patch-2.1.126 linux/drivers/scsi/aic7xxx/bsd_q.h

Next file: linux/drivers/scsi/aic7xxx/sequencer.h
Previous file: linux/drivers/scsi/aha152x.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.125/linux/drivers/scsi/aic7xxx/bsd_q.h linux/drivers/scsi/aic7xxx/bsd_q.h
@@ -1,507 +0,0 @@
-/*
- * Copyright (c) 1991, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)queue.h	8.5 (Berkeley) 8/20/94
- * $Id: queue.h,v 1.21 1998/05/12 03:55:25 gibbs Exp $
- */
-
-#ifndef _SYS_QUEUE_H_
-#define	_SYS_QUEUE_H_
-
-/*
- * This file defines five types of data structures: singly-linked lists,
- * slingly-linked tail queues, lists, tail queues, and circular queues.
- *
- * A singly-linked list is headed by a single forward pointer. The elements
- * are singly linked for minimum space and pointer manipulation overhead at
- * the expense of O(n) removal for arbitrary elements. New elements can be
- * added to the list after an existing element or at the head of the list.
- * Elements being removed from the head of the list should use the explicit
- * macro for this purpose for optimum efficiency. A singly-linked list may
- * only be traversed in the forward direction.  Singly-linked lists are ideal
- * for applications with large datasets and few or no removals or for
- * implementing a LIFO queue.
- *
- * A singly-linked tail queue is headed by a pair of pointers, one to the
- * head of the list and the other to the tail of the list. The elements are
- * singly linked for minimum space and pointer manipulation overhead at the
- * expense of O(n) removal for arbitrary elements. New elements can be added
- * to the list after an existing element, at the head of the list, or at the
- * end of the list. Elements being removed from the head of the tail queue
- * should use the explicit macro for this purpose for optimum efficiency.
- * A singly-linked tail queue may only be traversed in the forward direction.
- * Singly-linked tail queues are ideal for applications with large datasets
- * and few or no removals or for implementing a FIFO queue.
- *
- * A list is headed by a single forward pointer (or an array of forward
- * pointers for a hash table header). The elements are doubly linked
- * so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before
- * or after an existing element or at the head of the list. A list
- * may only be traversed in the forward direction.
- *
- * A tail queue is headed by a pair of pointers, one to the head of the
- * list and the other to the tail of the list. The elements are doubly
- * linked so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before or
- * after an existing element, at the head of the list, or at the end of
- * the list. A tail queue may only be traversed in the forward direction.
- *
- * A circle queue is headed by a pair of pointers, one to the head of the
- * list and the other to the tail of the list. The elements are doubly
- * linked so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before or after
- * an existing element, at the head of the list, or at the end of the list.
- * A circle queue may be traversed in either direction, but has a more
- * complex end of list detection.
- *
- * For details on the use of these macros, see the queue(3) manual page.
- *
- *
- *			SLIST	LIST	STAILQ	TAILQ	CIRCLEQ
- * _HEAD		+	+	+	+	+
- * _ENTRY		+	+	+	+	+
- * _INIT		+	+	+	+	+
- * _EMPTY		+	+	+	+	+
- * _FIRST		+	+	-	+	+
- * _NEXT		+	+	-	+	+
- * _PREV		-	-	-	+	+
- * _LAST		-	-	-	+	+
- * _FOREACH		+	+	-	+	-
- * _INSERT_HEAD		+	+	+	+	+
- * _INSERT_BEFORE	-	+	-	+	+
- * _INSERT_AFTER	+	+	+	+	+
- * _INSERT_TAIL		-	-	+	+	+
- * _REMOVE_HEAD		+	-	+	-	-
- * _REMOVE		+	+	+	+	+
- *
- */
-
-/*
- * Singly-linked List definitions.
- */
-#define SLIST_HEAD(name, type)						\
-struct name {								\
-	struct type *slh_first;	/* first element */			\
-}
- 
-#define SLIST_ENTRY(type)						\
-struct {								\
-	struct type *sle_next;	/* next element */			\
-}
- 
-/*
- * Singly-linked List functions.
- */
-#define	SLIST_EMPTY(head)	((head)->slh_first == NULL)
-
-#define	SLIST_FIRST(head)	((head)->slh_first)
-
-#define SLIST_FOREACH(var, head, field)					\
-	for((var) = (head)->slh_first; (var); (var) = (var)->field.sle_next)
-
-#define SLIST_INIT(head) {						\
-	(head)->slh_first = NULL;					\
-}
-
-#define SLIST_INSERT_AFTER(slistelm, elm, field) do  {			\
-	(elm)->field.sle_next = (slistelm)->field.sle_next;		\
-	(slistelm)->field.sle_next = (elm);				\
-} while (0)
-
-#define SLIST_INSERT_HEAD(head, elm, field) do {			\
-	(elm)->field.sle_next = (head)->slh_first;			\
-	(head)->slh_first = (elm);					\
-} while (0)
-
-#define SLIST_NEXT(elm, field)	((elm)->field.sle_next)
-
-#define SLIST_REMOVE_HEAD(head, field) do {				\
-	(head)->slh_first = (head)->slh_first->field.sle_next;		\
-} while (0)
-
-#define SLIST_REMOVE(head, elm, type, field) do {			\
-	if ((head)->slh_first == (elm)) {				\
-		SLIST_REMOVE_HEAD((head), field);			\
-	}								\
-	else {								\
-		struct type *curelm = (head)->slh_first;		\
-		while( curelm->field.sle_next != (elm) )		\
-			curelm = curelm->field.sle_next;		\
-		curelm->field.sle_next =				\
-		    curelm->field.sle_next->field.sle_next;		\
-	}								\
-} while (0)
-
-/*
- * Singly-linked Tail queue definitions.
- */
-#define STAILQ_HEAD(name, type)						\
-struct name {								\
-	struct type *stqh_first;/* first element */			\
-	struct type **stqh_last;/* addr of last next element */		\
-}
-
-#define STAILQ_ENTRY(type)						\
-struct {								\
-	struct type *stqe_next;	/* next element */			\
-}
-
-/*
- * Singly-linked Tail queue functions.
- */
-#define STAILQ_EMPTY(head) ((head)->stqh_first == NULL)
-
-#define	STAILQ_INIT(head) do {						\
-	(head)->stqh_first = NULL;					\
-	(head)->stqh_last = &(head)->stqh_first;			\
-} while (0)
-
-#define STAILQ_FIRST(head)	((head)->stqh_first)
-#define STAILQ_LAST(head)	(*(head)->stqh_last)
-
-#define STAILQ_INSERT_HEAD(head, elm, field) do {			\
-	if (((elm)->field.stqe_next = (head)->stqh_first) == NULL)	\
-		(head)->stqh_last = &(elm)->field.stqe_next;		\
-	(head)->stqh_first = (elm);					\
-} while (0)
-
-#define STAILQ_INSERT_TAIL(head, elm, field) do {			\
-	(elm)->field.stqe_next = NULL;					\
-	*(head)->stqh_last = (elm);					\
-	(head)->stqh_last = &(elm)->field.stqe_next;			\
-} while (0)
-
-#define STAILQ_INSERT_AFTER(head, tqelm, elm, field) do {		\
-	if (((elm)->field.stqe_next = (tqelm)->field.stqe_next) == NULL)\
-		(head)->stqh_last = &(elm)->field.stqe_next;		\
-	(tqelm)->field.stqe_next = (elm);				\
-} while (0)
-
-#define STAILQ_NEXT(elm, field)	((elm)->field.stqe_next)
-
-#define STAILQ_REMOVE_HEAD(head, field) do {				\
-	if (((head)->stqh_first =					\
-	     (head)->stqh_first->field.stqe_next) == NULL)		\
-		(head)->stqh_last = &(head)->stqh_first;		\
-} while (0)
-
-#define STAILQ_REMOVE(head, elm, type, field) do {			\
-	if ((head)->stqh_first == (elm)) {				\
-		STAILQ_REMOVE_HEAD(head, field);			\
-	}								\
-	else {								\
-		struct type *curelm = (head)->stqh_first;		\
-		while( curelm->field.stqe_next != (elm) )		\
-			curelm = curelm->field.stqe_next;		\
-		if((curelm->field.stqe_next =				\
-		    curelm->field.stqe_next->field.stqe_next) == NULL)	\
-			(head)->stqh_last = &(curelm)->field.stqe_next;	\
-	}								\
-} while (0)
-
-/*
- * List definitions.
- */
-
-#define LIST_ENTRY(type)						\
-struct {								\
-	struct type *le_next;	/* next element */			\
-	struct type **le_prev;	/* address of previous next element */	\
-}
-
-/*
- * List functions.
- */
-
-#define	LIST_EMPTY(head) ((head)->lh_first == NULL)
-
-#define LIST_FIRST(head)	((head)->lh_first)
-
-#define LIST_FOREACH(var, head, field)					\
-	for((var) = (head)->lh_first; (var); (var) = (var)->field.le_next)
-
-#define	LIST_INIT(head) do {						\
-	(head)->lh_first = NULL;					\
-} while (0)
-
-#define LIST_INSERT_AFTER(listelm, elm, field) do {			\
-	if (((elm)->field.le_next = (listelm)->field.le_next) != NULL)	\
-		(listelm)->field.le_next->field.le_prev =		\
-		    &(elm)->field.le_next;				\
-	(listelm)->field.le_next = (elm);				\
-	(elm)->field.le_prev = &(listelm)->field.le_next;		\
-} while (0)
-
-#define LIST_INSERT_BEFORE(listelm, elm, field) do {			\
-	(elm)->field.le_prev = (listelm)->field.le_prev;		\
-	(elm)->field.le_next = (listelm);				\
-	*(listelm)->field.le_prev = (elm);				\
-	(listelm)->field.le_prev = &(elm)->field.le_next;		\
-} while (0)
-
-#define LIST_INSERT_HEAD(head, elm, field) do {				\
-	if (((elm)->field.le_next = (head)->lh_first) != NULL)		\
-		(head)->lh_first->field.le_prev = &(elm)->field.le_next;\
-	(head)->lh_first = (elm);					\
-	(elm)->field.le_prev = &(head)->lh_first;			\
-} while (0)
-
-#define LIST_NEXT(elm, field)	((elm)->field.le_next)
-
-#define LIST_REMOVE(elm, field) do {					\
-	if ((elm)->field.le_next != NULL)				\
-		(elm)->field.le_next->field.le_prev = 			\
-		    (elm)->field.le_prev;				\
-	*(elm)->field.le_prev = (elm)->field.le_next;			\
-} while (0)
-
-/*
- * Tail queue definitions.
- */
-#define TAILQ_HEAD(name, type)						\
-struct name {								\
-	struct type *tqh_first;	/* first element */			\
-	struct type **tqh_last;	/* addr of last next element */		\
-}
-
-#define TAILQ_HEAD_INITIALIZER(head)					\
-	{ NULL, &(head).tqh_first }
-
-#define TAILQ_ENTRY(type)						\
-struct {								\
-	struct type *tqe_next;	/* next element */			\
-	struct type **tqe_prev;	/* address of previous next element */	\
-}
-
-/*
- * Tail queue functions.
- */
-#define	TAILQ_EMPTY(head) ((head)->tqh_first == NULL)
-
-#define TAILQ_FOREACH(var, head, field)					\
-	for (var = TAILQ_FIRST(head); var; var = TAILQ_NEXT(var, field))
-
-#define	TAILQ_FIRST(head) ((head)->tqh_first)
-
-#define	TAILQ_LAST(head, headname) \
-	(*(((struct headname *)((head)->tqh_last))->tqh_last))
-
-#define	TAILQ_NEXT(elm, field) ((elm)->field.tqe_next)
-
-#define TAILQ_PREV(elm, headname, field) \
-	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
-
-#define	TAILQ_INIT(head) do {						\
-	(head)->tqh_first = NULL;					\
-	(head)->tqh_last = &(head)->tqh_first;				\
-} while (0)
-
-#define TAILQ_INSERT_HEAD(head, elm, field) do {			\
-	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
-		(head)->tqh_first->field.tqe_prev =			\
-		    &(elm)->field.tqe_next;				\
-	else								\
-		(head)->tqh_last = &(elm)->field.tqe_next;		\
-	(head)->tqh_first = (elm);					\
-	(elm)->field.tqe_prev = &(head)->tqh_first;			\
-} while (0)
-
-#define TAILQ_INSERT_TAIL(head, elm, field) do {			\
-	(elm)->field.tqe_next = NULL;					\
-	(elm)->field.tqe_prev = (head)->tqh_last;			\
-	*(head)->tqh_last = (elm);					\
-	(head)->tqh_last = &(elm)->field.tqe_next;			\
-} while (0)
-
-#define TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
-	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
-		(elm)->field.tqe_next->field.tqe_prev = 		\
-		    &(elm)->field.tqe_next;				\
-	else								\
-		(head)->tqh_last = &(elm)->field.tqe_next;		\
-	(listelm)->field.tqe_next = (elm);				\
-	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
-} while (0)
-
-#define TAILQ_INSERT_BEFORE(listelm, elm, field) do {			\
-	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
-	(elm)->field.tqe_next = (listelm);				\
-	*(listelm)->field.tqe_prev = (elm);				\
-	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
-} while (0)
-
-#define TAILQ_REMOVE(head, elm, field) do {				\
-	if (((elm)->field.tqe_next) != NULL)				\
-		(elm)->field.tqe_next->field.tqe_prev = 		\
-		    (elm)->field.tqe_prev;				\
-	else								\
-		(head)->tqh_last = (elm)->field.tqe_prev;		\
-	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
-} while (0)
-
-/*
- * Circular queue definitions.
- */
-#define CIRCLEQ_HEAD(name, type)					\
-struct name {								\
-	struct type *cqh_first;		/* first element */		\
-	struct type *cqh_last;		/* last element */		\
-}
-
-#define CIRCLEQ_ENTRY(type)						\
-struct {								\
-	struct type *cqe_next;		/* next element */		\
-	struct type *cqe_prev;		/* previous element */		\
-}
-
-/*
- * Circular queue functions.
- */
-#define CIRCLEQ_EMPTY(head) ((head)->cqh_first == (void *)(head))
-
-#define CIRCLEQ_FIRST(head) ((head)->cqh_first)
-
-#define CIRCLEQ_FOREACH(var, head, field)				\
-	for((var) = (head)->cqh_first;					\
-	    (var) != (void *)(head);					\
-	    (var) = (var)->field.cqe_next)
-
-#define	CIRCLEQ_INIT(head) do {						\
-	(head)->cqh_first = (void *)(head);				\
-	(head)->cqh_last = (void *)(head);				\
-} while (0)
-
-#define CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {		\
-	(elm)->field.cqe_next = (listelm)->field.cqe_next;		\
-	(elm)->field.cqe_prev = (listelm);				\
-	if ((listelm)->field.cqe_next == (void *)(head))		\
-		(head)->cqh_last = (elm);				\
-	else								\
-		(listelm)->field.cqe_next->field.cqe_prev = (elm);	\
-	(listelm)->field.cqe_next = (elm);				\
-} while (0)
-
-#define CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {		\
-	(elm)->field.cqe_next = (listelm);				\
-	(elm)->field.cqe_prev = (listelm)->field.cqe_prev;		\
-	if ((listelm)->field.cqe_prev == (void *)(head))		\
-		(head)->cqh_first = (elm);				\
-	else								\
-		(listelm)->field.cqe_prev->field.cqe_next = (elm);	\
-	(listelm)->field.cqe_prev = (elm);				\
-} while (0)
-
-#define CIRCLEQ_INSERT_HEAD(head, elm, field) do {			\
-	(elm)->field.cqe_next = (head)->cqh_first;			\
-	(elm)->field.cqe_prev = (void *)(head);				\
-	if ((head)->cqh_last == (void *)(head))				\
-		(head)->cqh_last = (elm);				\
-	else								\
-		(head)->cqh_first->field.cqe_prev = (elm);		\
-	(head)->cqh_first = (elm);					\
-} while (0)
-
-#define CIRCLEQ_INSERT_TAIL(head, elm, field) do {			\
-	(elm)->field.cqe_next = (void *)(head);				\
-	(elm)->field.cqe_prev = (head)->cqh_last;			\
-	if ((head)->cqh_first == (void *)(head))			\
-		(head)->cqh_first = (elm);				\
-	else								\
-		(head)->cqh_last->field.cqe_next = (elm);		\
-	(head)->cqh_last = (elm);					\
-} while (0)
-
-#define CIRCLEQ_LAST(head) ((head)->cqh_last)
-
-#define CIRCLEQ_NEXT(elm,field) ((elm)->field.cqe_next)
-
-#define CIRCLEQ_PREV(elm,field) ((elm)->field.cqe_prev)
-
-#define	CIRCLEQ_REMOVE(head, elm, field) do {				\
-	if ((elm)->field.cqe_next == (void *)(head))			\
-		(head)->cqh_last = (elm)->field.cqe_prev;		\
-	else								\
-		(elm)->field.cqe_next->field.cqe_prev =			\
-		    (elm)->field.cqe_prev;				\
-	if ((elm)->field.cqe_prev == (void *)(head))			\
-		(head)->cqh_first = (elm)->field.cqe_next;		\
-	else								\
-		(elm)->field.cqe_prev->field.cqe_next =			\
-		    (elm)->field.cqe_next;				\
-} while (0)
-
-#ifdef KERNEL
-
-/*
- * XXX insque() and remque() are an old way of handling certain queues.
- * They bogusly assumes that all queue heads look alike.
- */
-
-struct quehead {
-	struct quehead *qh_link;
-	struct quehead *qh_rlink;
-};
-
-#ifdef	__GNUC__
-
-static __inline void
-insque(void *a, void *b)
-{
-	struct quehead *element = a, *head = b;
-
-	element->qh_link = head->qh_link;
-	element->qh_rlink = head;
-	head->qh_link = element;
-	element->qh_link->qh_rlink = element;
-}
-
-static __inline void
-remque(void *a)
-{
-	struct quehead *element = a;
-
-	element->qh_link->qh_rlink = element->qh_rlink;
-	element->qh_rlink->qh_link = element->qh_link;
-	element->qh_rlink = 0;
-}
-
-#else /* !__GNUC__ */
-
-void	insque __P((void *a, void *b));
-void	remque __P((void *a));
-
-#endif /* __GNUC__ */
-
-#endif /* KERNEL */
-
-#endif /* !_SYS_QUEUE_H_ */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov