full_duplex[card_idx] >= 0)
- tp->full_duplex = full_duplex[card_idx];
- }
+ ep->force_fd = duplex;
+ ep->default_port = option;
+ if (ep->default_port)
+ ep->medialock = 1;
/* The Epic-specific entries in the device structure. */
dev->open = &epic_open;
@@ -482,6 +496,7 @@
dev->stop = &epic_close;
dev->get_stats = &epic_get_stats;
dev->set_multicast_list = &set_rx_mode;
+ dev->do_ioctl = &mii_ioctl;
return dev;
}
@@ -498,41 +513,42 @@
#define EE_ENB (0x0001 | EE_CS)
/* Delay between EEPROM clock transitions.
- The 1.2 code is a "nasty" timing loop, but PC compatible machines are
- *supposed* to delay an ISA-compatible period for the SLOW_DOWN_IO macro. */
+ No extra delay is needed with 33Mhz PCI, but 66Mhz is untested.
+ */
+
#ifdef _LINUX_DELAY_H
-#define eeprom_delay(nanosec) udelay((nanosec + 999)/1000)
+#define eeprom_delay(nanosec) udelay(1)
#else
-#define eeprom_delay(nanosec) do { int _i = 3; while (--_i > 0) { __SLOW_DOWN_IO; }} while (0)
+#define eeprom_delay(nanosec) do { ; } while (0)
#endif
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD (5 << 6)
-#define EE_READ_CMD (6 << 6)
+#define EE_READ64_CMD (6 << 6)
+#define EE_READ256_CMD (6 << 8)
#define EE_ERASE_CMD (7 << 6)
-static int read_eeprom(int ioaddr, int location)
+static int read_eeprom(long ioaddr, int location)
{
int i;
int retval = 0;
- int ee_addr = ioaddr + EECTL;
- int read_cmd = location | EE_READ_CMD;
-
+ long ee_addr = ioaddr + EECTL;
+ int read_cmd = location |
+ (inl(ee_addr) & 0x40) ? EE_READ64_CMD : EE_READ256_CMD;
+
outl(EE_ENB & ~EE_CS, ee_addr);
outl(EE_ENB, ee_addr);
-
+
/* Shift the read command bits out. */
- for (i = 10; i >= 0; i--) {
- short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ for (i = 12; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_WRITE_1 : EE_WRITE_0;
outl(EE_ENB | dataval, ee_addr);
eeprom_delay(100);
outl(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
eeprom_delay(150);
- outl(EE_ENB | dataval, ee_addr); /* Finish EEPROM a clock tick. */
- eeprom_delay(250);
}
outl(EE_ENB, ee_addr);
-
+
for (i = 16; i > 0; i--) {
outl(EE_ENB | EE_SHIFT_CLK, ee_addr);
eeprom_delay(100);
@@ -548,7 +564,7 @@
#define MII_READOP 1
#define MII_WRITEOP 2
-static int mii_read(int ioaddr, int phy_id, int location)
+static int mdio_read(long ioaddr, int phy_id, int location)
{
int i;
@@ -556,66 +572,82 @@
/* Typical operation takes < 50 ticks. */
for (i = 4000; i > 0; i--)
if ((inl(ioaddr + MIICtrl) & MII_READOP) == 0)
+ return inw(ioaddr + MIIData);
+ return 0xffff;
+}
+
+static void mdio_write(long ioaddr, int phy_id, int location, int value)
+{
+ int i;
+
+ outw(value, ioaddr + MIIData);
+ outl((phy_id << 9) | (location << 4) | MII_WRITEOP, ioaddr + MIICtrl);
+ for (i = 10000; i > 0; i--) {
+ if ((inl(ioaddr + MIICtrl) & MII_WRITEOP) == 0)
break;
- return inw(ioaddr + MIIData);
+ }
+ return;
}
static int
epic_open(struct device *dev)
{
- struct epic_private *tp = (struct epic_private *)dev->priv;
- int ioaddr = dev->base_addr;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
+ long ioaddr = dev->base_addr;
int i;
int mii_reg5;
- int full_duplex = 0;
+ ep->full_duplex = ep->force_fd;
/* Soft reset the chip. */
- outl(0x0001, ioaddr + GENCTL);
+ outl(0x4001, ioaddr + GENCTL);
-#ifdef SA_SHIRQ
- if (request_irq(dev->irq, &epic_interrupt, SA_SHIRQ,
- "SMC EPIC/100", dev)) {
- return -EAGAIN;
- }
-#else
- if (irq2dev_map[dev->irq] != NULL
- || (irq2dev_map[dev->irq] = dev) == NULL
- || dev->irq == 0
- || request_irq(dev->irq, &epic_interrupt, 0, "SMC EPIC/100")) {
+ if (request_irq(dev->irq, &epic_interrupt, SA_SHIRQ, "SMC EPIC/100", dev))
return -EAGAIN;
- }
-#endif
MOD_INC_USE_COUNT;
epic_init_ring(dev);
- /* This next line by Ken Yamaguchi.. ?? */
- outl(0x8, ioaddr + 0x1c);
+ outl(0x4000, ioaddr + GENCTL);
+ /* This next magic! line by Ken Yamaguchi.. ?? */
+ outl(0x0008, ioaddr + TEST1);
+
+ /* Pull the chip out of low-power mode, enable interrupts, and set for
+ PCI read multiple. The MIIcfg setting and strange write order are
+ required by the details of which bits are reset and the transceiver
+ wiring on the Ositech CardBus card.
+ */
+ outl(0x12, ioaddr + MIICfg);
+ if (ep->chip_id == 6)
+ outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
- /* Pull the chip out of low-power mode, enable interrupts, and set for PCI read multiple. */
+#if defined(__powerpc__) || defined(__sparc__) /* Big endian */
+ outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+#else
outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+#endif
for (i = 0; i < 3; i++)
outl(((u16*)dev->dev_addr)[i], ioaddr + LAN0 + i*4);
outl(TX_FIFO_THRESH, ioaddr + TxThresh);
- full_duplex = tp->full_duplex;
- mii_reg5 = mii_read(ioaddr, tp->phys[0], 5);
- if (mii_reg5 != 0xffff && (mii_reg5 & 0x0100)) {
- full_duplex = 1;
+ mii_reg5 = mdio_read(ioaddr, ep->phys[0], 5);
+ if (mii_reg5 != 0xffff) {
+ if ((mii_reg5 & 0x0100) || (mii_reg5 & 0x01C0) == 0x0040)
+ ep->full_duplex = 1;
+ else if (! (mii_reg5 & 0x4000))
+ mdio_write(ioaddr, ep->phys[0], 0, 0x1200);
if (epic_debug > 1)
- printk("%s: Setting %s-duplex based on MII xcvr %d"
+ printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d"
" register read of %4.4x.\n", dev->name,
- full_duplex ? "full" : "half", tp->phys[0],
- mii_read(ioaddr, tp->phys[0], 5));
+ ep->full_duplex ? "full" : "half", ep->phys[0], mii_reg5);
}
- outl(full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
- outl(virt_to_bus(tp->rx_ring), ioaddr + PRxCDAR);
- outl(virt_to_bus(tp->tx_ring), ioaddr + PTxCDAR);
+ outl(ep->full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
+ outl(virt_to_bus(ep->rx_ring), ioaddr + PRxCDAR);
+ outl(virt_to_bus(ep->tx_ring), ioaddr + PTxCDAR);
/* Start the chip's Rx process. */
set_rx_mode(dev);
@@ -626,67 +658,160 @@
dev->start = 1;
/* Enable interrupts by setting the interrupt mask. */
- outl(CntFull | TxUnderrun | TxDone
+ outl((ep->chip_id == 6 ? PCIBusErr175 : PCIBusErr170)
+ | CntFull | TxUnderrun | TxDone
| RxError | RxOverflow | RxFull | RxHeader | RxDone,
ioaddr + INTMASK);
if (epic_debug > 1)
- printk("%s: epic_open() ioaddr %4.4x IRQ %d status %4.4x %s-duplex.\n",
+ printk(KERN_DEBUG "%s: epic_open() ioaddr %lx IRQ %d status %4.4x "
+ "%s-duplex.\n",
dev->name, ioaddr, dev->irq, inl(ioaddr + GENCTL),
- full_duplex ? "full" : "half");
+ ep->full_duplex ? "full" : "half");
/* Set the timer to switch to check for link beat and perhaps switch
to an alternate media type. */
- init_timer(&tp->timer);
- tp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */
- tp->timer.data = (unsigned long)dev;
- tp->timer.function = &epic_timer; /* timer handler */
- add_timer(&tp->timer);
+ init_timer(&ep->timer);
+ ep->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */
+ ep->timer.data = (unsigned long)dev;
+ ep->timer.function = &epic_timer; /* timer handler */
+ add_timer(&ep->timer);
return 0;
}
+/* Reset the chip to recover from a PCI transaction error.
+ This may occur at interrupt time. */
+static void epic_pause(struct device *dev)
+{
+ long ioaddr = dev->base_addr;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ outl(0x00000000, ioaddr + INTMASK);
+ /* Stop the chip's Tx and Rx DMA processes. */
+ outw(0x0061, ioaddr + COMMAND);
+
+ /* Update the error counts. */
+ if (inw(ioaddr + COMMAND) != 0xffff) {
+ ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
+ ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
+ ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
+ }
+
+ /* Remove the packets on the Rx queue. */
+ epic_rx(dev);
+}
+
+static void epic_restart(struct device *dev)
+{
+ long ioaddr = dev->base_addr;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
+ int i;
+
+ printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
+ dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
+ /* Soft reset the chip. */
+ outl(0x0001, ioaddr + GENCTL);
+
+ udelay(1);
+ /* Duplicate code from epic_open(). */
+ outl(0x0008, ioaddr + TEST1);
+
+#if defined(__powerpc__) /* Big endian */
+ outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+#else
+ outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
+#endif
+ outl(0x12, ioaddr + MIICfg);
+ if (ep->chip_id == 6)
+ outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+
+ for (i = 0; i < 3; i++)
+ outl(((u16*)dev->dev_addr)[i], ioaddr + LAN0 + i*4);
+
+ outl(TX_FIFO_THRESH, ioaddr + TxThresh);
+ outl(ep->full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
+ outl(virt_to_bus(&ep->rx_ring[ep->cur_rx%RX_RING_SIZE]), ioaddr + PRxCDAR);
+ outl(virt_to_bus(&ep->tx_ring[ep->dirty_tx%TX_RING_SIZE]),
+ ioaddr + PTxCDAR);
+
+ /* Start the chip's Rx process. */
+ set_rx_mode(dev);
+ outl(0x000A, ioaddr + COMMAND);
+
+ /* Enable interrupts by setting the interrupt mask. */
+ outl((ep->chip_id == 6 ? PCIBusErr175 : PCIBusErr170)
+ | CntFull | TxUnderrun | TxDone
+ | RxError | RxOverflow | RxFull | RxHeader | RxDone,
+ ioaddr + INTMASK);
+ printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
+ " interrupt %4.4x.\n",
+ dev->name, inl(ioaddr + COMMAND), inl(ioaddr + GENCTL),
+ inl(ioaddr + INTSTAT));
+ return;
+}
+
static void epic_timer(unsigned long data)
{
struct device *dev = (struct device *)data;
- struct epic_private *tp = (struct epic_private *)dev->priv;
- int ioaddr = dev->base_addr;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
+ long ioaddr = dev->base_addr;
int next_tick = 0;
+ int mii_reg5 = mdio_read(ioaddr, ep->phys[0], 5);
if (epic_debug > 3) {
- printk("%s: Media selection tick, Tx status %8.8x.\n",
+ printk(KERN_DEBUG "%s: Media selection tick, Tx status %8.8x.\n",
dev->name, inl(ioaddr + TxSTAT));
- printk("%s: Other registers are IntMask %4.4x IntStatus %4.4x RxStatus"
- " %4.4x.\n",
+ printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x "
+ "IntStatus %4.4x RxStatus %4.4x.\n",
dev->name, inl(ioaddr + INTMASK), inl(ioaddr + INTSTAT),
inl(ioaddr + RxSTAT));
}
+ if (! ep->force_fd && mii_reg5 != 0xffff) {
+ int duplex = (mii_reg5&0x0100) || (mii_reg5 & 0x01C0) == 0x0040;
+ if (ep->full_duplex != duplex) {
+ ep->full_duplex = duplex;
+ printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link"
+ " partner capability of %4.4x.\n", dev->name,
+ ep->full_duplex ? "full" : "half", ep->phys[0], mii_reg5);
+ outl(ep->full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
+ }
+ next_tick = 60*HZ;
+ }
if (next_tick) {
- tp->timer.expires = RUN_AT(next_tick);
- add_timer(&tp->timer);
+ ep->timer.expires = RUN_AT(next_tick);
+ add_timer(&ep->timer);
}
}
static void epic_tx_timeout(struct device *dev)
{
- struct epic_private *tp = (struct epic_private *)dev->priv;
- int ioaddr = dev->base_addr;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
+ long ioaddr = dev->base_addr;
if (epic_debug > 0) {
- printk("%s: Transmit timeout using MII device, Tx status %4.4x.\n",
+ printk(KERN_WARNING "%s: Transmit timeout using MII device, "
+ "Tx status %4.4x.\n",
dev->name, inw(ioaddr + TxSTAT));
if (epic_debug > 1) {
- printk("%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
- dev->name, tp->dirty_tx, tp->cur_tx);
+ printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
+ dev->name, ep->dirty_tx, ep->cur_tx);
}
}
+ if (inw(ioaddr + TxSTAT) & 0x10) { /* Tx FIFO underflow. */
+ ep->stats.tx_fifo_errors++;
+ /* Restart the transmit process. */
+ outl(0x0080, ioaddr + COMMAND);
+ }
+
/* Perhaps stop and restart the chip's Tx processes . */
/* Trigger a transmit demand. */
outl(0x0004, dev->base_addr + COMMAND);
dev->trans_start = jiffies;
- tp->stats.tx_errors++;
+ ep->stats.tx_errors++;
return;
}
@@ -694,66 +819,51 @@
static void
epic_init_ring(struct device *dev)
{
- struct epic_private *tp = (struct epic_private *)dev->priv;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
int i;
- tp->tx_full = 0;
- tp->cur_rx = tp->cur_tx = 0;
- tp->dirty_rx = tp->dirty_tx = 0;
+ ep->tx_full = 0;
+ ep->cur_rx = ep->cur_tx = 0;
+ ep->dirty_rx = ep->dirty_tx = 0;
for (i = 0; i < RX_RING_SIZE; i++) {
- tp->rx_ring[i].status = 0x8000; /* Owned by Epic chip */
- tp->rx_ring[i].buflength = PKT_BUF_SZ;
+ ep->rx_ring[i].status = 0x8000; /* Owned by Epic chip */
+ ep->rx_ring[i].buflength = PKT_BUF_SZ;
{
/* Note the receive buffer must be longword aligned.
dev_alloc_skb() provides 16 byte alignment. But do *not*
use skb_reserve() to align the IP header! */
struct sk_buff *skb;
- skb = DEV_ALLOC_SKB(PKT_BUF_SZ);
- tp->rx_skbuff[i] = skb;
+ skb = dev_alloc_skb(PKT_BUF_SZ);
+ ep->rx_skbuff[i] = skb;
if (skb == NULL)
break; /* Bad news! */
skb->dev = dev; /* Mark as being used by this device. */
-#if LINUX_VERSION_CODE > 0x10300
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
- tp->rx_ring[i].bufaddr = virt_to_bus(skb->tail);
-#else
- tp->rx_ring[i].bufaddr = virt_to_bus(skb->data);
-#endif
+ ep->rx_ring[i].bufaddr = virt_to_bus(skb->tail);
}
- tp->rx_ring[i].next = virt_to_bus(&tp->rx_ring[i+1]);
+ ep->rx_ring[i].next = virt_to_bus(&ep->rx_ring[i+1]);
}
/* Mark the last entry as wrapping the ring. */
- tp->rx_ring[i-1].next = virt_to_bus(&tp->rx_ring[0]);
+ ep->rx_ring[i-1].next = virt_to_bus(&ep->rx_ring[0]);
/* The Tx buffer descriptor is filled in as needed, but we
do need to clear the ownership bit. */
for (i = 0; i < TX_RING_SIZE; i++) {
- tp->tx_skbuff[i] = 0;
- tp->tx_ring[i].status = 0x0000;
- tp->tx_ring[i].next = virt_to_bus(&tp->tx_ring[i+1]);
+ ep->tx_skbuff[i] = 0;
+ ep->tx_ring[i].status = 0x0000;
+ ep->tx_ring[i].next = virt_to_bus(&ep->tx_ring[i+1]);
}
- tp->tx_ring[i-1].next = virt_to_bus(&tp->tx_ring[0]);
+ ep->tx_ring[i-1].next = virt_to_bus(&ep->tx_ring[0]);
}
static int
epic_start_xmit(struct sk_buff *skb, struct device *dev)
{
- struct epic_private *tp = (struct epic_private *)dev->priv;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
int entry;
u32 flag;
-#ifndef final_version
- if (skb == NULL || skb->len <= 0) {
- printk("%s: Obsolete driver layer request made: skbuff==NULL.\n",
- dev->name);
-#if 0
- dev_tint(dev);
-#endif
- return 0;
- }
-#endif
-
/* Block a timer-based transmit from overlapping. This could better be
done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
@@ -767,37 +877,37 @@
with the "ownership" bits last. */
/* Calculate the next Tx descriptor entry. */
- entry = tp->cur_tx % TX_RING_SIZE;
+ entry = ep->cur_tx % TX_RING_SIZE;
- tp->tx_skbuff[entry] = skb;
- tp->tx_ring[entry].txlength = (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN);
- tp->tx_ring[entry].bufaddr = virt_to_bus(skb->data);
- tp->tx_ring[entry].buflength = skb->len;
+ ep->tx_skbuff[entry] = skb;
+ ep->tx_ring[entry].txlength = (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN);
+ ep->tx_ring[entry].bufaddr = virt_to_bus(skb->data);
+ ep->tx_ring[entry].buflength = skb->len;
- if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
+ if (ep->cur_tx - ep->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
flag = 0x10; /* No interrupt */
- dev->tbusy = 0;
- } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) {
+ clear_bit(0, (void*)&dev->tbusy);
+ } else if (ep->cur_tx - ep->dirty_tx == TX_RING_SIZE/2) {
flag = 0x14; /* Tx-done intr. */
- dev->tbusy = 0;
- } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) {
+ clear_bit(0, (void*)&dev->tbusy);
+ } else if (ep->cur_tx - ep->dirty_tx < TX_RING_SIZE - 2) {
flag = 0x10; /* No Tx-done intr. */
- dev->tbusy = 0;
+ clear_bit(0, (void*)&dev->tbusy);
} else {
/* Leave room for two additional entries. */
flag = 0x14; /* Tx-done intr. */
- tp->tx_full = 1;
+ ep->tx_full = 1;
}
- tp->tx_ring[entry].control = flag;
- tp->tx_ring[entry].status = 0x8000; /* Pass ownership to the chip. */
- tp->cur_tx++;
+ ep->tx_ring[entry].control = flag;
+ ep->tx_ring[entry].status = 0x8000; /* Pass ownership to the chip. */
+ ep->cur_tx++;
/* Trigger an immediate transmit demand. */
outl(0x0004, dev->base_addr + COMMAND);
dev->trans_start = jiffies;
if (epic_debug > 4)
- printk("%s: Queued Tx packet size %d to slot %d, "
+ printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, "
"flag %2.2x Tx status %8.8x.\n",
dev->name, (int)skb->len, entry, flag,
inl(dev->base_addr + TxSTAT));
@@ -807,27 +917,28 @@
/* The interrupt handler does all of the Rx thread work and cleans up
after the Tx thread. */
-static void epic_interrupt IRQ(int irq, void *dev_instance, struct pt_regs *regs)
+static void epic_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
{
-#ifdef SA_SHIRQ
struct device *dev = (struct device *)dev_instance;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int status, boguscnt = max_interrupt_work;
+
+#if defined(__i386__)
+ /* A lock to prevent simultaneous entry bug on Intel SMP machines. */
+ if (test_and_set_bit(0, (void*)&dev->interrupt)) {
+ printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n",
+ dev->name);
+ dev->interrupt = 0; /* Avoid halting machine. */
+ return;
+ }
#else
- struct device *dev = (struct device *)(irq2dev_map[irq]);
-#endif
- struct epic_private *lp;
- int status, ioaddr, boguscnt = max_interrupt_work;
-
- if (dev == NULL) {
- printk ("epic_interrupt(): irq %d for unknown device.\n", irq);
+ if (dev->interrupt) {
+ printk(KERN_ERR "%s: Re-entering the interrupt handler.\n", dev->name);
return;
}
-
- ioaddr = dev->base_addr;
- lp = (struct epic_private *)dev->priv;
- if (dev->interrupt)
- printk("%s: Re-entering the interrupt handler.\n", dev->name);
-
dev->interrupt = 1;
+#endif
do {
status = inl(ioaddr + INTSTAT);
@@ -838,18 +949,18 @@
printk("%s: interrupt interrupt=%#8.8x new intstat=%#8.8x.\n",
dev->name, status, inl(ioaddr + INTSTAT));
- if ((status & (RxDone | TxEmpty | TxDone)) == 0)
+ if ((status & IntrSummary) == 0)
break;
- if (status & RxDone) /* Rx interrupt */
+ if (status & (RxDone | RxStarted | RxEarlyWarn))
epic_rx(dev);
if (status & (TxEmpty | TxDone)) {
int dirty_tx;
- for (dirty_tx = lp->dirty_tx; dirty_tx < lp->cur_tx; dirty_tx++) {
+ for (dirty_tx = ep->dirty_tx; dirty_tx < ep->cur_tx; dirty_tx++) {
int entry = dirty_tx % TX_RING_SIZE;
- int txstatus = lp->tx_ring[entry].status;
+ int txstatus = ep->tx_ring[entry].status;
if (txstatus < 0)
break; /* It still hasn't been Txed */
@@ -861,66 +972,77 @@
printk("%s: Transmit error, Tx status %8.8x.\n",
dev->name, txstatus);
#endif
- lp->stats.tx_errors++;
- if (txstatus & 0x1050) lp->stats.tx_aborted_errors++;
- if (txstatus & 0x0008) lp->stats.tx_carrier_errors++;
- if (txstatus & 0x0040) lp->stats.tx_window_errors++;
- if (txstatus & 0x0010) lp->stats.tx_fifo_errors++;
+ ep->stats.tx_errors++;
+ if (txstatus & 0x1050) ep->stats.tx_aborted_errors++;
+ if (txstatus & 0x0008) ep->stats.tx_carrier_errors++;
+ if (txstatus & 0x0040) ep->stats.tx_window_errors++;
+ if (txstatus & 0x0010) ep->stats.tx_fifo_errors++;
#ifdef ETHER_STATS
- if (txstatus & 0x1000) lp->stats.collisions16++;
+ if (txstatus & 0x1000) ep->stats.collisions16++;
#endif
} else {
#ifdef ETHER_STATS
- if ((txstatus & 0x0002) != 0) lp->stats.tx_deferred++;
+ if ((txstatus & 0x0002) != 0) ep->stats.tx_deferred++;
#endif
- lp->stats.collisions += (txstatus >> 8) & 15;
- lp->stats.tx_packets++;
+ ep->stats.collisions += (txstatus >> 8) & 15;
+ ep->stats.tx_packets++;
}
/* Free the original skb. */
- dev_kfree_skb(lp->tx_skbuff[entry]);
- lp->tx_skbuff[entry] = 0;
+ DEV_FREE_SKB(ep->tx_skbuff[entry]);
+ ep->tx_skbuff[entry] = 0;
}
#ifndef final_version
- if (lp->cur_tx - dirty_tx > TX_RING_SIZE) {
+ if (ep->cur_tx - dirty_tx > TX_RING_SIZE) {
printk("%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
- dev->name, dirty_tx, lp->cur_tx, lp->tx_full);
+ dev->name, dirty_tx, ep->cur_tx, ep->tx_full);
dirty_tx += TX_RING_SIZE;
}
#endif
- if (lp->tx_full && dev->tbusy
- && dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) {
+ if (ep->tx_full && dev->tbusy
+ && dirty_tx > ep->cur_tx - TX_RING_SIZE + 2) {
/* The ring is no longer full, clear tbusy. */
- lp->tx_full = 0;
- dev->tbusy = 0;
+ ep->tx_full = 0;
+ clear_bit(0, (void*)&dev->tbusy);
mark_bh(NET_BH);
}
- lp->dirty_tx = dirty_tx;
+ ep->dirty_tx = dirty_tx;
}
/* Check uncommon events all at once. */
- if (status & (CntFull | TxUnderrun | RxOverflow)) {
+ if (status & (CntFull | TxUnderrun | RxOverflow |
+ PCIBusErr170 | PCIBusErr175)) {
+ if (status == 0xffffffff) /* Chip failed or removed (CardBus). */
+ break;
/* Always update the error counts to avoid overhead later. */
- lp->stats.rx_missed_errors += inb(ioaddr + MPCNT);
- lp->stats.rx_frame_errors += inb(ioaddr + ALICNT);
- lp->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
+ ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
+ ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
+ ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
if (status & TxUnderrun) { /* Tx FIFO underflow. */
- lp->stats.tx_fifo_errors++;
- /* Restart the transmit process. */
- outl(0x0080, ioaddr + COMMAND);
+ ep->stats.tx_fifo_errors++;
+ outl(1536, ioaddr + TxThresh);
+ /* Restart the transmit process. */
+ outl(0x0080, ioaddr + COMMAND);
}
if (status & RxOverflow) { /* Missed a Rx frame. */
- lp->stats.rx_errors++;
+ ep->stats.rx_errors++;
+ }
+ if (status & PCIBusErr170) {
+ printk(KERN_ERR "%s: PCI Bus Error! EPIC status %4.4x.\n",
+ dev->name, status);
+ epic_pause(dev);
+ epic_restart(dev);
}
/* Clear all error sources. */
outl(status & 0x7f18, ioaddr + INTSTAT);
}
if (--boguscnt < 0) {
- printk("%s: Too much work at interrupt, IntrStatus=0x%8.8x.\n",
+ printk(KERN_ERR "%s: Too much work at interrupt, "
+ "IntrStatus=0x%8.8x.\n",
dev->name, status);
/* Clear all interrupt sources. */
outl(0x0001ffff, ioaddr + INTSTAT);
@@ -929,133 +1051,101 @@
} while (1);
if (epic_debug > 3)
- printk("%s: exiting interrupt, intr_status=%#4.4x.\n",
+ printk(KERN_DEBUG "%s: exiting interrupt, intr_status=%#4.4x.\n",
dev->name, inl(ioaddr + INTSTAT));
- /* Code that should never be run! Perhaps remove after testing.. */
- {
- static int stopit = 10;
- if (dev->start == 0 && --stopit < 0) {
- printk("%s: Emergency stop, looping startup interrupt.\n",
- dev->name);
- FREE_IRQ(irq, dev);
- }
- }
-
+#if defined(__i386__)
+ clear_bit(0, (void*)&dev->interrupt);
+#else
dev->interrupt = 0;
+#endif
return;
}
-static int
-epic_rx(struct device *dev)
+static int epic_rx(struct device *dev)
{
- struct epic_private *lp = (struct epic_private *)dev->priv;
- int entry = lp->cur_rx % RX_RING_SIZE;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
+ int entry = ep->cur_rx % RX_RING_SIZE;
+ int work_done = 0;
if (epic_debug > 4)
- printk(" In epic_rx(), entry %d %8.8x.\n", entry,
- lp->rx_ring[entry].status);
+ printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry,
+ ep->rx_ring[entry].status);
/* If we own the next entry, it's a new packet. Send it up. */
- while (lp->rx_ring[entry].status >= 0) {
- int status = lp->rx_ring[entry].status;
+ while (ep->rx_ring[entry].status >= 0 && ep->rx_skbuff[entry]) {
+ int status = ep->rx_ring[entry].status;
if (epic_debug > 4)
- printk(" epic_rx() status was %8.8x.\n", status);
- if (status & 0x2000) {
- printk("%s: Oversized Ethernet frame spanned multiple buffers,"
- " status %4.4x!\n", dev->name, status);
- lp->stats.rx_length_errors++;
- } else if (status & 0x0006) {
- /* Rx Frame errors are counted in hardware. */
- lp->stats.rx_errors++;
+ printk(KERN_DEBUG " epic_rx() status was %8.8x.\n", status);
+ if (status & 0x2006) {
+ if (status & 0x2000) {
+ printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
+ "multiple buffers, status %4.4x!\n", dev->name, status);
+ ep->stats.rx_length_errors++;
+ } else if (status & 0x0006)
+ /* Rx Frame errors are counted in hardware. */
+ ep->stats.rx_errors++;
} else {
/* Malloc up new buffer, compatible with net-2e. */
/* Omit the four octet CRC from the length. */
- short pkt_len = lp->rx_ring[entry].rxlength - 4;
+ short pkt_len = ep->rx_ring[entry].rxlength - 4;
struct sk_buff *skb;
- int rx_in_place = 0;
- /* Check if the packet is long enough to just accept without
- copying to a properly sized skbuff. */
- if (pkt_len > rx_copybreak) {
- struct sk_buff *newskb;
- char *temp;
-
- /* Pass up the skb already on the Rx ring. */
- skb = lp->rx_skbuff[entry];
- temp = skb_put(skb, pkt_len);
- if (bus_to_virt(lp->rx_ring[entry].bufaddr) != temp)
- printk("%s: Warning -- the skbuff addresses do not match"
- " in epic_rx: %p vs. %p / %p.\n", dev->name,
- bus_to_virt(lp->rx_ring[entry].bufaddr),
- skb->head, temp);
- /* Get a fresh skbuff to replace the filled one. */
- newskb = DEV_ALLOC_SKB(PKT_BUF_SZ);
- if (newskb) {
- rx_in_place = 1;
- lp->rx_skbuff[entry] = newskb;
- newskb->dev = dev;
-#if LINUX_VERSION_CODE > 0x10300
- /* Align IP on 16 byte boundaries */
- skb_reserve(newskb, 2);
- lp->rx_ring[entry].bufaddr = virt_to_bus(newskb->tail);
+ /* Check if the packet is long enough to accept without copying
+ to a minimally-sized skbuff. */
+ if (pkt_len < rx_copybreak
+ && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16 byte align the IP header */
+#if 1 /* USE_IP_COPYSUM */
+ eth_copy_and_sum(skb, bus_to_virt(ep->rx_ring[entry].bufaddr),
+ pkt_len, 0);
+ skb_put(skb, pkt_len);
#else
- lp->rx_ring[entry].bufaddr = virt_to_bus(newskb->data);
-#endif
- } else /* No memory, drop the packet. */
- skb = 0;
- } else
- skb = DEV_ALLOC_SKB(pkt_len + 2);
- if (skb == NULL) {
- int i;
- printk("%s: Memory squeeze, deferring packet.\n", dev->name);
- /* Check that at least two ring entries are free.
- If not, free one and mark stats->rx_dropped++. */
- for (i = 0; i < RX_RING_SIZE; i++)
- if (lp->rx_ring[(entry+i) % RX_RING_SIZE].status < 0)
- break;
-
- if (i > RX_RING_SIZE -2) {
- lp->stats.rx_dropped++;
- lp->rx_ring[entry].status = 0x8000;
- lp->cur_rx++;
- }
- break;
- }
- skb->dev = dev;
- if (! rx_in_place) {
- skb_reserve(skb, 2); /* 16 byte align the data fields */
memcpy(skb_put(skb, pkt_len),
- bus_to_virt(lp->rx_ring[entry].bufaddr), pkt_len);
+ bus_to_virt(ep->rx_ring[entry].bufaddr), pkt_len);
+#endif
+ } else {
+ skb_put(skb = ep->rx_skbuff[entry], pkt_len);
+ ep->rx_skbuff[entry] = NULL;
}
-#if LINUX_VERSION_CODE > 0x10300
skb->protocol = eth_type_trans(skb, dev);
-#else
- skb->len = pkt_len;
-#endif
netif_rx(skb);
- lp->stats.rx_packets++;
+ ep->stats.rx_packets++;
}
-
- lp->rx_ring[entry].status = 0x8000;
- entry = (++lp->cur_rx) % RX_RING_SIZE;
+ work_done++;
+ entry = (++ep->cur_rx) % RX_RING_SIZE;
}
- return 0;
+ /* Refill the Rx ring buffers. */
+ for (; ep->cur_rx - ep->dirty_rx > 0; ep->dirty_rx++) {
+ entry = ep->dirty_rx % RX_RING_SIZE;
+ if (ep->rx_skbuff[entry] == NULL) {
+ struct sk_buff *skb;
+ skb = ep->rx_skbuff[entry] = dev_alloc_skb(PKT_BUF_SZ);
+ if (skb == NULL)
+ break;
+ skb->dev = dev; /* Mark as being used by this device. */
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ ep->rx_ring[entry].bufaddr = virt_to_bus(skb->tail);
+ work_done++;
+ }
+ ep->rx_ring[entry].status = 0x8000;
+ }
+ return work_done;
}
-static int
-epic_close(struct device *dev)
+static int epic_close(struct device *dev)
{
- int ioaddr = dev->base_addr;
- struct epic_private *tp = (struct epic_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
int i;
dev->start = 0;
dev->tbusy = 1;
if (epic_debug > 1)
- printk("%s: Shutting down ethercard, status was %2.2x.\n",
+ printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
dev->name, inl(ioaddr + INTSTAT));
/* Disable interrupts by clearing the interrupt mask. */
@@ -1064,67 +1154,61 @@
outw(0x0061, ioaddr + COMMAND);
/* Update the error counts. */
- tp->stats.rx_missed_errors += inb(ioaddr + MPCNT);
- tp->stats.rx_frame_errors += inb(ioaddr + ALICNT);
- tp->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
+ ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
+ ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
+ ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
- del_timer(&tp->timer);
+ del_timer(&ep->timer);
-#ifdef SA_SHIRQ
free_irq(dev->irq, dev);
-#else
- free_irq(dev->irq);
- irq2dev_map[dev->irq] = 0;
-#endif
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = tp->rx_skbuff[i];
- tp->rx_skbuff[i] = 0;
- tp->rx_ring[i].status = 0; /* Not owned by Epic chip. */
- tp->rx_ring[i].buflength = 0;
- tp->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
+ struct sk_buff *skb = ep->rx_skbuff[i];
+ ep->rx_skbuff[i] = 0;
+ ep->rx_ring[i].status = 0; /* Not owned by Epic chip. */
+ ep->rx_ring[i].buflength = 0;
+ ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
if (skb) {
#if LINUX_VERSION_CODE < 0x20100
skb->free = 1;
#endif
- dev_kfree_skb(skb);
+ DEV_FREE_SKB(skb);
}
}
for (i = 0; i < TX_RING_SIZE; i++) {
- if (tp->tx_skbuff[i])
- dev_kfree_skb(tp->tx_skbuff[i]);
- tp->tx_skbuff[i] = 0;
+ if (ep->tx_skbuff[i])
+ DEV_FREE_SKB(ep->tx_skbuff[i]);
+ ep->tx_skbuff[i] = 0;
}
/* Green! Leave the chip in low-power mode. */
outl(0x0008, ioaddr + GENCTL);
-
+
MOD_DEC_USE_COUNT;
return 0;
}
-static struct enet_statistics *
-epic_get_stats(struct device *dev)
+static struct net_device_stats *epic_get_stats(struct device *dev)
{
- struct epic_private *tp = (struct epic_private *)dev->priv;
- int ioaddr = dev->base_addr;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
+ long ioaddr = dev->base_addr;
if (dev->start) {
/* Update the error counts. */
- tp->stats.rx_missed_errors += inb(ioaddr + MPCNT);
- tp->stats.rx_frame_errors += inb(ioaddr + ALICNT);
- tp->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
+ ep->stats.rx_missed_errors += inb(ioaddr + MPCNT);
+ ep->stats.rx_frame_errors += inb(ioaddr + ALICNT);
+ ep->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
}
- return &tp->stats;
+ return &ep->stats;
}
/* Set or clear the multicast filter for this adaptor.
Note that we only use exclusion around actually queueing the
- new frame, not around filling tp->setup_frame. This is non-deterministic
+ new frame, not around filling ep->setup_frame. This is non-deterministic
when re-entered but still correct. */
/* The little-endian AUTODIN II ethernet CRC calculation.
@@ -1149,21 +1233,17 @@
}
-#ifdef NEW_MULTICAST
static void set_rx_mode(struct device *dev)
-#else
-static void set_rx_mode(struct device *dev, int num_addrs, void *addrs);
-#endif
{
- int ioaddr = dev->base_addr;
- struct epic_private *tp = (struct epic_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ struct epic_private *ep = (struct epic_private *)dev->priv;
unsigned char mc_filter[8]; /* Multicast hash filter */
int i;
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
outl(0x002C, ioaddr + RxCtrl);
/* Unconditionally log net taps. */
- printk("%s: Promiscuous mode enabled.\n", dev->name);
+ printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
memset(mc_filter, 0xff, sizeof(mc_filter));
} else if ((dev->mc_count > 0) || (dev->flags & IFF_ALLMULTI)) {
/* There is apparently a chip bug, so the multicast filter
@@ -1184,45 +1264,176 @@
mc_filter);
}
/* ToDo: perhaps we need to stop the Tx and Rx process here? */
- if (memcmp(mc_filter, tp->mc_filter, sizeof(mc_filter))) {
+ if (memcmp(mc_filter, ep->mc_filter, sizeof(mc_filter))) {
for (i = 0; i < 4; i++)
outw(((u16 *)mc_filter)[i], ioaddr + MC0 + i*4);
- memcpy(tp->mc_filter, mc_filter, sizeof(mc_filter));
+ memcpy(ep->mc_filter, mc_filter, sizeof(mc_filter));
}
return;
}
+
+static int mii_ioctl(struct device *dev, struct ifreq *rq, int cmd)
+{
+ long ioaddr = dev->base_addr;
+ u16 *data = (u16 *)&rq->ifr_data;
+
+ switch(cmd) {
+ case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
+ data[0] = ((struct epic_private *)dev->priv)->phys[0] & 0x1f;
+ /* Fall Through */
+ case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
+ if (! dev->start) {
+ outl(0x0200, ioaddr + GENCTL);
+ outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+ }
+ data[3] = mdio_read(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
+ if (! dev->start) {
+#ifdef notdef
+ outl(0x0008, ioaddr + GENCTL);
+ outl((inl(ioaddr + NVCTL) & ~0x483C) | 0x0000, ioaddr + NVCTL);
+#endif
+ }
+ return 0;
+ case SIOCDEVPRIVATE+2: /* Write the specified MII register */
+ if (!suser())
+ return -EPERM;
+ if (! dev->start) {
+ outl(0x0200, ioaddr + GENCTL);
+ outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
+ }
+ mdio_write(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2]);
+ if (! dev->start) {
+#ifdef notdef
+ outl(0x0008, ioaddr + GENCTL);
+ outl((inl(ioaddr + NVCTL) & ~0x483C) | 0x0000, ioaddr + NVCTL);
+#endif
+ }
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
-#ifdef MODULE
+#ifdef CARDBUS
-/* An additional parameter that may be passed in... */
-static int debug = -1;
+#include <pcmcia/driver_ops.h>
-int
-init_module(void)
+static dev_node_t *epic_attach(dev_locator_t *loc)
+{
+ struct device *dev;
+ u16 dev_id;
+ u32 io;
+ u8 bus, devfn, irq;
+
+ if (loc->bus != LOC_PCI) return NULL;
+ bus = loc->b.pci.bus; devfn = loc->b.pci.devfn;
+ printk(KERN_DEBUG "epic_attach(bus %d, function %d)\n", bus, devfn);
+ pcibios_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, &io);
+ pcibios_read_config_byte(bus, devfn, PCI_INTERRUPT_LINE, &irq);
+ pcibios_read_config_word(bus, devfn, PCI_DEVICE_ID, &dev_id);
+ io &= ~3;
+ if (io == 0 || irq == 0) {
+ printk(KERN_ERR "The EPIC/C CardBus Ethernet interface was not "
+ "assigned an %s.\n" KERN_ERR " It will not be activated.\n",
+ io == 0 ? "I/O address" : "IRQ");
+ return NULL;
+ }
+ dev = epic_probe1(bus, devfn, NULL, io, irq, 2, -1);
+ if (dev) {
+ dev_node_t *node = kmalloc(sizeof(dev_node_t), GFP_KERNEL);
+ strcpy(node->dev_name, dev->name);
+ node->major = node->minor = 0;
+ node->next = NULL;
+ MOD_INC_USE_COUNT;
+ return node;
+ }
+ return NULL;
+}
+
+static void epic_suspend(dev_node_t *node)
+{
+ struct device **devp, **next;
+ printk(KERN_INFO "epic_suspend(%s)\n", node->dev_name);
+ for (devp = &root_epic_dev; *devp; devp = next) {
+ next = &((struct epic_private *)(*devp)->priv)->next_module;
+ if (strcmp((*devp)->name, node->dev_name) == 0) break;
+ }
+ if (*devp) {
+ long ioaddr = (*devp)->base_addr;
+ epic_pause(*devp);
+ /* Put the chip into low-power mode. */
+ outl(0x0008, ioaddr + GENCTL);
+ }
+}
+static void epic_resume(dev_node_t *node)
+{
+ struct device **devp, **next;
+ printk(KERN_INFO "epic_resume(%s)\n", node->dev_name);
+ for (devp = &root_epic_dev; *devp; devp = next) {
+ next = &((struct epic_private *)(*devp)->priv)->next_module;
+ if (strcmp((*devp)->name, node->dev_name) == 0) break;
+ }
+ if (*devp) {
+ epic_restart(*devp);
+ }
+}
+static void epic_detach(dev_node_t *node)
{
- int cards_found;
+ struct device **devp, **next;
+ printk(KERN_INFO "epic_detach(%s)\n", node->dev_name);
+ for (devp = &root_epic_dev; *devp; devp = next) {
+ next = &((struct epic_private *)(*devp)->priv)->next_module;
+ if (strcmp((*devp)->name, node->dev_name) == 0) break;
+ }
+ if (*devp) {
+ unregister_netdev(*devp);
+ kfree(*devp);
+ *devp = *next;
+ kfree(node);
+ MOD_DEC_USE_COUNT;
+ }
+}
+
+struct driver_operations epic_ops = {
+ "epic_cb", epic_attach, epic_suspend, epic_resume, epic_detach
+};
- if (debug >= 0)
- epic_debug = debug;
+#endif /* Cardbus support */
- root_epic_dev = NULL;
- cards_found = epic100_probe(0);
+
+#ifdef MODULE
- return cards_found ? 0 : -ENODEV;
+int init_module(void)
+{
+ if (epic_debug)
+ printk(KERN_INFO "%s", version);
+
+#ifdef CARDBUS
+ register_driver(&epic_ops);
+ return 0;
+#else
+ return epic100_probe(0);
+#endif
}
-void
-cleanup_module(void)
+void cleanup_module(void)
{
struct device *next_dev;
+#ifdef CARDBUS
+ unregister_driver(&epic_ops);
+#endif
+
/* No need to check MOD_IN_USE, as sys_delete_module() checks. */
while (root_epic_dev) {
- next_dev = ((struct epic_private *)root_epic_dev->priv)->next_module;
+ struct epic_private *ep = (struct epic_private *)root_epic_dev->priv;
+ next_dev = ep->next_module;
unregister_netdev(root_epic_dev);
release_region(root_epic_dev->base_addr, EPIC_TOTAL_SIZE);
kfree(root_epic_dev);
root_epic_dev = next_dev;
+ kfree(ep);
}
}
@@ -1230,7 +1441,8 @@
/*
* Local variables:
- * compile-command: "gcc -DMODULE -DMODVERSIONS -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c epic100.c"
+ * compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c epic100.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ * cardbus-compile-command: "gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c epic100.c -o epic_cb.o -I/usr/src/pcmcia-cs-3.0.5/include/"
* c-indent-level: 4
* c-basic-offset: 4
* tab-width: 4
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov