patch-pre2.0.11 linux/drivers/scsi/Config.in

• Lines: 54
• Date: Sun Jun 2 13:40:39 1996
• Orig file: pre2.0.10/linux/drivers/scsi/Config.in
• Orig date: Mon May 20 08:21:02 1996

diff -u --recursive --new-file pre2.0.10/linux/drivers/scsi/Config.in linux/drivers/scsi/Config.in
@@ -14,16 +14,21 @@
 mainmenu_option next_comment
 comment 'SCSI low-level drivers'
 
-dep_tristate 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS $CONFIG_SCSI
+dep_tristate '7000FASST SCSI support' CONFIG_SCSI_7000FASST $CONFIG_SCSI
 dep_tristate 'Adaptec AHA152X support' CONFIG_SCSI_AHA152X $CONFIG_SCSI
 dep_tristate 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 $CONFIG_SCSI
 dep_tristate 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 $CONFIG_SCSI
 dep_tristate 'Adaptec AHA274X/284X/294X support' CONFIG_SCSI_AIC7XXX $CONFIG_SCSI
+dep_tristate 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS $CONFIG_SCSI
+dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI
+if [ "$CONFIG_PCI" = "y" ]; then
+  bool 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974
+fi
 dep_tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC $CONFIG_SCSI
 dep_tristate 'DTC3180/3280 SCSI support' CONFIG_SCSI_DTC3280 $CONFIG_SCSI
+dep_tristate 'EATA ISA/EISA (DPT PM2011/021/012/022/122/322) support' CONFIG_SCSI_EATA $CONFIG_SCSI
 dep_tristate 'EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix) support' CONFIG_SCSI_EATA_DMA $CONFIG_SCSI
 dep_tristate 'EATA-PIO (old DPT PM2001, PM2012A) support' CONFIG_SCSI_EATA_PIO $CONFIG_SCSI
-dep_tristate 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F $CONFIG_SCSI
 dep_tristate 'Future Domain 16xx SCSI support' CONFIG_SCSI_FUTURE_DOMAIN $CONFIG_SCSI
 dep_tristate 'Generic NCR5380/53c400 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 $CONFIG_SCSI
 if [ "$CONFIG_SCSI_GENERIC_NCR5380" != "n" ]; then
@@ -32,6 +37,7 @@
 		"Port CONFIG_SCSI_G_NCR5380_PORT \
 		Memory CONFIG_SCSI_G_NCR5380_MEM" Port
 fi
+dep_tristate 'NCR53c406a SCSI support' CONFIG_SCSI_NCR53C406A $CONFIG_SCSI
 if [ "$CONFIG_PCI" = "y" ]; then
   dep_tristate 'NCR53c7,8xx SCSI support'  CONFIG_SCSI_NCR53C7xx $CONFIG_SCSI
   if [ "$CONFIG_SCSI_NCR53C7xx" != "n" ]; then
@@ -40,7 +46,7 @@
     bool '   allow DISCONNECT' CONFIG_SCSI_NCR53C7xx_DISCONNECT
   fi
 fi
-dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI
+dep_tristate 'IOMEGA Parallel Port ZIP drive SCSI support' CONFIG_SCSI_PPA $CONFIG_SCSI
 dep_tristate 'PAS16 SCSI support' CONFIG_SCSI_PAS16 $CONFIG_SCSI
 dep_tristate 'Qlogic FAS SCSI support' CONFIG_SCSI_QLOGIC_FAS $CONFIG_SCSI
 if [ "$CONFIG_PCI" = "y" ]; then
@@ -50,11 +56,7 @@
 fi
 dep_tristate 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE $CONFIG_SCSI
 dep_tristate 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 $CONFIG_SCSI
+dep_tristate 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F $CONFIG_SCSI
 dep_tristate 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR $CONFIG_SCSI
-dep_tristate '7000FASST SCSI support' CONFIG_SCSI_7000FASST $CONFIG_SCSI
-dep_tristate 'EATA ISA/EISA (DPT PM2011/021/012/022/122/322) support' CONFIG_SCSI_EATA $CONFIG_SCSI
-dep_tristate 'NCR53c406a SCSI support' CONFIG_SCSI_NCR53C406A $CONFIG_SCSI
-dep_tristate 'IOMEGA Parallel Port ZIP drive SCSI support' CONFIG_SCSI_PPA $CONFIG_SCSI
-bool 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974
 #dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI
 endmenu