patch-1.3.36 linux/drivers/block/sbpcd.c

Next file: linux/drivers/block/sbpcd2.c
Previous file: linux/drivers/block/ramdisk.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v1.3.35/linux/drivers/block/sbpcd.c linux/drivers/block/sbpcd.c
@@ -1,5422 +0,0 @@
-/*
- *  sbpcd.c   CD-ROM device driver for the whole family of IDE-style
- *            Kotobuki/Matsushita/Panasonic CR-5xx drives for
- *            SoundBlaster ("Pro" or "16 ASP" or compatible) cards
- *            and for "no-sound" interfaces like Lasermate and the
- *            Panasonic CI-101P.
- *            Also for the Longshine LCS-7260 drive.
- *            Also for the IBM "External ISA CD-Rom" drive.
- *            Also for the CreativeLabs CD200 drive (but I still need some
- *            detailed bug reports).
- *            Also for the TEAC CD-55A drive.
- *            Not for Sanyo drives (but sjcd is there...).
- *            Not for any other Funai drives than E2550UA (="CD200" with "F").
- *
- *  NOTE:     This is release 3.9.
- *
- *  VERSION HISTORY
- *
- *  0.1  initial release, April/May 93, after mcd.c (Martin Harriss)
- *
- *  0.2  the "repeat:"-loop in do_sbpcd_request did not check for
- *       end-of-request_queue (resulting in kernel panic).
- *       Flow control seems stable, but throughput is not better.  
- *
- *  0.3  interrupt locking totally eliminated (maybe "inb" and "outb"
- *       are still locking) - 0.2 made keyboard-type-ahead losses.
- *       check_sbpcd_media_change added (to use by isofs/inode.c)
- *       - but it detects almost nothing.
- *
- *  0.4  use MAJOR 25 definitely.
- *       Almost total re-design to support double-speed drives and
- *       "naked" (no sound) interface cards ("LaserMate" interface type).
- *       Flow control should be exact now.
- *       Don't occupy the SbPro IRQ line (not needed either); will
- *       live together with Hannu Savolainen's sndkit now.
- *	 Speeded up data transfer to 150 kB/sec, with help from Kai
- *       Makisara, the "provider" of the "mt" tape utility.
- *       Give "SpinUp" command if necessary.
- *       First steps to support up to 4 drives (but currently only one).
- *       Implemented audio capabilities - workman should work, xcdplayer
- *       gives some problems.
- *       This version is still consuming too much CPU time, and
- *       sleeping still has to be worked on.
- *       During "long" implied seeks, it seems possible that a 
- *       ReadStatus command gets ignored. That gives the message
- *       "ResponseStatus timed out" (happens about 6 times here during
- *       a "ls -alR" of the YGGDRASIL LGX-Beta CD). Such a case is
- *       handled without data error, but it should get done better.
- *
- *  0.5  Free CPU during waits (again with help from Kai Makisara).
- *       Made it work together with the LILO/kernel setup standard.
- *       Included auto-probing code, as suggested by YGGDRASIL.
- *       Formal redesign to add DDI debugging.
- *       There are still flaws in IOCTL (workman with double speed drive).
- *
- *  1.0  Added support for all drive IDs (0...3, no longer only 0)
- *       and up to 4 drives on one controller.
- *       Added "#define MANY_SESSION" for "old" multi session CDs.
- *
- *  1.1  Do SpinUp for new drives, too.
- *       Revised for clean compile under "old" kernels (0.99pl9).
- *
- *  1.2  Found the "workman with double-speed drive" bug: use the driver's
- *       audio_state, not what the drive is reporting with ReadSubQ.
- *
- *  1.3  Minor cleanups.
- *       Refinements regarding Workman.
- *
- *  1.4  Read XA disks (PhotoCDs) with "old" drives, too (but only the first
- *       session - no chance to fully access a "multi-session" CD).
- *       This currently still is too slow (50 kB/sec) - but possibly
- *       the old drives won't do it faster.
- *       Implemented "door (un)lock" for new drives (still does not work
- *       as wanted - no lock possible after an unlock).
- *       Added some debugging printout for the UPC/EAN code - but my drives 
- *       return only zeroes. Is there no UPC/EAN code written?
- *
- *  1.5  Laborate with UPC/EAN code (not better yet).
- *       Adapt to kernel 1.1.8 change (have to explicitly include
- *       <linux/string.h> now).
- *
- *  1.6  Trying to read audio frames as data. Impossible with the current
- *       drive firmware levels, as it seems. Awaiting any hint. ;-)
- *       Changed "door unlock": repeat it until success.
- *       Changed CDROMSTOP routine (stop somewhat "softer" so that Workman
- *       won't get confused).
- *       Added a third interface type: Sequoia S-1000, as used with the SPEA
- *       Media FX sound card. This interface (usable for Sony and Mitsumi 
- *       drives, too) needs a special configuration setup and behaves like a 
- *       LaserMate type after that. Still experimental - I do not have such
- *       an interface.
- *       Use the "variable BLOCK_SIZE" feature (2048). But it does only work
- *       if you give the mount option "block=2048".
- *       The media_check routine is currently disabled; now that it gets
- *       called as it should I fear it must get synchronized for not to
- *       disturb the normal driver's activity.
- *
- *  2.0  Version number bumped - two reasons:
- *       - reading audio tracks as data works now with CR-562 and CR-563. We
- *       currently do it by an IOCTL (yet has to get standardized), one frame
- *       at a time; that is pretty slow. But it works.
- *       - we are maintaining now up to 4 interfaces (each up to 4 drives):
- *       did it the easy way - a different MAJOR (25, 26, ...) and a different
- *       copy of the driver (sbpcd.c, sbpcd2.c, sbpcd3.c, sbpcd4.c - only
- *       distinguished by the value of SBPCD_ISSUE and the driver's name),
- *       and a common sbpcd.h file.
- *       Bettered the "ReadCapacity error" problem with old CR-52x drives (the
- *       drives sometimes need a manual "eject/insert" before work): just
- *       reset the drive and do again. Needs lots of resets here and sometimes
- *       that does not cure, so this can't be the solution.
- *
- *  2.1  Found bug with multisession CDs (accessing frame 16).
- *       "read audio" works now with address type CDROM_MSF, too.
- *       Bigger audio frame buffer: allows reading max. 4 frames at time; this
- *       gives a significant speedup, but reading more than one frame at once
- *       gives missing chunks at each single frame boundary.
- *
- *  2.2  Kernel interface cleanups: timers, init, setup, media check.
- *
- *  2.3  Let "door lock" and "eject" live together.
- *       Implemented "close tray" (done automatically during open).
- *
- *  2.4  Use different names for device registering.
- *
- *  2.5  Added "#if EJECT" code (default: enabled) to automatically eject
- *       the tray during last call to "sbpcd_release".
- *       Added "#if JUKEBOX" code (default: disabled) to automatically eject
- *       the tray during call to "sbpcd_open" if no disk is in.
- *       Turn on the CD volume of "compatible" sound cards, too; just define
- *       SOUND_BASE (in sbpcd.h) accordingly (default: disabled).
- *
- *  2.6  Nothing new.  
- *
- *  2.7  Added CDROMEJECT_SW ioctl to set the "EJECT" behavior on the fly:
- *       0 disables, 1 enables auto-ejecting. Useful to keep the tray in
- *       during shutdown.
- *
- *  2.8  Added first support (still BETA, I need feedback or a drive) for
- *       the Longshine LCS-7260 drives. They appear as double-speed drives
- *       using the "old" command scheme, extended by tray control and door
- *       lock functions.
- *       Found (and fixed preliminary) a flaw with some multisession CDs: we
- *       have to re-direct not only the accesses to frame 16 (the isofs
- *       routines drive it up to max. 100), but also those to the continuation
- *       (repetition) frames (as far as they exist - currently set fix as
- *       16..20).
- *       Changed default of the "JUKEBOX" define. If you use this default,
- *       your tray will eject if you try to mount without a disk in. Next
- *       mount command will insert the tray - so, just fill in a disk. ;-)
- *
- *  2.9  Fulfilled the Longshine LCS-7260 support; with great help and
- *       experiments by Serge Robyns.
- *       First attempts to support the TEAC CD-55A drives; but still not
- *       usable yet.
- *       Implemented the CDROMMULTISESSION ioctl; this is an attempt to handle
- *       multi session CDs more "transparent" (redirection handling has to be
- *       done within the isofs routines, and only for the special purpose of
- *       obtaining the "right" volume descriptor; accesses to the raw device
- *       should not get redirected).
- *
- *  3.0  Just a "normal" increment, with some provisions to do it better. ;-)
- *       Introduced "#define READ_AUDIO" to specify the maximum number of 
- *       audio frames to grab with one request. This defines a buffer size
- *       within kernel space; a value of 0 will reserve no such space and
- *       disable the CDROMREADAUDIO ioctl. A value of 75 enables the reading
- *       of a whole second with one command, but will use a buffer of more
- *       than 172 kB.
- *       Started CD200 support. Drive detection should work, but nothing
- *       more.
- *
- *  3.1  Working to support the CD200 and the Teac CD-55A drives.
- *       AT-BUS style device numbering no longer used: use SCSI style now.
- *       So, the first "found" device has MINOR 0, regardless of the
- *       jumpered drive ID. This implies modifications to the /dev/sbpcd*
- *       entries for some people, but will help the DAU (german TLA, english:
- *       "newbie", maybe ;-) to install his "first" system from a CD.
- *
- *  3.2  Still testing with CD200 and CD-55A drives.
- *
- *  3.3  Working with CD200 support.
- *
- *  3.4  Auto-probing stops if an address of 0 is seen (to be entered with
- *       the kernel command line).
- *       Made the driver "loadable". If used as a module, "audio copy" is
- *       disabled, and the internal read ahead data buffer has a reduced size
- *       of 4 kB; so, throughput may be reduced a little bit with slow CPUs.
- *
- *  3.5  Provisions to handle weird photoCDs which have an interrupted
- *       "formatting" immediately after the last frames of some files: simply
- *       never "read ahead" with MultiSession CDs. By this, CPU usage may be
- *       increased with those CDs, and there may be a loss in speed.
- *       Re-structured the messaging system.
- *       The "loadable" version no longer has a limited READ_AUDIO buffer
- *       size.
- *       Removed "MANY_SESSION" handling for "old" multi session CDs.
- *       Added "private" IOCTLs CDROMRESET and CDROMVOLREAD.
- *       Started again to support the TEAC CD-55A drives, now that I found
- *       the money for "my own" drive. ;-)
- *       The TEAC CD-55A support is fairly working now.
- *       I have measured that the drive "delivers" at 600 kB/sec (even with
- *       bigger requests than the drive's 64 kB buffer can satisfy), but
- *       the "real" rate does not exceed 520 kB/sec at the moment. 
- *       Caused by the various changes to build in TEAC support, the timed
- *       loops are de-optimized at the moment (less throughput with CR-52x
- *       drives, and the TEAC will give speed only with SBP_BUFFER_FRAMES 64).
- *
- *  3.6  Fixed TEAC data read problems with SbPro interfaces.
- *       Initial size of the READ_AUDIO buffer is 0. Can get set to any size
- *       during runtime.
- *
- *  3.7  Introduced MAX_DRIVES for some poor interface cards (seen with TEAC
- *       drives) which allow only one drive (ID 0); this avoids repetitive
- *       detection under IDs 1..3. 
- *       Elongated cmd_out_T response waiting; necessary for photo CDs with
- *       a lot of sessions.
- *       Bettered the sbpcd_open() behavior with TEAC drives.
- *
- *  3.8  Elongated max_latency for CR-56x drives.
- *
- *  3.9  Finally fixed the long-known SoundScape/SPEA/Sequoia S-1000 interface
- *       configuration bug.
- *       Now Corey, Heiko, Ken, Leo, Vadim/Eric & Werner are invited to copy
- *       the config_spea() routine into their drivers. ;-)
- *
- *
- *  TODO
- *
- *     disk change detection
- *     synchronize multi-activity
- *        (data + audio + ioctl + disk change, multiple drives)
- *     implement "read all subchannel data" (96 bytes per frame)
- *     check if CDROMPLAYMSF can cause a hang
- *
- *     special thanks to Kai Makisara (kai.makisara@vtt.fi) for his fine
- *     elaborated speed-up experiments (and the fabulous results!), for
- *     the "push" towards load-free wait loops, and for the extensive mail
- *     thread which brought additional hints and bug fixes.
- *
- *   Copyright (C) 1993, 1994, 1995  Eberhard Moenkeberg <emoenke@gwdg.de>
- *
- *                  If you change this software, you should mail a .diff
- *                  file with some description lines to emoenke@gwdg.de.
- *                  I want to know about it.
- *
- *                  If you are the editor of a Linux CD, you should
- *                  enable sbpcd.c within your boot floppy kernel and
- *                  send me one of your CDs for free.
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2, or (at your option)
- *   any later version.
- *
- *   You should have received a copy of the GNU General Public License
- *   (for example /usr/src/linux/COPYING); if not, write to the Free
- *   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef SBPCD_ISSUE
-#define SBPCD_ISSUE 1
-#endif SBPCD_ISSUE
-
-#include <linux/config.h>
-
-#ifdef MODULE
-#include <linux/module.h>
-#include <linux/version.h>
-#ifndef CONFIG_MODVERSIONS
-char kernel_version[]=UTS_RELEASE;
-#endif
-#else
-#define MOD_INC_USE_COUNT
-#define MOD_DEC_USE_COUNT
-#endif MODULE
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/major.h> 
-#include <linux/string.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/segment.h>
-#include <stdarg.h>
-#include <linux/sbpcd.h>
-
-#if !(SBPCD_ISSUE-1)
-#define MAJOR_NR MATSUSHITA_CDROM_MAJOR
-#endif
-#if !(SBPCD_ISSUE-2)
-#define MAJOR_NR MATSUSHITA_CDROM2_MAJOR /* second driver issue */
-#endif
-#if !(SBPCD_ISSUE-3)
-#define MAJOR_NR MATSUSHITA_CDROM3_MAJOR /* third driver issue */
-#endif
-#if !(SBPCD_ISSUE-4)
-#define MAJOR_NR MATSUSHITA_CDROM4_MAJOR /* fourth driver issue */
-#endif
-
-#include "blk.h"
-
-#define VERSION "v3.9 Eberhard Moenkeberg <emoenke@gwdg.de>"
-
-/*==========================================================================*/
-/*
- * provisions for more than 1 driver issues
- * currently up to 4 drivers, expandable
- */
-#if !(SBPCD_ISSUE-1)
-#define DO_SBPCD_REQUEST(a) do_sbpcd_request(a)
-#define SBPCD_INIT(a) sbpcd_init(a)
-#endif
-#if !(SBPCD_ISSUE-2)
-#define DO_SBPCD_REQUEST(a) do_sbpcd2_request(a)
-#define SBPCD_INIT(a) sbpcd2_init(a)
-#endif
-#if !(SBPCD_ISSUE-3)
-#define DO_SBPCD_REQUEST(a) do_sbpcd3_request(a)
-#define SBPCD_INIT(a) sbpcd3_init(a)
-#endif
-#if !(SBPCD_ISSUE-4)
-#define DO_SBPCD_REQUEST(a) do_sbpcd4_request(a)
-#define SBPCD_INIT(a) sbpcd4_init(a)
-#endif
-/*==========================================================================*/
-#if SBPCD_DIS_IRQ
-#define SBPCD_CLI cli()
-#define SBPCD_STI sti()
-#else
-#define SBPCD_CLI
-#define SBPCD_STI
-#endif SBPCD_DIS_IRQ
-/*==========================================================================*/
-/*
- * auto-probing address list
- * inspired by Adam J. Richter from Yggdrasil
- *
- * still not good enough - can cause a hang.
- *   example: a NE 2000 ethernet card at 300 will cause a hang probing 310.
- * if that happens, reboot and use the LILO (kernel) command line.
- * The possibly conflicting ethernet card addresses get NOT probed 
- * by default - to minimize the hang possibilities. 
- *
- * The SB Pro addresses get "mirrored" at 0x6xx and some more locations - to
- * avoid a type error, the 0x2xx-addresses must get checked before 0x6xx.
- *
- * send mail to emoenke@gwdg.de if your interface card is not FULLY
- * represented here.
- */
-#if !(SBPCD_ISSUE-1)
-static int sbpcd[] = 
-{
-	CDROM_PORT, SBPRO, /* probe with user's setup first */
-#if DISTRIBUTION
-	0x230, 1, /* Soundblaster Pro and 16 (default) */
-	0x300, 0, /* CI-101P (default), WDH-7001C (default),
-		     Galaxy (default), Reveal (one default) */
-	0x250, 1, /* OmniCD default, Soundblaster Pro and 16 */
-	0x260, 1, /* OmniCD */
-	0x320, 0, /* Lasermate, CI-101P, WDH-7001C, Galaxy, Reveal (other default),
-		     Longshine LCS-6853 (default) */
-	0x338, 0, /* Reveal Sound Wave 32 card model #SC600 */
-	0x340, 0, /* Mozart sound card (default), Lasermate, CI-101P */
-	0x360, 0, /* Lasermate, CI-101P */
-	0x270, 1, /* Soundblaster 16 */
-	0x670, 0, /* "sound card #9" */
-	0x690, 0, /* "sound card #9" */
-	0x338, 2, /* SPEA Media FX, Ensonic SoundScape (default) */
-	0x328, 2, /* SPEA Media FX */
-	0x348, 2, /* SPEA Media FX */
-	0x634, 0, /* some newer sound cards */
-	0x638, 0, /* some newer sound cards */
-	0x230, 1, /* some newer sound cards */
-	/* due to incomplete address decoding of the SbPro card, these must be last */
-	0x630, 0, /* "sound card #9" (default) */
-	0x650, 0, /* "sound card #9" */
-#ifdef MODULE
-	/*
-	 * some "hazardous" locations (no harm with the loadable version)
-	 * (will stop the bus if a NE2000 ethernet card resides at offset -0x10)
-	 */
-	0x330, 0, /* Lasermate, CI-101P, WDH-7001C */
-	0x350, 0, /* Lasermate, CI-101P */
-	0x358, 2, /* SPEA Media FX */
-	0x370, 0, /* Lasermate, CI-101P */
-	0x290, 1, /* Soundblaster 16 */
-	0x310, 0, /* Lasermate, CI-101P, WDH-7001C */
-#endif MODULE
-#endif DISTRIBUTION
-};
-#else
-static int sbpcd[] = {CDROM_PORT, SBPRO}; /* probe with user's setup only */
-#endif
-
-#define NUM_PROBE  (sizeof(sbpcd) / sizeof(int))
-
-/*==========================================================================*/
-/*
- * the external references:
- */
-#if !(SBPCD_ISSUE-1)
-#ifdef CONFIG_SBPCD2
-extern int sbpcd2_init(void);
-#endif
-#ifdef CONFIG_SBPCD3
-extern int sbpcd3_init(void);
-#endif
-#ifdef CONFIG_SBPCD4
-extern int sbpcd4_init(void);
-#endif
-#endif
-
-/*==========================================================================*/
-
-#define INLINE inline
-
-/*==========================================================================*/
-/*
- * the forward references:
- */
-static void sbp_sleep(u_int);
-static void mark_timeout_delay(u_long);
-static void mark_timeout_data(u_long);
-#if 0
-static void mark_timeout_audio(u_long);
-#endif
-static void sbp_read_cmd(void);
-static int sbp_data(void);
-static int cmd_out(void);
-static int DiskInfo(void);
-static int sbpcd_chk_disk_change(kdev_t);
-
-/*==========================================================================*/
-
-/*
- * pattern for printk selection:
- *
- * (1<<DBG_INF)  necessary information
- * (1<<DBG_BSZ)  BLOCK_SIZE trace
- * (1<<DBG_REA)  "read" status trace
- * (1<<DBG_CHK)  "media check" trace
- * (1<<DBG_TIM)  datarate timer test
- * (1<<DBG_INI)  initialization trace
- * (1<<DBG_TOC)  tell TocEntry values
- * (1<<DBG_IOC)  ioctl trace
- * (1<<DBG_STA)  "ResponseStatus" trace
- * (1<<DBG_ERR)  "cc_ReadError" trace
- * (1<<DBG_CMD)  "cmd_out" trace
- * (1<<DBG_WRN)  give explanation before auto-probing
- * (1<<DBG_MUL)  multi session code test
- * (1<<DBG_IDX)  "drive_id != 0" test code
- * (1<<DBG_IOX)  some special information
- * (1<<DBG_DID)  drive ID test
- * (1<<DBG_RES)  drive reset info
- * (1<<DBG_SPI)  SpinUp test info
- * (1<<DBG_IOS)  ioctl trace: "subchannel"
- * (1<<DBG_IO2)  ioctl trace: general
- * (1<<DBG_UPC)  show UPC info
- * (1<<DBG_XA1)  XA mode debugging
- * (1<<DBG_LCK)  door (un)lock info
- * (1<<DBG_SQ1)   dump SubQ frame
- * (1<<DBG_AUD)  "read audio" debugging
- * (1<<DBG_SEQ)  Sequoia interface configuration trace
- * (1<<DBG_LCS)  Longshine LCS-7260 debugging trace
- * (1<<DBG_CD2)  MKE CD200 debugging trace
- * (1<<DBG_TEA)  TEAC CD-55A debugging trace
- * (1<<DBG_TE2)  TEAC CD-55A debugging trace, 2nd level
- * (1<<DBG_000)  unnecessary information
- */
-#if DISTRIBUTION
-static int sbpcd_debug = (1<<DBG_INF);
-#else
-static int sbpcd_debug = ((1<<DBG_INF) |
-			  (1<<DBG_TOC) |
-			  (1<<DBG_MUL) |
-			  (1<<DBG_UPC));
-#endif DISTRIBUTION
-
-static int sbpcd_ioaddr = CDROM_PORT;	/* default I/O base address */
-static int sbpro_type = SBPRO;
-static unsigned char setup_done = 0;
-static int CDo_command, CDo_reset;
-static int CDo_sel_i_d, CDo_enable;
-static int CDi_info, CDi_status, CDi_data;
-static int MIXER_addr, MIXER_data;
-static struct cdrom_msf msf;
-static struct cdrom_ti ti;
-static struct cdrom_tochdr tochdr;
-static struct cdrom_tocentry tocentry;
-static struct cdrom_subchnl SC;
-static struct cdrom_volctrl volctrl;
-static struct cdrom_read_audio read_audio;
-static struct cdrom_multisession ms_info;
-
-static unsigned char msgnum=0;
-static char msgbuf[80];
-
-static const char *str_sb = "SoundBlaster";
-static const char *str_sb_l = "soundblaster";
-static const char *str_lm = "LaserMate";
-static const char *str_sp = "SPEA";
-static const char *str_sp_l = "spea";
-static const char *str_ss = "SoundScape";
-static const char *str_ss_l = "soundscape";
-const char *type;
-
-#if !(SBPCD_ISSUE-1)
-static const char *major_name="sbpcd";
-#endif
-#if !(SBPCD_ISSUE-2)
-static const char *major_name="sbpcd2";
-#endif
-#if !(SBPCD_ISSUE-3)
-static const char *major_name="sbpcd3";
-#endif
-#if !(SBPCD_ISSUE-4)
-static const char *major_name="sbpcd4";
-#endif
-
-/*==========================================================================*/
-
-#if FUTURE
-static struct wait_queue *sbp_waitq = NULL;
-#endif FUTURE
-
-/*==========================================================================*/
-#define SBP_BUFFER_FRAMES 8 /* driver's own read_ahead, data mode */
-/*==========================================================================*/
-
-static u_char family0[]="MATSHITA"; /* MKE CR-52x */
-static u_char family1[]="CR-56";    /* MKE CR-56x */
-static u_char family2[]="CD200";    /* MKE CD200 */
-static u_char familyL[]="LCS-7260"; /* Longshine LCS-7260 */
-static u_char familyT[]="CD-55";    /* TEAC CD-55A */
-
-static u_int recursion=0; /* internal testing only */
-static u_int fatal_err=0; /* internal testing only */
-static u_int response_count=0;
-static u_int flags_cmd_out;
-static u_char cmd_type=0;
-static u_char drvcmd[10];
-static u_char infobuf[20];
-static u_char xa_head_buf[CD_XA_HEAD];
-static u_char xa_tail_buf[CD_XA_TAIL];
-
-static volatile u_char busy_data=0;
-static volatile u_char busy_audio=0; /* true semaphores would be safer */
-static u_long timeout;
-static volatile u_char timed_out_delay=0;
-static volatile u_char timed_out_data=0;
-#if 0
-static volatile u_char timed_out_audio=0;
-#endif
-static u_int datarate= 1000000;
-static u_int maxtim16=16000000;
-static u_int maxtim04= 4000000;
-static u_int maxtim02= 2000000;
-static u_int maxtim_8=   30000;
-#if LONG_TIMING
-static u_int maxtim_data= 9000;
-#else
-static u_int maxtim_data= 3000;
-#endif LONG_TIMING
-#if DISTRIBUTION
-static int n_retries=3;
-#else
-static int n_retries=1;
-#endif
-/*==========================================================================*/
-
-static int ndrives=0;
-static u_char drv_pattern[NR_SBPCD]={speed_auto,speed_auto,speed_auto,speed_auto};
-static int sbpcd_blocksizes[NR_SBPCD] = {0, };
-
-/*==========================================================================*/
-/*
- * drive space begins here (needed separate for each unit) 
- */
-static int d=0; /* DriveStruct index: drive number */
-
-static struct {
-	char drv_id;           /* "jumpered" drive ID or -1 */
-	char drv_sel;          /* drive select lines bits */
-	
-	char drive_model[9];
-	u_char firmware_version[4];
-	char f_eject;          /* auto-eject flag: 0 or 1 */
-	u_char *sbp_buf;       /* Pointer to internal data buffer,
-				  space allocated during sbpcd_init() */
-	u_int sbp_bufsiz;      /* size of sbp_buf (# of frames) */
-	int sbp_first_frame;   /* First frame in buffer */
-	int sbp_last_frame;    /* Last frame in buffer  */
-	int sbp_read_frames;   /* Number of frames being read to buffer */
-	int sbp_current;       /* Frame being currently read */
-	
-	u_char mode;           /* read_mode: READ_M1, READ_M2, READ_SC, READ_AU */
-	u_char *aud_buf;       /* Pointer to audio data buffer,
-				  space allocated during sbpcd_init() */
-	u_int sbp_audsiz;      /* size of aud_buf (# of raw frames) */
-	u_char drv_type;
-	u_char drv_options;
-	int status_bits;
-	u_char diskstate_flags;
-	u_char sense_byte;
-	
-	u_char CD_changed;
-	char open_count;
-	u_char error_byte;
-	
-	u_char f_multisession;
-	u_int lba_multi;
-	int first_session;
-	int last_session;
-	int track_of_last_session;
-	
-	u_char audio_state;
-	u_int pos_audio_start;
-	u_int pos_audio_end;
-	char vol_chan0;
-	u_char vol_ctrl0;
-	char vol_chan1;
-	u_char vol_ctrl1;
-#if 000 /* no supported drive has it */
-	char vol_chan2;
-	u_char vol_ctrl2;
-	char vol_chan3;
-	u_char vol_ctrl3;
-#endif 000
-	u_char volume_control; /* TEAC on/off bits */
-	
-	u_char SubQ_ctl_adr;
-	u_char SubQ_trk;
-	u_char SubQ_pnt_idx;
-	u_int SubQ_run_tot;
-	u_int SubQ_run_trk;
-	u_char SubQ_whatisthis;
-	
-	u_char UPC_ctl_adr;
-	u_char UPC_buf[7];
-	
-	int frame_size;
-	int CDsize_frm;
-	
-	u_char xa_byte; /* 0x20: XA capabilities */
-	u_char n_first_track; /* binary */
-	u_char n_last_track; /* binary (not bcd), 0x01...0x63 */
-	u_int size_msf; /* time of whole CD, position of LeadOut track */
-	u_int size_blk;
-	
-	u_char TocEnt_nixbyte; /* em */
-	u_char TocEnt_ctl_adr;
-	u_char TocEnt_number;
-	u_char TocEnt_format; /* em */
-	u_int TocEnt_address;
-	u_char ored_ctl_adr; /* to detect if CDROM contains data tracks */
-	
-	struct {
-		u_char nixbyte; /* em */
-		u_char ctl_adr; /* 0x4x: data, 0x0x: audio */
-		u_char number;
-		u_char format; /* em */ /* 0x00: lba, 0x01: msf */
-		u_int address;
-	} TocBuffer[MAX_TRACKS+1]; /* last entry faked */ 
-	
-	int in_SpinUp; /* CR-52x test flag */
-	int n_bytes; /* TEAC awaited response count */
-	u_char error_state, b3, b4; /* TEAC command error state */
-	u_char f_drv_error; /* TEAC command error flag */
-	u_char speed_byte;
-	int frmsiz;
-	u_char f_XA; /* 1: XA */
-	u_char type_byte; /* 0, 1, 3 */
-	u_char mode_xb_6;
-	u_char mode_yb_7;
-	u_char mode_xb_8;
-	u_char delay;
-	
-} D_S[NR_SBPCD];
-
-/*
- * drive space ends here (needed separate for each unit)
- */
-/*==========================================================================*/
-#if 0
-unsigned long cli_sti; /* for saving the processor flags */
-#endif
-/*==========================================================================*/
-static struct timer_list delay_timer = { NULL, NULL, 0, 0, mark_timeout_delay};
-static struct timer_list data_timer = { NULL, NULL, 0, 0, mark_timeout_data};
-#if 0
-static struct timer_list audio_timer = { NULL, NULL, 0, 0, mark_timeout_audio};
-#endif
-/*==========================================================================*/
-/*
- * DDI interface
- */
-static void msg(int level, const char *fmt, ...)
-{
-	char buf[256];
-	va_list args;
-	
-	if (!(sbpcd_debug&(1<<level))) return;
-	
-	msgnum++;
-	if (msgnum>99) msgnum=0;
-	sprintf(buf, "%s-%d [%02d]:  ", major_name, d, msgnum);
-	va_start(args, fmt);
-	vsprintf(&buf[15], fmt, args);
-	va_end(args);
-	printk(buf);
-	sbp_sleep(55); /* else messages get lost */
-	return;
-}
-/*==========================================================================*/
-/*
- * DDI interface: runtime trace bit pattern maintenance
- */
-static int sbpcd_dbg_ioctl(unsigned long arg, int level)
-{
-	switch(arg)
-	{
-	case 0:	/* OFF */
-		sbpcd_debug = DBG_INF;
-		break;
-		
-	default:
-		if (arg>=128) sbpcd_debug &= ~(1<<(arg-128));
-		else sbpcd_debug |= (1<<arg);
-	}
-	return (arg);
-}
-/*==========================================================================*/
-static void mark_timeout_delay(u_long i)
-{
-	timed_out_delay=1;
-#if 0
-	msg(DBG_TIM,"delay timer expired.\n");
-#endif
-}
-/*==========================================================================*/
-static void mark_timeout_data(u_long i)
-{
-	timed_out_data=1;
-#if 0
-	msg(DBG_TIM,"data timer expired.\n");
-#endif
-}
-/*==========================================================================*/
-#if 0
-static void mark_timeout_audio(u_long i)
-{
-	timed_out_audio=1;
-#if 0
-	msg(DBG_TIM,"audio timer expired.\n");
-#endif
-}
-#endif
-/*==========================================================================*/
-/*
- * Wait a little while (used for polling the drive).
- */
-static void sbp_sleep(u_int time)
-{
-#ifndef MODULE
-	if (current == task[0]) 
-	{
-		del_timer(&delay_timer);
-		delay_timer.expires=jiffies+time;
-		timed_out_delay=0;
-		add_timer(&delay_timer);
-		while (!timed_out_delay) ;
-		return;
-	}
-#endif MODULE
-	sti();
-	current->state = TASK_INTERRUPTIBLE;
-	current->timeout = jiffies + time;
-	schedule();
-	sti();
-}
-/*==========================================================================*/
-/*
- *  convert logical_block_address to m-s-f_number (3 bytes only)
- */
-static INLINE void lba2msf(int lba, u_char *msf)
-{
-	lba += CD_MSF_OFFSET;
-	msf[0] = lba / (CD_SECS*CD_FRAMES);
-	lba %= CD_SECS*CD_FRAMES;
-	msf[1] = lba / CD_FRAMES;
-	msf[2] = lba % CD_FRAMES;
-}
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- *  convert msf-bin to msf-bcd
- */
-static INLINE void bin2bcdx(u_char *p)  /* must work only up to 75 or 99 */
-{
-	*p=((*p/10)<<4)|(*p%10);
-}
-/*==========================================================================*/
-static INLINE u_int blk2msf(u_int blk)
-{
-	MSF msf;
-	u_int mm;
-	
-	msf.c[3] = 0;
-	msf.c[2] = (blk + CD_MSF_OFFSET) / (CD_SECS * CD_FRAMES);
-	mm = (blk + CD_MSF_OFFSET) % (CD_SECS * CD_FRAMES);
-	msf.c[1] = mm / CD_FRAMES;
-	msf.c[0] = mm % CD_FRAMES;
-	return (msf.n);
-}
-/*==========================================================================*/
-static INLINE u_int make16(u_char rh, u_char rl)
-{
-	return ((rh<<8)|rl);
-}
-/*==========================================================================*/
-static INLINE u_int make32(u_int rh, u_int rl)
-{
-	return ((rh<<16)|rl);
-}
-/*==========================================================================*/
-static INLINE u_char swap_nibbles(u_char i)
-{
-	return ((i<<4)|(i>>4));
-}
-/*==========================================================================*/
-static INLINE u_char byt2bcd(u_char i)
-{
-	return (((i/10)<<4)+i%10);
-}
-/*==========================================================================*/
-static INLINE u_char bcd2bin(u_char bcd)
-{
-	return ((bcd>>4)*10+(bcd&0x0F));
-}
-/*==========================================================================*/
-static INLINE int msf2blk(int msfx)
-{
-	MSF msf;
-	int i;
-	
-	msf.n=msfx;
-	i=(msf.c[2] * CD_SECS + msf.c[1]) * CD_FRAMES + msf.c[0] - CD_MSF_OFFSET;
-	if (i<0) return (0);
-	return (i);
-}
-/*==========================================================================*/
-/*
- *  convert m-s-f_number (3 bytes only) to logical_block_address 
- */
-static INLINE int msf2lba(u_char *msf)
-{
-	int i;
-	
-	i=(msf[0] * CD_SECS + msf[1]) * CD_FRAMES + msf[2] - CD_MSF_OFFSET;
-	if (i<0) return (0);
-	return (i);
-}
-/*==========================================================================*/
-/* evaluate cc_ReadError code */ 
-static int sta2err(int sta)
-{
-	if (famT_drive)
-	{
-		if (sta==0x00) return (0);
-		if (sta==0x01) return (-604); /* CRC error */
-		if (sta==0x02) return (-602); /* drive not ready */
-		if (sta==0x03) return (-607); /* unknown media */
-		if (sta==0x04) return (-612); /* general failure */
-		if (sta==0x05) return (0);
-		if (sta==0x06) return (-615); /* invalid disk change */
-		if (sta==0x0b) return (-612); /* general failure */
-		if (sta==0xff) return (-612); /* general failure */
-		return (0);
-	}
-	else
-	{
-		if (sta<=2) return (sta);
-		if (sta==0x05) return (-604); /* CRC error */
-		if (sta==0x06) return (-606); /* seek error */
-		if (sta==0x0d) return (-606); /* seek error */
-		if (sta==0x0e) return (-603); /* unknown command */
-		if (sta==0x14) return (-603); /* unknown command */
-		if (sta==0x0c) return (-611); /* read fault */
-		if (sta==0x0f) return (-611); /* read fault */
-		if (sta==0x10) return (-611); /* read fault */
-		if (sta>=0x16) return (-612); /* general failure */
-		D_S[d].CD_changed=0xFF;
-		if (sta==0x11) return (-615); /* invalid disk change (LCS: removed) */
-		if (famL_drive)
-			if (sta==0x12) return (-615); /* invalid disk change (inserted) */
-		return (-602); /* drive not ready */
-	}
-}
-/*==========================================================================*/
-static INLINE void clr_cmdbuf(void)
-{
-	int i;
-	
-	for (i=0;i<10;i++) drvcmd[i]=0;
-	cmd_type=0;
-}
-/*==========================================================================*/
-static void flush_status(void)
-{
-	int i;
-	
-#ifdef MODULE
-	sbp_sleep(15*HZ/10);
-	for (i=maxtim_data;i!=0;i--) inb(CDi_status);
-#else
-	if (current == task[0])
-		for (i=maxtim02;i!=0;i--) inb(CDi_status);
-	else 
-	{
-		sbp_sleep(15*HZ/10);
-		for (i=maxtim_data;i!=0;i--) inb(CDi_status);
-	}
-#endif MODULE
-}
-/*==========================================================================*/
-static int CDi_stat_loop(void)
-{
-	int i,j;
-	
-#ifdef MODULE
-	for(timeout = jiffies + 10*HZ, i=maxtim_data; timeout > jiffies; )
-	{
-		for ( ;i!=0;i--)
-		{
-			j=inb(CDi_status);
-			if (!(j&s_not_data_ready)) return (j);
-			if (!(j&s_not_result_ready)) return (j);
-			if (fam0L_drive) if (j&s_attention) return (j);
-		}
-		sbp_sleep(1);
-		i = 1;
-	}
-#else
-	if (current == task[0])
-		for(i=maxtim16;i!=0;i--)
-		{
-			j=inb(CDi_status);
-			if (!(j&s_not_data_ready)) return (j);
-			if (!(j&s_not_result_ready)) return (j);
-			if (fam0L_drive) if (j&s_attention) return (j);
-		}
-	else
-		for(timeout = jiffies + 10*HZ, i=maxtim_data; timeout > jiffies; )
-		{
-			for ( ;i!=0;i--)
-			{
-				j=inb(CDi_status);
-				if (!(j&s_not_data_ready)) return (j);
-				if (!(j&s_not_result_ready)) return (j);
-				if (fam0L_drive) if (j&s_attention) return (j);
-			}
-			sbp_sleep(1);
-			i = 1;
-		}
-#endif MODULE
-	msg(DBG_LCS,"CDi_stat_loop failed\n");
-	return (-1);
-}
-/*==========================================================================*/
-#if 00000
-/*==========================================================================*/
-static int tst_DataReady(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_not_data_ready) return (0);
-	return (1);
-}
-/*==========================================================================*/
-static int tst_ResultReady(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_not_result_ready) return (0);
-	return (1);
-}
-/*==========================================================================*/
-static int tst_Attention(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_attention) return (1);
-	return (0);
-}
-/*==========================================================================*/
-#endif 00000
-/*==========================================================================*/
-static int ResponseInfo(void)
-{
-	int i,j,st=0;
-	u_long timeout;
-	
-#ifdef MODULE
-	if (0)
-#else
-	if (current == task[0])
-#endif MODULE
-		for (i=0;i<response_count;i++)
-		{
-			for (j=maxtim_8;j!=0;j--)
-			{
-				st=inb(CDi_status);
-				if (!(st&s_not_result_ready)) break;
-			}
-			if (j==0) 
-			{
-				msg(DBG_SEQ,"ResponseInfo: not_result_ready (got %d of %d bytes).\n", i, response_count);
-				break;
-			}
-			infobuf[i]=inb(CDi_info);
-		}
-	else 
-	{
-		for (i=0,timeout=jiffies+HZ;i<response_count;i++) 
-		{
-			for (j=maxtim_data; ; )
-			{
-				for ( ;j!=0;j-- )
-				{
-					st=inb(CDi_status);
-					if (!(st&s_not_result_ready)) break;
-				}
-				if ((j!=0)||(timeout<=jiffies)) break;
-				sbp_sleep(1);
-				j = 1;
-			}
-			if (timeout<=jiffies) break;
-			infobuf[i]=inb(CDi_info);
-		}
-	}
-#if 000
-	while (!(inb(CDi_status)&s_not_result_ready))
-	{
-		infobuf[i++]=inb(CDi_info);
-	}
-	j=i-response_count;
-	if (j>0) msg(DBG_INF,"ResponseInfo: got %d trailing bytes.\n",j);
-#endif 000
-	for (j=0;j<i;j++)
-		sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-	msgbuf[j*3]=0;
-	msg(DBG_CMD,"ResponseInfo:%s (%d,%d)\n",msgbuf,response_count,i);
-	j=response_count-i;
-	if (j>0) return (-j);
-	else return (i);
-}
-/*==========================================================================*/
-static void EvaluateStatus(int st)
-{
-	D_S[d].status_bits=0;
-	if (fam1_drive) D_S[d].status_bits=st|p_success;
-	else if (fam0_drive)
-	{
-		if (st&p_caddin_old) D_S[d].status_bits |= p_door_closed|p_caddy_in;
-		if (st&p_spinning) D_S[d].status_bits |= p_spinning;
-		if (st&p_check) D_S[d].status_bits |= p_check;
- 		if (st&p_success_old) D_S[d].status_bits |= p_success;
- 		if (st&p_busy_old) D_S[d].status_bits |= p_busy_new;
-		if (st&p_disk_ok) D_S[d].status_bits |= p_disk_ok;
-	}
-	else if (famL_drive)
-	{
- 		D_S[d].status_bits |= p_success;
-		if (st&p_caddin_old) D_S[d].status_bits |= p_disk_ok|p_caddy_in;
-		if (st&p_spinning) D_S[d].status_bits |= p_spinning;
-		if (st&p_check) D_S[d].status_bits |= p_check;
-		if (st&p_busy_old) D_S[d].status_bits |= p_busy_new;
-		if (st&p_lcs_door_closed) D_S[d].status_bits |= p_door_closed;
-		if (st&p_lcs_door_locked) D_S[d].status_bits |= p_door_locked;
-	}
-	else if (fam2_drive)
-	{
- 		D_S[d].status_bits |= p_success;
-		if (st&p2_check) D_S[d].status_bits |= p1_check;
-		if (st&p2_door_closed) D_S[d].status_bits |= p1_door_closed;
-		if (st&p2_disk_in) D_S[d].status_bits |= p1_disk_in;
-		if (st&p2_busy1) D_S[d].status_bits |= p1_busy;
-		if (st&p2_busy2) D_S[d].status_bits |= p1_busy;
-		if (st&p2_spinning) D_S[d].status_bits |= p1_spinning;
-		if (st&p2_door_locked) D_S[d].status_bits |= p1_door_locked;
-		if (st&p2_disk_ok) D_S[d].status_bits |= p1_disk_ok;
-	}
-	else if (famT_drive)
-	{
-		return; /* still needs to get coded */
- 		D_S[d].status_bits |= p_success;
-		if (st&p2_check) D_S[d].status_bits |= p1_check;
-		if (st&p2_door_closed) D_S[d].status_bits |= p1_door_closed;
-		if (st&p2_disk_in) D_S[d].status_bits |= p1_disk_in;
-		if (st&p2_busy1) D_S[d].status_bits |= p1_busy;
-		if (st&p2_busy2) D_S[d].status_bits |= p1_busy;
-		if (st&p2_spinning) D_S[d].status_bits |= p1_spinning;
-		if (st&p2_door_locked) D_S[d].status_bits |= p1_door_locked;
-		if (st&p2_disk_ok) D_S[d].status_bits |= p1_disk_ok;
-	}
-	return;
-}
-/*==========================================================================*/
-static int get_state_T(void)
-{
-	int i;
-	
-	static int cmd_out_T(void);
-
-	msg(DBG_TE2,"doing get_state_T...\n");
-	clr_cmdbuf();
-	D_S[d].n_bytes=1;
-	drvcmd[0]=CMDT_STATUS;
-	i=cmd_out_T();
-	if (i>=0) i=infobuf[0];
-	else
-	{
-		msg(DBG_TEA,"get_state_T error %d\n", i);
-		return (i);
-	}
-	if (i>=0)
-		/* 2: closed, disk in */
-		D_S[d].status_bits=p1_door_closed|p1_disk_in|p1_spinning|p1_disk_ok;
-	else if (D_S[d].error_state==6)
-		/* 3: closed, disk in, changed ("06 xx xx") */
-		D_S[d].status_bits=p1_door_closed|p1_disk_in;
-	else if ((D_S[d].error_state!=2)||(D_S[d].b3!=0x3A)||(D_S[d].b4==0x00))
-	{
-		/* 1: closed, no disk ("xx yy zz"or "02 3A 00") */
-		D_S[d].status_bits=p1_door_closed;
-		D_S[d].open_count=0;
-	}
-	else if (D_S[d].b4==0x01)
-	{
-		/* 0: open ("02 3A 01") */
-		D_S[d].status_bits=0;
-		D_S[d].open_count=0;
-	}
-	else
-	{
-		/* 1: closed, no disk ("02 3A xx") */
-		D_S[d].status_bits=p1_door_closed;
-		D_S[d].open_count=0;
-	}
-	msg(DBG_TE2,"get_state_T done (%02X)...\n", D_S[d].status_bits);
-	return (D_S[d].status_bits);
-}
-/*==========================================================================*/
-static int ResponseStatus(void)
-{
-	int i,j;
-	u_long timeout;
-	
-	msg(DBG_STA,"doing ResponseStatus...\n");
-	if (famT_drive) return (get_state_T());
-#ifdef MODULE
-	if (0)
-#else
-	if (current == task[0])
-#endif MODULE
-	{
-		if (flags_cmd_out & f_respo3) j = maxtim_8;
-		else if (flags_cmd_out&f_respo2) j=maxtim16;
-		else j=maxtim04;
-		for (;j!=0;j--)
-		{
-			i=inb(CDi_status);
-			if (!(i&s_not_result_ready)) break;
-		}
-	}
-	else
-	{
-		if (flags_cmd_out & f_respo3) timeout = jiffies;
-		else if (flags_cmd_out & f_respo2) timeout = jiffies + 16*HZ;
-		else timeout = jiffies + 4*HZ;
-		j=maxtim_8;
-		do
-		{
-			for ( ;j!=0;j--)
-			{ 
-				i=inb(CDi_status);
-				if (!(i&s_not_result_ready)) break;
-			}
-			if ((j!=0)||(timeout<jiffies)) break;
-			sbp_sleep(1);
-			j = 1;
-		}
-		while (1);
-	}
-	if (j==0) 
-	{
-		if ((flags_cmd_out & f_respo3) == 0)
-			msg(DBG_STA,"ResponseStatus: timeout.\n");
-		D_S[d].status_bits=0;
-		return (-401);
-	}
-	i=inb(CDi_info);
-	msg(DBG_STA,"ResponseStatus: response %02X.\n", i);
-	EvaluateStatus(i);
-#if 0
-	if (fam0_drive)
-#endif
-		msg(DBG_STA,"status_bits=%02X, i=%02X\n",D_S[d].status_bits,i);
-#if 1
-	return (D_S[d].status_bits);
-#else
-	return (i);
-#endif 0
-}
-/*==========================================================================*/
-static void cc_ReadStatus(void)
-{
-	int i;
-	
-	msg(DBG_STA,"giving cc_ReadStatus command\n");
-	if (famT_drive) return;
-	SBPCD_CLI;
-	if (fam0L_drive) OUT(CDo_command,CMD0_STATUS);
-	else if (fam1_drive) OUT(CDo_command,CMD1_STATUS);
-	else if (fam2_drive) OUT(CDo_command,CMD2_STATUS);
-	if (!fam0L_drive) for (i=0;i<6;i++) OUT(CDo_command,0);
-	SBPCD_STI;
-}
-/*==========================================================================*/
-static int cc_ReadError(void)
-{
-	int i;
-
-	clr_cmdbuf();
-	msg(DBG_ERR,"giving cc_ReadError command.\n");
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READ_ERR;
-		response_count=8;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_READ_ERR;
-		response_count=6;
-		if (famL_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_READ_ERR;
-		response_count=6;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		response_count=5;
-		drvcmd[0]=CMDT_READ_ERR;
-	}
-	i=cmd_out();
-	D_S[d].error_byte=0;
-	msg(DBG_ERR,"cc_ReadError: cmd_out(CMDx_READ_ERR) returns %d (%02X)\n",i,i);
-	if (i<0) return (i);
-	if (fam0_drive) i=1;
-	else i=2;
-	D_S[d].error_byte=infobuf[i];
-	msg(DBG_ERR,"cc_ReadError: infobuf[%d] is %d (%02X)\n",i,D_S[d].error_byte,D_S[d].error_byte);
-	i=sta2err(infobuf[i]);
-	return (i);
-}
-/*==========================================================================*/
-static int cmd_out_T(void)
-{
-#undef CMDT_TRIES
-#define CMDT_TRIES 1000
-	
-	static int cc_DriveReset(void);
-	int i, j, l, ntries;
-	
-	D_S[d].error_state=0;
-	D_S[d].b3=0;
-	D_S[d].b4=0;
-	D_S[d].f_drv_error=0;
-	for (i=0;i<10;i++) sprintf(&msgbuf[i*3]," %02X",drvcmd[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_CMD,"cmd_out_T:%s\n",msgbuf);
-
-	OUT(CDo_sel_i_d,0);
-	OUT(CDo_enable,D_S[d].drv_sel);
-	i=inb(CDi_status);
-	if (!(i&s_not_result_ready))
-	do
-	{
-		j=inb(CDi_info);
-		i=inb(CDi_status);
-		sbp_sleep(0);
-		msg(DBG_TEA,"cmd_out_T: spurious !s_not_result_ready. (%02X)\n", j);
-	}
-	while (!(i&s_not_result_ready));
-	cli();
-	for (i=0;i<10;i++) OUT(CDo_command,drvcmd[i]);
-	sti();
-	for (ntries=CMDT_TRIES;ntries>0;ntries--)
-	{
-		if (drvcmd[0]==CMDT_READ_VER) sbp_sleep(HZ);
-#if 1
-		OUT(CDo_sel_i_d,0);
-#endif
-		i=inb(CDi_status);
-		if (!(i&s_not_data_ready)) /* f.e. CMDT_DISKINFO */
-		{
-			OUT(CDo_sel_i_d,1);
-			if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
-			if (drvcmd[0]==CMDT_DISKINFO)
-			{
-				l=0;
-				do
-				{
-					infobuf[l++]=inb(CDi_data);
-					i=inb(CDi_status);
-				}
-				while (!(i&s_not_data_ready));
-				for (j=0;j<l;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-				msgbuf[j*3]=0;
-				msg(DBG_CMD,"cmd_out_T data response:%s\n", msgbuf);
-			}
-			else
-			{
-				msg(DBG_TEA,"cmd_out_T: data response with cmd_%02X !!!!!!!!!!!!!!!!!!!!\n", drvcmd[0]);
-				j=0;
-				do
-				{
-					i=inb(CDi_data);
-					j++;
-					i=inb(CDi_status);
-				}
-				while (!(i&s_not_data_ready));
-				msg(DBG_TEA,"cmd_out_T: data response: discarded %d bytes.\n", j);
-				fatal_err++;
-			}
-		}
-		i=inb(CDi_status);
-		if (!(i&s_not_result_ready))
-		{
-			OUT(CDo_sel_i_d,0);
-			l=0;
-			do
-			{
-				infobuf[l++]=inb(CDi_info);
-				i=inb(CDi_status);
-			}
-			while (!(i&s_not_result_ready));
-			for (j=0;j<l;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-			msgbuf[j*3]=0;
-			msg(DBG_CMD,"cmd_out_T info response:%s\n", msgbuf);
-			if (infobuf[0]!=0x02) return (l); /* info length */
-			do
-			{
-				++recursion;
-				if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (%02X): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n", drvcmd[0], recursion);
-				clr_cmdbuf();
-				drvcmd[0]=CMDT_READ_ERR;
-				j=cmd_out_T(); /* !!! recursive here !!! */
-				--recursion;
-				sbp_sleep(1);
-			}
-			while (j<0);
-			D_S[d].error_state=infobuf[2];
-			D_S[d].b3=infobuf[3];
-			D_S[d].b4=infobuf[4];
-			if (D_S[d].f_drv_error)
-			{
-				D_S[d].f_drv_error=0;
-				cc_DriveReset();
-				D_S[d].error_state=2;
-			}
-			return (-D_S[d].error_state-400);
-		}
-		if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
-		sbp_sleep(HZ/10);
-		if (ntries>(CMDT_TRIES-50)) continue;
-		msg(DBG_TEA,"cmd_out_T: next CMDT_TRIES (%02X): %d.\n", drvcmd[0], ntries-1);
-	}
-	D_S[d].f_drv_error=1;
-	cc_DriveReset();
-	D_S[d].error_state=2;
-	return (-99);
-}
-/*==========================================================================*/
-static int cmd_out(void)
-{
-	int i=0;
-	
-	if (famT_drive) return(cmd_out_T());
-	
-	if (flags_cmd_out&f_putcmd)
-	{ 
-		for (i=0;i<7;i++)
-			sprintf(&msgbuf[i*3], " %02X", drvcmd[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_CMD,"cmd_out:%s\n", msgbuf);
-		cli();
-		for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]);
-		sti();
-	}
-	if (response_count!=0)
-	{
-		if (cmd_type!=0)
-		{
-			if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-			msg(DBG_INF,"misleaded to try ResponseData.\n");
-			if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-			return (-22);
-		}
-		else i=ResponseInfo();
-		if (i<0) return (i);
-	}
-	if (D_S[d].in_SpinUp) msg(DBG_SPI,"in_SpinUp: to CDi_stat_loop.\n");
-	if (flags_cmd_out&f_lopsta)
-	{
-		i=CDi_stat_loop();
-		if ((i<0)||!(i&s_attention)) return (-8);
-	}
-	if (!(flags_cmd_out&f_getsta)) goto LOC_229;
-	
- LOC_228:
-	if (D_S[d].in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadStatus.\n");
-	cc_ReadStatus();
-	
- LOC_229:
-	if (flags_cmd_out&f_ResponseStatus) 
-	{
-		if (D_S[d].in_SpinUp) msg(DBG_SPI,"in_SpinUp: to ResponseStatus.\n");
-		i=ResponseStatus();
-		/* builds status_bits, returns orig. status or p_busy_new */
-		if (i<0) return (i);
-		if (flags_cmd_out&(f_bit1|f_wait_if_busy))
-		{
-			if (!st_check)
-			{
-				if ((flags_cmd_out&f_bit1)&&(i&p_success)) goto LOC_232;
-				if ((!(flags_cmd_out&f_wait_if_busy))||(!st_busy)) goto LOC_228;
-			}
-		}
-	}
- LOC_232:
-	if (!(flags_cmd_out&f_obey_p_check)) return (0);
-	if (!st_check) return (0);
-	if (D_S[d].in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadError.\n");
-	i=cc_ReadError();
-	if (D_S[d].in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cmd_out OK.\n");
-	msg(DBG_000,"cmd_out: cc_ReadError=%d\n", i);
-	return (i);
-}
-/*==========================================================================*/
-static int cc_Seek(u_int pos, char f_blk_msf)
-{
-	int i;
-	
-  clr_cmdbuf();
-	if (f_blk_msf>1) return (-3);
-	if (fam0_drive)
-	{
-		drvcmd[0]=CMD0_SEEK;
-		if (f_blk_msf==1) pos=msf2blk(pos);
-		drvcmd[2]=(pos>>16)&0x00FF;
-		drvcmd[3]=(pos>>8)&0x00FF;
-		drvcmd[4]=pos&0x00FF;
-		flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-			f_ResponseStatus | f_obey_p_check | f_bit1;
-	}
-	else if (fam1L_drive)
-	{
-		drvcmd[0]=CMD1_SEEK; /* same as CMD1_ and CMDL_ */
-		if (f_blk_msf==0) pos=blk2msf(pos);
-		drvcmd[1]=(pos>>16)&0x00FF;
-		drvcmd[2]=(pos>>8)&0x00FF;
-		drvcmd[3]=pos&0x00FF;
-		if (famL_drive)
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-			flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_SEEK;
-		if (f_blk_msf==0) pos=blk2msf(pos);
-		drvcmd[2]=(pos>>24)&0x00FF;
-		drvcmd[3]=(pos>>16)&0x00FF;
-		drvcmd[4]=(pos>>8)&0x00FF;
-		drvcmd[5]=pos&0x00FF;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_SEEK;
-		if (f_blk_msf==1) pos=msf2blk(pos);
-		drvcmd[2]=(pos>>24)&0x00FF;
-		drvcmd[3]=(pos>>16)&0x00FF;
-		drvcmd[4]=(pos>>8)&0x00FF;
-		drvcmd[5]=pos&0x00FF;
-		D_S[d].n_bytes=1;
-	}
-	response_count=0;
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SpinUp(void)
-{
-	int i;
-	
-	msg(DBG_SPI,"SpinUp.\n");
-	D_S[d].in_SpinUp = 1;
-	clr_cmdbuf();
-	if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_SPINUP;
-		flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
-			f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SPINUP;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[4]=0x01; /* "spinup" */
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x03; /* "insert", it hopefully spins the drive up */
-	}
-	response_count=0;
-	i=cmd_out();
-	D_S[d].in_SpinUp = 0;
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SpinDown(void)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SPINDOWN;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[4]=0x02; /* "eject" */
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famL_drive)
-	{
-		drvcmd[0]=CMDL_SPINDOWN;
-		drvcmd[1]=1;
-		flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x02; /* "eject" */
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_get_mode_T(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=10;
-	drvcmd[0]=CMDT_GETMODE;
-	drvcmd[4]=response_count;
-	i=cmd_out_T();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_set_mode_T(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=1;
-	drvcmd[0]=CMDT_SETMODE;
-	drvcmd[1]=D_S[d].speed_byte;
-	drvcmd[2]=D_S[d].frmsiz>>8;
-	drvcmd[3]=D_S[d].frmsiz&0x0FF;
-	drvcmd[4]=D_S[d].f_XA; /* 1: XA */
-	drvcmd[5]=D_S[d].type_byte; /* 0, 1, 3 */
-	drvcmd[6]=D_S[d].mode_xb_6;
-	drvcmd[7]=D_S[d].mode_yb_7|D_S[d].volume_control;
-	drvcmd[8]=D_S[d].mode_xb_8;
-	drvcmd[9]=D_S[d].delay;
-	i=cmd_out_T();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_prep_mode_T(void)
-{
-	int i, j;
-	
-	i=cc_get_mode_T();
-	if (i<0) return (i);
-	for (i=0;i<10;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
-	D_S[d].speed_byte=0x02; /* 0x02: auto quad, 0x82: quad, 0x81: double, 0x80: single */
-	D_S[d].frmsiz=make16(infobuf[2],infobuf[3]);
-	D_S[d].f_XA=infobuf[4];
-	if (D_S[d].f_XA==0) D_S[d].type_byte=0;
-	else D_S[d].type_byte=1;
-	D_S[d].mode_xb_6=infobuf[6];
-	D_S[d].mode_yb_7=1;
-	D_S[d].mode_xb_8=infobuf[8];
-	D_S[d].delay=0; /* 0, 1, 2, 3 */
-	j=cc_set_mode_T();
-	i=cc_get_mode_T();
-	for (i=0;i<10;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
-	return (j);
-}
-/*==========================================================================*/
-static int cc_SetSpeed(u_char speed, u_char x1, u_char x2)
-{
-	int i;
-	
-	if (fam0L_drive) return (-3);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x03;
-		drvcmd[2]=speed;
-		drvcmd[3]=x1;
-		drvcmd[4]=x2;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_SETSPEED;
-		if (speed&speed_auto)
-		{
-			drvcmd[2]=0xFF;
-			drvcmd[3]=0xFF;
-		}
-		else
-		{
-			drvcmd[2]=0;
-			drvcmd[3]=150;
-		}
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famT_drive)
-	{
-		return (0);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SetVolume(void)
-{
-	int i;
-	u_char channel0,channel1,volume0,volume1;
-	u_char control0,value0,control1,value1;
-	
-	D_S[d].diskstate_flags &= ~volume_bit;
-	clr_cmdbuf();
-	channel0=D_S[d].vol_chan0;
-	volume0=D_S[d].vol_ctrl0;
-	channel1=control1=D_S[d].vol_chan1;
-	volume1=value1=D_S[d].vol_ctrl1;
-	control0=value0=0;
-	
-	if (((D_S[d].drv_options&audio_mono)!=0)&&(D_S[d].drv_type>=drv_211))
-	{
-		if ((volume0!=0)&&(volume1==0))
-		{
-			volume1=volume0;
-			channel1=channel0;
-		}
-		else if ((volume0==0)&&(volume1!=0))
-		{
-			volume0=volume1;
-			channel0=channel1;
-		}
-	}
-	if (channel0>1)
-	{
-		channel0=0;
-		volume0=0;
-	}
-	if (channel1>1)
-	{
-		channel1=1;
-		volume1=0;
-	}
-	
-	if (fam1_drive)
-	{
-		control0=channel0+1;
-		control1=channel1+1;
-		value0=(volume0>volume1)?volume0:volume1;
-		value1=value0;
-		if (volume0==0) control0=0;
-		if (volume1==0) control1=0;
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x05;
-		drvcmd[3]=control0;
-		drvcmd[4]=value0;
-		drvcmd[5]=control1;
-		drvcmd[6]=value1;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		control0=channel0+1;
-		control1=channel1+1;
-		value0=(volume0>volume1)?volume0:volume1;
-		value1=value0;
-		if (volume0==0) control0=0;
-		if (volume1==0) control1=0;
-		drvcmd[0]=CMD2_SETMODE;
-		drvcmd[1]=0x0E;
-		drvcmd[3]=control0;
-		drvcmd[4]=value0;
-		drvcmd[5]=control1;
-		drvcmd[6]=value1;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famL_drive)
-	{
-		if ((volume0==0)||(channel0!=0)) control0 |= 0x80;
-		if ((volume1==0)||(channel1!=1)) control0 |= 0x40;
-		if (volume0|volume1) value0=0x80;
-		drvcmd[0]=CMDL_SETMODE;
-		drvcmd[1]=0x03;
-		drvcmd[4]=control0;
-		drvcmd[5]=value0;
-		flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (fam0_drive) /* different firmware levels */
-	{
-		if (D_S[d].drv_type>=drv_300)
-		{
-			control0=volume0&0xFC;
-			value0=volume1&0xFC;
-			if ((volume0!=0)&&(volume0<4)) control0 |= 0x04;
-			if ((volume1!=0)&&(volume1<4)) value0 |= 0x04;
-			if (channel0!=0) control0 |= 0x01;
-			if (channel1==1) value0 |= 0x01;
-		}
-		else
-		{
-			value0=(volume0>volume1)?volume0:volume1;
-			if (D_S[d].drv_type<drv_211)
-			{
-				if (channel0!=0)
-				{
-					i=channel1;
-					channel1=channel0;
-					channel0=i;
-					i=volume1;
-					volume1=volume0;
-					volume0=i;
-				}
-				if (channel0==channel1)
-				{
-					if (channel0==0)
-					{
-						channel1=1;
-						volume1=0;
-						volume0=value0;
-					}
-					else
-					{
-						channel0=0;
-						volume0=0;
-						volume1=value0;
-					}
-				}
-			}
-			
-			if ((volume0!=0)&&(volume1!=0))
-			{
-				if (volume0==0xFF) volume1=0xFF;
-				else if (volume1==0xFF) volume0=0xFF;
-			}
-			else if (D_S[d].drv_type<drv_201) volume0=volume1=value0;
-			
-			if (D_S[d].drv_type>=drv_201)
-			{
-				if (volume0==0) control0 |= 0x80;
-				if (volume1==0) control0 |= 0x40;
-			}
-			if (D_S[d].drv_type>=drv_211)
-			{
-				if (channel0!=0) control0 |= 0x20;
-				if (channel1!=1) control0 |= 0x10;
-			}
-		}
-		drvcmd[0]=CMD0_SETMODE;
-		drvcmd[1]=0x83;
-		drvcmd[4]=control0;
-		drvcmd[5]=value0;
-		flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		D_S[d].volume_control=0;
-		if (!volume0) D_S[d].volume_control|=0x10;
-		if (!volume1) D_S[d].volume_control|=0x20;
-		i=cc_prep_mode_T();
-		if (i<0) return (i);
-	}
-	if (!famT_drive)
-	{
-		response_count=0;
-		i=cmd_out();
-		if (i<0) return (i);
-	}
-	D_S[d].diskstate_flags |= volume_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int GetStatus(void)
-{
-	int i;
-	
-	if (famT_drive) return (0);
-	flags_cmd_out=f_getsta|f_ResponseStatus|f_obey_p_check;
-	response_count=0;
-	cmd_type=0;
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_DriveReset(void)
-{
-	int i;
-	
-	msg(DBG_RES,"cc_DriveReset called.\n");
-	clr_cmdbuf();
-	response_count=0;
-	if (fam0L_drive) OUT(CDo_reset,0x00);
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_RESET;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_RESET;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		OUT(CDo_reset,0x00);
-	}
-	else if (famT_drive)
-	{
-		OUT(CDo_sel_i_d,0);
-		OUT(CDo_enable,D_S[d].drv_sel);
-		OUT(CDo_command,CMDT_RESET);
-		for (i=1;i<10;i++) OUT(CDo_command,0);
-	}
-	if (fam0L_drive) sbp_sleep(5*HZ); /* wait 5 seconds */
-	else sbp_sleep(1*HZ); /* wait a second */
-#if 1
-	if (famT_drive)
-	{
-		msg(DBG_TEA, "================CMDT_RESET given=================.\n");
-		sbp_sleep(3*HZ);
-	}
-#endif 1
-	flush_status();
-	i=GetStatus();
-	if (i<0) return i;
-	if (!famT_drive)
-		if (D_S[d].error_byte!=aud_12) return -501;
-	return (0);
-}
-/*==========================================================================*/
-static int SetSpeed(void)
-{
-	int i, speed;
-	
-	if (!(D_S[d].drv_options&(speed_auto|speed_300|speed_150))) return (0);
-	speed=speed_auto;
-	if (!(D_S[d].drv_options&speed_auto))
-	{
-		speed |= speed_300;
-		if (!(D_S[d].drv_options&speed_300)) speed=0;
-	}
-	i=cc_SetSpeed(speed,0,0);
-	return (i);
-}
-/*==========================================================================*/
-static int DriveReset(void)
-{
-	int i;
-	
-	i=cc_DriveReset();
-	if (i<0) return (-22);
-	do
-	{
-		i=GetStatus();
-		if ((i<0)&&(i!=-615)) return (-2); /* i!=-615 is from sta2err */
-		if (!st_caddy_in) break;
-		sbp_sleep(1);
-	}
-	while (!st_diskok);
-#if 000
-	D_S[d].CD_changed=1;
-#endif
-	if ((st_door_closed) && (st_caddy_in))
-	{
-		i=DiskInfo();
-		if (i<0) return (-23);
-	}
-	return (0);
-}
-/*==========================================================================*/
-static int cc_PlayAudio(int pos_audio_start,int pos_audio_end)
-{
-	int i, j, n;
-	
-	if (D_S[d].audio_state==audio_playing) return (-EINVAL);
-	clr_cmdbuf();
-	response_count=0;
-	if (famL_drive)
-	{
-		drvcmd[0]=CMDL_PLAY;
-		i=msf2blk(pos_audio_start);
-		n=msf2blk(pos_audio_end)+1-i;
-		drvcmd[1]=(i>>16)&0x00FF;
-		drvcmd[2]=(i>>8)&0x00FF;
-		drvcmd[3]=i&0x00FF;
-		drvcmd[4]=(n>>16)&0x00FF;
-		drvcmd[5]=(n>>8)&0x00FF;
-		drvcmd[6]=n&0x00FF;
-		flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-			f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
-	}
-	else
-	{
-		j=1;
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus |
-				f_obey_p_check | f_wait_if_busy;
-		}
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_ResponseStatus;
-		}
-		else if (famT_drive)
-		{
-			drvcmd[0]=CMDT_PLAY_MSF;
-			j=3;
-			response_count=1;
-		}
-		else if (fam0_drive)
-		{
-			drvcmd[0]=CMD0_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-				f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
-		}
-		drvcmd[j]=(pos_audio_start>>16)&0x00FF;
-		drvcmd[j+1]=(pos_audio_start>>8)&0x00FF;
-		drvcmd[j+2]=pos_audio_start&0x00FF;
-		drvcmd[j+3]=(pos_audio_end>>16)&0x00FF;
-		drvcmd[j+4]=(pos_audio_end>>8)&0x00FF;
-		drvcmd[j+5]=pos_audio_end&0x00FF;
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_Pause_Resume(int pau_res)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_PAU_RES;
-		if (pau_res!=1) drvcmd[1]=0x80;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_PAU_RES;
-		if (pau_res!=1) drvcmd[2]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_PAU_RES;
-		if (pau_res!=1) drvcmd[1]=0x80;
-		if (famL_drive)
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
-				f_obey_p_check|f_bit1;
-		else
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
-				f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		if (pau_res==3)	return (cc_PlayAudio(D_S[d].pos_audio_start,D_S[d].pos_audio_end));
-		else if (pau_res==1) drvcmd[0]=CMDT_PAUSE;
-		else return (-56);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_LockDoor(char lock)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	msg(DBG_LCK,"cc_LockDoor: %d (drive %d)\n", lock, d);
-	msg(DBG_LCS,"p_door_locked bit %d before\n", st_door_locked);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_LOCK_CTL;
-		if (lock==1) drvcmd[1]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_LOCK_CTL;
-		if (lock==1) drvcmd[4]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famL_drive)
-	{
-		drvcmd[0]=CMDL_LOCK_CTL;
-		if (lock==1) drvcmd[1]=0x01;
-		flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_LOCK_CTL;
-		if (lock==1) drvcmd[4]=0x01;
-	}
-	i=cmd_out();
-	msg(DBG_LCS,"p_door_locked bit %d after\n", st_door_locked);
-	return (i);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-static int UnLockDoor(void)
-{
-	int i,j;
-	
-	j=20;
-	do
-	{
-		i=cc_LockDoor(0);
-		--j;
-		sbp_sleep(1);
-	}
-	while ((i<0)&&(j));
-	if (i<0)
-	{
-		cc_DriveReset();
-		return -84;
-	}
-	return (0);
-}
-/*==========================================================================*/
-static int LockDoor(void)
-{
-	int i,j;
-	
-	j=20;
-	do
-	{
-		i=cc_LockDoor(1);
-		--j;
-		sbp_sleep(1);
-	}
-	while ((i<0)&&(j));
-	if (j==0)
-	{		
-		cc_DriveReset();
-		j=20;
-		do
-		{
-			i=cc_LockDoor(1);
-			--j;
-			sbp_sleep(1);
-		}
-		while ((i<0)&&(j));
-	}
-	return (i);
-}
-/*==========================================================================*/
-static int cc_CloseTray(void)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	msg(DBG_LCK,"cc_CloseTray (drive %d)\n", d);
-	msg(DBG_LCS,"p_door_closed bit %d before\n", st_door_closed);
-	
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_TRAY_CTL;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[1]=0x01;
-		drvcmd[4]=0x03; /* "insert" */
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famL_drive)
-	{
-		drvcmd[0]=CMDL_TRAY_CTL;
-		flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
-			f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x03; /* "insert" */
-	}
-	i=cmd_out();
-	msg(DBG_LCS,"p_door_closed bit %d after\n", st_door_closed);
-	return (i);
-}
-/*==========================================================================*/
-static int cc_ReadSubQ(void)
-{
-	int i,j;
-
-	D_S[d].diskstate_flags &= ~subq_bit;
-	for (j=255;j>0;j--)
-	{
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_READSUBQ;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-			response_count=11;
-		}
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_READSUBQ;
-			drvcmd[1]=0x02;
-			drvcmd[3]=0x01;
-			flags_cmd_out=f_putcmd;
-			response_count=10;
-		}
-		else if (fam0L_drive)
-		{
-			drvcmd[0]=CMD0_READSUBQ;
-			drvcmd[1]=0x02;
-			if (famL_drive)
-				flags_cmd_out=f_putcmd;
-			else
-				flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-			response_count=13;
-		}
-		else if (famT_drive)
-		{
-			response_count=12;
-			drvcmd[0]=CMDT_READSUBQ;
-			drvcmd[1]=0x02;
-			drvcmd[2]=0x40;
-			drvcmd[3]=0x01;
-			drvcmd[8]=response_count;
-		}
-		i=cmd_out();
-		if (i<0) return (i);
-		for (i=0;i<response_count;i++)
-		{
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_SQ1,"cc_ReadSubQ:%s\n", msgbuf);
-		}
-		if (famT_drive) break;
-		if (infobuf[0]!=0) break;
-		if ((!st_spinning) || (j==1))
-		{
-			D_S[d].SubQ_ctl_adr=D_S[d].SubQ_trk=D_S[d].SubQ_pnt_idx=D_S[d].SubQ_whatisthis=0;
-			D_S[d].SubQ_run_tot=D_S[d].SubQ_run_trk=0;
-			return (0);
-		}
-	}
-	if (famT_drive) D_S[d].SubQ_ctl_adr=infobuf[1];
-	else D_S[d].SubQ_ctl_adr=swap_nibbles(infobuf[1]);
-	D_S[d].SubQ_trk=byt2bcd(infobuf[2]);
-	D_S[d].SubQ_pnt_idx=byt2bcd(infobuf[3]);
-	if (fam0L_drive) i=5;
-	else if (fam12_drive) i=4;
-	else if (famT_drive) i=8;
-	D_S[d].SubQ_run_tot=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
-	i=7;
-	if (fam0L_drive) i=9;
-	else if (fam12_drive) i=7;
-	else if (famT_drive) i=4;
-	D_S[d].SubQ_run_trk=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
-	D_S[d].SubQ_whatisthis=infobuf[i+3];
-	D_S[d].diskstate_flags |= subq_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ModeSense(void)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	D_S[d].diskstate_flags &= ~frame_size_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		response_count=5;
-		drvcmd[0]=CMD1_GETMODE;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		response_count=2;
-		drvcmd[0]=CMD0_GETMODE;
-		if (famL_drive) flags_cmd_out=f_putcmd;
-		else flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		response_count=10;
-		drvcmd[0]=CMDT_GETMODE;
-		drvcmd[4]=response_count;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	i=0;
-	D_S[d].sense_byte=0;
-	if (fam1_drive) D_S[d].sense_byte=infobuf[i++];
-	else if (famT_drive)
-	{
-		if (infobuf[4]==0x01) D_S[d].xa_byte=0x20;
-		else D_S[d].xa_byte=0;
-		i=2;
-	}
-	D_S[d].frame_size=make16(infobuf[i],infobuf[i+1]);
-	for (i=0;i<response_count;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_XA1,"cc_ModeSense:%s\n", msgbuf);
-	
-	D_S[d].diskstate_flags |= frame_size_bit;
-	return (0);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-static int cc_ModeSelect(int framesize)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	D_S[d].diskstate_flags &= ~frame_size_bit;
-	clr_cmdbuf();
-	D_S[d].frame_size=framesize;
-	if (framesize==CD_FRAMESIZE_RAW) D_S[d].sense_byte=0x82;
-	else D_S[d].sense_byte=0x00;
-	
-	msg(DBG_XA1,"cc_ModeSelect: %02X %04X\n",
-	    D_S[d].sense_byte, D_S[d].frame_size);
-	
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x00;
-		drvcmd[2]=D_S[d].sense_byte;
-		drvcmd[3]=(D_S[d].frame_size>>8)&0xFF;
-		drvcmd[4]=D_S[d].frame_size&0xFF;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_SETMODE;
-		drvcmd[1]=0x00;
-		drvcmd[2]=(D_S[d].frame_size>>8)&0xFF;
-		drvcmd[3]=D_S[d].frame_size&0xFF;
-		drvcmd[4]=0x00;
-		if(famL_drive)
-			flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		return (-1);
-	}
-	response_count=0;
-	i=cmd_out();
-	if (i<0) return (i);
-	D_S[d].diskstate_flags |= frame_size_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_GetVolume(void)
-{
-	int i;
-	u_char switches;
-	u_char chan0=0;
-	u_char vol0=0;
-	u_char chan1=1;
-	u_char vol1=0;
-	
-	D_S[d].diskstate_flags &= ~volume_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_GETMODE;
-		drvcmd[1]=0x05;
-		response_count=5;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_GETMODE;
-		drvcmd[1]=0x0E;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_GETMODE;
-		drvcmd[1]=0x03;
-		response_count=2;
-		if(famL_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		i=cc_get_mode_T();
-		if (i<0) return (i);
-	}
-	if (!famT_drive)
-	{
-		i=cmd_out();
-		if (i<0) return (i);
-	}
-	if (fam1_drive)
-	{
-		chan0=infobuf[1]&0x0F;
-		vol0=infobuf[2];
-		chan1=infobuf[3]&0x0F;
-		vol1=infobuf[4];
-		if (chan0==0)
-		{
-			chan0=1;
-			vol0=0;
-		}
-		if (chan1==0)
-		{
-			chan1=2;
-			vol1=0;
-		}
-		chan0 >>= 1;
-		chan1 >>= 1;
-	}
-	else if (fam2_drive)
-	{
-		chan0=infobuf[1];
-		vol0=infobuf[2];
-		chan1=infobuf[3];
-		vol1=infobuf[4];
-	}
-	else if (famL_drive)
-	{
-		chan0=0;
-		chan1=1;
-		vol0=vol1=infobuf[1];
-		switches=infobuf[0];
-		if ((switches&0x80)!=0) chan0=1;
-		if ((switches&0x40)!=0) chan1=0;
-	}
-	else if (fam0_drive) /* different firmware levels */
-	{
-		chan0=0;
-		chan1=1;
-		vol0=vol1=infobuf[1];
-		if (D_S[d].drv_type>=drv_201)
-		{
-			if (D_S[d].drv_type<drv_300)
-			{
-				switches=infobuf[0];
-				if ((switches&0x80)!=0) vol0=0;
-				if ((switches&0x40)!=0) vol1=0;
-				if (D_S[d].drv_type>=drv_211)
-				{
-					if ((switches&0x20)!=0) chan0=1;
-					if ((switches&0x10)!=0) chan1=0;
-				}
-			}
-			else
-			{
-				vol0=infobuf[0];
-				if ((vol0&0x01)!=0) chan0=1;
-				if ((vol1&0x01)==0) chan1=0;
-				vol0 &= 0xFC;
-				vol1 &= 0xFC;
-				if (vol0!=0) vol0 += 3;
-				if (vol1!=0) vol1 += 3;
-			}
-		}
-	}
-	else if (famT_drive)
-	{
-		D_S[d].volume_control=infobuf[7];
-		chan0=0;
-		chan1=1;
-		if (D_S[d].volume_control&0x10) vol0=0;
-		else vol0=0xff;
-		if (D_S[d].volume_control&0x20) vol1=0;
-		else vol1=0xff;
-	}
-	D_S[d].vol_chan0=chan0;
-	D_S[d].vol_ctrl0=vol0;
-	D_S[d].vol_chan1=chan1;
-	D_S[d].vol_ctrl1=vol1;
-#if 000
-	D_S[d].vol_chan2=2;
-	D_S[d].vol_ctrl2=0xFF;
-	D_S[d].vol_chan3=3;
-	D_S[d].vol_ctrl3=0xFF;
-#endif 000
-	D_S[d].diskstate_flags |= volume_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadCapacity(void)
-{
-	int i, j;
-	
-	if (famL_drive) return (0); /* some firmware lacks this command */
-	if (famT_drive) return (0); /* done with cc_ReadTocDescr() */
-	D_S[d].diskstate_flags &= ~cd_size_bit;
-	for (j=3;j>0;j--)
-	{
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_CAPACITY;
-			response_count=5;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		}
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_CAPACITY;
-			response_count=8;
-			flags_cmd_out=f_putcmd;
-		}
-		else if (fam0_drive)
-		{
-			drvcmd[0]=CMD0_CAPACITY;
-			response_count=5;
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-		}
-		i=cmd_out();
-		if (i>=0) break;
-		msg(DBG_000,"cc_ReadCapacity: cmd_out: err %d\n", i);
-		cc_ReadError();
-	}
-	if (j==0) return (i);
-	if (fam1_drive) D_S[d].CDsize_frm=msf2blk(make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])))+CD_MSF_OFFSET;
-	else if (fam0_drive) D_S[d].CDsize_frm=make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2]));
-	else if (fam2_drive) D_S[d].CDsize_frm=make32(make16(infobuf[0],infobuf[1]),make16(infobuf[2],infobuf[3]));
-	D_S[d].diskstate_flags |= cd_size_bit;
-	msg(DBG_000,"cc_ReadCapacity: %d frames.\n", D_S[d].CDsize_frm);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadTocDescr(void)
-{
-	int i;
-	
-	D_S[d].diskstate_flags &= ~toc_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_DISKINFO;
-		response_count=6;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_DISKINFO;
-		response_count=6;
-		if(famL_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		/* possibly longer timeout periods necessary */
-		D_S[d].f_multisession=0;
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=0xAB;
-		drvcmd[3]=0xFF; /* session */
-		response_count=8;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		D_S[d].f_multisession=0;
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=CDROM_LEADOUT;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x00;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	if ((fam1_drive)||(fam2_drive)||(famL_drive)||(fam0_drive))
-		D_S[d].xa_byte=infobuf[0];
-	if (fam2_drive)
-	{
-		D_S[d].first_session=infobuf[1];
-		D_S[d].last_session=infobuf[2];
-		D_S[d].n_first_track=infobuf[3];
-		D_S[d].n_last_track=infobuf[4];
-		if (D_S[d].first_session!=D_S[d].last_session)
-		{
-			D_S[d].f_multisession=1;
-			D_S[d].lba_multi=msf2blk(make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7])));
-		}
-#if 0
-		if (D_S[d].first_session!=D_S[d].last_session)
-		{
-			if (D_S[d].last_session<=20)
-				zwanzig=D_S[d].last_session+1;
-			else zwanzig=20;
-			for (count=D_S[d].first_session;count<zwanzig;count++)
-			{
-				drvcmd[0]=CMD2_DISKINFO;
-				drvcmd[1]=0x02;
-				drvcmd[2]=0xAB;
-				drvcmd[3]=count;
-				response_count=8;
-				flags_cmd_out=f_putcmd;
-				i=cmd_out();
-				if (i<0) return (i);
-				D_S[d].msf_multi_n[count]=make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7]));
-			}
-			D_S[d].diskstate_flags |= multisession_bit;
-		}
-#endif
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=0xAA;
-		drvcmd[3]=0xFF;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) return (i);
-		D_S[d].size_msf=make32(make16(0,infobuf[2]),make16(infobuf[3],infobuf[4]));
-		D_S[d].size_blk=msf2blk(D_S[d].size_msf);
-	}
-	else if (famT_drive)
-	{
-		D_S[d].size_msf=make32(make16(infobuf[8],infobuf[9]),make16(infobuf[10],infobuf[11]));
-		D_S[d].size_blk=msf2blk(D_S[d].size_msf);
-		D_S[d].CDsize_frm=D_S[d].size_blk+1;
-		D_S[d].n_first_track=infobuf[2];
-		D_S[d].n_last_track=infobuf[3];
-	}
-	else
-	{
-		D_S[d].n_first_track=infobuf[1];
-		D_S[d].n_last_track=infobuf[2];
-		D_S[d].size_msf=make32(make16(0,infobuf[3]),make16(infobuf[4],infobuf[5]));
-		D_S[d].size_blk=msf2blk(D_S[d].size_msf);
-		if (famL_drive) D_S[d].CDsize_frm=D_S[d].size_blk+1;
-	}
-	D_S[d].diskstate_flags |= toc_bit;
-	msg(DBG_TOC,"TocDesc: %02X %02X %02X %08X\n",
-	    D_S[d].xa_byte,
-	    D_S[d].n_first_track,
-	    D_S[d].n_last_track,
-	    D_S[d].size_msf);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadTocEntry(int num)
-{
-	int i;
-	
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READTOC;
-		drvcmd[2]=num;
-		response_count=8;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		/* possibly longer timeout periods necessary */
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=num;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_READTOC;
-		drvcmd[1]=0x02;
-		drvcmd[2]=num;
-		response_count=8;
-		if(famL_drive)
-			flags_cmd_out=f_putcmd;
-		else
-	flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=num;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x00;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	if ((fam1_drive)||(famL_drive)||(fam0_drive))
-	{
-		D_S[d].TocEnt_nixbyte=infobuf[0];
-		i=1;
-	}
-	else if (fam2_drive) i=0;
-	else if (famT_drive)
-	{
-		i=5;
-	}
-	D_S[d].TocEnt_ctl_adr=swap_nibbles(infobuf[i++]);
-	if ((fam1_drive)||(famL_drive)||(fam0_drive))
-	{
-		D_S[d].TocEnt_number=infobuf[i++];
-		D_S[d].TocEnt_format=infobuf[i];
-	}
-	else D_S[d].TocEnt_number=num;
-	if (fam1_drive) i=4;
-	else if (fam0L_drive) i=5;
-	else if (fam2_drive) i=2;
-	else if (famT_drive) i=9;
-	D_S[d].TocEnt_address=make32(make16(0,infobuf[i]),
-				     make16(infobuf[i+1],infobuf[i+2]));
-	msg(DBG_TOC,"TocEntry: %02X %02X %02X %02X %08X\n",
-	    D_S[d].TocEnt_nixbyte, D_S[d].TocEnt_ctl_adr,
-	    D_S[d].TocEnt_number, D_S[d].TocEnt_format,
-	    D_S[d].TocEnt_address);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadPacket(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	drvcmd[0]=CMD0_PACKET;
-	drvcmd[1]=response_count;
-	if(famL_drive) flags_cmd_out=f_putcmd;
-	else if (fam01_drive)
-		flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	else if (fam2_drive) return (-1); /* not implemented yet */
-	else if (famT_drive)
-	{
-		return (-1);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int convert_UPC(u_char *p)
-{
-	int i;
-	
-	p++;
-	if (fam0L_drive) p[13]=0;
-	for (i=0;i<7;i++)
-	{
-		if (fam1_drive) D_S[d].UPC_buf[i]=swap_nibbles(*p++);
-		else if (fam0L_drive)
-		{
-			D_S[d].UPC_buf[i]=((*p++)<<4)&0xFF;
-			D_S[d].UPC_buf[i] |= *p++;
-		}
-		else if (famT_drive)
-		{
-			return (-1);
-		}
-		else /* CD200 */
-		{
-			return (-1);
-		}
-	}
-	D_S[d].UPC_buf[6] &= 0xF0;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadUPC(void)
-{
-	int i;
-#if TEST_UPC
-	int block, checksum;
-#endif TEST_UPC
-	
-	if (fam2_drive) return (0); /* not implemented yet */
-	if (famT_drive)	return (0); /* not implemented yet */
-#if 1
-	if (fam0_drive) return (0); /* but it should work */
-#endif 1
-	
-	D_S[d].diskstate_flags &= ~upc_bit;
-#if TEST_UPC
-	for (block=CD_MSF_OFFSET+1;block<CD_MSF_OFFSET+200;block++)
-	{
-#endif TEST_UPC
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_READ_UPC;
-#if TEST_UPC
-			drvcmd[1]=(block>>16)&0xFF;
-			drvcmd[2]=(block>>8)&0xFF;
-			drvcmd[3]=block&0xFF;
-#endif TEST_UPC
-			response_count=8;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		}
-		else if (fam0L_drive)
-		{
-			drvcmd[0]=CMD0_READ_UPC;
-#if TEST_UPC
-			drvcmd[2]=(block>>16)&0xFF;
-			drvcmd[3]=(block>>8)&0xFF;
-			drvcmd[4]=block&0xFF;
-#endif TEST_UPC
-			response_count=0;
-			flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-		}
-		else if (fam2_drive)
-		{
-			return (-1);
-		}
-		else if (famT_drive)
-		{
-			return (-1);
-		}
-		i=cmd_out();
-		if (i<0)
-		{
-			msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
-			return (i);
-		}
-		if (fam0L_drive)
-		{
-			response_count=16;
-			if (famL_drive) flags_cmd_out=f_putcmd;
-			i=cc_ReadPacket();
-			if (i<0)
-			{
-				msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
-				return (i);
-			}
-		}
-#if TEST_UPC
-		checksum=0;
-#endif TEST_UPC
-		for (i=0;i<(fam1_drive?8:16);i++)
-		{
-#if TEST_UPC
-			checksum |= infobuf[i];
-#endif TEST_UPC
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-		}
-		msgbuf[i*3]=0;
-		msg(DBG_UPC,"UPC info:%s\n", msgbuf);
-#if TEST_UPC
-		if ((checksum&0x7F)!=0) break;
-	}
-#endif TEST_UPC
-	D_S[d].UPC_ctl_adr=0;
-	if (fam1_drive) i=0;
-	else i=2;
-	if ((infobuf[i]&0x80)!=0)
-	{
-		convert_UPC(&infobuf[i]);
-		D_S[d].UPC_ctl_adr = (D_S[d].TocEnt_ctl_adr & 0xF0) | 0x02;
-	}
-	for (i=0;i<7;i++)
-		sprintf(&msgbuf[i*3], " %02X", D_S[d].UPC_buf[i]);
-	sprintf(&msgbuf[i*3], " (%02X)", D_S[d].UPC_ctl_adr);
-	msgbuf[i*3+5]=0;
-	msg(DBG_UPC,"UPC code:%s\n", msgbuf);
-	D_S[d].diskstate_flags |= upc_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_CheckMultiSession(void)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	D_S[d].f_multisession=0;
-	D_S[d].lba_multi=0;
-	if (fam0_drive) return (0);
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_MULTISESS;
-		response_count=6;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		i=cmd_out();
-		if (i<0) return (i);
-		if ((infobuf[0]&0x80)!=0)
-		{
-			D_S[d].f_multisession=1;
-			D_S[d].lba_multi=msf2blk(make32(make16(0,infobuf[1]),
-							make16(infobuf[2],infobuf[3])));
-		}
-	}
-	else if (famL_drive)
-	{
-		drvcmd[0]=CMDL_MULTISESS;
-		drvcmd[1]=3;
-		drvcmd[2]=1;
-		response_count=8;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) return (i);
-		D_S[d].lba_multi=msf2blk(make32(make16(0,infobuf[5]),
-						make16(infobuf[6],infobuf[7])));
-	}
-	else if (famT_drive)
-	{
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=0;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x40;
-		i=cmd_out();
-		if (i<0) return (i);
-		D_S[d].first_session=infobuf[2];
-		D_S[d].last_session=infobuf[3];
-		D_S[d].track_of_last_session=infobuf[6];
-		if (D_S[d].first_session!=D_S[d].last_session)
-		{
-			D_S[d].f_multisession=1;
-			D_S[d].lba_multi=msf2blk(make32(make16(0,infobuf[9]),make16(infobuf[10],infobuf[11])));
-		}
-	}
-	for (i=0;i<response_count;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_MUL,"MultiSession Info:%s (%d)\n", msgbuf, D_S[d].lba_multi);
-	if (D_S[d].lba_multi>200)
-	{
-		D_S[d].f_multisession=1;
-		msg(DBG_MUL,"MultiSession base: %06X\n", D_S[d].lba_multi);
-	}
-	return (0);
-}
-/*==========================================================================*/
-#if FUTURE
-static int cc_SubChanInfo(int frame, int count, u_char *buffer)
-	/* "frame" is a RED BOOK (msf-bin) address */
-{
-	int i;
-	
-	if (fam0L_drive) return (-ENOSYS); /* drive firmware lacks it */
-	if (famT_drive)
-	{
-		return (-1);
-	}
-#if 0
-	if (D_S[d].audio_state!=audio_playing) return (-ENODATA);
-#endif
-	clr_cmdbuf();
-	drvcmd[0]=CMD1_SUBCHANINF;
-	drvcmd[1]=(frame>>16)&0xFF;
-	drvcmd[2]=(frame>>8)&0xFF;
-	drvcmd[3]=frame&0xFF;
-	drvcmd[5]=(count>>8)&0xFF;
-	drvcmd[6]=count&0xFF;
-	flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	cmd_type=READ_SC;
-	D_S[d].frame_size=CD_FRAMESIZE_SUB;
-	i=cmd_out(); /* which buffer to use? */
-	return (i);
-}
-#endif FUTURE
-/*==========================================================================*/
-static void check_datarate(void)
-{
-	int i=0;
-	
-	msg(DBG_IOX,"check_datarate entered.\n");
-	datarate=0;
-#if TEST_STI
-	for (i=0;i<=1000;i++) printk(".");
-#endif
-	/* set a timer to make (timed_out_delay!=0) after 1.1 seconds */
-#if 1
-	del_timer(&delay_timer);
-#endif
-	delay_timer.expires=jiffies+11*HZ/10;
-	timed_out_delay=0;
-	add_timer(&delay_timer);
-#if 0
-	msg(DBG_TIM,"delay timer started (11*HZ/10).\n");
-#endif
-	do
-	{
-		i=inb(CDi_status);
-		datarate++;
-#if 1
-		if (datarate>0x6FFFFFFF) break;
-#endif 00000
-	}
-	while (!timed_out_delay);
-	del_timer(&delay_timer);
-#if 0
-	msg(DBG_TIM,"datarate: %04X\n", datarate);
-#endif
-	if (datarate<65536) datarate=65536;
-	maxtim16=datarate*16;
-	maxtim04=datarate*4;
-	maxtim02=datarate*2;
-	maxtim_8=datarate/32;
-#if LONG_TIMING
-	maxtim_data=datarate/100;
-#else
-	maxtim_data=datarate/300;
-#endif LONG_TIMING
-#if 0
-	msg(DBG_TIM,"maxtim_8 %d, maxtim_data %d.\n", maxtim_8, maxtim_data);
-#endif
-}
-/*==========================================================================*/
-#if 0
-static int c2_ReadError(int fam)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=9;
-	clr_respo_buf(9);
-	if (fam==1)
-	{
-		drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
-		i=do_cmd(f_putcmd|f_lopsta|f_getsta|f_ResponseStatus);
-	}
-	else if (fam==2)
-	{
-		drvcmd[0]=CMD2_READ_ERR;
-		i=do_cmd(f_putcmd);
-	}
-	else return (-1);
-	return (i);
-}
-#endif
-/*==========================================================================*/
-static void ask_mail(void)
-{
-	int i;
-	
-	msg(DBG_INF, "please mail the following lines to emoenke@gwdg.de:\n");
-	msg(DBG_INF, "%s\n", VERSION);
-	msg(DBG_INF, "address %03X, type %s, drive %s (ID %d)\n",
-	    CDo_command, type, D_S[d].drive_model, D_S[d].drv_id);
-	for (i=0;i<12;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_INF,"infobuf =%s\n", msgbuf);
-	for (i=0;i<12;i++)
-		sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_INF,"infobuf =%s\n", msgbuf);
-}
-/*==========================================================================*/
-static int check_version(void)
-{
-	int i, j, l;
-	int teac_possible=0;
-	
-	msg(DBG_INI,"check_version entered.\n");
-	msg(DBG_TE2,"check_version: id=%d, d=%d.\n", D_S[d].drv_id, d);
-	D_S[d].drv_type=0;
-
-	/* check for CR-52x, CR-56x and LCS-7260 */
-	/* clear any pending error state */
-	clr_cmdbuf();
-	drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
-	response_count=9;
-	flags_cmd_out=f_putcmd;
-	i=cmd_out();
-	if (i<0) msg(DBG_INI,"CMD0_READERR returns %d (ok anyway).\n",i);
-	/* read drive version */
-	clr_cmdbuf();
-	for (i=0;i<12;i++) infobuf[i]=0;
-	drvcmd[0]=CMD0_READ_VER; /* same as CMD1_ and CMDL_ */
-	response_count=12; /* fam1: only 11 */
-	flags_cmd_out=f_putcmd;
-	i=cmd_out();
-	if (i<-1) msg(DBG_INI,"CMD0_READ_VER returns %d\n",i);
-	if (i==-11) teac_possible++;
-	j=0;
-	for (i=0;i<12;i++) j+=infobuf[i];
-	if (j)
-	{
-		for (i=0;i<12;i++)
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_IDX,"infobuf =%s\n", msgbuf);
-		msg(DBG_000,"infobuf =%s\n", msgbuf);
-		for (i=0;i<12;i++)
-			sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_IDX,"infobuf =%s\n", msgbuf);
-		msg(DBG_000,"infobuf =%s\n", msgbuf);
-	}
-	for (i=0;i<4;i++) if (infobuf[i]!=family1[i]) break;
-	if (i==4)
-	{
-		D_S[d].drive_model[0]='C';
-		D_S[d].drive_model[1]='R';
-		D_S[d].drive_model[2]='-';
-		D_S[d].drive_model[3]='5';
-		D_S[d].drive_model[4]=infobuf[i++];
-		D_S[d].drive_model[5]=infobuf[i++];
-		D_S[d].drive_model[6]=0;
-		D_S[d].drv_type=drv_fam1;
-	}
-	if (!D_S[d].drv_type)
-	{
-		for (i=0;i<8;i++) if (infobuf[i]!=family0[i]) break;
-		if (i==8)
-		{
-			D_S[d].drive_model[0]='C';
-			D_S[d].drive_model[1]='R';
-			D_S[d].drive_model[2]='-';
-			D_S[d].drive_model[3]='5';
-			D_S[d].drive_model[4]='2';
-			D_S[d].drive_model[5]='x';
-			D_S[d].drive_model[6]=0;
-			D_S[d].drv_type=drv_fam0;
-		}
-	}
-	if (!D_S[d].drv_type)
-	{
-		for (i=0;i<8;i++) if (infobuf[i]!=familyL[i]) break;
-		if (i==8)
-		{
-			for (j=0;j<8;j++)
-				D_S[d].drive_model[j]=infobuf[j];
-			D_S[d].drive_model[8]=0;
-			D_S[d].drv_type=drv_famL;
-		}
-	}
-	if (!D_S[d].drv_type)
-	{
-		/* check for CD200 */
-		clr_cmdbuf();
-		drvcmd[0]=CMD2_READ_ERR;
-		response_count=9;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) msg(DBG_INI,"CMD2_READERR returns %d (ok anyway).\n",i);
-		if (i<0) msg(DBG_000,"CMD2_READERR returns %d (ok anyway).\n",i);
-		/* read drive version */
-		clr_cmdbuf();
-		for (i=0;i<12;i++) infobuf[i]=0;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-#if 0
-		OUT(CDo_reset,0);
-		sbp_sleep(6*HZ);
-		OUT(CDo_enable,D_S[d].drv_sel);
-#endif 0
-		drvcmd[0]=CMD2_READ_VER;
-		response_count=12;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) msg(DBG_INI,"CMD2_READ_VER returns %d\n",i);
-		if (i==-7) teac_possible++;
-		j=0;
-		for (i=0;i<12;i++) j+=infobuf[i];
-		if (j)
-		{
-			for (i=0;i<12;i++)
-				sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_IDX,"infobuf =%s\n", msgbuf);
-			for (i=0;i<12;i++)
-				sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_IDX,"infobuf =%s\n", msgbuf);
-		}
-		if (i>=0)
-		{
-			for (i=0;i<5;i++) if (infobuf[i]!=family2[i]) break;
-			if (i==5)
-			{
-				D_S[d].drive_model[0]='C';
-				D_S[d].drive_model[1]='D';
-				D_S[d].drive_model[2]='2';
-				D_S[d].drive_model[3]='0';
-				D_S[d].drive_model[4]='0';
-				D_S[d].drive_model[5]=infobuf[i++];
-				D_S[d].drive_model[6]=infobuf[i++];
-				D_S[d].drive_model[7]=0;
-				D_S[d].drv_type=drv_fam2;
-			}
-		}
-	}
-	if (!D_S[d].drv_type)
-	{
-		/* check for TEAC CD-55A */
-		msg(DBG_TEA,"teac_possible: %d\n",teac_possible);
-		for (j=1;j<=((D_S[d].drv_id==0)?3:1);j++)
-		{
-			for (l=1;l<=((D_S[d].drv_id==0)?10:1);l++)
-			{
-				msg(DBG_TEA,"TEAC reset #%d-%d.\n", j, l);
-				if (sbpro_type==1) OUT(CDo_reset,0);
-				else
-				{
-					OUT(CDo_enable,D_S[d].drv_sel);
-					OUT(CDo_sel_i_d,0);
-					OUT(CDo_command,CMDT_RESET);
-					for (i=0;i<9;i++) OUT(CDo_command,0);
-				}
-				sbp_sleep(5*HZ/10);
-				OUT(CDo_enable,D_S[d].drv_sel);
-				OUT(CDo_sel_i_d,0);
-				i=inb(CDi_status);
-				msg(DBG_TEA,"TEAC CDi_status: %02X.\n",i);
-#if 0
-				if (i&s_not_result_ready) continue; /* drive not present or ready */
-#endif
-				i=inb(CDi_info);
-				msg(DBG_TEA,"TEAC CDi_info: %02X.\n",i);
-				if (i==0x55) break; /* drive found */
-			}
-			if (i==0x55) break; /* drive found */
-		}
-		if (i==0x55) /* drive found */
-		{
-			msg(DBG_TEA,"TEAC drive found.\n");
-			clr_cmdbuf();
-			flags_cmd_out=f_putcmd;
-			response_count=12;
-			drvcmd[0]=CMDT_READ_VER;
-			drvcmd[4]=response_count;
-			for (i=0;i<12;i++) infobuf[i]=0;
-			i=cmd_out_T();
-			if (i!=0) msg(DBG_TEA,"cmd_out_T(CMDT_READ_VER) returns %d.\n",i);
-			for (i=1;i<6;i++) if (infobuf[i]!=familyT[i-1]) break;
-			if (i==6)
-			{
-				D_S[d].drive_model[0]='C';
-				D_S[d].drive_model[1]='D';
-				D_S[d].drive_model[2]='-';
-				D_S[d].drive_model[3]='5';
-				D_S[d].drive_model[4]='5';
-				D_S[d].drive_model[5]=0;
-				D_S[d].drv_type=drv_famT;
-			}
-		}
-	}
-	if (!D_S[d].drv_type)
-	{
-		msg(DBG_TEA,"no drive found at address %03X under ID %d.\n",CDo_command,D_S[d].drv_id);
-		return (-522);
-	}
-	for (j=0;j<4;j++) D_S[d].firmware_version[j]=infobuf[i+j];
-	if (famL_drive)
-	{
-		u_char lcs_firm_e1[]="A E1";
-		u_char lcs_firm_f4[]="A4F4";
-		
-		for (j=0;j<4;j++)
-			if (D_S[d].firmware_version[j]!=lcs_firm_e1[j]) break;
-		if (j==4) D_S[d].drv_type=drv_e1;
-
-		for (j=0;j<4;j++)
-			if (D_S[d].firmware_version[j]!=lcs_firm_f4[j]) break;
-		if (j==4) D_S[d].drv_type=drv_f4;
-
-		if (D_S[d].drv_type==drv_famL) ask_mail();
-	}
-	else if (famT_drive)
-	{
-		j=infobuf[4]; /* one-byte version??? - here: 0x15 */
-		if (j=='5')
-		{
-			D_S[d].firmware_version[0]=infobuf[7];
-			D_S[d].firmware_version[1]=infobuf[8];
-			D_S[d].firmware_version[2]=infobuf[10];
-			D_S[d].firmware_version[3]=infobuf[11];
-		}
-		else
-		{
-			if (j!=0x15) ask_mail();
-			D_S[d].firmware_version[0]='0';
-			D_S[d].firmware_version[1]='.';
-			D_S[d].firmware_version[2]='0'+(j>>4);
-			D_S[d].firmware_version[3]='0'+(j&0x0f);
-		}
-	}
-	else /* CR-52x, CR-56x, CD200 */
-	{
-		j = (D_S[d].firmware_version[0] & 0x0F) * 100 +
-			(D_S[d].firmware_version[2] & 0x0F) *10 +
-				(D_S[d].firmware_version[3] & 0x0F);
-		if (fam0_drive)
-		{
-			if (j<200) D_S[d].drv_type=drv_199;
-			else if (j<201) D_S[d].drv_type=drv_200;
-			else if (j<210) D_S[d].drv_type=drv_201;
-			else if (j<211) D_S[d].drv_type=drv_210;
-			else if (j<300) D_S[d].drv_type=drv_211;
-			else if (j>=300) D_S[d].drv_type=drv_300;
-		}
-		else if (fam1_drive)
-		{
-			if (j<100) D_S[d].drv_type=drv_099;
-			else
-			{
-				D_S[d].drv_type=drv_100;
-				if ((j!=500)&&(j!=102)) ask_mail();
-			}
-		}
-		else if (fam2_drive)
-		{
-			msg(DBG_INF,"new drive CD200 (%s)detected.\n", D_S[d].firmware_version);
-			msg(DBG_INF,"CD200 is not fully supported yet - CD200F should work.\n");
-			if ((j!=1)&&(j!=101)&&(j!=35)) ask_mail(); /* unknown version at time */
-		}
-	}
-	msg(DBG_LCS,"drive type %02X\n",D_S[d].drv_type);
-	msg(DBG_INI,"check_version done.\n");
-	return (0);
-}
-/*==========================================================================*/
-static void switch_drive(int i)
-{
-	d=i;
-	OUT(CDo_enable,D_S[d].drv_sel);
-	msg(DBG_DID,"drive %d (ID=%d) activated.\n", i, D_S[d].drv_id);
-	return;
-}
-/*==========================================================================*/
-#ifdef PATH_CHECK
-/*
- * probe for the presence of an interface card
- */
-static int check_card(int port)
-{
-#undef N_RESPO
-#define N_RESPO 20
-	int i, j, k;
-	u_char response[N_RESPO];
-	u_char save_port0;
-	u_char save_port3;
-	
-	msg(DBG_INI,"check_card entered.\n");
-	save_port0=inb(port+0);
-	save_port3=inb(port+3);
-	
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		OUT(port+3,j) ; /* enable drive #j */
-		OUT(port+0,CMD0_PATH_CHECK);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=10000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
-		OUT(port+0,CMD0_PATH_CHECK);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0xFF;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=10000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
-
-		if (response[0]==0xAA)
-			if (response[1]==0x55)
-				return (0);
-	}
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		OUT(port+3,j) ; /* enable drive #j */
-		OUT(port+0,CMD2_READ_VER);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=1000000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
-
-		OUT(port+0,CMD2_READ_VER);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0xFF;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=1000000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
-
-		if (response[0]==0xAA)
-			if (response[1]==0x55)
-				return (0);
-	}
-	OUT(port+0,save_port0);
-	OUT(port+3,save_port3);
-	return (0); /* in any case - no real "function" at time */
-}
-#endif PATH_CHECK
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * probe for the presence of drives on the selected controller
- */
-static int check_drives(void)
-{
-	int i, j;
-	
-	msg(DBG_INI,"check_drives entered.\n");
-	ndrives=0;
-	for (j=0;j<MAX_DRIVES;j++)
-	{
-		D_S[ndrives].drv_id=j;
-		if (sbpro_type==1) D_S[ndrives].drv_sel=(j&0x01)<<1|(j&0x02)>>1;
-		else D_S[ndrives].drv_sel=j;
-		switch_drive(ndrives);
-		msg(DBG_INI,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
-		msg(DBG_000,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
-		i=check_version();
-		if (i<0) msg(DBG_INI,"check_version returns %d.\n",i);
-		else
-		{
-			D_S[d].drv_options=drv_pattern[j];
-			if (fam0L_drive) D_S[d].drv_options&=~(speed_auto|speed_300|speed_150);
-			msg(DBG_INF, "Drive %d (ID=%d): %.9s (%.4s) at 0x%03X (type %d)\n",
-			    d,
-			    D_S[d].drv_id,
-			    D_S[d].drive_model,
-			    D_S[d].firmware_version,
-			    CDo_command,
-			    sbpro_type);
-			ndrives++;
-		}
-	}
-	for (j=ndrives;j<NR_SBPCD;j++) D_S[j].drv_id=-1;
-	if (ndrives==0) return (-1);
-	return (0);
-}
-/*==========================================================================*/
-#if FUTURE
-/*
- *  obtain if requested service disturbs current audio state
- */            
-static int obey_audio_state(u_char audio_state, u_char func,u_char subfunc)
-{
-	switch (audio_state)                   /* audio status from controller  */
-	{
-	case aud_11: /* "audio play in progress" */
-	case audx11:
-		switch (func)                      /* DOS command code */
-		{
-		case cmd_07: /* input flush  */
-		case cmd_0d: /* open device  */
-		case cmd_0e: /* close device */
-		case cmd_0c: /* ioctl output */
-			return (1);
-		case cmd_03: /* ioctl input  */
-			switch (subfunc)
-				/* DOS ioctl input subfunction */
-			{
-			case cxi_00:
-			case cxi_06:
-			case cxi_09:
-				return (1);
-			default:
-				return (ERROR15);
-			}
-			return (1);
-		default:
-			return (ERROR15);
-		}
-		return (1);
-	case aud_12:                  /* "audio play paused"      */
-	case audx12:
-		return (1);
-	default:
-		return (2);
-	}
-}
-/*==========================================================================*/
-/* allowed is only
- * ioctl_o, flush_input, open_device, close_device, 
- * tell_address, tell_volume, tell_capabiliti,
- * tell_framesize, tell_CD_changed, tell_audio_posi
- */
-static int check_allowed1(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==ioctl_o) return (0);
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-	if (func1==audio_pause) return (-1);
-	if (func1==audio_resume) return (-1);
-	if (func1!=ioctl_i) return (0);
-	if (func2==tell_SubQ_run_tot) return (-1);
-	if (func2==tell_cdsize) return (-1);
-	if (func2==tell_TocDescrip) return (-1);
-	if (func2==tell_TocEntry) return (-1);
-	if (func2==tell_subQ_info) return (-1);
-	if (fam1_drive) if (func2==tell_SubChanInfo) return (-1);
-	if (func2==tell_UPC) return (-1);
-#else
-	return (0);
-#endif 000
-}
-/*==========================================================================*/
-static int check_allowed2(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-  if (func1!=ioctl_o) return (0);
-	if (fam1_drive)
-	{
-		if (func2==EjectDisk) return (-1);
-		if (func2==CloseTray) return (-1);
-	}
-#else
-	return (0);
-#endif 000
-}
-/*==========================================================================*/
-static int check_allowed3(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==ioctl_i)
-	{
-		if (func2==tell_address) return (0);
-		if (func2==tell_capabiliti) return (0);
-		if (func2==tell_CD_changed) return (0);
-		if (fam0L_drive) if (func2==tell_SubChanInfo) return (0);
-		return (-1);
-	}
-	if (func1==ioctl_o)
-	{
-		if (func2==DriveReset) return (0);
-		if (fam0L_drive)
-		{
-			if (func2==EjectDisk) return (0);
-			if (func2==LockDoor) return (0);
-	  if (func2==CloseTray) return (0);
-		}
-		return (-1);
-    }
-	if (func1==flush_input) return (-1);
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-	if (func1==audio_pause) return (-1);
-	if (func1==audio_resume) return (-1);
-#else
-	return (0);
-#endif 000
-}
-/*==========================================================================*/
-static int seek_pos_audio_end(void)
-{
-	int i;
-
-	i=msf2blk(D_S[d].pos_audio_end)-1;
-	if (i<0) return (-1);
-	i=cc_Seek(i,0);
-	return (i);
-}
-#endif FUTURE
-/*==========================================================================*/
-static int ReadToC(void)
-{
-	int i, j;
-	D_S[d].diskstate_flags &= ~toc_bit;
-	D_S[d].ored_ctl_adr=0;
-	for (j=D_S[d].n_first_track;j<=D_S[d].n_last_track;j++)
-	{
-		i=cc_ReadTocEntry(j);
-		if (i<0)
-		{
-			msg(DBG_INF,"cc_ReadTocEntry(%d) returns %d.\n",j,i);
-			return (i);
-		}
-		D_S[d].TocBuffer[j].nixbyte=D_S[d].TocEnt_nixbyte;
-		D_S[d].TocBuffer[j].ctl_adr=D_S[d].TocEnt_ctl_adr;
-		D_S[d].TocBuffer[j].number=D_S[d].TocEnt_number;
-		D_S[d].TocBuffer[j].format=D_S[d].TocEnt_format;
-		D_S[d].TocBuffer[j].address=D_S[d].TocEnt_address;
-		D_S[d].ored_ctl_adr |= D_S[d].TocEnt_ctl_adr;
-	}
-	/* fake entry for LeadOut Track */
-	D_S[d].TocBuffer[j].nixbyte=0;
-	D_S[d].TocBuffer[j].ctl_adr=0;
-	D_S[d].TocBuffer[j].number=CDROM_LEADOUT;
-	D_S[d].TocBuffer[j].format=0;
-	D_S[d].TocBuffer[j].address=D_S[d].size_msf;
-	
-	D_S[d].diskstate_flags |= toc_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int DiskInfo(void)
-{
-	int i, j;
-	
-	D_S[d].mode=READ_M1;
-	
-#undef LOOP_COUNT
-#define LOOP_COUNT 10 /* needed for some "old" drives */
-	
-	msg(DBG_000,"DiskInfo entered.\n");
-	for (j=1;j<LOOP_COUNT;j++)
-	{
-		i=SetSpeed();
-		if (i<0)
-		{
-			msg(DBG_INF,"DiskInfo: SetSpeed returns %d\n", i);
-			continue;
-		}
-		i=cc_ModeSense();
-		if (i<0)
-		{
-			msg(DBG_INF,"DiskInfo: cc_ModeSense returns %d\n", i);
-			continue;
-		}
-		i=cc_ReadCapacity();
-		if (i>=0) break;
-		msg(DBG_INF,"DiskInfo: ReadCapacity #%d returns %d\n", j, i);
-		i=cc_DriveReset();
-	}
-	if (j==LOOP_COUNT) return (-33); /* give up */
-	
-	i=cc_ReadTocDescr();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: ReadTocDescr returns %d\n", i);
-		return (i);
-	}
-	i=ReadToC();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: ReadToC returns %d\n", i);
-		return (i);
-	}
-	i=cc_CheckMultiSession();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: cc_CheckMultiSession returns %d\n", i);
-		return (i);
-	}
-	if (D_S[d].f_multisession) D_S[d].sbp_bufsiz=1;  /* possibly a weird PhotoCD */
-	else D_S[d].sbp_bufsiz=SBP_BUFFER_FRAMES;
-	i=cc_ReadTocEntry(D_S[d].n_first_track);
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: cc_ReadTocEntry(1) returns %d\n", i);
-		return (i);
-	}
-	i=cc_ReadUPC();
-	if (i<0) msg(DBG_INF,"DiskInfo: cc_ReadUPC returns %d\n", i);
-	if ((fam0L_drive) && (D_S[d].xa_byte==0x20))
-	{
-		/* XA disk with old drive */
-		cc_ModeSelect(CD_FRAMESIZE_RAW1);
-		cc_ModeSense();
-	}
-	if (famT_drive)	cc_prep_mode_T();
-	msg(DBG_000,"DiskInfo done.\n");
-	return (0);
-}
-/*==========================================================================*/
-#if FUTURE
-/*
- *  called always if driver gets entered
- *  returns 0 or ERROR2 or ERROR15
- */
-static int prepare(u_char func, u_char subfunc)
-{
-	int i;
-	
-	if (fam0L_drive)
-	{
-		i=inb(CDi_status);
-		if (i&s_attention) GetStatus();
-	}
-	else if (fam1_drive) GetStatus();
-	else if (fam2_drive) GetStatus();
-	else if (famT_drive) GetStatus();
-	if (D_S[d].CD_changed==0xFF)
-	{
-		D_S[d].diskstate_flags=0;
-		D_S[d].audio_state=0;
-		if (!st_diskok)
-		{
-			i=check_allowed1(func,subfunc);
-			if (i<0) return (-2);
-		}
-		else 
-		{
-			i=check_allowed3(func,subfunc);
-			if (i<0)
-			{
-				D_S[d].CD_changed=1;
-				return (-15);
-			}
-		}
-	}
-	else
-	{
-		if (!st_diskok)
-		{
-			D_S[d].diskstate_flags=0;
-			D_S[d].audio_state=0;
-			i=check_allowed1(func,subfunc);
-			if (i<0) return (-2);
-		}
-		else
-		{ 
-			if (st_busy)
-			{
-				if (D_S[d].audio_state!=audio_pausing)
-				{
-					i=check_allowed2(func,subfunc);
-					if (i<0) return (-2);
-				}
-			}
-			else
-			{
-				if (D_S[d].audio_state==audio_playing) seek_pos_audio_end();
-				D_S[d].audio_state=0;
-			}
-			if (!frame_size_valid)
-			{
-				i=DiskInfo();
-				if (i<0)
-				{
-					D_S[d].diskstate_flags=0;
-					D_S[d].audio_state=0;
-					i=check_allowed1(func,subfunc);
-					if (i<0) return (-2);
-				}
-			}
-		}
-    }
-	return (0);
-}
-#endif FUTURE
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * Check the results of the "get status" command.
- */
-static int sbp_status(void)
-{
-	int st;
-	
-	st=ResponseStatus();
-	if (st<0)
-	{
-		msg(DBG_INF,"sbp_status: timeout.\n");
-		return (0);
-	}
-	
-	if (!st_spinning) msg(DBG_SPI,"motor got off - ignoring.\n");
-	
-	if (st_check) 
-	{
-		msg(DBG_INF,"st_check detected - retrying.\n");
-		return (0);
-	}
-	if (!st_door_closed)
-	{
-		msg(DBG_INF,"door is open - retrying.\n");
-		return (0);
-	}
-	if (!st_caddy_in)
-	{
-		msg(DBG_INF,"disk removed - retrying.\n");
-		return (0);
-	}
-	if (!st_diskok) 
-	{
-		msg(DBG_INF,"!st_diskok detected - retrying.\n");
-		return (0);
-	}
-	if (st_busy) 
-	{
-		msg(DBG_INF,"st_busy detected - retrying.\n");
-		return (0);
-	}
-	return (1);
-}
-/*==========================================================================*/
-
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * ioctl support
- */
-static int sbpcd_ioctl(struct inode *inode, struct file *file, u_int cmd,
-		       u_long arg)
-{
-	int i, st;
-	
-	msg(DBG_IO2,"ioctl(%d, 0x%08lX, 0x%08lX)\n",
-	    MINOR(inode->i_rdev), cmd, arg);
-	if (!inode) return (-EINVAL);
-	i=MINOR(inode->i_rdev);
-	if ((i<0) || (i>=NR_SBPCD) || (D_S[i].drv_id==-1))
-	{
-		msg(DBG_INF, "ioctl: bad device: %04X\n", inode->i_rdev);
-		return (-ENXIO);             /* no such drive */
-	}
-	if (d!=i) switch_drive(i);
-	
-#if 0
-	st=GetStatus();
-	if (st<0) return (-EIO);
-	
-	if (!toc_valid)
-	{
-		i=DiskInfo();
-		if (i<0) return (-EIO);	/* error reading TOC */
-	}
-#endif
-	
-	msg(DBG_IO2,"ioctl: device %d, request %04X\n",i,cmd);
-	switch (cmd) 		/* Sun-compatible */
-	{
-	case DDIOCSDBG:		/* DDI Debug */
-		if (!suser()) return (-EPERM);
-		i=sbpcd_dbg_ioctl(arg,1);
-		return (i);
-		
-	case CDROMPAUSE:     /* Pause the drive */
-		msg(DBG_IOC,"ioctl: CDROMPAUSE entered.\n");
-		/* pause the drive unit when it is currently in PLAY mode,         */
-		/* or reset the starting and ending locations when in PAUSED mode. */
-		/* If applicable, at the next stopping point it reaches            */
-		/* the drive will discontinue playing.                             */
-		switch (D_S[d].audio_state)
-		{
-		case audio_playing:
-			if (famL_drive) i=cc_ReadSubQ();
-			else i=cc_Pause_Resume(1);
-			if (i<0) return (-EIO);
-			if (famL_drive) i=cc_Pause_Resume(1);
-			else i=cc_ReadSubQ();
-			if (i<0) return (-EIO);
-			D_S[d].pos_audio_start=D_S[d].SubQ_run_tot;
-			D_S[d].audio_state=audio_pausing;
-			return (0);
-		case audio_pausing:
-			i=cc_Seek(D_S[d].pos_audio_start,1);
-			if (i<0) return (-EIO);
-			return (0);
-		default:
-			return (-EINVAL);
-		}
-		
-	case CDROMRESUME: /* resume paused audio play */
-		msg(DBG_IOC,"ioctl: CDROMRESUME entered.\n");
-		/* resume playing audio tracks when a previous PLAY AUDIO call has  */
-		/* been paused with a PAUSE command.                                */
-		/* It will resume playing from the location saved in SubQ_run_tot.  */
-		if (D_S[d].audio_state!=audio_pausing) return -EINVAL;
-		if (famL_drive)
-			i=cc_PlayAudio(D_S[d].pos_audio_start,
-				       D_S[d].pos_audio_end);
-		else i=cc_Pause_Resume(3);
-		if (i<0) return (-EIO);
-		D_S[d].audio_state=audio_playing;
-		return (0);
-		
-	case CDROMPLAYMSF:
-		msg(DBG_IOC,"ioctl: CDROMPLAYMSF entered.\n");
-		if (D_S[d].audio_state==audio_playing)
-		{
-			i=cc_Pause_Resume(1);
-			if (i<0) return (-EIO);
-			i=cc_ReadSubQ();
-			if (i<0) return (-EIO);
-			D_S[d].pos_audio_start=D_S[d].SubQ_run_tot;
-			i=cc_Seek(D_S[d].pos_audio_start,1);
-		}
-		st=verify_area(VERIFY_READ, (void *) arg, sizeof(struct cdrom_msf));
-		if (st) return (st);
-		memcpy_fromfs(&msf, (void *) arg, sizeof(struct cdrom_msf));
-		/* values come as msf-bin */
-		D_S[d].pos_audio_start = (msf.cdmsf_min0<<16) |
-                        (msf.cdmsf_sec0<<8) |
-				msf.cdmsf_frame0;
-		D_S[d].pos_audio_end = (msf.cdmsf_min1<<16) |
-			(msf.cdmsf_sec1<<8) |
-				msf.cdmsf_frame1;
-		msg(DBG_IOX,"ioctl: CDROMPLAYMSF %08X %08X\n",
-		    D_S[d].pos_audio_start,D_S[d].pos_audio_end);
-		i=cc_PlayAudio(D_S[d].pos_audio_start,D_S[d].pos_audio_end);
-		msg(DBG_IOC,"ioctl: cc_PlayAudio returns %d\n",i);
-#if 0
-		if (i<0) return (-EIO);
-#endif 0
-		D_S[d].audio_state=audio_playing;
-		return (0);
-		
-	case CDROMPLAYTRKIND: /* Play a track.  This currently ignores index. */
-		msg(DBG_IOC,"ioctl: CDROMPLAYTRKIND entered.\n");
-		if (D_S[d].audio_state==audio_playing)
-		{
-			msg(DBG_IOX,"CDROMPLAYTRKIND: already audio_playing.\n");
-			return (0);
-			return (-EINVAL);
-		}
-		st=verify_area(VERIFY_READ,(void *) arg,sizeof(struct cdrom_ti));
-		if (st<0)
-		{
-			msg(DBG_IOX,"CDROMPLAYTRKIND: verify_area error.\n");
-			return (st);
-		}
-		memcpy_fromfs(&ti,(void *) arg,sizeof(struct cdrom_ti));
-		msg(DBG_IOX,"ioctl: trk0: %d, ind0: %d, trk1:%d, ind1:%d\n",
-		    ti.cdti_trk0,ti.cdti_ind0,ti.cdti_trk1,ti.cdti_ind1);
-		if (ti.cdti_trk0<D_S[d].n_first_track) return (-EINVAL);
-		if (ti.cdti_trk0>D_S[d].n_last_track) return (-EINVAL);
-		if (ti.cdti_trk1<ti.cdti_trk0) ti.cdti_trk1=ti.cdti_trk0;
-		if (ti.cdti_trk1>D_S[d].n_last_track) ti.cdti_trk1=D_S[d].n_last_track;
-		D_S[d].pos_audio_start=D_S[d].TocBuffer[ti.cdti_trk0].address;
-		D_S[d].pos_audio_end=D_S[d].TocBuffer[ti.cdti_trk1+1].address;
-		i=cc_PlayAudio(D_S[d].pos_audio_start,D_S[d].pos_audio_end);
-#if 0
-		if (i<0) return (-EIO);
-#endif 0
-		D_S[d].audio_state=audio_playing;
-		return (0);
-		
-	case CDROMREADTOCHDR:        /* Read the table of contents header */
-		msg(DBG_IOC,"ioctl: CDROMREADTOCHDR entered.\n");
-		tochdr.cdth_trk0=D_S[d].n_first_track;
-		tochdr.cdth_trk1=D_S[d].n_last_track;
-		st=verify_area(VERIFY_WRITE, (void *) arg, sizeof(struct cdrom_tochdr));
-		if (st) return (st);
-		memcpy_tofs((void *) arg, &tochdr, sizeof(struct cdrom_tochdr));
-		return (0);
-		
-	case CDROMREADTOCENTRY:      /* Read an entry in the table of contents */
-		msg(DBG_IOC,"ioctl: CDROMREADTOCENTRY entered.\n");
-		st=verify_area(VERIFY_READ, (void *) arg, sizeof(struct cdrom_tocentry));
-		if (st) return (st);
-		memcpy_fromfs(&tocentry, (void *) arg, sizeof(struct cdrom_tocentry));
-		i=tocentry.cdte_track;
-		if (i==CDROM_LEADOUT) i=D_S[d].n_last_track+1;
-		else if (i<D_S[d].n_first_track||i>D_S[d].n_last_track) return (-EINVAL);
-		tocentry.cdte_adr=D_S[d].TocBuffer[i].ctl_adr&0x0F;
-		tocentry.cdte_ctrl=(D_S[d].TocBuffer[i].ctl_adr>>4)&0x0F;
-		tocentry.cdte_datamode=D_S[d].TocBuffer[i].format;
-		if (tocentry.cdte_format==CDROM_MSF) /* MSF-bin required */
-		{
-			tocentry.cdte_addr.msf.minute=(D_S[d].TocBuffer[i].address>>16)&0x00FF;
-			tocentry.cdte_addr.msf.second=(D_S[d].TocBuffer[i].address>>8)&0x00FF;
-			tocentry.cdte_addr.msf.frame=D_S[d].TocBuffer[i].address&0x00FF;
-		}
-		else if (tocentry.cdte_format==CDROM_LBA) /* blk required */
-			tocentry.cdte_addr.lba=msf2blk(D_S[d].TocBuffer[i].address);
-		else return (-EINVAL);
-		st=verify_area(VERIFY_WRITE,(void *) arg, sizeof(struct cdrom_tocentry));
-		if (st) return (st);
-		memcpy_tofs((void *) arg, &tocentry, sizeof(struct cdrom_tocentry));
-		return (0);
-		
-	case CDROMRESET:      /* hard reset the drive */
-		msg(DBG_IOC,"ioctl: CDROMRESET entered.\n");
-		i=DriveReset();
-		D_S[d].audio_state=0;
-		return (i);
-		
-	case CDROMSTOP:      /* Spin down the drive */
-		msg(DBG_IOC,"ioctl: CDROMSTOP entered.\n");
-		i=cc_Pause_Resume(1);
-		D_S[d].audio_state=0;
-		return (i);
-		
-	case CDROMSTART:  /* Spin up the drive */
-		msg(DBG_IOC,"ioctl: CDROMSTART entered.\n");
-		cc_SpinUp();
-		D_S[d].audio_state=0;
-		return (0);
-		
-	case CDROMEJECT:
-		msg(DBG_IOC,"ioctl: CDROMEJECT entered.\n");
-		if (fam0_drive) return (0);
-		if (D_S[d].open_count>1) return (-EBUSY);
-		i=UnLockDoor();
-		D_S[d].open_count=-9; /* to get it locked next time again */
-		i=cc_SpinDown();
-		msg(DBG_IOX,"ioctl: cc_SpinDown returned %d.\n", i);
-		msg(DBG_TEA,"ioctl: cc_SpinDown returned %d.\n", i);
-		if (i<0) return (-EIO);
-		D_S[d].CD_changed=0xFF;
-		D_S[d].diskstate_flags=0;
-		D_S[d].audio_state=0;
-		return (0);
-		
-	case CDROMEJECT_SW:
-		msg(DBG_IOC,"ioctl: CDROMEJECT_SW entered.\n");
-		if (fam0_drive) return (0);
-		D_S[d].f_eject=arg;
-		return (0);
-		
-	case CDROMVOLCTRL:   /* Volume control */
-		msg(DBG_IOC,"ioctl: CDROMVOLCTRL entered.\n");
-		st=verify_area(VERIFY_READ,(void *) arg,sizeof(volctrl));
-		if (st) return (st);
-		memcpy_fromfs(&volctrl,(char *) arg,sizeof(volctrl));
-		D_S[d].vol_chan0=0;
-		D_S[d].vol_ctrl0=volctrl.channel0;
-		D_S[d].vol_chan1=1;
-		D_S[d].vol_ctrl1=volctrl.channel1;
-		i=cc_SetVolume();
-		return (0);
-		
-	case CDROMVOLREAD:   /* read Volume settings from drive */
-		msg(DBG_IOC,"ioctl: CDROMVOLREAD entered.\n");
-		st=verify_area(VERIFY_WRITE,(void *)arg,sizeof(volctrl));
-		if (st) return (st);
-		st=cc_GetVolume();
-		if (st<0) return (st);
-		volctrl.channel0=D_S[d].vol_ctrl0;
-		volctrl.channel1=D_S[d].vol_ctrl1;
-		volctrl.channel2=0;
-		volctrl.channel2=0;
-		memcpy_tofs((void *)arg,&volctrl,sizeof(volctrl));
-		return (0);
-
-	case CDROMSUBCHNL:   /* Get subchannel info */
-		msg(DBG_IOS,"ioctl: CDROMSUBCHNL entered.\n");
-		if ((st_spinning)||(!subq_valid)) { i=cc_ReadSubQ();
-						    if (i<0) return (-EIO);
-					    }
-		st=verify_area(VERIFY_WRITE, (void *) arg, sizeof(struct cdrom_subchnl));
-		if (st)	return (st);
-		st=verify_area(VERIFY_READ, (void *) arg, sizeof(struct cdrom_subchnl));
-		if (st) return (st);
-		memcpy_fromfs(&SC, (void *) arg, sizeof(struct cdrom_subchnl));
-		switch (D_S[d].audio_state)
-		{
-		case audio_playing:
-			SC.cdsc_audiostatus=CDROM_AUDIO_PLAY;
-			break;
-		case audio_pausing:
-			SC.cdsc_audiostatus=CDROM_AUDIO_PAUSED;
-			break;
-		default:
-			SC.cdsc_audiostatus=CDROM_AUDIO_NO_STATUS;
-			break;
-		}
-		SC.cdsc_adr=D_S[d].SubQ_ctl_adr;
-		SC.cdsc_ctrl=D_S[d].SubQ_ctl_adr>>4;
-		SC.cdsc_trk=bcd2bin(D_S[d].SubQ_trk);
-		SC.cdsc_ind=bcd2bin(D_S[d].SubQ_pnt_idx);
-		if (SC.cdsc_format==CDROM_LBA)
-		{
-			SC.cdsc_absaddr.lba=msf2blk(D_S[d].SubQ_run_tot);
-			SC.cdsc_reladdr.lba=msf2blk(D_S[d].SubQ_run_trk);
-		}
-		else /* not only if (SC.cdsc_format==CDROM_MSF) */
-		{
-			SC.cdsc_absaddr.msf.minute=(D_S[d].SubQ_run_tot>>16)&0x00FF;
-			SC.cdsc_absaddr.msf.second=(D_S[d].SubQ_run_tot>>8)&0x00FF;
-			SC.cdsc_absaddr.msf.frame=D_S[d].SubQ_run_tot&0x00FF;
-			SC.cdsc_reladdr.msf.minute=(D_S[d].SubQ_run_trk>>16)&0x00FF;
-			SC.cdsc_reladdr.msf.second=(D_S[d].SubQ_run_trk>>8)&0x00FF;
-			SC.cdsc_reladdr.msf.frame=D_S[d].SubQ_run_trk&0x00FF;
-		}
-		memcpy_tofs((void *) arg, &SC, sizeof(struct cdrom_subchnl));
-		msg(DBG_IOS,"CDROMSUBCHNL: %1X %02X %08X %08X %02X %02X %06X %06X\n",
-		    SC.cdsc_format,SC.cdsc_audiostatus,
-		    SC.cdsc_adr,SC.cdsc_ctrl,
-		    SC.cdsc_trk,SC.cdsc_ind,
-		    SC.cdsc_absaddr,SC.cdsc_reladdr);
-		return (0);
-		
-	case CDROMREADMODE1:
-		msg(DBG_IOC,"ioctl: CDROMREADMODE1 requested.\n");
-		cc_ModeSelect(CD_FRAMESIZE);
-		cc_ModeSense();
-		D_S[d].mode=READ_M1;
-		return (0);
-		
-	case CDROMREADMODE2: /* not usable at the moment */
-		msg(DBG_IOC,"ioctl: CDROMREADMODE2 requested.\n");
-		cc_ModeSelect(CD_FRAMESIZE_RAW1);
-		cc_ModeSense();
-		D_S[d].mode=READ_M2;
-		return (0);
-		
-	case CDROMAUDIOBUFSIZ: /* configure the audio buffer size */
-		msg(DBG_IOC,"ioctl: CDROMAUDIOBUFSIZ entered.\n");
-#ifdef MODULE
-		if (D_S[d].sbp_audsiz>0)
-			vfree(D_S[d].aud_buf);
-#endif MODULE
-		D_S[d].aud_buf=NULL;
-		D_S[d].sbp_audsiz=arg;
-		if (D_S[d].sbp_audsiz>0)
-		{
-			D_S[d].aud_buf=(u_char *) vmalloc(D_S[d].sbp_audsiz*CD_FRAMESIZE_RAW);
-			if (D_S[d].aud_buf==NULL)
-			{
-				msg(DBG_INF,"audio buffer (%d frames) not available.\n",D_S[d].sbp_audsiz);
-				D_S[d].sbp_audsiz=0;
-			}
-			else msg(DBG_INF,"audio buffer size: %d frames.\n",D_S[d].sbp_audsiz);
-		}
-		return (D_S[d].sbp_audsiz);
-
-	case CDROMREADAUDIO:
-	{ /* start of CDROMREADAUDIO */
-		int i=0, j=0, frame, block;
-		u_int try=0;
-		u_long timeout;
-		u_char *p;
-		u_int data_tries = 0;
-		u_int data_waits = 0;
-		u_int data_retrying = 0;
-		int status_tries;
-		int error_flag;
-		
-		msg(DBG_IOC,"ioctl: CDROMREADAUDIO entered.\n");
-		if (fam0_drive) return (-EINVAL);
-		if (famL_drive) return (-EINVAL);
-		if (fam2_drive) return (-EINVAL);
-		if (famT_drive) return (-EINVAL);
-		if (D_S[d].aud_buf==NULL) return (-EINVAL);
-		i=verify_area(VERIFY_READ, (void *) arg, sizeof(struct cdrom_read_audio));
-		if (i) return (i);
-		memcpy_fromfs(&read_audio, (void *) arg, sizeof(struct cdrom_read_audio));
-		if (read_audio.nframes>D_S[d].sbp_audsiz) return (-EINVAL);
-		i=verify_area(VERIFY_WRITE, read_audio.buf,
-			      read_audio.nframes*CD_FRAMESIZE_RAW);
-		if (i) return (i);
-		
-		if (read_audio.addr_format==CDROM_MSF) /* MSF-bin specification of where to start */
-			block=msf2lba(&read_audio.addr.msf.minute);
-		else if (read_audio.addr_format==CDROM_LBA) /* lba specification of where to start */
-			block=read_audio.addr.lba;
-		else return (-EINVAL);
-		i=cc_SetSpeed(speed_150,0,0);
-		if (i) msg(DBG_AUD,"read_audio: SetSpeed error %d\n", i);
-		msg(DBG_AUD,"read_audio: lba: %d, msf: %06X\n",
-		    block, blk2msf(block));
-		msg(DBG_AUD,"read_audio: before cc_ReadStatus.\n");
-		while (busy_data) sbp_sleep(HZ/10); /* wait a bit */
-		busy_audio=1;
-		error_flag=0;
-		for (data_tries=5; data_tries>0; data_tries--)
-		{
-			msg(DBG_AUD,"data_tries=%d ...\n", data_tries);
-			D_S[d].mode=READ_AU;
-			cc_ModeSelect(CD_FRAMESIZE_RAW);
-			cc_ModeSense();
-			for (status_tries=3; status_tries > 0; status_tries--)
-			{
-				flags_cmd_out |= f_respo3;
-				cc_ReadStatus();
-				if (sbp_status() != 0) break;
-				sbp_sleep(1);    /* wait a bit, try again */
-			}
-			if (status_tries == 0)
-			{
-				msg(DBG_AUD,"read_audio: sbp_status: failed after 3 tries.\n");
-				continue;
-			}
-			msg(DBG_AUD,"read_audio: sbp_status: ok.\n");
-			
-			flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
-			if (fam0L_drive)
-			{
-				flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
-				cmd_type=READ_M2;
-				drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
-				drvcmd[1]=(block>>16)&0x000000ff;
-				drvcmd[2]=(block>>8)&0x000000ff;
-				drvcmd[3]=block&0x000000ff;
-				drvcmd[4]=0;
-				drvcmd[5]=read_audio.nframes; /* # of frames */
-				drvcmd[6]=0;
-			}
-			else if (fam1_drive)
-			{
-				drvcmd[0]=CMD1_READ; /* "read frames", new drives */
-				lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-				drvcmd[4]=0;
-				drvcmd[5]=0;
-				drvcmd[6]=read_audio.nframes; /* # of frames */
-			}
-			else if (fam2_drive) /* CD200: not tested yet */
-			{
-			}
-			else if (famT_drive) /* CD-55A: not tested yet */
-			{
-			}
-			msg(DBG_AUD,"read_audio: before giving \"read\" command.\n");
-			for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]);
-			sbp_sleep(0);
-			msg(DBG_AUD,"read_audio: after giving \"read\" command.\n");
-			for (frame=1;frame<2 && !error_flag; frame++)
-			{
-				try=maxtim_data;
-				for (timeout=jiffies+9*HZ; ; )
-				{
-					for ( ; try!=0;try--)
-					{
-						j=inb(CDi_status);
-						if (!(j&s_not_data_ready)) break;
-						if (!(j&s_not_result_ready)) break;
-						if (fam0L_drive) if (j&s_attention) break;
-					}
-					if (try != 0 || timeout <= jiffies) break;
-					if (data_retrying == 0) data_waits++;
-					data_retrying = 1;
-					sbp_sleep(1);
-					try = 1;
-				}
-				if (try==0)
-				{
-					msg(DBG_INF,"read_audio: sbp_data: CDi_status timeout.\n");
-					error_flag++;
-					break;
-				}
-				msg(DBG_AUD,"read_audio: sbp_data: CDi_status ok.\n");
-				if (j&s_not_data_ready)
-				{
-					msg(DBG_INF, "read_audio: sbp_data: DATA_READY timeout.\n");
-					error_flag++;
-					break;
-				}
-				msg(DBG_AUD,"read_audio: before reading data.\n");
-				error_flag=0;
-				p = D_S[d].aud_buf;
-				if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-				insb(CDi_data, p, read_audio.nframes*CD_FRAMESIZE_RAW);
-				if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-				data_retrying = 0;
-			}
-			msg(DBG_AUD,"read_audio: after reading data.\n");
-			if (error_flag)    /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
-			{
-				msg(DBG_AUD,"read_audio: read aborted by drive\n");
-#if 0000
-				i=cc_DriveReset();                /* ugly fix to prevent a hang */
-#else
-				i=cc_ReadError();
-#endif 0000
-				continue;
-			}
-			if (fam0L_drive)
-			{
-				i=maxtim_data;
-				for (timeout=jiffies+9*HZ; timeout > jiffies; timeout--)
-				{
-					for ( ;i!=0;i--)
-					{
-						j=inb(CDi_status);
-						if (!(j&s_not_data_ready)) break;
-						if (!(j&s_not_result_ready)) break;
-						if (j&s_attention) break;
-					}
-					if (i != 0 || timeout <= jiffies) break;
-					sbp_sleep(0);
-					i = 1;
-				}
-				if (i==0) msg(DBG_AUD,"read_audio: STATUS TIMEOUT AFTER READ");
-				if (!(j&s_attention))
-				{
-					msg(DBG_AUD,"read_audio: sbp_data: timeout waiting DRV_ATTN - retrying\n");
-					i=cc_DriveReset();  /* ugly fix to prevent a hang */
-					continue;
-				}
-			}
-			do
-			{
-				if (fam0L_drive) cc_ReadStatus();
-				i=ResponseStatus();  /* builds status_bits, returns orig. status (old) or faked p_success (new) */
-				if (i<0) { msg(DBG_AUD,
-					       "read_audio: cc_ReadStatus error after read: %02X\n",
-					       D_S[d].status_bits);
-					   continue; /* FIXME */
-				   }
-			}
-			while ((fam0L_drive)&&(!st_check)&&(!(i&p_success)));
-			if (st_check)
-			{
-				i=cc_ReadError();
-				msg(DBG_AUD,"read_audio: cc_ReadError was necessary after read: %02X\n",i);
-				continue;
-			}
-			memcpy_tofs((u_char *) read_audio.buf,
-				    (u_char *) D_S[d].aud_buf,
-				    read_audio.nframes*CD_FRAMESIZE_RAW);
-			msg(DBG_AUD,"read_audio: memcpy_tofs done.\n");
-			break;
-		}
-		cc_ModeSelect(CD_FRAMESIZE);
-		cc_ModeSense();
-		D_S[d].mode=READ_M1;
-		busy_audio=0;
-		if (data_tries == 0)
-		{
-			msg(DBG_AUD,"read_audio: failed after 5 tries.\n");
-			return (-8);
-		}
-		msg(DBG_AUD,"read_audio: successful return.\n");
-		return (0);
-	} /* end of CDROMREADAUDIO */
-		
-	case CDROMMULTISESSION: /* tell start-of-last-session */
-		msg(DBG_IOC,"ioctl: CDROMMULTISESSION entered.\n");
-		st=verify_area(VERIFY_READ, (void *) arg, sizeof(struct cdrom_multisession));
-		if (st) return (st);
-		memcpy_fromfs(&ms_info, (void *) arg, sizeof(struct cdrom_multisession));
-		if (ms_info.addr_format==CDROM_MSF) /* MSF-bin requested */
-			lba2msf(D_S[d].lba_multi,&ms_info.addr.msf.minute);
-		else if (ms_info.addr_format==CDROM_LBA) /* lba requested */
-			ms_info.addr.lba=D_S[d].lba_multi;
-		else return (-EINVAL);
-		if (D_S[d].f_multisession) ms_info.xa_flag=1; /* valid redirection address */
-		else ms_info.xa_flag=0; /* invalid redirection address */
-		st=verify_area(VERIFY_WRITE,(void *) arg, sizeof(struct cdrom_multisession));
-		if (st) return (st);
-		memcpy_tofs((void *) arg, &ms_info, sizeof(struct cdrom_multisession));
-		msg(DBG_MUL,"ioctl: CDROMMULTISESSION done (%d, %08X).\n",
-		    ms_info.xa_flag, ms_info.addr.lba);
-		return (0);
-		
-	case BLKRASET:
-		if(!suser())  return -EACCES;
-		if(!(inode->i_rdev)) return -EINVAL;
-		if(arg > 0xff) return -EINVAL;
-		read_ahead[MAJOR(inode->i_rdev)] = arg;
-		return (0);
-		
-	default:
-		msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
-		return (-EINVAL);
-	} /* end switch(cmd) */
-}
-/*==========================================================================*/
-/*
- *  Take care of the different block sizes between cdrom and Linux.
- */
-static void sbp_transfer(void)
-{
-	long offs;
-	
-	while ( (CURRENT->nr_sectors > 0) &&
-	       (CURRENT->sector/4 >= D_S[d].sbp_first_frame) &&
-	       (CURRENT->sector/4 <= D_S[d].sbp_last_frame) )
-	{
-		offs = (CURRENT->sector - D_S[d].sbp_first_frame * 4) * 512;
-		memcpy(CURRENT->buffer, D_S[d].sbp_buf + offs, 512);
-		CURRENT->nr_sectors--;
-		CURRENT->sector++;
-		CURRENT->buffer += 512;
-	}
-}
-/*==========================================================================*/
-/*
- *  I/O request routine, called from Linux kernel.
- */
-static void DO_SBPCD_REQUEST(void)
-{
-	u_int block;
-	u_int nsect;
-	int i, status_tries, data_tries;
-	
- request_loop:
-	INIT_REQUEST;
-	sti();
-	
-	if ((CURRENT == NULL) || CURRENT->rq_status == RQ_INACTIVE)
-		goto err_done;
-	if (CURRENT -> sector == -1)
-		goto err_done;
-	if (CURRENT->cmd != READ)
-	{
-		msg(DBG_INF, "bad cmd %d\n", CURRENT->cmd);
-		goto err_done;
-	}
-	i = MINOR(CURRENT->rq_dev);
-	if ( (i<0) || (i>=NR_SBPCD) || (D_S[i].drv_id==-1))
-	{
-		msg(DBG_INF, "do_request: bad device: %s\n",
-			kdevname(CURRENT->rq_dev));
-		goto err_done;
-	}
-	while (busy_audio) sbp_sleep(HZ); /* wait a bit */
-	busy_data=1;
-	
-	if (D_S[i].audio_state==audio_playing) goto err_done;
-	if (d!=i) switch_drive(i);
-	
-	block = CURRENT->sector; /* always numbered as 512-byte-pieces */
-	nsect = CURRENT->nr_sectors; /* always counted as 512-byte-pieces */
-	
-	msg(DBG_BSZ,"read sector %d (%d sectors)\n", block, nsect);
-#if 0
-	msg(DBG_MUL,"read LBA %d\n", block/4);
-#endif
-	
-	sbp_transfer();
-	/* if we satisfied the request from the buffer, we're done. */
-	if (CURRENT->nr_sectors == 0)
-	{
-		end_request(1);
-		goto request_loop;
-	}
-
-#if FUTURE
-	i=prepare(0,0); /* at moment not really a hassle check, but ... */
-	if (i!=0)
-		msg(DBG_INF,"\"prepare\" tells error %d -- ignored\n", i);
-#endif FUTURE
-	
-	if (!st_spinning) cc_SpinUp();
-	
-	for (data_tries=n_retries; data_tries > 0; data_tries--)
-	{
-		for (status_tries=3; status_tries > 0; status_tries--)
-		{
-			flags_cmd_out |= f_respo3;
-			cc_ReadStatus();
-			if (sbp_status() != 0) break;
-			if (st_check) cc_ReadError();
-			sbp_sleep(1);    /* wait a bit, try again */
-		}
-		if (status_tries == 0)
-		{
-			msg(DBG_INF,"sbp_status: failed after 3 tries\n");
-			break;
-		}
-		
-		sbp_read_cmd();
-		sbp_sleep(0);
-		if (sbp_data() != 0)
-		{
-			end_request(1);
-			goto request_loop;
-		}
-	}
-	
- err_done:
-	busy_data=0;
-	end_request(0);
-	sbp_sleep(0);    /* wait a bit, try again */
-	goto request_loop;
-}
-/*==========================================================================*/
-/*
- *  build and send the READ command.
- */
-static void sbp_read_cmd(void)
-{
-#undef OLD
-
-	int i;
-	int block;
-	
-	D_S[d].sbp_first_frame=D_S[d].sbp_last_frame=-1;      /* purge buffer */
-	D_S[d].sbp_current = 0;
-	block=CURRENT->sector/4;
-	if (block+D_S[d].sbp_bufsiz <= D_S[d].CDsize_frm)
-		D_S[d].sbp_read_frames = D_S[d].sbp_bufsiz;
-	else
-	{
-		D_S[d].sbp_read_frames=D_S[d].CDsize_frm-block;
-		/* avoid reading past end of data */
-		if (D_S[d].sbp_read_frames < 1)
-		{
-			msg(DBG_INF,"requested frame %d, CD size %d ???\n",
-			    block, D_S[d].CDsize_frm);
-			D_S[d].sbp_read_frames=1;
-		}
-	}
-	
-	flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
-	clr_cmdbuf();
-	if (fam0L_drive)
-	{
-		flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
-		if (D_S[d].xa_byte==0x20)
-		{
-			cmd_type=READ_M2;
-			drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
-			drvcmd[1]=(block>>16)&0x000000ff;
-			drvcmd[2]=(block>>8)&0x000000ff;
-			drvcmd[3]=block&0x000000ff;
-			drvcmd[5]=D_S[d].sbp_read_frames;
-		}
-		else
-		{
-			drvcmd[0]=CMD0_READ; /* "read frames", old drives */
-			if (D_S[d].drv_type>=drv_201)
-			{
-				lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
-				bin2bcdx(&drvcmd[1]);
-				bin2bcdx(&drvcmd[2]);
-				bin2bcdx(&drvcmd[3]);
-			}
-			else
-			{
-				drvcmd[1]=(block>>16)&0x000000ff;
-				drvcmd[2]=(block>>8)&0x000000ff;
-				drvcmd[3]=block&0x000000ff;
-			}
-			drvcmd[5]=D_S[d].sbp_read_frames;
-			drvcmd[6]=(D_S[d].drv_type<drv_201)?0:2; /* flag "lba or msf-bcd format" */
-		}
-	}
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READ;
-		lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-		drvcmd[6]=D_S[d].sbp_read_frames;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_READ;
-		lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-		drvcmd[5]=D_S[d].sbp_read_frames;
-		drvcmd[6]=0x02;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_READ;
-		drvcmd[2]=(block>>24)&0x0ff;
-		drvcmd[3]=(block>>16)&0x0ff;
-		drvcmd[4]=(block>>8)&0x0ff;
-		drvcmd[5]=block&0x0ff;
-		drvcmd[7]=(D_S[d].sbp_read_frames>>8)&0x0ff;
-		drvcmd[8]=D_S[d].sbp_read_frames&0x0ff;
-	}
-#ifdef OLD
-	SBPCD_CLI;
-	for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]);
-	if (famT_drive) for (i=7;i<10;i++) OUT(CDo_command,drvcmd[i]);
-	SBPCD_STI;
-#else
-	flags_cmd_out=f_putcmd;
-	response_count=0;
-	i=cmd_out(); /* immediate return here - read data "ourselves" */
-	if (i<0) msg(DBG_INF,"error giving READ command: %0d\n", i);
-#endif OLD
-	return;
-}
-/*==========================================================================*/
-/*
- *  Check the completion of the read-data command.  On success, read
- *  the D_S[d].sbp_bufsiz * 2048 bytes of data from the disk into buffer.
- */
-static int sbp_data(void)
-{
-	int i=0, j=0, l, frame;
-	u_int try=0;
-	u_long timeout;
-	u_char *p;
-	u_int data_tries = 0;
-	u_int data_waits = 0;
-	u_int data_retrying = 0;
-	int error_flag;
-	int xa_count;
-	int max_latency;
-	int success;
-	int wait;
-	int duration;
-	
-	error_flag=0;
-	success=0;
-#if LONG_TIMING
-	max_latency=9*HZ;
-#else
-	if (D_S[d].f_multisession) max_latency=9*HZ;
-	else max_latency=3*HZ;
-#endif
-	msg(DBG_TE2,"beginning to READ\n");
-	duration=jiffies;
-	for (frame=0;frame<D_S[d].sbp_read_frames&&!error_flag; frame++)
-	{
-		SBPCD_CLI;
-		
-		del_timer(&data_timer);
-		data_timer.expires=jiffies+max_latency;
-		timed_out_data=0;
-		add_timer(&data_timer);
-		while (!timed_out_data) 
-		{
-			if (D_S[d].f_multisession) try=maxtim_data*4;
-			else try=maxtim_data;
-			msg(DBG_000,"sbp_data: CDi_status loop: try=%d.\n",try);
-			for ( ; try!=0;try--)
-			{
-				j=inb(CDi_status);
-				if (!(j&s_not_data_ready)) break;;
-				if (!(j&s_not_result_ready)) break;
-				if (fam0L_drive) if (j&s_attention) break;
-			}
-			if (!(j&s_not_data_ready)) goto data_ready;
-			if (try==0)
-			{
-				if (data_retrying == 0) data_waits++;
-				data_retrying = 1;
-				msg(DBG_000,"sbp_data: CDi_status loop: sleeping.\n");
-				sbp_sleep(1);
-				try = 1;
-			}
-		}
-		msg(DBG_INF,"sbp_data: CDi_status loop expired.\n");
-	data_ready:
-		del_timer(&data_timer);
-
-		if (timed_out_data)
-		{
-			msg(DBG_INF,"sbp_data: CDi_status timeout (timed_out_data) (%02X).\n", j);
-			error_flag++;
-			break;
-		}
-		if (try==0)
-		{
-			msg(DBG_INF,"sbp_data: CDi_status timeout (try=0) (%02X).\n", j);
-			error_flag++;
-			break;
-		}
-		if (!(j&s_not_result_ready))
-		{
-			msg(DBG_INF, "sbp_data: RESULT_READY where DATA_READY awaited (%02X).\n", j);
-			response_count=20;
-			j=ResponseInfo();
-			j=inb(CDi_status);
-		}
-		if (j&s_not_data_ready)
-		{
-			if ((D_S[d].ored_ctl_adr&0x40)==0)
-				msg(DBG_INF, "CD contains no data tracks.\n");
-			else msg(DBG_INF, "sbp_data: DATA_READY timeout (%02X).\n", j);
-			error_flag++;
-			break;
-		}
-		SBPCD_STI;
-		error_flag=0;
-		msg(DBG_000, "sbp_data: beginning to read.\n");
-		p = D_S[d].sbp_buf + frame *  CD_FRAMESIZE;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-		if (cmd_type==READ_M2) insb(CDi_data, xa_head_buf, CD_XA_HEAD);
-		insb(CDi_data, p, CD_FRAMESIZE);
-		if (cmd_type==READ_M2) insb(CDi_data, xa_tail_buf, CD_XA_TAIL);
-		if (famT_drive)	msg(DBG_TE2, "================frame read=================.\n");
-		D_S[d].sbp_current++;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-		if (cmd_type==READ_M2)
-		{
-			for (xa_count=0;xa_count<CD_XA_HEAD;xa_count++)
-				sprintf(&msgbuf[xa_count*3], " %02X", xa_head_buf[xa_count]);
-			msgbuf[xa_count*3]=0;
-			msg(DBG_XA1,"xa head:%s\n", msgbuf);
-		}
-		data_retrying = 0;
-		data_tries++;
-		if (data_tries >= 1000)
-		{
-			msg(DBG_INF,"sbp_data() statistics: %d waits in %d frames.\n", data_waits, data_tries);
-			data_waits = data_tries = 0;
-		}
-	}
-	duration=jiffies-duration;
-	msg(DBG_TE2,"time to read %d frames: %d jiffies .\n",frame,duration);
-	if (famT_drive)
-	{
-		wait=8;
-		do
-		{
-			sbp_sleep(1);
-			OUT(CDo_sel_i_d,0);
-			i=inb(CDi_status);
-			if (!(i&s_not_data_ready))
-			{
-				OUT(CDo_sel_i_d,1);
-				j=0;
-				do
-				{
-					i=inb(CDi_data);
-					j++;
-					i=inb(CDi_status);
-				}
-				while (!(i&s_not_data_ready));
-				msg(DBG_TEA, "=============too much data (%d bytes)=================.\n", j);
-			}
-			if (!(i&s_not_result_ready))
-			{
-				OUT(CDo_sel_i_d,0);
-				l=0;
-				do
-				{
-					infobuf[l++]=inb(CDi_info);
-					i=inb(CDi_status);
-				}
-				while (!(i&s_not_result_ready));
-				if (infobuf[0]==0x00) success=1;
-#if 1
-				for (j=0;j<l;j++) sprintf(&msgbuf[j*3], " %02X", infobuf[j]);
-				msgbuf[j*3]=0;
-				msg(DBG_TE2,"sbp_data info response:%s\n", msgbuf);
-#endif
-				if (infobuf[0]==0x02)
-				{
-					error_flag++;
-					do
-					{
-						++recursion;
-						if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (sbp_data): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n",recursion);
-						else msg(DBG_TEA,"sbp_data: CMDT_READ_ERR necessary.\n");
-						clr_cmdbuf();
-						drvcmd[0]=CMDT_READ_ERR;
-						j=cmd_out_T(); /* !!! recursive here !!! */
-						--recursion;
-						sbp_sleep(1);
-					}
-					while (j<0);
-					D_S[d].error_state=infobuf[2];
-					D_S[d].b3=infobuf[3];
-					D_S[d].b4=infobuf[4];
-				}
-				break;
-			}
-			else
-			{
-#if 0
-				msg(DBG_TEA, "============= waiting for result=================.\n");
-				sbp_sleep(1);
-#endif
-			}
-		}
-		while (wait--);
-	}
-
-	if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
-	{
-		msg(DBG_TEA, "================error flag: %d=================.\n", error_flag);
-		msg(DBG_INF,"sbp_data: read aborted by drive.\n");
-#if 1
-		i=cc_DriveReset(); /* ugly fix to prevent a hang */
-#else
-		i=cc_ReadError();
-#endif
-		return (0);
-	}
-	
-	if (fam0L_drive)
-	{
-		SBPCD_CLI;
-		i=maxtim_data;
-		for (timeout=jiffies+HZ; timeout > jiffies; timeout--)
-		{
-			for ( ;i!=0;i--)
-			{
-				j=inb(CDi_status);
-				if (!(j&s_not_data_ready)) break;
-				if (!(j&s_not_result_ready)) break;
-				if (j&s_attention) break;
-			}
-			if (i != 0 || timeout <= jiffies) break;
-			sbp_sleep(0);
-			i = 1;
-		}
-		if (i==0) msg(DBG_INF,"status timeout after READ.\n");
-		if (!(j&s_attention))
-		{
-			msg(DBG_INF,"sbp_data: timeout waiting DRV_ATTN - retrying.\n");
-			i=cc_DriveReset();  /* ugly fix to prevent a hang */
-			SBPCD_STI;
-			return (0);
-		}
-		SBPCD_STI;
-	}
-	
-#if 0
-	if (!success)
-#endif 0
-		do
-		{
-			if (fam0L_drive) cc_ReadStatus();
-#if 1
-			if (famT_drive) msg(DBG_TE2, "================before ResponseStatus=================.\n", i);
-#endif 1
-			i=ResponseStatus();  /* builds status_bits, returns orig. status (old) or faked p_success (new) */
-#if 1
-			if (famT_drive)	msg(DBG_TE2, "================ResponseStatus: %d=================.\n", i);
-#endif 1
-			if (i<0)
-			{
-				msg(DBG_INF,"bad cc_ReadStatus after read: %02X\n", D_S[d].status_bits);
-				return (0);
-			}
-		}
-		while ((fam0L_drive)&&(!st_check)&&(!(i&p_success)));
-	if (st_check)
-	{
-		i=cc_ReadError();
-		msg(DBG_INF,"cc_ReadError was necessary after read: %d\n",i);
-		return (0);
-	}
-	if (fatal_err)
-	{
-		fatal_err=0;
-		D_S[d].sbp_first_frame=D_S[d].sbp_last_frame=-1;      /* purge buffer */
-		D_S[d].sbp_current = 0;
-		msg(DBG_INF,"sbp_data: fatal_err - retrying.\n");
-		return (0);
-	}
-	
-	D_S[d].sbp_first_frame = CURRENT -> sector / 4;
-	D_S[d].sbp_last_frame = D_S[d].sbp_first_frame + D_S[d].sbp_read_frames - 1;
-	sbp_transfer();
-#if 1
-	if (famT_drive)	msg(DBG_TE2, "================sbp_transfer() done=================.\n");
-#endif 1
-	return (1);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- *  Open the device special file.  Check that a disk is in. Read TOC.
- */
-static int sbpcd_open(struct inode *ip, struct file *fp)
-{
-	int i;
-	
-	i = MINOR(ip->i_rdev);
-	if ((i<0) || (i>=NR_SBPCD) || (D_S[i].drv_id==-1))
-	{
-		msg(DBG_INF, "open: bad device: %04X\n", ip->i_rdev);
-		return (-ENXIO);             /* no such drive */
-	}
-	if (fp->f_mode & 2)
-		return -EROFS;
-	
-	switch_drive(i);
-	
-	i=cc_ReadError();
-	flags_cmd_out |= f_respo2;
-	cc_ReadStatus();                         /* command: give 1-byte status */
-	i=ResponseStatus();
-	if (famT_drive&&(i<0))
-	{
-		cc_DriveReset();
-		i=ResponseStatus();
-		i=ResponseStatus();
-	}
-	if (i<0)
-	{
-		msg(DBG_INF,"sbpcd_open: ResponseStatus timed out (%d).\n",i);
-		return (-EIO);                  /* drive doesn't respond */
-	}
-	if (famT_drive)	msg(DBG_TE2,"sbpcd_open: ResponseStatus=%02X\n", i);
-	if (!st_door_closed)
-	{
-		if (famT_drive)	msg(DBG_TE2,"sbpcd_open: !st_door_closed.\n");
-		cc_CloseTray();
-		flags_cmd_out |= f_respo2;
-		cc_ReadStatus();
-		i=ResponseStatus();
-	}
-	if (!(famT_drive))
-		if (!st_spinning)
-		{
-			if (famT_drive)	msg(DBG_TE2,"sbpcd_open: !st_spinning.\n");
-			cc_SpinUp();
-			flags_cmd_out |= f_respo2;
-			cc_ReadStatus();
-			i=ResponseStatus();
-		}
-	if (famT_drive)	msg(DBG_TE2,"sbpcd_open: status %02X\n", D_S[d].status_bits);
-	if (!st_door_closed||!st_caddy_in)
-	{
-		msg(DBG_INF, "sbpcd_open: no disk in drive.\n");
-		D_S[d].open_count=0;
-#if JUKEBOX
-		if (!fam0_drive)
-		{
-			i=UnLockDoor();
-			cc_SpinDown(); /* eject tray */
-		}
-#endif
-		return (-ENXIO);
-	}
-	/*
-	 * try to keep an "open" counter here and lock the door if 0->1.
-	 */
-	MOD_INC_USE_COUNT;
-	msg(DBG_LCK,"open_count: %d -> %d\n",
-	    D_S[d].open_count,D_S[d].open_count+1);
-	if (++D_S[d].open_count<=1)
-	{
-		i=LockDoor();
-		D_S[d].open_count=1;
-		if (famT_drive)	msg(DBG_TE2,"sbpcd_open: before i=DiskInfo();.\n");
-		i=DiskInfo();
-		if (famT_drive)	msg(DBG_TE2,"sbpcd_open: after i=DiskInfo();.\n");
-		if ((D_S[d].ored_ctl_adr&0x40)==0)
-			msg(DBG_INF,"CD contains no data tracks.\n");
-	}
-	if (!st_spinning) cc_SpinUp();
-	return (0);
-}
-/*==========================================================================*/
-/*
- *  On close, we flush all sbp blocks from the buffer cache.
- */
-static void sbpcd_release(struct inode * ip, struct file * file)
-{
-	int i;
-	
-	i = MINOR(ip->i_rdev);
-	if ((i<0) || (i>=NR_SBPCD) || (D_S[i].drv_id==-1))
-	{
-		msg(DBG_INF, "release: bad device: %04X\n", ip->i_rdev);
-		return;
-	}
-	switch_drive(i);
-	
-	D_S[d].sbp_first_frame=D_S[d].sbp_last_frame=-1;
-	sync_dev(ip->i_rdev);                   /* nonsense if read only device? */
-	invalidate_buffers(ip->i_rdev);
-	
-	/*
-	 * try to keep an "open" counter here and unlock the door if 1->0.
-	 */
-	MOD_DEC_USE_COUNT;
-	msg(DBG_LCK,"open_count: %d -> %d\n",
-	    D_S[d].open_count,D_S[d].open_count-1);
-	if (D_S[d].open_count>-2) /* CDROMEJECT may have been done */
-	{
-		if (--D_S[d].open_count<=0) 
-		{
-			i=UnLockDoor();
-			if (D_S[d].audio_state!=audio_playing)
-				if (D_S[d].f_eject) cc_SpinDown();
-			D_S[d].diskstate_flags &= ~cd_size_bit;
-			D_S[d].open_count=0; 
-		}
-	}
-}
-/*==========================================================================*/
-/*
- *
- */
-static struct file_operations sbpcd_fops =
-{
-	NULL,                   /* lseek - default */
-	block_read,             /* read - general block-dev read */
-	block_write,            /* write - general block-dev write */
-	NULL,                   /* readdir - bad */
-	NULL,                   /* select */
-	sbpcd_ioctl,            /* ioctl */
-	NULL,                   /* mmap */
-	sbpcd_open,             /* open */
-	sbpcd_release,          /* release */
-	NULL,                   /* fsync */
-	NULL,                   /* fasync */
-	sbpcd_chk_disk_change,  /* media_change */
-	NULL                    /* revalidate */
-};
-/*==========================================================================*/
-/*
- * accept "kernel command line" parameters 
- * (suggested by Peter MacDonald with SLS 1.03)
- *
- * This is only implemented for the first controller. Should be enough to
- * allow installing with a "strange" distribution kernel.
- *
- * use: tell LILO:
- *                 sbpcd=0x230,SoundBlaster
- *             or
- *                 sbpcd=0x300,LaserMate
- *             or
- *                 sbpcd=0x330,SoundScape
- *
- * (upper/lower case sensitive here - but all-lowercase is ok!!!).
- *
- * the address value has to be the CDROM PORT ADDRESS -
- * not the soundcard base address.
- * For the SPEA/SoundScape setup, DO NOT specify the "configuration port"
- * address, but the address which is really used for the CDROM (usually 8
- * bytes above).
- *
- */
-#if (SBPCD_ISSUE-1)
-static
-#endif
-void sbpcd_setup(const char *s, int *p)
-{
-	setup_done++;
-	msg(DBG_INI,"sbpcd_setup called with %04X,%s\n",p[1], s);
-	sbpro_type=0; /* default: "LaserMate" */
-	if (p[0]>1) sbpro_type=p[2];
-	if (!strcmp(s,str_sb)) sbpro_type=1;
-	else if (!strcmp(s,str_sb_l)) sbpro_type=1;
-	else if (!strcmp(s,str_sp)) sbpro_type=2;
-	else if (!strcmp(s,str_sp_l)) sbpro_type=2;
-	else if (!strcmp(s,str_ss)) sbpro_type=2;
-	else if (!strcmp(s,str_ss_l)) sbpro_type=2;
-	if (p[0]>0) sbpcd_ioaddr=p[1];
-	
-	CDo_command=sbpcd_ioaddr;
-	CDi_info=sbpcd_ioaddr;
-	CDi_status=sbpcd_ioaddr+1;
-	CDo_sel_i_d=sbpcd_ioaddr+1;
-	CDo_reset=sbpcd_ioaddr+2;
-	CDo_enable=sbpcd_ioaddr+3; 
-	if (sbpro_type==1)
-	{
-		MIXER_addr=sbpcd_ioaddr-0x10+0x04;
-		MIXER_data=sbpcd_ioaddr-0x10+0x05;
-		CDi_data=sbpcd_ioaddr;
-	}
-	else CDi_data=sbpcd_ioaddr+2;
-}
-/*==========================================================================*/
-/*
- * Sequoia S-1000 CD-ROM Interface Configuration
- * as used within SPEA Media FX, Ensonic SoundScape and some Reveal cards
- * The soundcard has to get jumpered for the interface type "Panasonic"
- * (not Sony or Mitsumi) and to get soft-configured for
- *     -> configuration port address
- *     -> CDROM port offset (num_ports): has to be 8 here. Possibly this
- *        offset value determines the interface type (none, Panasonic,
- *        Mitsumi, Sony).
- *        The interface uses a configuration port (0x320, 0x330, 0x340, 0x350)
- *        some bytes below the real CDROM address.
- *         
- *        For the Panasonic style (LaserMate) interface and the configuration
- *        port 0x330, we have to use an offset of 8; so, the real CDROM port
- *        address is 0x338.
- */
-static int config_spea(void)
-{
-	int n_ports=0x10; /* 2:0x00, 8:0x10, 16:0x20, 32:0x30 */
-	/* base address offset between configuration port and CDROM port */
-	int irq_number=0; /* off:0x00, 2:0x01, 7:0x03, 12:0x05, 15:0x07 */
-	int dma_channel=0; /* off: 0x00, 0:0x08, 1:0x18, 3:0x38, 5:0x58, 6:0x68 */
-	int dack_polarity=0; /* L:0x00, H:0x80 */
-	int drq_polarity=0x40; /* L:0x00, H:0x40 */
-	int i;
-
-#define SPEA_REG_1 sbpcd_ioaddr-0x08+4
-#define SPEA_REG_2 sbpcd_ioaddr-0x08+5
-	
-	OUT(SPEA_REG_1,0xFF);
-	i=inb(SPEA_REG_1);
-	if (i!=0x0F)
-	{
-		msg(DBG_SEQ,"no SPEA interface at %04X present.\n", sbpcd_ioaddr);
-		return (-1); /* no interface found */
-	}
-	OUT(SPEA_REG_1,0x04);
-	OUT(SPEA_REG_2,0xC0);
-	
-	OUT(SPEA_REG_1,0x05);
-	OUT(SPEA_REG_2,0x10|drq_polarity|dack_polarity);
-	
-#if 1
-#define SPEA_PATTERN 0x80
-#else
-#define SPEA_PATTERN 0x00
-#endif
-	OUT(SPEA_REG_1,0x06);
-	OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
-	OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
-	
-	OUT(SPEA_REG_1,0x09);
-	i=(inb(SPEA_REG_2)&0xCF)|n_ports;
-	OUT(SPEA_REG_2,i);
-	
-	sbpro_type = 0; /* acts like a LaserMate interface now */
-	msg(DBG_SEQ,"found SoundScape interface at %04X.\n", sbpcd_ioaddr);
-	return (0);
-}
-/*==========================================================================*/
-/*
- *  Test for presence of drive and initialize it.  Called at boot time.
- */
-#ifdef MODULE
-int init_module(void)
-#else
-int SBPCD_INIT(void)
-#endif MODULE
-{
-	int i=0, j=0;
-	int addr[2]={1, CDROM_PORT};
-	int port_index;
-	
-	sti();
-	
-	msg(DBG_INF,"sbpcd.c %s\n", VERSION);
-#ifndef MODULE
-#if DISTRIBUTION
-	if (!setup_done)
-	{
-		msg(DBG_INF,"Looking for Matsushita/Panasonic, CreativeLabs, Longshine, TEAC CD-ROM drives\n");
-		msg(DBG_INF,"= = = = = = = = = = W A R N I N G = = = = = = = = = =\n");
-		msg(DBG_INF,"Auto-Probing can cause a hang (f.e. touching an NE2000 card).\n");
-		msg(DBG_INF,"If that happens, you have to reboot and use the\n");
-		msg(DBG_INF,"LILO (kernel) command line feature like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x230,SoundBlaster\n");
-		msg(DBG_INF,"or like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x300,LaserMate\n");
-		msg(DBG_INF,"or like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x338,SoundScape\n");
-		msg(DBG_INF,"with your REAL address.\n");
-		msg(DBG_INF,"= = = = = = = = = = END of WARNING = = = = = == = = =\n");
-	}
-#endif DISTRIBUTION
-	sbpcd[0]=sbpcd_ioaddr; /* possibly changed by kernel command line */
-	sbpcd[1]=sbpro_type; /* possibly changed by kernel command line */
-#endif MODULE
-	
-	for (port_index=0;port_index<NUM_PROBE;port_index+=2)
-	{
-		addr[1]=sbpcd[port_index];
-		if (addr[1]==0) break;
-		if (check_region(addr[1],4))
-		{
-			msg(DBG_INF,"check_region: %03X is not free.\n",addr[1]);
-			continue;
-		}
-		if (sbpcd[port_index+1]==2) type=str_sp;
-		else if (sbpcd[port_index+1]==1) type=str_sb;
-		else type=str_lm;
-		sbpcd_setup(type, addr);
-#if DISTRIBUTION
-		msg(DBG_INF,"Scanning 0x%X (%s)...\n", CDo_command, type);
-#endif DISTRIBUTION
-		if (sbpcd[port_index+1]==2)
-		{
-			i=config_spea();
-			if (i<0) continue;
-		}
-#ifdef PATH_CHECK
-		if (check_card(addr[1])) continue;
-#endif PATH_CHECK
-		i=check_drives();
-		msg(DBG_INI,"check_drives done.\n");
-		if (i>=0) break; /* drive found */
-	} /* end of cycling through the set of possible I/O port addresses */
-	
-	if (ndrives==0)
-	{
-		msg(DBG_INF, "No drive found.\n");
-#ifdef MODULE
-		return -EIO;
-#else
-		goto init_done;
-#endif MODULE
-	}
-	
-	if (port_index>0)
-		msg(DBG_INF, "You should configure sbpcd.h for your hardware.\n");
-	check_datarate();
-	msg(DBG_INI,"check_datarate done.\n");
-	
-#if 0
-	if (!famL_drive)
-	{
-		OUT(CDo_reset,0);
-		sbp_sleep(HZ);
-	}
-#endif 0
-
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		if (D_S[j].drv_id==-1) continue;
-		switch_drive(j);
-#if 1
-		if (!famL_drive) cc_DriveReset();
-#endif 0
-		if (!st_spinning) cc_SpinUp();
-		D_S[d].sbp_first_frame = -1;  /* First frame in buffer */
-		D_S[d].sbp_last_frame = -1;   /* Last frame in buffer  */
-		D_S[d].sbp_read_frames = 0;   /* Number of frames being read to buffer */
-		D_S[d].sbp_current = 0;       /* Frame being currently read */
-		D_S[d].CD_changed=1;
-		D_S[d].frame_size=CD_FRAMESIZE;
-#if EJECT
-		if (!fam0_drive) D_S[d].f_eject=1;
-		else D_S[d].f_eject=0;
-#else
-		D_S[d].f_eject=0;
-#endif
-		
-		cc_ReadStatus();
-		i=ResponseStatus();  /* returns orig. status or p_busy_new */
-		if (famT_drive) i=ResponseStatus();  /* returns orig. status or p_busy_new */
-		if (i<0)
-			if (i!=-402)
-				msg(DBG_INF,"init: ResponseStatus returns %d.\n",i);
-		else
-		{
-			if (st_check)
-			{
-				i=cc_ReadError();
-				msg(DBG_INI,"init: cc_ReadError returns %d\n",i);
-			}
-		}
-		msg(DBG_INI,"init: first GetStatus: %d\n",i);
-		msg(DBG_LCS,"init: first GetStatus: error_byte=%d\n",
-		    D_S[d].error_byte);
-		if (D_S[d].error_byte==aud_12)
-		{
-			timeout=jiffies+2*HZ;
-			do
-			{
-				i=GetStatus();
-				msg(DBG_INI,"init: second GetStatus: %02X\n",i);
-				msg(DBG_LCS,
-				    "init: second GetStatus: error_byte=%d\n",
-				    D_S[d].error_byte);
-				if (i<0) break;
-				if (!st_caddy_in) break;
-				}
-			while ((!st_diskok)||(timeout<jiffies));
-		}
-		i=SetSpeed();
-		if (i>=0) D_S[d].CD_changed=1;
-	}
-	
-	/*
-	 * Turn on the CD audio channels.
-	 * For "compatible" soundcards (with "SBPRO 0" or "SBPRO 2"), the addresses
-	 * are obtained from SOUND_BASE (see sbpcd.h).
-	 */
-	if ((sbpro_type==1) || (SOUND_BASE))
-	{
-		if (sbpro_type!=1)
-		{
-			MIXER_addr=SOUND_BASE+0x04; /* sound card's address register */
-			MIXER_data=SOUND_BASE+0x05; /* sound card's data register */
-		}
-		OUT(MIXER_addr,MIXER_CD_Volume); /* select SB Pro mixer register */
-		OUT(MIXER_data,0xCC); /* one nibble per channel, max. value: 0xFF */
-	}
-	
-	if (register_blkdev(MAJOR_NR, major_name, &sbpcd_fops) != 0)
-	{
-		msg(DBG_INF, "Can't get MAJOR %d for Matsushita CDROM\n", MAJOR_NR);
-#ifdef MODULE
-		return -EIO;
-#else
-		goto init_done;
-#endif MODULE
-	}
-	blk_dev[MAJOR_NR].request_fn = DEVICE_REQUEST;
-	read_ahead[MAJOR_NR] = SBP_BUFFER_FRAMES * (CD_FRAMESIZE / 512);
-	
-	request_region(CDo_command,4,major_name);
-	
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		if (D_S[j].drv_id==-1) continue;
-		switch_drive(j);
-		/*
-		 * allocate memory for the frame buffers
-		 */
-		D_S[j].aud_buf=NULL;
-		D_S[j].sbp_audsiz=0;
-		D_S[j].sbp_bufsiz=SBP_BUFFER_FRAMES;
-		if (D_S[j].drv_type&drv_fam1)
-			if (READ_AUDIO>0) D_S[j].sbp_audsiz=READ_AUDIO;
-		D_S[j].sbp_buf=(u_char *) vmalloc(D_S[j].sbp_bufsiz*CD_FRAMESIZE);
-		if (D_S[j].sbp_buf==NULL)
-		{
-			msg(DBG_INF,"data buffer (%d frames) not available.\n",D_S[j].sbp_bufsiz);
-			return -EIO;
-		}
-		msg(DBG_INF,"data buffer size: %d frames.\n",SBP_BUFFER_FRAMES);
-		if (D_S[j].sbp_audsiz>0)
-		{
-			D_S[j].aud_buf=(u_char *) vmalloc(D_S[j].sbp_audsiz*CD_FRAMESIZE_RAW);
-			if (D_S[j].aud_buf==NULL) msg(DBG_INF,"audio buffer (%d frames) not available.\n",D_S[j].sbp_audsiz);
-			else msg(DBG_INF,"audio buffer size: %d frames.\n",D_S[j].sbp_audsiz);
-		}
-		/*
-		 * set the block size
-		 */
-		sbpcd_blocksizes[j]=CD_FRAMESIZE;
-	}
-	blksize_size[MAJOR_NR]=sbpcd_blocksizes;
-	
-#ifdef MODULE
-	return (0);
-#else
- init_done:
-#if !(SBPCD_ISSUE-1)
-#ifdef CONFIG_SBPCD2
-	sbpcd2_init();
-#endif
-#ifdef CONFIG_SBPCD3
-	sbpcd3_init();
-#endif
-#ifdef CONFIG_SBPCD4
-	sbpcd4_init();
-#endif
-#endif
-	return 0;
-#endif MODULE
-}
-/*==========================================================================*/
-#ifdef MODULE
-void cleanup_module(void)
-{
-	int j;
-	
-	if (MOD_IN_USE)
-	{
-		msg(DBG_INF, "%s module in use - can't remove it.\n", major_name);
-		return;
-	}
-	if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
-	{
-		msg(DBG_INF, "What's that: can't unregister %s.\n", major_name);
-		return;
-	}
-	release_region(CDo_command,4);
-	
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		if (D_S[j].drv_id==-1) continue;
-		vfree(D_S[j].sbp_buf);
-		if (D_S[j].sbp_audsiz>0)
-			vfree(D_S[j].aud_buf);
-	}
-	msg(DBG_INF, "%s module released.\n", major_name);
-}
-#endif MODULE
-/*==========================================================================*/
-/*
- * Check if the media has changed in the CD-ROM drive.
- * used externally (isofs/inode.c, fs/buffer.c)
- * Currently disabled (has to get "synchronized").
- */
-static int sbpcd_chk_disk_change(kdev_t full_dev)
-{
-	int i, st;
-	
-	msg(DBG_CHK,"media_check (%d) called\n", MINOR(full_dev));
-	return (0); /* "busy" test necessary before we really can check */
-	
-	i=MINOR(full_dev);
-	if ( (i<0) || (i>=NR_SBPCD) || (D_S[i].drv_id==-1) )
-	{
-		msg(DBG_INF, "media_check: invalid device %04X.\n", full_dev);
-		return (-1);
-	}
-	
-	switch_drive(i);
-	
-	cc_ReadStatus();                         /* command: give 1-byte status */
-	st=ResponseStatus();
-	msg(DBG_CHK,"media_check: %02X\n",D_S[d].status_bits);
-	if (st<0)
-	{
-		msg(DBG_INF,"media_check: ResponseStatus error.\n");
-		return (1); /* status not obtainable */
-	}
-	if (D_S[d].CD_changed==0xFF) msg(DBG_CHK,"media_check: \"changed\" assumed.\n");
-	if (!st_spinning) msg(DBG_CHK,"media_check: motor off.\n");
-	if (!st_door_closed)
-	{
-		msg(DBG_CHK,"media_check: door open.\n");
-		D_S[d].CD_changed=0xFF;
-	}
-	if (!st_caddy_in)
-	{
-		msg(DBG_CHK,"media_check: no disk in drive.\n");
-		D_S[d].open_count=0;
-		D_S[d].CD_changed=0xFF;
-	}
-	if (!st_diskok) msg(DBG_CHK,"media_check: !st_diskok.\n");
-	
-#if 0000
-	if (D_S[d].CD_changed==0xFF)
-	{
-		D_S[d].CD_changed=1;
-		return (1); /* driver had a change detected before */
-	}
-#endif 0000 /* seems to give additional errors at the moment */
-	
-	if (!st_diskok) return (1); /* disk not o.k. */
-	if (!st_caddy_in) return (1); /* disk removed */
-	if (!st_door_closed) return (1); /* door open */
-	return (0);
-}
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file. 
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this