patch-2.1.124 linux/arch/ppc/amiga/config.c
Next file: linux/arch/ppc/apus_defconfig
Previous file: linux/arch/ppc/amiga/amiints.c
Back to the patch index
Back to the overall index
- Lines: 930
- Date:
Wed Sep 30 10:14:16 1998
- Orig file:
v2.1.123/linux/arch/ppc/amiga/config.c
- Orig date:
Thu Aug 6 14:06:29 1998
diff -u --recursive --new-file v2.1.123/linux/arch/ppc/amiga/config.c linux/arch/ppc/amiga/config.c
@@ -2,6 +2,928 @@
#define m68k_num_memory num_memory
#define m68k_memory memory
+#include <linux/init.h>
+
+/* machine dependent "kbd-reset" setup function */
+void (*kbd_reset_setup) (char *, int) __initdata = 0;
+
#include <asm/io.h>
-#include "../../m68k/amiga/config.c"
+/*
+ * linux/arch/m68k/amiga/config.c
+ *
+ * Copyright (C) 1993 Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * Miscellaneous Amiga stuff
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/kd.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <linux/zorro.h>
+
+unsigned long amiga_model;
+unsigned long amiga_eclock;
+unsigned long amiga_masterclock;
+unsigned long amiga_colorclock;
+unsigned long amiga_chipset;
+unsigned char amiga_vblank;
+unsigned char amiga_psfreq;
+struct amiga_hw_present amiga_hw_present;
+
+static const char *amiga_models[] = {
+ "A500", "A500+", "A600", "A1000", "A1200", "A2000", "A2500", "A3000",
+ "A3000T", "A3000+", "A4000", "A4000T", "CDTV", "CD32", "Draco"
+};
+
+extern char m68k_debug_device[];
+
+static void amiga_sched_init(void (*handler)(int, void *, struct pt_regs *));
+/* amiga specific keyboard functions */
+extern int amiga_keyb_init(void);
+extern int amiga_kbdrate (struct kbd_repeat *);
+extern void amiga_kbd_reset_setup(char*, int);
+/* amiga specific irq functions */
+extern void amiga_init_IRQ (void);
+extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *);
+extern int amiga_request_irq (unsigned int irq,
+ void (*handler)(int, void *, struct pt_regs *),
+ unsigned long flags, const char *devname,
+ void *dev_id);
+extern void amiga_free_irq (unsigned int irq, void *dev_id);
+extern void amiga_enable_irq (unsigned int);
+extern void amiga_disable_irq (unsigned int);
+static void amiga_get_model(char *model);
+static int amiga_get_hardware_list(char *buffer);
+extern int amiga_get_irq_list (char *);
+/* amiga specific timer functions */
+static unsigned long amiga_gettimeoffset (void);
+static void a3000_gettod (int *, int *, int *, int *, int *, int *);
+static void a2000_gettod (int *, int *, int *, int *, int *, int *);
+static int amiga_hwclk (int, struct hwclk_time *);
+static int amiga_set_clock_mmss (unsigned long);
+extern void amiga_mksound( unsigned int count, unsigned int ticks );
+#ifdef CONFIG_AMIGA_FLOPPY
+extern void amiga_floppy_setup(char *, int *);
+#endif
+static void amiga_reset (void);
+static int amiga_wait_key (struct console *co);
+extern void amiga_init_sound(void);
+static void amiga_savekmsg_init(void);
+static void amiga_mem_console_write(struct console *co, const char *b,
+ unsigned int count);
+void amiga_serial_console_write(struct console *co, const char *s,
+ unsigned int count);
+static void amiga_debug_init(void);
+#ifdef CONFIG_HEARTBEAT
+static void amiga_heartbeat(int on);
+#endif
+
+static struct console amiga_console_driver = {
+ "debug",
+ NULL, /* write */
+ NULL, /* read */
+ NULL, /* device */
+ amiga_wait_key, /* wait_key */
+ NULL, /* unblank */
+ NULL, /* setup */
+ CON_PRINTBUFFER,
+ -1,
+ 0,
+ NULL
+};
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static char amiga_sysrq_xlate[128] =
+ "\0001234567890-=\\\000\000" /* 0x00 - 0x0f */
+ "qwertyuiop[]\000123" /* 0x10 - 0x1f */
+ "asdfghjkl;'\000\000456" /* 0x20 - 0x2f */
+ "\000zxcvbnm,./\000+789" /* 0x30 - 0x3f */
+ " \177\t\r\r\000\177\000\000\000-\000\000\000\000\000" /* 0x40 - 0x4f */
+ "\000\201\202\203\204\205\206\207\210\211()/*+\000" /* 0x50 - 0x5f */
+ "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" /* 0x60 - 0x6f */
+ "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"; /* 0x70 - 0x7f */
+#endif
+
+extern void (*kd_mksound)(unsigned int, unsigned int);
+
+ /*
+ * Parse an Amiga-specific record in the bootinfo
+ */
+
+int amiga_parse_bootinfo(const struct bi_record *record)
+{
+ int unknown = 0;
+ const unsigned long *data = record->data;
+
+ switch (record->tag) {
+ case BI_AMIGA_MODEL:
+ amiga_model = *data;
+ break;
+
+ case BI_AMIGA_ECLOCK:
+ amiga_eclock = *data;
+ break;
+
+ case BI_AMIGA_CHIPSET:
+ amiga_chipset = *data;
+ break;
+
+ case BI_AMIGA_CHIP_SIZE:
+ amiga_chip_size = *(const int *)data;
+ break;
+
+ case BI_AMIGA_VBLANK:
+ amiga_vblank = *(const unsigned char *)data;
+ break;
+
+ case BI_AMIGA_PSFREQ:
+ amiga_psfreq = *(const unsigned char *)data;
+ break;
+
+ case BI_AMIGA_AUTOCON:
+ if (zorro_num_autocon < ZORRO_NUM_AUTO)
+ memcpy(&zorro_autocon[zorro_num_autocon++],
+ (const struct ConfigDev *)data,
+ sizeof(struct ConfigDev));
+ else
+ printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
+ break;
+
+ case BI_AMIGA_SERPER:
+ /* serial port period: ignored here */
+ break;
+
+ default:
+ unknown = 1;
+ }
+ return(unknown);
+}
+
+ /*
+ * Identify builtin hardware
+ */
+
+__initfunc(static void amiga_identify(void))
+{
+ /* Fill in some default values, if necessary */
+ if (amiga_eclock == 0)
+ amiga_eclock = 709379;
+
+ memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
+
+ printk("Amiga hardware found: ");
+ if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO)
+ printk("[%s] ", amiga_models[amiga_model-AMI_500]);
+
+ switch(amiga_model) {
+ case AMI_UNKNOWN:
+ goto Generic;
+
+ case AMI_600:
+ case AMI_1200:
+ AMIGAHW_SET(A1200_IDE);
+ AMIGAHW_SET(PCMCIA);
+ case AMI_500:
+ case AMI_500PLUS:
+ case AMI_1000:
+ case AMI_2000:
+ case AMI_2500:
+ AMIGAHW_SET(A2000_CLK); /* Is this correct for all models? */
+ goto Generic;
+
+ case AMI_3000:
+ case AMI_3000T:
+ AMIGAHW_SET(AMBER_FF);
+ AMIGAHW_SET(MAGIC_REKICK);
+ /* fall through */
+ case AMI_3000PLUS:
+ AMIGAHW_SET(A3000_SCSI);
+ AMIGAHW_SET(A3000_CLK);
+ AMIGAHW_SET(ZORRO3);
+ goto Generic;
+
+ case AMI_4000T:
+ AMIGAHW_SET(A4000_SCSI);
+ /* fall through */
+ case AMI_4000:
+ AMIGAHW_SET(A4000_IDE);
+ AMIGAHW_SET(A3000_CLK);
+ AMIGAHW_SET(ZORRO3);
+ goto Generic;
+
+ case AMI_CDTV:
+ case AMI_CD32:
+ AMIGAHW_SET(CD_ROM);
+ AMIGAHW_SET(A2000_CLK); /* Is this correct? */
+ goto Generic;
+
+ Generic:
+ AMIGAHW_SET(AMI_VIDEO);
+ AMIGAHW_SET(AMI_BLITTER);
+ AMIGAHW_SET(AMI_AUDIO);
+ AMIGAHW_SET(AMI_FLOPPY);
+ AMIGAHW_SET(AMI_KEYBOARD);
+ AMIGAHW_SET(AMI_MOUSE);
+ AMIGAHW_SET(AMI_SERIAL);
+ AMIGAHW_SET(AMI_PARALLEL);
+ AMIGAHW_SET(CHIP_RAM);
+ AMIGAHW_SET(PAULA);
+
+ switch(amiga_chipset) {
+ case CS_OCS:
+ case CS_ECS:
+ case CS_AGA:
+ switch (custom.deniseid & 0xf) {
+ case 0x0c:
+ AMIGAHW_SET(DENISE_HR);
+ break;
+ case 0x08:
+ AMIGAHW_SET(LISA);
+ break;
+ }
+ break;
+ default:
+ AMIGAHW_SET(DENISE);
+ break;
+ }
+ switch ((custom.vposr>>8) & 0x7f) {
+ case 0x00:
+ AMIGAHW_SET(AGNUS_PAL);
+ break;
+ case 0x10:
+ AMIGAHW_SET(AGNUS_NTSC);
+ break;
+ case 0x20:
+ case 0x21:
+ AMIGAHW_SET(AGNUS_HR_PAL);
+ break;
+ case 0x30:
+ case 0x31:
+ AMIGAHW_SET(AGNUS_HR_NTSC);
+ break;
+ case 0x22:
+ case 0x23:
+ AMIGAHW_SET(ALICE_PAL);
+ break;
+ case 0x32:
+ case 0x33:
+ AMIGAHW_SET(ALICE_NTSC);
+ break;
+ }
+ AMIGAHW_SET(ZORRO);
+ break;
+
+ case AMI_DRACO:
+ panic("No support for Draco yet");
+
+ default:
+ panic("Unknown Amiga Model");
+ }
+
+#define AMIGAHW_ANNOUNCE(name, str) \
+ if (AMIGAHW_PRESENT(name)) \
+ printk(str)
+
+ AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
+ AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
+ AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
+ AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
+ AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
+ AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
+ AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
+ AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
+ AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
+ AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
+ AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
+ AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
+ AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
+ AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
+ AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
+ AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
+ AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
+ AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
+ AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
+ AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
+ AMIGAHW_ANNOUNCE(LISA, "LISA ");
+ AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
+ AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
+ AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
+ AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
+ AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
+ AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
+ AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
+ AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
+ if (AMIGAHW_PRESENT(ZORRO))
+ printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
+ printk("\n");
+
+#undef AMIGAHW_ANNOUNCE
+}
+
+ /*
+ * Setup the Amiga configuration info
+ */
+
+__initfunc(void config_amiga(void))
+{
+ amiga_debug_init();
+ amiga_identify();
+
+ mach_sched_init = amiga_sched_init;
+ mach_keyb_init = amiga_keyb_init;
+ mach_kbdrate = amiga_kbdrate;
+ kbd_reset_setup = amiga_kbd_reset_setup;
+ mach_init_IRQ = amiga_init_IRQ;
+ mach_default_handler = &amiga_default_handler;
+#ifndef CONFIG_APUS
+ mach_request_irq = amiga_request_irq;
+ mach_free_irq = amiga_free_irq;
+ enable_irq = amiga_enable_irq;
+ disable_irq = amiga_disable_irq;
+#endif
+ mach_get_model = amiga_get_model;
+ mach_get_hardware_list = amiga_get_hardware_list;
+ mach_get_irq_list = amiga_get_irq_list;
+ mach_gettimeoffset = amiga_gettimeoffset;
+ if (AMIGAHW_PRESENT(A3000_CLK)){
+ mach_gettod = a3000_gettod;
+ }
+ else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */
+ mach_gettod = a2000_gettod;
+ }
+
+ mach_max_dma_address = 0xffffffff; /*
+ * default MAX_DMA=0xffffffff
+ * on all machines. If we don't
+ * do so, the SCSI code will not
+ * be able to allocate any mem
+ * for transfers, unless we are
+ * dealing with a Z2 mem only
+ * system. /Jes
+ */
+
+ mach_hwclk = amiga_hwclk;
+ mach_set_clock_mmss = amiga_set_clock_mmss;
+#ifdef CONFIG_AMIGA_FLOPPY
+ mach_floppy_setup = amiga_floppy_setup;
+#endif
+ mach_reset = amiga_reset;
+ conswitchp = &dummy_con;
+ kd_mksound = amiga_mksound;
+#ifdef CONFIG_MAGIC_SYSRQ
+ mach_sysrq_key = 0x5f; /* HELP */
+ mach_sysrq_shift_state = 0x03; /* SHIFT+ALTGR */
+ mach_sysrq_shift_mask = 0xff; /* all modifiers except CapsLock */
+ mach_sysrq_xlate = amiga_sysrq_xlate;
+#endif
+#ifdef CONFIG_HEARTBEAT
+ mach_heartbeat = amiga_heartbeat;
+#endif
+
+ /* Fill in the clock values (based on the 700 kHz E-Clock) */
+ amiga_masterclock = 40*amiga_eclock; /* 28 MHz */
+ amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */
+
+ /* clear all DMA bits */
+ custom.dmacon = DMAF_ALL;
+ /* ensure that the DMA master bit is set */
+ custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
+
+ /* initialize chipram allocator */
+ amiga_chip_init ();
+
+ /* debugging using chipram */
+ if (!strcmp( m68k_debug_device, "mem" )){
+ if (!AMIGAHW_PRESENT(CHIP_RAM))
+ printk("Warning: no chipram present for debugging\n");
+ else {
+ amiga_savekmsg_init();
+ amiga_console_driver.write = amiga_mem_console_write;
+ register_console(&amiga_console_driver);
+ }
+ }
+
+ /* our beloved beeper */
+ if (AMIGAHW_PRESENT(AMI_AUDIO))
+ amiga_init_sound();
+
+ /*
+ * if it is an A3000, set the magic bit that forces
+ * a hard rekick
+ */
+ if (AMIGAHW_PRESENT(MAGIC_REKICK))
+ *(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
+
+#ifdef CONFIG_ZORRO
+ zorro_init();
+#endif
+}
+
+static unsigned short jiffy_ticks;
+
+__initfunc(static void amiga_sched_init(void (*timer_routine)(int, void *,
+ struct pt_regs *)))
+{
+ jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
+
+ ciab.cra &= 0xC0; /* turn off timer A, continuous mode, from Eclk */
+ ciab.talo = jiffy_ticks % 256;
+ ciab.tahi = jiffy_ticks / 256;
+
+ /* install interrupt service routine for CIAB Timer A
+ *
+ * Please don't change this to use ciaa, as it interferes with the
+ * SCSI code. We'll have to take a look at this later
+ */
+ request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, IRQ_FLG_LOCK,
+ "timer", NULL);
+ /* start timer */
+ ciab.cra |= 0x11;
+}
+
+#define TICK_SIZE 10000
+
+/* This is always executed with interrupts disabled. */
+static unsigned long amiga_gettimeoffset (void)
+{
+ unsigned short hi, lo, hi2;
+ unsigned long ticks, offset = 0;
+
+ /* read CIA B timer A current value */
+ hi = ciab.tahi;
+ lo = ciab.talo;
+ hi2 = ciab.tahi;
+
+ if (hi != hi2) {
+ lo = ciab.talo;
+ hi = hi2;
+ }
+
+ ticks = hi << 8 | lo;
+
+ if (ticks > jiffy_ticks / 2)
+ /* check for pending interrupt */
+ if (cia_set_irq(&ciab_base, 0) & CIA_ICR_TA)
+ offset = 10000;
+
+ ticks = jiffy_ticks - ticks;
+ ticks = (10000 * ticks) / jiffy_ticks;
+
+ return ticks + offset;
+}
+
+static void a3000_gettod (int *yearp, int *monp, int *dayp,
+ int *hourp, int *minp, int *secp)
+{
+ volatile struct tod3000 *tod = TOD_3000;
+
+ tod->cntrl1 = TOD3000_CNTRL1_HOLD;
+
+ *secp = tod->second1 * 10 + tod->second2;
+ *minp = tod->minute1 * 10 + tod->minute2;
+ *hourp = tod->hour1 * 10 + tod->hour2;
+ *dayp = tod->day1 * 10 + tod->day2;
+ *monp = tod->month1 * 10 + tod->month2;
+ *yearp = tod->year1 * 10 + tod->year2;
+
+ tod->cntrl1 = TOD3000_CNTRL1_FREE;
+}
+
+static void a2000_gettod (int *yearp, int *monp, int *dayp,
+ int *hourp, int *minp, int *secp)
+{
+ volatile struct tod2000 *tod = TOD_2000;
+
+ tod->cntrl1 = TOD2000_CNTRL1_HOLD;
+
+ while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
+ ;
+
+ *secp = tod->second1 * 10 + tod->second2;
+ *minp = tod->minute1 * 10 + tod->minute2;
+ *hourp = (tod->hour1 & 3) * 10 + tod->hour2;
+ *dayp = tod->day1 * 10 + tod->day2;
+ *monp = tod->month1 * 10 + tod->month2;
+ *yearp = tod->year1 * 10 + tod->year2;
+
+ if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
+ if (!(tod->hour1 & TOD2000_HOUR1_PM) && *hourp == 12)
+ *hourp = 0;
+ else if ((tod->hour1 & TOD2000_HOUR1_PM) && *hourp != 12)
+ *hourp += 12;
+ }
+
+ tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
+}
+
+static int amiga_hwclk(int op, struct hwclk_time *t)
+{
+ if (AMIGAHW_PRESENT(A3000_CLK)) {
+ volatile struct tod3000 *tod = TOD_3000;
+
+ tod->cntrl1 = TOD3000_CNTRL1_HOLD;
+
+ if (!op) { /* read */
+ t->sec = tod->second1 * 10 + tod->second2;
+ t->min = tod->minute1 * 10 + tod->minute2;
+ t->hour = tod->hour1 * 10 + tod->hour2;
+ t->day = tod->day1 * 10 + tod->day2;
+ t->wday = tod->weekday;
+ t->mon = tod->month1 * 10 + tod->month2 - 1;
+ t->year = tod->year1 * 10 + tod->year2;
+ } else {
+ tod->second1 = t->sec / 10;
+ tod->second2 = t->sec % 10;
+ tod->minute1 = t->min / 10;
+ tod->minute2 = t->min % 10;
+ tod->hour1 = t->hour / 10;
+ tod->hour2 = t->hour % 10;
+ tod->day1 = t->day / 10;
+ tod->day2 = t->day % 10;
+ if (t->wday != -1)
+ tod->weekday = t->wday;
+ tod->month1 = (t->mon + 1) / 10;
+ tod->month2 = (t->mon + 1) % 10;
+ tod->year1 = t->year / 10;
+ tod->year2 = t->year % 10;
+ }
+
+ tod->cntrl1 = TOD3000_CNTRL1_FREE;
+ } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
+ volatile struct tod2000 *tod = TOD_2000;
+
+ tod->cntrl1 = TOD2000_CNTRL1_HOLD;
+
+ while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
+ ;
+
+ if (!op) { /* read */
+ t->sec = tod->second1 * 10 + tod->second2;
+ t->min = tod->minute1 * 10 + tod->minute2;
+ t->hour = (tod->hour1 & 3) * 10 + tod->hour2;
+ t->day = tod->day1 * 10 + tod->day2;
+ t->wday = tod->weekday;
+ t->mon = tod->month1 * 10 + tod->month2 - 1;
+ t->year = tod->year1 * 10 + tod->year2;
+
+ if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
+ if (!(tod->hour1 & TOD2000_HOUR1_PM) && t->hour == 12)
+ t->hour = 0;
+ else if ((tod->hour1 & TOD2000_HOUR1_PM) && t->hour != 12)
+ t->hour += 12;
+ }
+ } else {
+ tod->second1 = t->sec / 10;
+ tod->second2 = t->sec % 10;
+ tod->minute1 = t->min / 10;
+ tod->minute2 = t->min % 10;
+ if (tod->cntrl3 & TOD2000_CNTRL3_24HMODE)
+ tod->hour1 = t->hour / 10;
+ else if (t->hour >= 12)
+ tod->hour1 = TOD2000_HOUR1_PM +
+ (t->hour - 12) / 10;
+ else
+ tod->hour1 = t->hour / 10;
+ tod->hour2 = t->hour % 10;
+ tod->day1 = t->day / 10;
+ tod->day2 = t->day % 10;
+ if (t->wday != -1)
+ tod->weekday = t->wday;
+ tod->month1 = (t->mon + 1) / 10;
+ tod->month2 = (t->mon + 1) % 10;
+ tod->year1 = t->year / 10;
+ tod->year2 = t->year % 10;
+ }
+
+ tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
+ }
+
+ return 0;
+}
+
+static int amiga_set_clock_mmss (unsigned long nowtime)
+{
+ short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+
+ if (AMIGAHW_PRESENT(A3000_CLK)) {
+ volatile struct tod3000 *tod = TOD_3000;
+
+ tod->cntrl1 = TOD3000_CNTRL1_HOLD;
+
+ tod->second1 = real_seconds / 10;
+ tod->second2 = real_seconds % 10;
+ tod->minute1 = real_minutes / 10;
+ tod->minute2 = real_minutes % 10;
+
+ tod->cntrl1 = TOD3000_CNTRL1_FREE;
+ } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
+ volatile struct tod2000 *tod = TOD_2000;
+
+ tod->cntrl1 = TOD2000_CNTRL1_HOLD;
+
+ while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
+ ;
+
+ tod->second1 = real_seconds / 10;
+ tod->second2 = real_seconds % 10;
+ tod->minute1 = real_minutes / 10;
+ tod->minute2 = real_minutes % 10;
+
+ tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
+ }
+
+ return 0;
+}
+
+static int amiga_wait_key (struct console *co)
+{
+ int i;
+
+ while (1) {
+ while (ciaa.pra & 0x40);
+
+ /* debounce */
+ for (i = 0; i < 1000; i++);
+
+ if (!(ciaa.pra & 0x40))
+ break;
+ }
+
+ /* wait for button up */
+ while (1) {
+ while (!(ciaa.pra & 0x40));
+
+ /* debounce */
+ for (i = 0; i < 1000; i++);
+
+ if (ciaa.pra & 0x40)
+ break;
+ }
+ return 0;
+}
+
+void dbprintf(const char *fmt , ...)
+{
+ static char buf[1024];
+ va_list args;
+ extern void console_print (const char *str);
+ extern int vsprintf(char * buf, const char * fmt, va_list args);
+
+ va_start(args, fmt);
+ vsprintf(buf, fmt, args);
+ va_end(args);
+
+ console_print (buf);
+}
+
+static NORET_TYPE void amiga_reset( void )
+ ATTRIB_NORET;
+
+static void amiga_reset (void)
+{
+ for (;;);
+}
+
+
+ /*
+ * Debugging
+ */
+
+#define SAVEKMSG_MAXMEM 128*1024
+
+#define SAVEKMSG_MAGIC1 0x53415645 /* 'SAVE' */
+#define SAVEKMSG_MAGIC2 0x4B4D5347 /* 'KMSG' */
+
+struct savekmsg {
+ unsigned long magic1; /* SAVEKMSG_MAGIC1 */
+ unsigned long magic2; /* SAVEKMSG_MAGIC2 */
+ unsigned long magicptr; /* address of magic1 */
+ unsigned long size;
+ char data[0];
+};
+
+static struct savekmsg *savekmsg = NULL;
+
+static void amiga_mem_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
+ memcpy(savekmsg->data+savekmsg->size, s, count);
+ savekmsg->size += count;
+ }
+}
+
+static void amiga_savekmsg_init(void)
+{
+ savekmsg = (struct savekmsg *)amiga_chip_alloc(SAVEKMSG_MAXMEM);
+ savekmsg->magic1 = SAVEKMSG_MAGIC1;
+ savekmsg->magic2 = SAVEKMSG_MAGIC2;
+ savekmsg->magicptr = VTOP(savekmsg);
+ savekmsg->size = 0;
+}
+
+static void amiga_serial_putc(char c)
+{
+ custom.serdat = (unsigned char)c | 0x100;
+
+#ifdef CONFIG_APUS
+ /* I'm sure this should not be necessary since the address is
+ marked non-cachable and coherent. Still, without it the
+ serial output is not usable. -jskov */
+ eieio ();
+#endif
+
+ while (!(custom.serdatr & 0x2000))
+ ;
+}
+
+void amiga_serial_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ while (count--) {
+ if (*s == '\n')
+ amiga_serial_putc('\r');
+ amiga_serial_putc(*s++);
+ }
+}
+
+#ifdef CONFIG_SERIAL_CONSOLE
+void amiga_serial_puts(const char *s)
+{
+ amiga_serial_console_write(NULL, s, strlen(s));
+}
+
+int amiga_serial_console_wait_key(struct console *co)
+{
+ int ch;
+
+ while (!(custom.intreqr & IF_RBF))
+ barrier();
+ ch = custom.serdatr & 0xff;
+ /* clear the interrupt, so that another character can be read */
+ custom.intreq = IF_RBF;
+ return ch;
+}
+
+void amiga_serial_gets(struct console *co, char *s, int len)
+{
+ int ch, cnt = 0;
+
+ while (1) {
+ ch = amiga_serial_console_wait_key(co);
+
+ /* Check for backspace. */
+ if (ch == 8 || ch == 127) {
+ if (cnt == 0) {
+ amiga_serial_putc('\007');
+ continue;
+ }
+ cnt--;
+ amiga_serial_puts("\010 \010");
+ continue;
+ }
+
+ /* Check for enter. */
+ if (ch == 10 || ch == 13)
+ break;
+
+ /* See if line is too long. */
+ if (cnt >= len + 1) {
+ amiga_serial_putc(7);
+ cnt--;
+ continue;
+ }
+
+ /* Store and echo character. */
+ s[cnt++] = ch;
+ amiga_serial_putc(ch);
+ }
+ /* Print enter. */
+ amiga_serial_puts("\r\n");
+ s[cnt] = 0;
+}
+#endif
+
+__initfunc(static void amiga_debug_init(void))
+{
+ if (!strcmp( m68k_debug_device, "ser" )) {
+ /* no initialization required (?) */
+ amiga_console_driver.write = amiga_serial_console_write;
+ register_console(&amiga_console_driver);
+ }
+}
+
+#ifdef CONFIG_HEARTBEAT
+static void amiga_heartbeat(int on)
+{
+ if (on)
+ ciaa.pra &= ~2;
+ else
+ ciaa.pra |= 2;
+}
+#endif
+
+ /*
+ * Amiga specific parts of /proc
+ */
+
+static void amiga_get_model(char *model)
+{
+ strcpy(model, "Amiga ");
+ if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO)
+ strcat(model, amiga_models[amiga_model-AMI_500]);
+}
+
+
+static int amiga_get_hardware_list(char *buffer)
+{
+ int len = 0;
+
+ if (AMIGAHW_PRESENT(CHIP_RAM))
+ len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
+ len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
+ amiga_psfreq, amiga_eclock);
+ if (AMIGAHW_PRESENT(AMI_VIDEO)) {
+ char *type;
+ switch(amiga_chipset) {
+ case CS_OCS:
+ type = "OCS";
+ break;
+ case CS_ECS:
+ type = "ECS";
+ break;
+ case CS_AGA:
+ type = "AGA";
+ break;
+ default:
+ type = "Old or Unknown";
+ break;
+ }
+ len += sprintf(buffer+len, "Graphics:\t%s\n", type);
+ }
+
+#define AMIGAHW_ANNOUNCE(name, str) \
+ if (AMIGAHW_PRESENT(name)) \
+ len += sprintf (buffer+len, "\t%s\n", str)
+
+ len += sprintf (buffer + len, "Detected hardware:\n");
+
+ AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
+ AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
+ AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
+ AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
+ AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
+ AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
+ AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
+ AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
+ AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
+ AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
+ AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
+ AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
+ AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
+ AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
+ AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
+ AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
+ AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
+ AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
+ AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
+ AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
+ AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
+ AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
+ AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
+ AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
+ AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
+ AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
+ AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
+ AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
+ AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
+ if (AMIGAHW_PRESENT(ZORRO))
+ len += sprintf(buffer+len, "\tZorro%s AutoConfig: %d Expansion Device%s\n",
+ AMIGAHW_PRESENT(ZORRO3) ? " III" : "",
+ zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
+
+#undef AMIGAHW_ANNOUNCE
+
+ return(len);
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov