patch-1.3.5 linux/drivers/scsi/eata_dma_proc.c

• Lines: 410
• Date: Thu Jun 29 12:37:45 1995
• Orig file: v1.3.4/linux/drivers/scsi/eata_dma_proc.c
• Orig date: Thu Jan 1 02:00:00 1970

diff -u --recursive --new-file v1.3.4/linux/drivers/scsi/eata_dma_proc.c linux/drivers/scsi/eata_dma_proc.c
@@ -0,0 +1,409 @@
+
+#define MAX_SCSI_DEVICE_CODE 10
+const char *const scsi_dev_types[MAX_SCSI_DEVICE_CODE] =
+{
+    "Direct-Access    ",
+    "Sequential-Access",
+    "Printer          ",
+    "Processor        ",
+    "WORM             ",
+    "CD-ROM           ",
+    "Scanner          ",
+    "Optical Device   ",
+    "Medium Changer   ",
+    "Communications   "
+};
+
+
+void swap_statistics(u8 *p)
+{
+    u32 y;
+    u32 *lp, h_lp;
+    u16 *sp, h_sp;
+    u8 *bp;
+    
+    lp = (u32 *)p;
+    sp = ((short *)lp) + 1;         /* Convert Header */
+    h_sp = *sp = ntohs(*sp);
+    lp++;
+
+    do {
+	sp = (u16 *)lp;           /* Convert SubHeader */
+    *sp = ntohs(*sp);
+    bp = (u8 *) lp;
+    y = *(bp + 3);
+    lp++;
+    for (h_lp = (u32)lp; (u32)lp < h_lp + ((u32)*(bp + 3)); lp++)
+	*lp = ntohl(*lp);
+    }while ((u32)lp < ((u32)p) + 4 + h_sp);
+
+}
+
+/*
+ * eata_set_info
+ * buffer : pointer to the data that has been written to the hostfile
+ * length : number of bytes written to the hostfile
+ * HBA_ptr: pointer to the Scsi_Host struct
+ */
+int eata_set_info(char *buffer, int length, struct Scsi_Host *HBA_ptr)
+{
+    DBG(DBG_PROC_WRITE, printk("%s\n", buffer));
+    return(-ENOSYS);  /* Currently this is a no-op */
+}
+
+/*
+ * eata_proc_info
+ * inout : decides on the direction of the dataflow and the meaning of the variables
+ * buffer: If inout==FALSE data is beeing written to it else read from it
+ * *start: If inout==FALSE start of the valid data in the buffer
+ * offset: If inout==FALSE offset from the beginning of the imaginary file from which we start writing into the buffer
+ * length: If inout==FALSE max number of bytes to be written into the buffer else number of bytes in the buffer
+ */
+int eata_proc_info(char *buffer, char **start, off_t offset, int length, int hostno, int inout)
+{
+
+    Scsi_Device *scd;
+    struct Scsi_Host *HBA_ptr;
+    Scsi_Cmnd scmd;
+    static u8 buff[512];
+    static u8 buff2[512];
+    hst_cmd_stat *rhcs, *whcs;
+    coco         *cc;
+    scsitrans    *st;
+    scsimod      *sm;
+    hobu         *hb;
+    scbu         *sb;
+    boty         *bt;
+    memco        *mc;
+    firm         *fm;
+    subinf       *si; 
+    pcinf        *pi;
+    arrlim       *al;
+    int i, x; 
+    int   size, len = 0;
+    off_t begin = 0;
+    off_t pos = 0;
+
+    HBA_ptr = first_HBA;
+    for (i = 1; i <= registered_HBAs; i++) {
+	if (HBA_ptr->host_no == hostno)
+	    break;
+	HBA_ptr = SD(HBA_ptr)->next;
+    }        
+
+    if(inout == TRUE) /* Has data been writen to the file ? */ 
+	return(eata_set_info(buffer, length, HBA_ptr));
+
+    if (offset == 0)
+	memset(buff, 0, sizeof(buff));
+
+    cc = (coco *)     (buff + 0x148);
+    st = (scsitrans *)(buff + 0x164); 
+    sm = (scsimod *)  (buff + 0x16c);
+    hb = (hobu *)     (buff + 0x172);
+    sb = (scbu *)     (buff + 0x178);
+    bt = (boty *)     (buff + 0x17e);
+    mc = (memco *)    (buff + 0x186);
+    fm = (firm *)     (buff + 0x18e);
+    si = (subinf *)   (buff + 0x196); 
+    pi = (pcinf *)    (buff + 0x19c);
+    al = (arrlim *)   (buff + 0x1a2);
+
+    size = sprintf(buffer+len, "EATA (Extended Attachment) driver version: "
+		   "%d.%d%s\n",VER_MAJOR, VER_MINOR, VER_SUB);
+    len += size; pos = begin + len;
+    size = sprintf(buffer + len, "queued commands:     %10ld\n"
+		   "processed interrupts:%10ld\n", queue_counter, int_counter);
+    len += size; pos = begin + len;
+
+    if(SD(HBA_ptr)->bustype == IS_EISA)
+	goto devices;
+    
+    scmd.cmnd[0] = LOG_SENSE;
+    scmd.cmnd[1] = 0;
+    scmd.cmnd[2] = 0x33 + (3<<6);
+    scmd.cmnd[3] = 0;
+    scmd.cmnd[4] = 0;
+    scmd.cmnd[5] = 0;
+    scmd.cmnd[6] = 0;
+    scmd.cmnd[7] = 0x00;
+    scmd.cmnd[8] = 0x66;
+    scmd.cmnd[9] = 0;
+    scmd.cmd_len = 10;
+    
+    scmd.host = HBA_ptr; 
+    scmd.target = HBA_ptr->this_id; 
+    scmd.lun = 0; 
+    scmd.channel = 0;
+    
+    scmd.use_sg = 0;
+    scmd.request_bufflen = 0x66;
+    scmd.request_buffer = buff + 0x144;
+    HBA_interpret = TRUE;
+    
+    eata_queue(&scmd, (void *) eata_scsi_done);
+    while (internal_command_finished == FALSE)
+	barrier();
+    
+    size = sprintf(buffer + len, "\nscsi%-2d: HBA %.10s\n",
+		   HBA_ptr->host_no, SD(HBA_ptr)->name);
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "Firmware revision: v%s\n", 
+		   SD(HBA_ptr)->revision);
+    len += size;
+    pos = begin + len;
+    size = sprintf(buffer + len, "Hardware Configuration:\n");
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "IRQ: %2d, %s triggered\n", cc->interrupt,
+		   (cc->intt == TRUE)?"level":"edge");
+    len += size; 
+    pos = begin + len;
+    if (HBA_ptr->dma_channel == 0xff)
+	size = sprintf(buffer + len, "DMA: BUSMASTER\n");
+    else
+	size = sprintf(buffer + len, "DMA: %d\n", HBA_ptr->dma_channel);
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "CPU: MC680%02d %dMHz\n", bt->cpu_type,
+		   bt->cpu_speed);
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "Base IO : %#.4x\n", (u32) HBA_ptr->base);
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "Host Bus: %s\n", 
+		   (SD(HBA_ptr)->bustype == IS_PCI)?"PCI ":
+		   (SD(HBA_ptr)->bustype == IS_EISA)?"EISA":"ISA ");
+    
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "SCSI Bus:%s%s Speed: %sMB/sec. %s\n",
+		   (sb->wide == TRUE)?" WIDE":"", 
+		   (sb->dif == TRUE)?" DIFFERENTIAL":"",
+		   (sb->speed == 0)?"5":(sb->speed == 1)?"10":"20",
+		   (sb->ext == TRUE)?"With external cable detection":"");
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "SCSI channel expansion Module: %s installed\n",
+		   (bt->sx1 == TRUE)?"SX1 (one channel)":
+		   ((bt->sx2 == TRUE)?"SX2 (two channels)":"not"));
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "SmartRAID hardware: %spresent.\n",
+		   (cc->srs == TRUE)?"":"not ");
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "    Type: %s\n",
+		   ((cc->key == TRUE)?((bt->dmi == TRUE)?"integrated"
+				       :((bt->dm4 == TRUE)?"DM401X"
+				       :(bt->dm4k == TRUE)?"DM4000"
+				       :"-"))
+				       :"-"));
+    len += size; 
+    pos = begin + len;
+    
+    size = sprintf(buffer + len, "    Max array groups:              %d\n",
+		   (al->code == 0x0e)?al->max_groups:7);
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "    Max drives per RAID 0 array:   %d\n",
+		   (al->code == 0x0e)?al->raid0_drv:7);
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "    Max drives per RAID 3/5 array: %d\n",
+		   (al->code == 0x0e)?al->raid35_drv:7);
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "Cache Module: %sinstalled.\n",
+		   (cc->csh)?"":"not ");
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "    Type: %s\n",
+		   ((cc->csh == TRUE)?((bt->cmi == TRUE)?"integrated"
+				       :((bt->cm4 == TRUE)?"CM401X"
+				       :((bt->cm4k == TRUE)?"CM4000"
+				       :"-")))
+				       :"-"));
+    len += size; 
+    pos = begin + len;
+    for (x = 0; x <= 3; x++) {
+	size = sprintf(buffer + len, "    Bank%d: %dMB with%s ECC\n",x,
+		       mc->banksize[x] & 0x7f, 
+		       (mc->banksize[x] & 0x80)?"":"out");
+	len += size; 
+	pos = begin + len;      
+    }   
+    size = sprintf(buffer + len, "Timer Modification: %sinstalled\n",
+		   (cc->tmr == TRUE)?"":"not ");
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "NVRAM: %spresent\n",
+		   (cc->nvr == TRUE)?"":"not ");
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "SmartROM: %senabled\n",
+		   (bt->srom == TRUE)?"not ":"");
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer + len, "HBA indicates %salarm.\n",
+		   (bt->alrm == TRUE)?"":"no ");
+    len += size; 
+    pos = begin + len;
+    
+    if (pos < offset) {
+	len = 0;
+	begin = pos;
+    }
+    if (pos > offset + length)
+	goto stop_output; 
+    
+    scmd.cmnd[0] = LOG_SENSE;
+    scmd.cmnd[1] = 0;
+    scmd.cmnd[2] = 0x32 + (3<<6); 
+    scmd.cmnd[3] = 0;
+    scmd.cmnd[4] = 0;
+    scmd.cmnd[5] = 0;
+    scmd.cmnd[6] = 0;
+    scmd.cmnd[7] = 0x01;
+    scmd.cmnd[8] = 0x44;
+    scmd.cmnd[9] = 0;
+    scmd.cmd_len = 10;
+    scmd.host = HBA_ptr; 
+    scmd.target = HBA_ptr->this_id; 
+    scmd.lun = 0; 
+    scmd.channel = 0;
+    scmd.use_sg = 0;
+    scmd.request_bufflen = 0x144;
+    scmd.request_buffer = buff2;
+    HBA_interpret = TRUE;
+    
+    eata_queue(&scmd, (void *) eata_scsi_done);
+    while (internal_command_finished == FALSE)
+	barrier();
+    
+    swap_statistics(buff2);
+    rhcs = (hst_cmd_stat *)(buff2 + 0x2c); 
+    whcs = (hst_cmd_stat *)(buff2 + 0x8c);           
+    
+    for (x = 0; x <= 11; x++) {
+	SD(HBA_ptr)->reads[x] += rhcs->sizes[x];
+	SD(HBA_ptr)->writes[x] += whcs->sizes[x];
+	SD(HBA_ptr)->reads[12] += rhcs->sizes[x];
+	SD(HBA_ptr)->writes[12] += whcs->sizes[x];
+    }
+    size = sprintf(buffer + len, "Host Disk Command Statistics:\n"
+		   "         Reads:      Writes:\n");
+    len += size; 
+    pos = begin + len;
+    for (x = 0; x <= 10; x++) {
+	size = sprintf(buffer+len,"%5dk:%12u %12u\n", 1 << x,
+		       SD(HBA_ptr)->reads[x], 
+		       SD(HBA_ptr)->writes[x]);
+	len += size; 
+	pos = begin + len;
+    }
+    size = sprintf(buffer+len,">1024k:%12u %12u\n",
+		   SD(HBA_ptr)->reads[11], 
+		   SD(HBA_ptr)->writes[11]);
+    len += size; 
+    pos = begin + len;
+    size = sprintf(buffer+len,"Sum   :%12u %12u\n",
+		   SD(HBA_ptr)->reads[12], 
+		   SD(HBA_ptr)->writes[12]);
+    len += size; 
+    pos = begin + len;
+    
+    if (pos < offset) {
+	len = 0;
+	begin = pos;
+    }
+    if (pos > offset + length)
+	goto stop_output;
+
+ devices:    
+    scd = scsi_devices;
+    
+    size = sprintf(buffer+len,"Attached devices: %s\n", (scd)?"":"none");
+    len += size; 
+    pos = begin + len;
+    
+    while (scd) {
+	if (scd->host == HBA_ptr) {
+	    
+	    size = sprintf(buffer + len, "Channel: %02d Id: %02d Lun: %02d\n  Vendor: ",
+			   scd->channel, scd->id, scd->lun);
+	    for (x = 0; x < 8; x++) {
+		if (scd->vendor[x] >= 0x20)
+		    size += sprintf(buffer + len + size, "%c", scd->vendor[x]);
+		else
+		    size += sprintf(buffer + len + size," ");
+	    }
+	    size += sprintf(buffer + len + size, " Model: ");
+	    for (x = 0; x < 16; x++) {
+		if (scd->model[x] >= 0x20)
+		    size +=  sprintf(buffer + len + size, "%c", scd->model[x]);
+		else
+		    size += sprintf(buffer + len + size, " ");
+	    }
+	    size += sprintf(buffer + len + size, " Rev: ");
+	    for (x = 0; x < 4; x++) {
+		if (scd->rev[x] >= 0x20)
+		    size += sprintf(buffer + len + size, "%c", scd->rev[x]);
+		else
+		    size += sprintf(buffer + len + size, " ");
+	    }
+	    size += sprintf(buffer + len + size, "\n");
+	    
+	    size += sprintf(buffer + len + size, "  Type:   %s ",
+			    scd->type < MAX_SCSI_DEVICE_CODE ? 
+			    scsi_dev_types[(int)scd->type] : "Unknown          " );
+	    size += sprintf(buffer + len + size, "               ANSI"
+			    " SCSI revision: %02x", (scd->scsi_level < 3)?1:2);
+	    if (scd->scsi_level == 2)
+		size += sprintf(buffer + len + size, " CCS\n");
+	    else
+		size += sprintf(buffer + len + size, "\n");
+	    len += size; 
+	    pos = begin + len;
+	    
+	    if (pos < offset) {
+		len = 0;
+		begin = pos;
+	    }
+	    if (pos > offset + length)
+		goto stop_output;
+	}
+	scd = scd->next;
+    }
+    
+ stop_output:
+    DBG(DBG_PROC, printk("2pos: %ld offset: %ld len: %d\n", pos, offset, len));
+    *start=buffer+(offset-begin);   /* Start of wanted data */
+    len-=(offset-begin);            /* Start slop */
+    if(len>length)
+	len = length;               /* Ending slop */
+    DBG(DBG_PROC, printk("3pos: %ld offset: %ld len: %d\n", pos, offset, len));
+    
+    return (len);     
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */