patch-1.3.48 linux/include/asm-mips/ioctls.h

• Lines: 300
• Date: Wed Dec 13 12:39:45 1995
• Orig file: v1.3.47/linux/include/asm-mips/ioctls.h
• Orig date: Thu Jan 1 02:00:00 1970

diff -u --recursive --new-file v1.3.47/linux/include/asm-mips/ioctls.h linux/include/asm-mips/ioctls.h
@@ -0,0 +1,299 @@
+#ifndef __ASM_MIPS_IOCTLS_H
+#define __ASM_MIPS_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define TCGETA		0x5401
+#define TCSETA		0x5402
+#define TCSETAW		0x5403
+#define TCSETAF		0x5404
+
+#define TCSBRK		0x5405
+#define TCXONC		0x5406
+#define TCFLSH		0x5407
+
+#define TCGETS		0x540d
+#define TCSETS		0x540e
+#define TCSETSW		0x540f
+#define TCSETSF		0x5410
+
+#define TIOCEXCL	0x740d		/* set exclusive use of tty */
+#define TIOCNXCL	0x740e		/* reset exclusive use of tty */
+#define TIOCOUTQ	0x7472		/* output queue size */
+#define TIOCSTI		0x5472		/* simulate terminal input */
+#define TIOCMGET	0x741d		/* get all modem bits */
+#define TIOCMBIS	0x741b		/* bis modem bits */
+#define TIOCMBIC	0x741c		/* bic modem bits */
+#define TIOCMSET	0x741a		/* set all modem bits */
+#define TIOCPKT		0x5470		/* pty: set/clear packet mode */
+#define		TIOCPKT_DATA		0x00	/* data packet */
+#define		TIOCPKT_FLUSHREAD	0x01	/* flush packet */
+#define		TIOCPKT_FLUSHWRITE	0x02	/* flush packet */
+#define		TIOCPKT_STOP		0x04	/* stop output */
+#define		TIOCPKT_START		0x08	/* start output */
+#define		TIOCPKT_NOSTOP		0x10	/* no more ^S, ^Q */
+#define		TIOCPKT_DOSTOP		0x20	/* now do ^S ^Q */
+#if 0
+#define		TIOCPKT_IOCTL		0x40	/* state change of pty driver */
+#endif
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)	/* set window size */
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)	/* get window size */
+#define TIOCNOTTY	0x5471		/* void tty association */
+#define TIOCSETD	0x7401
+#define TIOCGETD	0x7400
+
+#define FIOCLEX		0x6601
+#define FIONCLEX	0x6602		/* these numbers need to be adjusted. */
+#define FIOASYNC	0x667d
+#define FIONBIO		0x667e
+
+						/* 116-117 compat */
+#define TIOCSPGRP	_IOW('t', 118, int)	/* set pgrp of tty */
+#define TIOCGPGRP	_IOR('t', 119, int)	/* get pgrp of tty */
+#define TIOCCONS	_IOW('t', 120, int)	/* become virtual console */
+
+#define FIONREAD	0x467f
+#define TIOCINQ		FIONREAD
+
+#if 0
+#define	TIOCSETA	_IOW('t', 20, struct termios) /* set termios struct */
+#define	TIOCSETAW	_IOW('t', 21, struct termios) /* drain output, set */
+#define	TIOCSETAF	_IOW('t', 22, struct termios) /* drn out, fls in, set */
+#define	TIOCGETD	_IOR('t', 26, int)	/* get line discipline */
+#define	TIOCSETD	_IOW('t', 27, int)	/* set line discipline */
+						/* 127-124 compat */
+#endif
+
+/* I hope the range from 0x5480 on is free ... */
+#define TIOCSCTTY	0x5480		/* become controlling tty */
+#define TIOCGSOFTCAR	0x5481
+#define TIOCSSOFTCAR	0x5482
+#define TIOCLINUX	0x5483
+#define TIOCGSERIAL	0x5484
+#define TIOCSSERIAL	0x5485
+
+#define TCSBRKP		0x5486	/* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT	0x5487  /* For debugging only */
+
+#define TIOCSERCONFIG	0x5488
+#define TIOCSERGWILD	0x5489
+#define TIOCSERSWILD	0x548a
+#define TIOCGLCKTRMIOS	0x548b
+#define TIOCSLCKTRMIOS	0x548c
+#define TIOCSERGSTRUCT	0x548d /* For debugging only */
+#define TIOCSERGETLSR   0x548e /* Get line status register */
+#define TIOCSERGETMULTI 0x548f /* Get multiport config  */
+#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
+
+/* ----------------------------------------------------------------------- */
+
+/* c_cc characters */
+#define VINTR		 0		/* Interrupt character [ISIG].  */
+#define VQUIT		 1		/* Quit character [ISIG].  */
+#define VERASE		 2		/* Erase character [ICANON].  */
+#define VKILL		 3		/* Kill-line character [ICANON].  */
+#define VEOF		 4		/* End-of-file character [ICANON].  */
+#define VMIN		VEOF		/* Minimum number of bytes read at once [!ICANON].  */
+#define VEOL		 5		/* End-of-line character [ICANON].  */
+#define VTIME		VEOL		/* Time-out value (tenths of a second) [!ICANON].  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define VEOL2		 6		/* Second EOL character [ICANON].  */
+/* The next two are guesses ... */
+#define VSWTC		 7		/* ??? */
+#endif
+#define VSWTCH		VSWTC
+#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF].  */
+#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF].  */
+#define VSUSP		10		/* Suspend character [ISIG].  */
+#if 0
+/*
+ * VDSUSP is not supported
+ */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define VDSUSP		11		/* Delayed suspend character [ISIG].  */
+#endif
+#endif
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define VREPRINT	12		/* Reprint-line character [ICANON].  */
+#endif
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define VDISCARD	13		/* Discard character [IEXTEN].  */
+#define VWERASE		14		/* Word-erase character [ICANON].  */
+#define VLNEXT		15		/* Literal-next character [IEXTEN].  */
+#endif
+/*
+ * 17 - 19 are reserved
+ */
+
+#ifdef __KERNEL__
+/*
+ *	intr=^C		quit=^|		erase=del	kill=^U
+ *	eof=^D		eol=time=\0	eol2=\0		swtc=\0
+ *	start=^Q	stop=^S		susp=^Z		vdsusp=
+ *	reprint=^R	discard=^U	werase=^W	lnext=^V
+ */
+#define INIT_C_CC "\003\034\177\025\004\0\0\0\021\023\032\0\022\017\027\026"
+#endif
+
+/* c_iflag bits */
+#define IGNBRK	0000001		/* Ignore break condition.  */
+#define BRKINT	0000002		/* Signal interrupt on break.  */
+#define IGNPAR	0000004		/* Ignore characters with parity errors.  */
+#define PARMRK	0000010		/* Mark parity and framing errors.  */
+#define INPCK	0000020		/* Enable input parity check.  */
+#define ISTRIP	0000040		/* Strip 8th bit off characters.  */
+#define INLCR	0000100		/* Map NL to CR on input.  */
+#define IGNCR	0000200		/* Ignore CR.  */
+#define ICRNL	0000400		/* Map CR to NL on input.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define IUCLC	0001000		/* Map upper case to lower case on input.  */
+#endif
+#define IXON	0002000		/* Enable start/stop output control.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define IXANY	0004000		/* Any character will restart after stop.  */
+#endif
+#define IXOFF	0010000		/* Enable start/stop input control.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define IMAXBEL	0020000		/* Ring bell when input queue is full.  */
+#endif
+
+/* c_oflag bits */
+#define OPOST	0000001		/* Perform output processing.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define OLCUC	0000002		/* Map lower case to upper case on output.  */
+#define ONLCR	0000004		/* Map NL to CR-NL on output.  */
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+/*
+#define PAGEOUT ???
+#define WRAP    ???
+ */
+#endif
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060		/* Number of bits per byte (mask).  */
+#define   CS5	0000000		/* 5 bits per byte.  */
+#define   CS6	0000020		/* 6 bits per byte.  */
+#define   CS7	0000040		/* 7 bits per byte.  */
+#define   CS8	0000060		/* 8 bits per byte.  */
+#define CSTOPB	0000100		/* Two stop bits instead of one.  */
+#define CREAD	0000200		/* Enable receiver.  */
+#define PARENB	0000400		/* Parity enable.  */
+#define PARODD	0001000		/* Odd parity instead of even.  */
+#define HUPCL	0002000		/* Hang up on last close.  */
+#define CLOCAL	0004000		/* Ignore modem status lines.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define CBAUDEX 0010000
+#define  B57600  0010001
+#define  B115200 0010002
+#define  B230400 0010003
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CRTSCTS	  020000000000		/* flow control */
+#endif
+
+/* c_lflag bits */
+#define ISIG	0000001		/* Enable signals.  */
+#define ICANON	0000002		/* Do erase and kill processing.  */
+#define XCASE	0000004
+#define ECHO	0000010		/* Enable echo.  */
+#define ECHOE	0000020		/* Visual erase for ERASE.  */
+#define ECHOK	0000040		/* Echo NL after KILL.  */
+#define ECHONL	0000100		/* Echo NL even if ECHO is off.  */
+#define NOFLSH	0000200		/* Disable flush after interrupt.  */
+#define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define ECHOCTL	0001000		/* Echo control characters as ^X.  */
+#define ECHOPRT	0002000		/* Hardcopy visual erase.  */
+#define ECHOKE	0004000		/* Visual erase for KILL.  */
+#endif
+#define FLUSHO	0020000
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define PENDIN	0040000		/* Retype pending input (state).  */
+#endif
+#define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
+#define ITOSTOP	TOSTOP
+
+/* modem lines */
+#define TIOCM_LE	0x001		/* line enable */
+#define TIOCM_DTR	0x002		/* data terminal ready */
+#define TIOCM_RTS	0x004		/* request to send */
+#define TIOCM_ST	0x010		/* secondary transmit */
+#define TIOCM_SR	0x020		/* secondary receive */
+#define TIOCM_CTS	0x040		/* clear to send */
+#define TIOCM_CAR	0x100		/* carrier detect */
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RNG	0x200		/* ring */
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_DSR	0x400		/* data set ready */
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0	/* Suspend output.  */
+#define	TCOON		1	/* Restart suspended output.  */
+#define	TCIOFF		2	/* Send a STOP character.  */
+#define	TCION		3	/* Send a START character.  */
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0	/* Discard data received but not yet read.  */
+#define	TCOFLUSH	1	/* Discard data written but not yet sent.  */
+#define	TCIOFLUSH	2	/* Discard all pending data.  */
+
+/* tcsetattr uses these */
+#define	TCSANOW		TCSETS	/* Change immediately.  */
+#define	TCSADRAIN	TCSETSW	/* Change when pending output is written.  */
+#define	TCSAFLUSH	TCSETSF	/* Flush pending input before changing.  */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+
+#endif /* __ASM_MIPS_IOCTLS_H */