patch-2.1.124 linux/arch/ppc/chrpboot/zlib.h

Next file: linux/arch/ppc/coffboot/Makefile
Previous file: linux/arch/ppc/chrpboot/zlib.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.123/linux/arch/ppc/chrpboot/zlib.h linux/arch/ppc/chrpboot/zlib.h
@@ -1,432 +0,0 @@
-/*	$Id: zlib.h,v 1.1 1997/09/19 07:03:47 paulus Exp $	*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- *  ==FILEVERSION 960122==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 0.95, Aug 16th, 1995.
-
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */	/* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-#    define STDC
-#  endif
-#endif
-
-#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-#  include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidp      opaque;  /* private data object passed to zalloc and zfree */
-
-    Byte     data_type; /* best guess about the data type: ascii or binary */
-
-} z_stream;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH    2
-#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
-#define Z_FINISH        4
-#define Z_PACKET_FLUSH	5
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Used to set the data_type field */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
- */
-
-                        /* basic functions */
-
-extern int inflateInit OF((z_stream *strm));
-/* 
-     Initializes the internal stream state for decompression. The fields
-   zalloc and zfree must be initialized before by the caller.  If zalloc and
-   zfree are set to Z_NULL, inflateInit updates them to use default allocation
-   functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory.  msg is set to null if there is no error message.
-   inflateInit does not perform any decompression: this will be done by
-   inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() always provides as much output as possible
-    (until there is no more input data or no more space in the output buffer).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
-  the stream structure was inconsistent (for example if next_in or next_out
-  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
-  progress is possible or if there was not enough room in the output buffer
-  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
-  call inflateSync to look for a good compression block.  */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* advanced functions */
-
-extern int inflateInit2 OF((z_stream *strm,
-                            int  windowBits));
-/*   
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc and zfree must be initialized before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* checksum functions */
-
-/*
-     This function is not related to compression but is exported
-   anyway because it might be useful in applications using the
-   compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov