Next file: linux/drivers/sound/Readme.cards
Previous file: linux/drivers/sound/Makefile
Back to the patch index
Back to the overall index
- Lines: 38
Fri Jul 10 14:03:36 1998
- Orig file:
- Orig date:
Tue Dec 9 09:49:59 1997
diff -u --recursive --new-file v2.1.108/linux/drivers/sound/Readme linux/drivers/sound/Readme
@@ -26,13 +26,13 @@
If you are looking for the installation instructions, please
look at Readme.linux.
+Supported sound cards
Please check http://www.opensound.com/ossfree if you don't find
-your soundcard there.
+your sound card there.
@@ -127,9 +127,9 @@
contain info about some recent bug fixes.
It's likely that you have some problems when trying to use the sound driver
-first time. Soundcards don't have standard configuration so there are no
+first time. Sound cards don't have standard configuration so there are no
good default configuration to use. Please try to use same I/O, DMA and IRQ
-values for the soundcard than with DOS.
+values for the sound card than with DOS.
If you get an error message when trying to use the driver, please look
at /var/adm/messages for more verbose error message.
@@ -159,7 +159,7 @@
work if "digitized voice support" was not enabled during "make config".
- "Device or resource busy". Probably the IRQ (or DMA) channel
- required by the soundcard is in use by some other device/driver.
+ required by the sound card is in use by some other device/driver.
- "I/O error". Almost certainly (99%) it's an IRQ or DMA conflict.
Look at the kernel messages in /var/adm/notice for more info.
FUNET's LINUX-ADM group, email@example.com
TCL-scripts by Sam Shen, firstname.lastname@example.org