patch-pre2.0.12 linux/drivers/sound/Config.in

Next file: linux/fs/buffer.c
Previous file: linux/drivers/scsi/sr.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file pre2.0.11/linux/drivers/sound/Config.in linux/drivers/sound/Config.in
@@ -1,257 +1,12 @@
-bool 'ProAudioSpectrum 16 support' CONFIG_PAS
-bool 'SoundBlaster (SB, SBPro, SB16, clones) support' CONFIG_SB
-bool 'Generic OPL2/OPL3 FM synthesizer support' CONFIG_ADLIB
-bool 'Gravis Ultrasound support' CONFIG_GUS
-bool 'MPU-401 support (NOT for SB16)' CONFIG_MPU401
-bool '6850 UART Midi support' CONFIG_UART6850
-bool 'PSS (ECHO-ADI2111) support' CONFIG_PSS
-bool '16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_GUS16
-bool 'GUS MAX support' CONFIG_GUSMAX
-bool 'Microsoft Sound System support' CONFIG_MSS
-bool 'Ensoniq Soundscape support' CONFIG_SSCAPE
-bool 'MediaTriX AudioTriX Pro support' CONFIG_TRIX
-bool 'Support for MAD16 and/or Mozart based cards' CONFIG_MAD16
-bool 'Support for Crystal CS4232 based (PnP) cards' CONFIG_CS4232
-bool 'Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_MAUI
-bool '/dev/dsp and /dev/audio support' CONFIG_AUDIO
-bool 'MIDI interface support' CONFIG_MIDI
-bool 'FM synthesizer (YM3812/OPL-3) support' CONFIG_YM3812
-bool 'Support for SM Wave' CONFIG_SMWAVE
-
-if [ "$CONFIG_AEDSP16" = "y" ]; then
-hex 'I/O base for Audio Excel DSP 16 220 or 240' AEDSP16_BASE 220
-fi
-
-if [ "$CONFIG_SB" = "y" ]; then
-hex 'I/O base for SB Check from manual of the card' SBC_BASE 220
-fi
-
-if [ "$CONFIG_SB" = "y" ]; then
-int 'SoundBlaster IRQ Check from manual of the card' SBC_IRQ 7
-fi
-
-if [ "$CONFIG_SB" = "y" ]; then
-int 'SoundBlaster DMA 0, 1 or 3' SBC_DMA 1
-fi
-
-if [ "$CONFIG_SB" = "y" ]; then
-int 'SoundBlaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW) 5, 6 or 7' SB_DMA2 5
-fi
-
-if [ "$CONFIG_SB" = "y" ]; then
-hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card' SB_MPU_BASE 0
-fi
-
-if [ "$CONFIG_SB" = "y" ]; then
-int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Check from manual of the card' SB_MPU_IRQ -1
-fi
-
-if [ "$CONFIG_PAS" = "y" ]; then
-int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15' PAS_IRQ 10
-fi
-
-if [ "$CONFIG_PAS" = "y" ]; then
-int 'PAS16 DMA 0, 1, 3, 5, 6 or 7' PAS_DMA 3
-fi
-
-if [ "$CONFIG_GUS" = "y" ]; then
-hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' GUS_BASE 220
-fi
-
-if [ "$CONFIG_GUS" = "y" ]; then
-int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' GUS_IRQ 15
-fi
-
-if [ "$CONFIG_GUS" = "y" ]; then
-int 'GUS DMA 1, 3, 5, 6 or 7' GUS_DMA 6
-fi
-
-if [ "$CONFIG_GUS" = "y" ]; then
-int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' GUS_DMA2 -1
-fi
-
-if [ "$CONFIG_GUS16" = "y" ]; then
-hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' GUS16_BASE 530
-fi
-
-if [ "$CONFIG_GUS16" = "y" ]; then
-int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' GUS16_IRQ 7
-fi
-
-if [ "$CONFIG_GUS16" = "y" ]; then
-int 'GUS DMA 0, 1 or 3' GUS16_DMA 3
-fi
-
-if [ "$CONFIG_MPU401" = "y" ]; then
-hex 'I/O base for MPU401 Check from manual of the card' MPU_BASE 330
-fi
-
-if [ "$CONFIG_MPU401" = "y" ]; then
-int 'MPU401 IRQ Check from manual of the card' MPU_IRQ 9
-fi
-
-if [ "$CONFIG_MAUI" = "y" ]; then
-hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330' MAUI_BASE 330
-fi
-
-if [ "$CONFIG_MAUI" = "y" ]; then
-int 'Maui IRQ 5, 9, 12 or 15' MAUI_IRQ 9
-fi
-
-if [ "$CONFIG_UART6850" = "y" ]; then
-hex 'I/O base for UART 6850 MIDI port (Unknown)' U6850_BASE 0
-fi
-
-if [ "$CONFIG_UART6850" = "y" ]; then
-int 'UART6850 IRQ (Unknown)' U6850_IRQ -1
-fi
-
-if [ "$CONFIG_PSS" = "y" ]; then
-hex 'PSS I/O base 220 or 240' PSS_BASE 220
-fi
-
-if [ "$CONFIG_PSS" = "y" ]; then
-hex 'PSS audio I/O base 530, 604, E80 or F40' PSS_MSS_BASE 530
-fi
-
-if [ "$CONFIG_PSS" = "y" ]; then
-int 'PSS audio IRQ 7, 9, 10 or 11' PSS_MSS_IRQ 11
-fi
-
-if [ "$CONFIG_PSS" = "y" ]; then
-int 'PSS audio DMA 0, 1 or 3' PSS_MSS_DMA 3
-fi
-
-if [ "$CONFIG_PSS" = "y" ]; then
-hex 'PSS MIDI I/O base ' PSS_MPU_BASE 330
-fi
-
-if [ "$CONFIG_PSS" = "y" ]; then
-int 'PSS MIDI IRQ 3, 4, 5, 7 or 9' PSS_MPU_IRQ 9
-fi
-
-if [ "$CONFIG_MSS" = "y" ]; then
-hex 'MSS/WSS I/O base 530, 604, E80 or F40' MSS_BASE 530
-fi
-
-if [ "$CONFIG_MSS" = "y" ]; then
-int 'MSS/WSS IRQ 7, 9, 10 or 11' MSS_IRQ 11
-fi
-
-if [ "$CONFIG_MSS" = "y" ]; then
-int 'MSS/WSS DMA 0, 1 or 3' MSS_DMA 3
-fi
-
-if [ "$CONFIG_SSCAPE" = "y" ]; then
-hex 'Soundscape MIDI I/O base ' SSCAPE_BASE 330
-fi
-
-if [ "$CONFIG_SSCAPE" = "y" ]; then
-int 'Soundscape MIDI IRQ ' SSCAPE_IRQ 9
-fi
-
-if [ "$CONFIG_SSCAPE" = "y" ]; then
-int 'Soundscape initialization DMA 0, 1 or 3' SSCAPE_DMA 3
-fi
-
-if [ "$CONFIG_SSCAPE" = "y" ]; then
-hex 'Soundscape audio I/O base 534, 608, E84 or F44' SSCAPE_MSS_BASE 534
-fi
-
-if [ "$CONFIG_SSCAPE" = "y" ]; then
-int 'Soundscape audio IRQ 7, 9, 10 or 11' SSCAPE_MSS_IRQ 11
-fi
-
-if [ "$CONFIG_SSCAPE" = "y" ]; then
-int 'Soundscape audio DMA 0, 1 or 3' SSCAPE_MSS_DMA 0
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-hex 'AudioTriX audio I/O base 530, 604, E80 or F40' TRIX_BASE 530
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-int 'AudioTriX audio IRQ 7, 9, 10 or 11' TRIX_IRQ 11
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-int 'AudioTriX audio DMA 0, 1 or 3' TRIX_DMA 0
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-int 'AudioTriX second (duplex) DMA 0, 1 or 3' TRIX_DMA2 3
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-hex 'AudioTriX MIDI I/O base 330, 370, 3B0 or 3F0' TRIX_MPU_BASE 330
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-int 'AudioTriX MIDI IRQ 3, 4, 5, 7 or 9' TRIX_MPU_IRQ 9
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-hex 'AudioTriX SB I/O base 220, 210, 230, 240, 250, 260 or 270' TRIX_SB_BASE 220
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-int 'AudioTriX SB IRQ 3, 4, 5 or 7' TRIX_SB_IRQ 7
-fi
-
-if [ "$CONFIG_TRIX" = "y" ]; then
-int 'AudioTriX SB DMA 1 or 3' TRIX_SB_DMA 1
-fi
-
-if [ "$CONFIG_CS4232" = "y" ]; then
-hex 'CS4232 audio I/O base 530, 604, E80 or F40' CS4232_BASE 530
-fi
-
-if [ "$CONFIG_CS4232" = "y" ]; then
-int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15' CS4232_IRQ 11
-fi
-
-if [ "$CONFIG_CS4232" = "y" ]; then
-int 'CS4232 audio DMA 0, 1 or 3' CS4232_DMA 0
-fi
-
-if [ "$CONFIG_CS4232" = "y" ]; then
-int 'CS4232 second (duplex) DMA 0, 1 or 3' CS4232_DMA2 3
-fi
-
-if [ "$CONFIG_CS4232" = "y" ]; then
-hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0' CS4232_MPU_BASE 330
-fi
-
-if [ "$CONFIG_CS4232" = "y" ]; then
-int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15' CS4232_MPU_IRQ 9
-fi
-
-if [ "$CONFIG_MAD16" = "y" ]; then
-hex 'MAD16 audio I/O base 530, 604, E80 or F40' MAD16_BASE 530
-fi
-
-if [ "$CONFIG_MAD16" = "y" ]; then
-int 'MAD16 audio IRQ 7, 9, 10 or 11' MAD16_IRQ 11
-fi
-
-if [ "$CONFIG_MAD16" = "y" ]; then
-int 'MAD16 audio DMA 0, 1 or 3' MAD16_DMA 3
-fi
-
-if [ "$CONFIG_MAD16" = "y" ]; then
-int 'MAD16 second (duplex) DMA 0, 1 or 3' MAD16_DMA2 0
-fi
-
-if [ "$CONFIG_MAD16" = "y" ]; then
-hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)' MAD16_MPU_BASE 330
-fi
-
-if [ "$CONFIG_MAD16" = "y" ]; then
-int 'MAD16 MIDI IRQ 5, 7, 9 or 10' MAD16_MPU_IRQ 9
-fi
-
-if [ "$CONFIG_AUDIO" = "y" ]; then
-int 'Audio DMA buffer size 4096, 16384, 32768 or 65536' DSP_BUFFSIZE 65536
-fi
 #
-$MAKE -C drivers/sound kernelconfig || exit 1
+# Sound driver configuration
+#
+#--------
+# There is another config script which is compatible with rest of
+# the kernel. It can be activated by running 'make mkscript' in this
+# directory. Please note that this is an _experimental_ feature which
+# doesn't work with all cards (PSS, SM Wave, AudioTriX Pro).
+#--------
+#
+$MAKE -C drivers/sound config || exit 1
+

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this