patch-1.3.98 linux/include/linux/scsi.h

Next file: linux/include/linux/scsicam.h
Previous file: linux/include/linux/random.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v1.3.97/linux/include/linux/scsi.h linux/include/linux/scsi.h
@@ -1,198 +0,0 @@
-#ifndef _LINUX_SCSI_H
-#define _LINUX_SCSI_H
-
-/*
- * This header file contains public constants and structures used by
- * the scsi code for linux.
- */
-
-/*
-    $Header: /usr/src/linux/include/linux/RCS/scsi.h,v 1.3 1993/09/24 12:20:33 drew Exp $
-
-    For documentation on the OPCODES, MESSAGES, and SENSE values,
-    please consult the SCSI standard.
-
-*/
-
-/*
- *      SCSI opcodes
- */
-
-#define TEST_UNIT_READY       0x00
-#define REZERO_UNIT           0x01
-#define REQUEST_SENSE         0x03
-#define FORMAT_UNIT           0x04
-#define READ_BLOCK_LIMITS     0x05
-#define REASSIGN_BLOCKS       0x07
-#define READ_6                0x08
-#define WRITE_6               0x0a
-#define SEEK_6                0x0b
-#define READ_REVERSE          0x0f
-#define WRITE_FILEMARKS       0x10
-#define SPACE                 0x11
-#define INQUIRY               0x12
-#define RECOVER_BUFFERED_DATA 0x14
-#define MODE_SELECT           0x15
-#define RESERVE               0x16
-#define RELEASE               0x17
-#define COPY                  0x18
-#define ERASE                 0x19
-#define MODE_SENSE            0x1a
-#define START_STOP            0x1b
-#define RECEIVE_DIAGNOSTIC    0x1c
-#define SEND_DIAGNOSTIC       0x1d
-#define ALLOW_MEDIUM_REMOVAL  0x1e
-
-#define SET_WINDOW            0x24
-#define READ_CAPACITY         0x25
-#define READ_10               0x28
-#define WRITE_10              0x2a
-#define SEEK_10               0x2b
-#define WRITE_VERIFY          0x2e
-#define VERIFY                0x2f
-#define SEARCH_HIGH           0x30
-#define SEARCH_EQUAL          0x31
-#define SEARCH_LOW            0x32
-#define SET_LIMITS            0x33
-#define PRE_FETCH             0x34
-#define READ_POSITION         0x34
-#define SYNCHRONIZE_CACHE     0x35
-#define LOCK_UNLOCK_CACHE     0x36
-#define READ_DEFECT_DATA      0x37
-#define MEDIUM_SCAN           0x38
-#define COMPARE               0x39
-#define COPY_VERIFY           0x3a
-#define WRITE_BUFFER          0x3b
-#define READ_BUFFER           0x3c
-#define UPDATE_BLOCK          0x3d
-#define READ_LONG             0x3e
-#define WRITE_LONG            0x3f
-#define CHANGE_DEFINITION     0x40
-#define WRITE_SAME            0x41
-#define LOG_SELECT            0x4c
-#define LOG_SENSE             0x4d
-#define MODE_SELECT_10        0x55
-#define MODE_SENSE_10         0x5a
-#define READ_12               0xa8
-#define WRITE_12              0xaa
-#define WRITE_VERIFY_12       0xae
-#define SEARCH_HIGH_12        0xb0
-#define SEARCH_EQUAL_12       0xb1
-#define SEARCH_LOW_12         0xb2
-#define SEND_VOLUME_TAG       0xb6
-#define WRITE_LONG_2          0xea
-
-/*
- *  Status codes
- */
-
-#define GOOD                 0x00
-#define CHECK_CONDITION      0x01
-#define CONDITION_GOOD       0x02
-#define BUSY                 0x04
-#define INTERMEDIATE_GOOD    0x08
-#define INTERMEDIATE_C_GOOD  0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define QUEUE_FULL           0x1a
-
-#define STATUS_MASK          0x1e
-
-/*
- *  SENSE KEYS
- */
-
-#define NO_SENSE            0x00
-#define RECOVERED_ERROR     0x01
-#define NOT_READY           0x02
-#define MEDIUM_ERROR        0x03
-#define HARDWARE_ERROR      0x04
-#define ILLEGAL_REQUEST     0x05
-#define UNIT_ATTENTION      0x06
-#define DATA_PROTECT        0x07
-#define BLANK_CHECK         0x08
-#define COPY_ABORTED        0x0a
-#define ABORTED_COMMAND     0x0b
-#define VOLUME_OVERFLOW     0x0d
-#define MISCOMPARE          0x0e
-
-
-/*
- *  DEVICE TYPES
- */
-
-#define TYPE_DISK           0x00
-#define TYPE_TAPE           0x01
-#define TYPE_PROCESSOR      0x03    /* HP scanners use this */
-#define TYPE_WORM           0x04    /* Treated as ROM by our system */
-#define TYPE_ROM            0x05
-#define TYPE_SCANNER        0x06
-#define TYPE_MOD            0x07    /* Magneto-optical disk - 
-				     * - treated as TYPE_DISK */
-#define TYPE_NO_LUN         0x7f
-
-
-/*
- *  MESSAGE CODES
- */
-
-#define COMMAND_COMPLETE    0x00
-#define EXTENDED_MESSAGE    0x01
-#define     EXTENDED_MODIFY_DATA_POINTER    0x00
-#define     EXTENDED_SDTR                   0x01
-#define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
-#define     EXTENDED_WDTR                   0x03
-#define SAVE_POINTERS       0x02
-#define RESTORE_POINTERS    0x03
-#define DISCONNECT          0x04
-#define INITIATOR_ERROR     0x05
-#define ABORT               0x06
-#define MESSAGE_REJECT      0x07
-#define NOP                 0x08
-#define MSG_PARITY_ERROR    0x09
-#define LINKED_CMD_COMPLETE 0x0a
-#define LINKED_FLG_CMD_COMPLETE 0x0b
-#define BUS_DEVICE_RESET    0x0c
-
-#define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
-#define RELEASE_RECOVERY    0x10            /* SCSI-II only */
-
-#define SIMPLE_QUEUE_TAG    0x20
-#define HEAD_OF_QUEUE_TAG   0x21
-#define ORDERED_QUEUE_TAG   0x22
-
-/*
- * Here are some scsi specific ioctl commands which are sometimes useful.
- */
-/* These are a few other constants  only used by scsi  devices */
-
-#define SCSI_IOCTL_GET_IDLUN 0x5382
-
-/* Used to turn on and off tagged queuing for scsi devices */
-
-#define SCSI_IOCTL_TAGGED_ENABLE 0x5383
-#define SCSI_IOCTL_TAGGED_DISABLE 0x5384
-
-/* Used to obtain the host number of a device. */
-#define SCSI_IOCTL_PROBE_HOST 0x5385
-
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4 
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */
-
-#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this