patch-2.1.102 linux/drivers/sound/Config.in

• Lines: 277
• Date: Thu May 14 10:33:17 1998
• Orig file: v2.1.101/linux/drivers/sound/Config.in
• Orig date: Tue Apr 14 14:29:24 1998

diff -u --recursive --new-file v2.1.101/linux/drivers/sound/Config.in linux/drivers/sound/Config.in
@@ -1,12 +1,23 @@
-dep_tristate 'ProAudioSpectrum 16 support' CONFIG_PAS $CONFIG_SOUND
-if [ "$CONFIG_PAS" = "y" ]; then
+# drivers/sound/Config.in
+#
+# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
+# More hacking for modularisation.
+#
+# See drivers/sound/README.CONFIG for more information.
+
+
+
+# Prompt user for primary drivers.
+
+dep_tristate 'ProAudioSpectrum 16 support' CONFIG_SOUND_PAS $CONFIG_SOUND
+if [ "$CONFIG_SOUND_PAS" = "y" ]; then
     int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15' CONFIG_PAS_IRQ 10
     int 'PAS16 DMA 0, 1, 3, 5, 6 or 7' CONFIG_PAS_DMA 3
     bool 'Enable PAS16 joystick port' CONFIG_PAS_JOYSTICK
 fi
 
-dep_tristate '100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support' CONFIG_SB $CONFIG_SOUND
-if [ "$CONFIG_SB" = "y" ]; then
+dep_tristate '100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support' CONFIG_SOUND_SB $CONFIG_SOUND
+if [ "$CONFIG_SOUND_SB" = "y" ]; then
     hex 'I/O base for SB Check from manual of the card' CONFIG_SB_BASE 220
     int 'Sound Blaster IRQ Check from manual of the card' CONFIG_SB_IRQ 7
     int 'Sound Blaster DMA 0, 1 or 3' CONFIG_SB_DMA 1
@@ -17,33 +28,33 @@
     int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Check from manual of the card' CONFIG_SB_MPU_IRQ -1
 fi
 
-dep_tristate 'Generic OPL2/OPL3 FM synthesizer support' CONFIG_ADLIB $CONFIG_SOUND
+dep_tristate 'Generic OPL2/OPL3 FM synthesizer support' CONFIG_SOUND_ADLIB $CONFIG_SOUND
 
-dep_tristate 'Gravis Ultrasound support' CONFIG_GUS $CONFIG_SOUND
-if [ "$CONFIG_GUS" != "n" ]; then
+dep_tristate 'Gravis Ultrasound support' CONFIG_SOUND_GUS $CONFIG_SOUND
+if [ "$CONFIG_SOUND_GUS" = "y" -o "$CONFIG_SOUND_GUS" = "m" ]; then
     bool '16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_GUS16 
     bool 'GUS MAX support' CONFIG_GUSMAX
-    if [ "$CONFIG_GUS" = "y" ]; then
-	hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' CONFIG_GUS_BASE 220
-	int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' CONFIG_GUS_IRQ 15
-	int 'GUS DMA 1, 3, 5, 6 or 7' CONFIG_GUS_DMA 6
-	int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' CONFIG_GUS_DMA2 -1
-	if [ "$CONFIG_GUS16" = "y" ]; then
-	    hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' CONFIG_GUS16_BASE 530
-	    int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' CONFIG_GUS16_IRQ 7
-	    int 'GUS DMA 0, 1 or 3' CONFIG_GUS16_DMA 3
-	fi
+fi
+if [ "$CONFIG_SOUND_GUS" = "y" ]; then
+    hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' CONFIG_GUS_BASE 220
+    int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' CONFIG_GUS_IRQ 15
+    int 'GUS DMA 1, 3, 5, 6 or 7' CONFIG_GUS_DMA 6
+    int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' CONFIG_GUS_DMA2 -1
+    if [ "$CONFIG_GUS16" = "y" ]; then
+	hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' CONFIG_GUS16_BASE 530
+	int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' CONFIG_GUS16_IRQ 7
+	int 'GUS DMA 0, 1 or 3' CONFIG_GUS16_DMA 3
     fi
 fi
 
-dep_tristate 'MPU-401 support (NOT for SB16)' CONFIG_MPU401 $CONFIG_SOUND
-if [ "$CONFIG_MPU401" = "y" ]; then
+dep_tristate 'MPU-401 support (NOT for SB16)' CONFIG_SOUND_MPU401 $CONFIG_SOUND
+if [ "$CONFIG_SOUND_MPU401" = "y" ]; then
     hex 'I/O base for MPU401 Check from manual of the card' CONFIG_MPU_BASE 330
     int 'MPU401 IRQ Check from manual of the card' CONFIG_MPU_IRQ 9
 fi
 
-dep_tristate 'PSS (AD1848, ADSP-2115, ESC614) support' CONFIG_PSS $CONFIG_SOUND 
-if [ "$CONFIG_PSS" = "y" ]; then
+dep_tristate 'PSS (AD1848, ADSP-2115, ESC614) support' CONFIG_SOUND_PSS $CONFIG_SOUND
+if [ "$CONFIG_SOUND_PSS" = "y" ]; then
     hex 'PSS I/O base 220 or 240' CONFIG_PSS_BASE 220
     hex 'PSS audio I/O base 530, 604, E80 or F40' CONFIG_PSS_MSS_BASE 530
     int 'PSS audio IRQ 7, 9, 10 or 11' CONFIG_PSS_MSS_IRQ 11
@@ -55,20 +66,20 @@
        string '  Full pathname of DSPxxx.LD firmware file' CONFIG_PSS_BOOT_FILE
     fi
 fi
-if [ "$CONFIG_PSS" = "m" ] || [ "$CONFIG_PSS" = "y" ]; then
+if [ "$CONFIG_SOUND_PSS" = "y" -o "$CONFIG_SOUND_PSS" = "m" ]; then
     bool '  Enable PSS mixer (Beethoven ADSP-16 and other compatibile)' CONFIG_PSS_MIXER
 fi
 
-dep_tristate 'Microsoft Sound System support' CONFIG_MSS $CONFIG_SOUND
-if [ "$CONFIG_MSS" = "y" ]; then
+dep_tristate 'Microsoft Sound System support' CONFIG_SOUND_MSS $CONFIG_SOUND
+if [ "$CONFIG_SOUND_MSS" = "y" ]; then
     hex 'MSS/WSS I/O base 530, 604, E80 or F40' CONFIG_MSS_BASE 530
     int 'MSS/WSS IRQ 7, 9, 10 or 11' CONFIG_MSS_IRQ 11
     int 'MSS/WSS DMA 0, 1 or 3' CONFIG_MSS_DMA 3
     int 'MSS/WSS second DMA (if possible) 0, 1 or 3' CONFIG_MSS_DMA2 -1
 fi
 
-dep_tristate 'Ensoniq SoundScape support' CONFIG_SSCAPE $CONFIG_SOUND
-if [ "$CONFIG_SSCAPE" = "y" ]; then
+dep_tristate 'Ensoniq SoundScape support' CONFIG_SOUND_SSCAPE $CONFIG_SOUND
+if [ "$CONFIG_SOUND_SSCAPE" = "y" ]; then
     hex 'SoundScape MIDI I/O base 320, 330, 340 or 350' CONFIG_SSCAPE_BASE 330
     int 'SoundScape MIDI IRQ ' CONFIG_SSCAPE_IRQ 9
     int 'SoundScape initialization DMA 0, 1 or 3' CONFIG_SSCAPE_DMA 3
@@ -76,8 +87,8 @@
     int 'SoundScape audio IRQ 7, 9, 10 or 11' CONFIG_SSCAPE_MSS_IRQ 11
 fi
 
-dep_tristate 'MediaTrix AudioTrix Pro support' CONFIG_TRIX $CONFIG_SOUND
-if [ "$CONFIG_TRIX" = "y" ]; then
+dep_tristate 'MediaTrix AudioTrix Pro support' CONFIG_SOUND_TRIX $CONFIG_SOUND
+if [ "$CONFIG_SOUND_TRIX" = "y" ]; then
     hex 'OPL3-SA1 audio I/O base 530, 604, E80 or F40' CONFIG_TRIX_BASE 530
     int 'OPL3-SA1 audio IRQ 7, 9, 10 or 11' CONFIG_TRIX_IRQ 11
     int 'OPL3-SA1 audio DMA 0, 1 or 3' CONFIG_TRIX_DMA 0
@@ -93,9 +104,9 @@
     fi
 fi
 
-dep_tristate 'Support for OPTi MAD16 and/or Mozart based cards' CONFIG_MAD16 $CONFIG_SOUND
-dep_tristate 'Support MIDI in older MAD16 based cards (requires SB)' CONFIG_MAD16_OLDCARD $CONFIG_MAD16
-if [ "$CONFIG_MAD16" = "y" ]; then
+dep_tristate 'Support for OPTi MAD16 and/or Mozart based cards' CONFIG_SOUND_MAD16 $CONFIG_SOUND
+dep_tristate 'Support MIDI in older MAD16 based cards (requires SB)' CONFIG_MAD16_OLDCARD $CONFIG_SOUND_MAD16
+if [ "$CONFIG_SOUND_MAD16" = "y" ]; then
     hex 'MAD16 audio I/O base 530, 604, E80 or F40' CONFIG_MAD16_BASE 530
     int 'MAD16 audio IRQ 7, 9, 10 or 11' CONFIG_MAD16_IRQ 11
     int 'MAD16 audio DMA 0, 1 or 3' CONFIG_MAD16_DMA 3
@@ -104,8 +115,8 @@
     int 'MAD16 MIDI IRQ 5, 7, 9 or 10' CONFIG_MAD16_MPU_IRQ 9
 fi
 
-dep_tristate 'Support for Crystal CS4232 based (PnP) cards' CONFIG_CS4232 $CONFIG_SOUND
-if [ "$CONFIG_CS4232" = "y" ]; then
+dep_tristate 'Support for Crystal CS4232 based (PnP) cards' CONFIG_SOUND_CS4232 $CONFIG_SOUND
+if [ "$CONFIG_SOUND_CS4232" = "y" ]; then
     hex 'CS4232 audio I/O base 530, 604, E80 or F40' CONFIG_CS4232_BASE 530
     int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_CS4232_IRQ 11
     int 'CS4232 audio DMA 0, 1 or 3' CONFIG_CS4232_DMA 0
@@ -114,8 +125,8 @@
     int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15' CONFIG_CS4232_MPU_IRQ 9
 fi
 
-dep_tristate 'Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_MAUI $CONFIG_SOUND
-if [ "$CONFIG_MAUI" = "y" ]; then
+dep_tristate 'Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_SOUND_MAUI $CONFIG_SOUND
+if [ "$CONFIG_SOUND_MAUI" = "y" ]; then
     hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330' CONFIG_MAUI_BASE 330
     int 'Maui IRQ 5, 9, 12 or 15' CONFIG_MAUI_IRQ 9
     bool '  Have OSWF.MOT firmware file' CONFIG_MAUI_HAVE_BOOT
@@ -124,8 +135,17 @@
     fi
 fi
 
-dep_tristate 'Yamaha OPL3-SA1 audio controller' CONFIG_OPL3SA1 $CONFIG_SOUND
-if [ "$CONFIG_OPL3SA1" = "y" ]; then
+dep_tristate 'Support for Aztech Sound Galaxy (non-PnP) cards' CONFIG_SGALAXY $CONFIG_SOUND
+if [ "$CONFIG_SGALAXY" = "y" ]; then
+    hex 'SGALAXY audio I/O base 530, 604, E80 or F40' CONFIG_SGALAXY_BASE 530
+    int 'SGALAXY audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_SGALAXY_IRQ 11
+    int 'SGALAXY audio DMA 0, 1 or 3' CONFIG_SGALAXY_DMA 0
+    int 'SGALAXY second (duplex) DMA 0, 1 or 3' CONFIG_SGALAXY_DMA2 3
+    hex 'SGALAXY SB I/O base 220 or 240' CONFIG_SGALAXY_SGBASE 220
+fi
+
+dep_tristate 'Yamaha OPL3-SA1 audio controller' CONFIG_SOUND_OPL3SA1 $CONFIG_SOUND
+if [ "$CONFIG_SOUND_OPL3SA1" = "y" ]; then
     hex 'OPL3-SA1 audio I/O base 530, 604, E80 or F40' CONFIG_OPL3SA1_BASE 530
     int 'OPL3-SA1 audio IRQ 7, 9, 10 or 11' CONFIG_OPL3SA1_IRQ 11
     int 'OPL3-SA1 audio DMA 0, 1 or 3' CONFIG_OPL3SA1_DMA 0
@@ -134,88 +154,34 @@
     int 'OPL3-SA1 MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_OPL3SA1_MPU_IRQ 9
 fi
 
-dep_tristate 'SoftOSS software wave table engine' CONFIG_SOFTOSS $CONFIG_SOUND
-if [ "$CONFIG_SOFTOSS" = "y" ]; then
+dep_tristate 'SoftOSS software wave table engine' CONFIG_SOUND_SOFTOSS $CONFIG_SOUND
+if [ "$CONFIG_SOUND_SOFTOSS" = "y" ]; then
     int 'Sampling rate for SoftOSS 8000 to 48000' CONFIG_SOFTOSS_RATE 22050
     int 'Max # of concurrent voices for SoftOSS 4 to 32' CONFIG_SOFTOSS_VOICES 32
 fi
 
-dep_tristate 'FM synthesizer (YM3812/OPL-3) support' CONFIG_YM3812 $CONFIG_SOUND
-dep_tristate 'Loopback MIDI device support' CONFIG_VMIDI $CONFIG_SOUND
+dep_tristate 'FM synthesizer (YM3812/OPL-3) support' CONFIG_SOUND_YM3812 $CONFIG_SOUND
 
-dep_tristate '6850 UART support' CONFIG_UART6850 $CONFIG_SOUND
+dep_tristate 'Loopback MIDI device support' CONFIG_SOUND_VMIDI $CONFIG_SOUND
+
+dep_tristate '6850 UART support' CONFIG_SOUND_UART6850 $CONFIG_SOUND
 if [ "$CONFIG_UART6850" = "y" ]; then
     hex 'I/O base for UART 6850 MIDI port (Unknown)' CONFIG_U6850_BASE 0
     int 'UART6850 IRQ (Unknown)' CONFIG_U6850_IRQ -1
 fi
 
+if [ "$CONFIG_ARM" = "y" ]; then
+    bool 'VIDC 16-bit sound' CONFIG_VIDC_SOUND
+fi
+
 
-bool 'Additional low level drivers' CONFIG_LOWLEVEL_SOUND
 
-if [ "$CONFIG_LOWLEVEL_SOUND" = "y" ]; then
-   dep_tristate 'ACI mixer (miroPCM12)' CONFIG_ACI_MIXER $CONFIG_SOUND
-   dep_tristate 'AWE32 synth' CONFIG_AWE32_SYNTH $CONFIG_SOUND
-   dep_tristate 'Gallant Audio Cards (SC-6000 and SC-6600 based)' CONFIG_AEDSP16 $CONFIG_SOUND
-
-   if [ "$CONFIG_AEDSP16" = "y" -o "$CONFIG_AEDSP16" = "m" ]; then
-      hex '  I/O base for Audio Excel DSP 16 220 or 240' CONFIG_AEDSP16_BASE 220
-   fi
-
-   if [ "$CONFIG_AEDSP16" = "y" ]; then
-      comment 'SC-6600 Audio Cards have no jumper switches at all'
-      bool 'SC-6600 based audio cards (new Audio Excel DSP 16)' CONFIG_SC6600
-
-      if [ "$CONFIG_SB" = "y" -o "$CONFIG_SB" = "m" -a "$CONFIG_AEDSP16_MSS" != "y" ]; then
-         bool 'Audio Excel DSP 16 (SBPro emulation)' CONFIG_AEDSP16_SBPRO
-         if [ "$CONFIG_AEDSP16_SBPRO" = "y" ]; then
-	    comment 'Audio Excel DSP 16 [Sound Blaster Pro]'
-            hex 'I/O base for Audio Excel DSP 16 220 or 240' \
-	                                           CONFIG_AEDSP16_BASE $CONFIG_SB_BASE
-            int 'Audio Excel DSP 16 IRQ 5, 7, 9, 10, 11' \
-	                                           CONFIG_AEDSP16_SB_IRQ $CONFIG_SB_IRQ
-            int 'Audio Excel DSP 16 DMA 0, 1 or 3' CONFIG_AEDSP16_SB_DMA $CONFIG_SB_DMA
-         fi
-      fi
-   
-      if [ "$CONFIG_MSS" = "y" -o "$CONFIG_MSS" = "m" -a "$CONFIG_AEDSP16_SBPRO" != "y" ]; then
-         bool 'Audio Excel DSP 16 (MSS emulation)' CONFIG_AEDSP16_MSS
-         if [ "$CONFIG_AEDSP16_MSS" = "y" ]; then
-	    comment 'Audio Excel DSP 16 [Microsoft Sound System]'
-	    hex 'I/O base for Audio Excel DSP 16 220 or 240' CONFIG_AEDSP16_BASE 220
-            int 'Audio Excel DSP 16 IRQ 5, 7, 9, 10, 11' \
-	                                           CONFIG_AEDSP16_MSS_IRQ $CONFIG_MSS_IRQ
-            int 'Audio Excel DSP 16 DMA 0, 1 or 3' CONFIG_AEDSP16_MSS_DMA $CONFIG_MSS_DMA
-         fi
-      fi
-
-      if [ "$CONFIG_MPU401" = "y" -o "$CONFIG_MPU401" = "m" ]; then
-         bool 'Audio Excel DSP 16 (MPU401 emulation)' CONFIG_AEDSP16_MPU401
-         if [ "$CONFIG_AEDSP16_MPU401" = "y" ]; then
-	    comment 'Audio Excel DSP 16 [MPU-401]'
-	    if [ "$CONFIG_AEDSP16_SBPRO" != "y" \
-	         -a "$CONFIG_AEDSP16_MSS" != "y" ]; then
-	       hex 'I/O base for Audio Excel DSP 16 220 or 240' CONFIG_AEDSP16_BASE 220
-	    fi
-            int 'MPU401 IRQ for Audio Excel DSP 16 5, 7, 9, 10 or 0 (disable)' \
-	    						CONFIG_AEDSP16_MPU_IRQ $CONFIG_MPU_IRQ
-         fi
-      fi
-   fi
-
-   if [ "$CONFIG_AEDSP16" = "y" -o "$CONFIG_AEDSP16" = "m" ]; then
-      comment 'SC-6600 Audio Cards have no jumper switches at all'
-      bool 'SC-6600 based audio cards (new Audio Excel DSP 16)' CONFIG_SC6600
-
-      if [ "$CONFIG_SC6600" = "y" ]; then
-         comment 'SC-6600 specific configuration'
-         bool 'Activate SC-6600 Joystick Interface' CONFIG_SC6600_JOY
-         int 'SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)' \
-	 					CONFIG_SC6600_CDROM 4
-         hex 'SC-6600 CDROM Interface I/O Address' CONFIG_SC6600_CDROMBASE 0
-      fi
-   fi
-fi
+# Additional low level drivers.
 
-if [ "$CONFIG_ARM" = "y" ]; then
-	bool 'VIDC 16-bit sound' CONFIG_VIDC_SOUND
+mainmenu_option next_comment
+comment 'Additional low level sound drivers'
+dep_tristate 'Additional low level sound drivers' CONFIG_LOWLEVEL_SOUND $CONFIG_SOUND
+if [ "$CONFIG_LOWLEVEL_SOUND" != "n" ]; then
+    source drivers/sound/lowlevel/Config.in
 fi
+endmenu