patch-2.1.105 linux/drivers/char/radio-sf16fmi.c

• Lines: 267
• Date: Sun Jun 7 10:37:41 1998
• Orig file: v2.1.104/linux/drivers/char/radio-sf16fmi.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.1.104/linux/drivers/char/radio-sf16fmi.c linux/drivers/char/radio-sf16fmi.c
@@ -0,0 +1,266 @@
+/* SF16FMI radio driver for Linux radio support
+ * heavily based on rtrack driver...
+ * (c) 1997 M. Kirkwood
+ * (c) 1998 Petr Vandrovec, vandrove@vc.cvut.cz
+ *
+ * Fitted to new interface by Alan Cox <alan.cox@linux.org>
+ *
+ * Notes on the hardware
+ *
+ *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
+ *  No volume control - only mute/unmute - you have to use line volume
+ *  control on SB-part of SF16FMI
+ *  
+ */
+
+#include <linux/module.h>	/* Modules 			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* check_region, request_region	*/
+#include <linux/delay.h>	/* udelay			*/
+#include <asm/io.h>		/* outb, outb_p			*/
+#include <asm/uaccess.h>	/* copy to/from user		*/
+#include <linux/videodev.h>	/* kernel radio structs		*/
+#include <linux/config.h>	/* CONFIG_RADIO_SF16MI_PORT 	*/
+
+#include "rsf16fmi.h"
+
+struct fmi_device
+{
+	int port;
+	int curvol;
+	unsigned long curfreq;
+};
+
+#ifndef CONFIG_RADIO_SF16FMI_PORT
+#define CONFIG_RADIO_SF16FMI_PORT -1
+#endif
+
+static int io = CONFIG_RADIO_SF16FMI_PORT; 
+static int users = 0;
+
+/* local things */
+#define RSF16_ENCODE(x)	((x*(1000/RADIO_FM_RES)+10700)/50)
+
+static void outbits(int bits, int data, int port)
+{
+	while(bits--) {
+ 		if(data & 1) {
+			outb(5, port);
+			udelay(6);
+			outb(7, port);
+			udelay(6);
+		} else {
+			outb(1, port);
+			udelay(6);
+			outb(3, port);
+			udelay(6);
+		}
+		data>>=1;
+	}
+}
+
+static void fmi_mute(int port)
+{
+	outb(0x00, port);
+}
+
+static void fmi_unmute(int port)
+{
+	outb(0x08, port);
+}
+
+/* FREQ is in 1/16ths of a MHz so this is probably wrong atm */
+
+static int fmi_setfreq(struct fmi_device *dev, unsigned long freq)
+{
+	int myport = dev->port;
+
+	outbits(16, RSF16_ENCODE(freq), myport);
+	outbits(8, 0xC0, myport);
+	/* we should wait here... */
+	return 0;
+}
+
+static int fmi_getsigstr(struct fmi_device *dev)
+{
+	int val;
+	int res;
+	int myport = dev->port;
+
+	val = dev->curvol ? 0x08 : 0x00;	/* unmute/mute */
+	outb(val, myport);
+	outb(val | 0x10, myport);
+	udelay(140000);
+	res = (int)inb(myport+1);
+	outb(val, myport);
+	return (res & 2) ? 0 : 1;
+}
+
+static int fmi_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
+{
+	struct fmi_device *fmi=dev->priv;
+	
+	switch(cmd)
+	{
+		case VIDIOCGCAP:
+		{
+			struct video_capability v;
+			v.type=VID_TYPE_TUNER;
+			v.channels=1;
+			v.audios=1;
+			/* No we don't do pictures */
+			v.maxwidth=0;
+			v.maxheight=0;
+			v.minwidth=0;
+			v.minheight=0;
+			if(copy_to_user(arg,&v,sizeof(v)))
+				return -EFAULT;
+			return 0;
+		}
+		case VIDIOCGTUNER:
+		{
+			struct video_tuner v;
+			if(copy_from_user(&v, arg,sizeof(v))!=0)
+				return -EFAULT;
+			if(v.tuner)	/* Only 1 tuner */
+				return -EINVAL;
+			v.rangelow=(int)(87.5*16);
+			v.rangehigh=(int)(108.0*16);
+			v.flags=0;
+			v.mode=VIDEO_MODE_AUTO;
+			v.signal=0xFFFF*fmi_getsigstr(fmi);
+			if(copy_to_user(arg,&v, sizeof(v)))
+				return -EFAULT;
+			return 0;
+		}
+		case VIDIOCSTUNER:
+		{
+			struct video_tuner v;
+			if(copy_from_user(&v, arg, sizeof(v)))
+				return -EFAULT;
+			if(v.tuner!=0)
+				return -EINVAL;
+			/* Only 1 tuner so no setting needed ! */
+			return 0;
+		}
+		case VIDIOCGFREQ:
+			if(copy_to_user(arg, &fmi->curfreq, sizeof(fmi->curfreq)))
+				return -EFAULT;
+			return 0;
+		case VIDIOCSFREQ:
+			if(copy_from_user(&fmi->curfreq, arg,sizeof(fmi->curfreq)))
+				return -EFAULT;
+			fmi_setfreq(fmi, fmi->curfreq);
+			return 0;
+		case VIDIOCGAUDIO:
+		{	
+			struct video_audio v;
+			memset(&v,0, sizeof(v));
+			v.flags|=VIDEO_AUDIO_MUTABLE;
+			v.mode=VIDEO_SOUND_MONO;
+			v.volume=fmi->curvol;
+			strcpy(v.name, "Radio");
+			if(copy_to_user(arg,&v, sizeof(v)))
+				return -EFAULT;
+			return 0;			
+		}
+		case VIDIOCSAUDIO:
+		{
+			struct video_audio v;
+			if(copy_from_user(&v, arg, sizeof(v)))
+				return -EFAULT;
+			if(v.audio)
+				return -EINVAL;
+			fmi->curvol=v.volume;
+			if(v.flags&VIDEO_AUDIO_MUTE)
+				fmi_mute(fmi->port);
+			else if(fmi->curvol)
+				fmi_unmute(fmi->port);
+			else
+				fmi_mute(fmi->port);
+			return 0;
+		}
+		default:
+			return -ENOIOCTLCMD;
+	}
+}
+
+static int fmi_open(struct video_device *dev, int flags)
+{
+	if(users)
+		return -EBUSY;
+	users++;
+	MOD_INC_USE_COUNT;
+	return 0;
+}
+
+static void fmi_close(struct video_device *dev)
+{
+	users--;
+	MOD_DEC_USE_COUNT;
+}
+
+static struct fmi_device fmi_unit;
+
+static struct video_device fmi_radio=
+{
+	"SF16FMI radio",
+	VID_TYPE_TUNER,
+	VID_HARDWARE_SF16MI,
+	fmi_open,
+	fmi_close,
+	NULL,	/* Can't read  (no capture ability) */
+	NULL,	/* Can't write */
+	fmi_ioctl,
+	NULL,
+	NULL
+};
+
+__initfunc(int fmi_init(struct video_init *v))
+{
+	if (check_region(io, 2)) 
+	{
+		printk(KERN_ERR "fmi: port 0x%x already in use\n", io);
+		return -EBUSY;
+	}
+
+	fmi_unit.port=io;
+	fmi_radio.priv=&fmi_unit;
+	
+	if(video_register_device(&fmi_radio, VFL_TYPE_RADIO)==-1)
+		return -EINVAL;
+		
+	request_region(io, 2, "fmi");
+	printk(KERN_INFO "SF16FMI radio card driver.\n");
+	printk(KERN_INFO "(c) 1998 Petr Vandrovec, vandrove@vc.cvut.cz.\n");
+	/* mute card - prevents noisy bootups */
+	fmi_mute(io);
+	return 0;
+}
+
+#ifdef MODULE
+
+MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood");
+MODULE_DESCRIPTION("A driver for the SF16MI radio.");
+MODULE_PARM(io, "i");
+MODULE_PARM_DESC(io, "I/O address of the SF16MI card (0x284 or 0x384)");
+
+EXPORT_NO_SYMBOLS;
+
+int init_module(void)
+{
+	if(io==-1)
+	{
+		printk(KERN_ERR "You must set an I/O address with io=0x???\n");
+		return -EINVAL;
+	}
+	return fmi_init(NULL);
+}
+
+void cleanup_module(void)
+{
+	video_unregister_device(&fmi_radio);
+	release_region(io,2);
+}
+
+#endif