From: Martin Schwidefsky <schwidefsky@de.ibm.com>
zfcp host adapter log message cleanup part 2:
- Shorten log output.
- Increase log level for some messages.
- Always print leading zeroes for wwpn and fcp-lun.
---
25-akpm/drivers/s390/scsi/zfcp_fsf.c | 707 +++++++++++++---------------------
25-akpm/drivers/s390/scsi/zfcp_fsf.h | 23 -
25-akpm/drivers/s390/scsi/zfcp_qdio.c | 102 ++--
25-akpm/drivers/s390/scsi/zfcp_scsi.c | 94 +---
4 files changed, 365 insertions(+), 561 deletions(-)
diff -puN drivers/s390/scsi/zfcp_fsf.c~s390-9-12-zfcp-log-messages-part-2 drivers/s390/scsi/zfcp_fsf.c
--- 25/drivers/s390/scsi/zfcp_fsf.c~s390-9-12-zfcp-log-messages-part-2 2004-04-08 13:55:24.605283600 -0700
+++ 25-akpm/drivers/s390/scsi/zfcp_fsf.c 2004-04-08 13:55:24.626280408 -0700
@@ -255,8 +255,7 @@ zfcp_fsf_req_complete(struct zfcp_fsf_re
/* cleanup request if requested by initiator */
if (likely(cleanup)) {
- ZFCP_LOG_TRACE("removing FSF request 0x%lx\n",
- (unsigned long) fsf_req);
+ ZFCP_LOG_TRACE("removing FSF request %p\n", fsf_req);
/*
* lock must not be held here since it will be
* grabed by the called routine, too
@@ -264,8 +263,7 @@ zfcp_fsf_req_complete(struct zfcp_fsf_re
zfcp_fsf_req_cleanup(fsf_req);
} else {
/* notify initiator waiting for the requests completion */
- ZFCP_LOG_TRACE("waking initiator of FSF request 0x%lx\n",
- (unsigned long) fsf_req);
+ ZFCP_LOG_TRACE("waking initiator of FSF request %p\n",fsf_req);
/*
* FIXME: Race! We must not access fsf_req here as it might have been
* cleaned up already due to the set ZFCP_STATUS_FSFREQ_COMPLETED
@@ -302,7 +300,7 @@ zfcp_fsf_protstatus_eval(struct zfcp_fsf
int retval = 0;
struct zfcp_adapter *adapter = fsf_req->adapter;
- ZFCP_LOG_DEBUG("QTCB is at 0x%lx\n", (unsigned long) fsf_req->qtcb);
+ ZFCP_LOG_DEBUG("QTCB is at %p\n", fsf_req->qtcb);
if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) {
ZFCP_LOG_DEBUG("fsf_req 0x%lx has been dismissed\n",
@@ -357,18 +355,6 @@ zfcp_fsf_protstatus_eval(struct zfcp_fsf
case FSF_PROT_QTCB_VERSION_ERROR:
ZFCP_LOG_FLAGS(0, "FSF_PROT_QTCB_VERSION_ERROR\n");
- /* DEBUG */
- ZFCP_LOG_NORMAL("fsf_req=0x%lx, qtcb=0x%lx (0x%lx, 0x%lx)\n",
- (unsigned long) fsf_req,
- (unsigned long) fsf_req->qtcb,
- ((unsigned long) fsf_req) & 0xFFFFFF00,
- (unsigned
- long) ((struct zfcp_fsf_req
- *) (((unsigned long) fsf_req) &
- 0xFFFFFF00))->qtcb);
- ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
- (char *) (((unsigned long) fsf_req) & 0xFFFFFF00),
- sizeof (struct zfcp_fsf_req));
ZFCP_LOG_NORMAL("error: The adapter %s contains "
"microcode of version 0x%x, the device driver "
"only supports 0x%x. Aborting.\n",
@@ -417,17 +403,6 @@ zfcp_fsf_protstatus_eval(struct zfcp_fsf
"that used on adapter %s. "
"Stopping all operations on this adapter.\n",
zfcp_get_busid_by_adapter(adapter));
- ZFCP_LOG_NORMAL("fsf_req=0x%lx, qtcb=0x%lx (0x%lx, 0x%lx)\n",
- (unsigned long) fsf_req,
- (unsigned long) fsf_req->qtcb,
- ((unsigned long) fsf_req) & 0xFFFFFF00,
- (unsigned long) (
- (struct zfcp_fsf_req *) (
- ((unsigned long)
- fsf_req) & 0xFFFFFF00))->qtcb);
- ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
- (char *) (((unsigned long) fsf_req) & 0xFFFFFF00),
- sizeof (struct zfcp_fsf_req));
debug_text_exception(adapter->erp_dbf, 0, "prot_unsup_qtcb");
zfcp_erp_adapter_shutdown(adapter, 0);
zfcp_cmd_dbf_event_fsf("unsqtcbt", fsf_req,
@@ -450,7 +425,7 @@ zfcp_fsf_protstatus_eval(struct zfcp_fsf
case FSF_PROT_DUPLICATE_REQUEST_ID:
ZFCP_LOG_FLAGS(0, "FSF_PROT_DUPLICATE_REQUEST_IDS\n");
if (fsf_req->qtcb) {
- ZFCP_LOG_NORMAL("bug: The request identifier 0x%Lx "
+ ZFCP_LOG_NORMAL("bug: The request identifier 0x%Lx "
"to the adapter %s is ambiguous. "
"Stopping all operations on this "
"adapter.\n",
@@ -459,13 +434,13 @@ zfcp_fsf_protstatus_eval(struct zfcp_fsf
req_handle),
zfcp_get_busid_by_adapter(adapter));
} else {
- ZFCP_LOG_NORMAL("bug: The request identifier 0x%lx "
+ ZFCP_LOG_NORMAL("bug: The request identifier %p "
"to the adapter %s is ambiguous. "
"Stopping all operations on this "
"adapter. "
"(bug: got this for an unsolicited "
"status read request)\n",
- (unsigned long) fsf_req,
+ fsf_req,
zfcp_get_busid_by_adapter(adapter));
}
debug_text_exception(adapter->erp_dbf, 0, "prot_dup_id");
@@ -584,19 +559,6 @@ zfcp_fsf_protstatus_eval(struct zfcp_fsf
"(debug info 0x%x).\n",
zfcp_get_busid_by_adapter(adapter),
fsf_req->qtcb->prefix.prot_status);
- ZFCP_LOG_NORMAL("fsf_req=0x%lx, qtcb=0x%lx (0x%lx, 0x%lx)\n",
- (unsigned long) fsf_req,
- (unsigned long) fsf_req->qtcb,
- ((unsigned long) fsf_req) & 0xFFFFFF00,
- (unsigned
- long) ((struct zfcp_fsf_req
- *) (((unsigned long) fsf_req) &
- 0xFFFFFF00))->qtcb);
- ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
- (char *) (((unsigned long) fsf_req) & 0xFFFFFF00),
- sizeof (struct zfcp_fsf_req));
- ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, (char *) fsf_req->qtcb,
- sizeof(struct fsf_qtcb));
debug_text_event(adapter->erp_dbf, 0, "prot_inval:");
debug_exception(adapter->erp_dbf, 0,
&fsf_req->qtcb->prefix.prot_status,
@@ -779,9 +741,7 @@ zfcp_fsf_req_dispatch(struct zfcp_fsf_re
int retval = 0;
if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
- ZFCP_LOG_TRACE("fsf_req=0x%lx, QTCB=0x%lx\n",
- (unsigned long) fsf_req,
- (unsigned long) (fsf_req->qtcb));
+ ZFCP_LOG_TRACE("fsf_req=%p, QTCB=%p\n", fsf_req, fsf_req->qtcb);
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
(char *) fsf_req->qtcb, sizeof(struct fsf_qtcb));
}
@@ -852,10 +812,8 @@ zfcp_fsf_req_dispatch(struct zfcp_fsf_re
ZFCP_LOG_FLAGS(2, "FSF_QTCB_UNKNOWN\n");
fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
ZFCP_LOG_NORMAL("bug: Command issued by the device driver is "
- "not supported by the adapter %s "
- "(debug info 0x%lx 0x%x).\n",
- zfcp_get_busid_by_adapter(fsf_req->adapter),
- (unsigned long) fsf_req, fsf_req->fsf_command);
+ "not supported by the adapter %s\n",
+ zfcp_get_busid_by_adapter(fsf_req->adapter));
if (fsf_req->fsf_command != fsf_req->qtcb->header.fsf_command)
ZFCP_LOG_NORMAL
("bug: Command issued by the device driver differs "
@@ -898,9 +856,8 @@ zfcp_fsf_status_read(struct zfcp_adapter
adapter->pool.fsf_req_status_read,
&lock_flags, &fsf_req);
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create an "
- "unsolicited status buffer for "
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Could not create unsolicited status "
+ "buffer for adapter %s.\n",
zfcp_get_busid_by_adapter(adapter));
goto failed_req_create;
}
@@ -932,8 +889,7 @@ zfcp_fsf_status_read(struct zfcp_adapter
goto failed_req_send;
}
- ZFCP_LOG_TRACE("Status Read request initiated "
- "(adapter busid=%s)\n",
+ ZFCP_LOG_TRACE("Status Read request initiated (adapter%s)\n",
zfcp_get_busid_by_adapter(adapter));
debug_text_event(adapter->req_dbf, 1, "unso");
goto out;
@@ -967,9 +923,9 @@ zfcp_fsf_status_read_port_closed(struct
read_unlock_irqrestore(&zfcp_data.config_lock, flags);
if (!port || (port->d_id != (status_buffer->d_id & ZFCP_DID_MASK))) {
- ZFCP_LOG_NORMAL("bug: Re-open port indication received for the "
- "non-existing port with DID 0x%3.3x, on "
- "the adapter %s. Ignored.\n",
+ ZFCP_LOG_NORMAL("bug: Reopen port indication received for"
+ "nonexisting port with d_id 0x%08x on "
+ "adapter %s. Ignored.\n",
status_buffer->d_id & ZFCP_DID_MASK,
zfcp_get_busid_by_adapter(adapter));
goto out;
@@ -994,9 +950,9 @@ zfcp_fsf_status_read_port_closed(struct
debug_exception(adapter->erp_dbf, 0,
&status_buffer->status_subtype, sizeof (u32));
ZFCP_LOG_NORMAL("bug: Undefined status subtype received "
- "for a re-open indication on the port with "
- "DID 0x%3.3x, on the adapter "
- "%s. Ignored. (debug info 0x%x)\n",
+ "for a reopen indication on port with "
+ "d_id 0x%08x on the adapter %s. "
+ "Ignored. (debug info 0x%x)\n",
status_buffer->d_id,
zfcp_get_busid_by_adapter(adapter),
status_buffer->status_subtype);
@@ -1064,9 +1020,8 @@ zfcp_fsf_status_read_handler(struct zfcp
case FSF_STATUS_READ_LINK_UP:
ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_LINK_UP\n");
debug_text_event(adapter->erp_dbf, 2, "unsol_link_up:");
- ZFCP_LOG_INFO("The local link to the adapter %s "
- "was re-plugged. "
- "Re-starting operations on this adapter..\n",
+ ZFCP_LOG_INFO("Local link to adapter %s was replugged. "
+ "Restarting operations on this adapter\n",
zfcp_get_busid_by_adapter(adapter));
/* All ports should be marked as ready to run again */
zfcp_erp_modify_adapter_status(adapter,
@@ -1081,9 +1036,8 @@ zfcp_fsf_status_read_handler(struct zfcp
case FSF_STATUS_READ_CFDC_UPDATED:
ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_CFDC_UPDATED\n");
debug_text_event(adapter->erp_dbf, 2, "unsol_cfdc_update:");
- ZFCP_LOG_NORMAL(
- "CFDC has been updated on the adapter %s\n",
- zfcp_get_busid_by_adapter(adapter));
+ ZFCP_LOG_INFO("CFDC has been updated on the adapter %s\n",
+ zfcp_get_busid_by_adapter(adapter));
break;
case FSF_STATUS_READ_CFDC_HARDENED:
@@ -1091,21 +1045,17 @@ zfcp_fsf_status_read_handler(struct zfcp
debug_text_event(adapter->erp_dbf, 2, "unsol_cfdc_harden:");
switch (status_buffer->status_subtype) {
case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE:
- ZFCP_LOG_NORMAL(
- "CFDC of the adapter %s "
- "has been saved on the SE\n",
- zfcp_get_busid_by_adapter(adapter));
+ ZFCP_LOG_INFO("CFDC of adapter %s saved on SE\n",
+ zfcp_get_busid_by_adapter(adapter));
break;
case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE2:
- ZFCP_LOG_NORMAL(
- "CFDC of the adapter %s "
- "has been copied to the secondary SE\n",
+ ZFCP_LOG_INFO("CFDC of adapter %s has been copied "
+ "to the secondary SE\n",
zfcp_get_busid_by_adapter(adapter));
break;
default:
- ZFCP_LOG_NORMAL(
- "CFDC of the adapter %s has been hardened\n",
- zfcp_get_busid_by_adapter(adapter));
+ ZFCP_LOG_INFO("CFDC of adapter %s has been hardened\n",
+ zfcp_get_busid_by_adapter(adapter));
}
break;
@@ -1114,11 +1064,10 @@ zfcp_fsf_status_read_handler(struct zfcp
debug_exception(adapter->erp_dbf, 0,
&status_buffer->status_type, sizeof (u32));
ZFCP_LOG_NORMAL("bug: An unsolicited status packet of unknown "
- "type was received by the zfcp-driver "
- "(debug info 0x%x)\n",
+ "type was received (debug info 0x%x)\n",
status_buffer->status_type);
- ZFCP_LOG_DEBUG("Dump of status_read_buffer 0x%lx:\n",
- (unsigned long) status_buffer);
+ ZFCP_LOG_DEBUG("Dump of status_read_buffer %p:\n",
+ status_buffer);
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
(char *) status_buffer,
sizeof (struct fsf_status_read_buffer));
@@ -1142,17 +1091,15 @@ zfcp_fsf_status_read_handler(struct zfcp
*/
retval = zfcp_fsf_status_read(adapter, 0);
if (retval < 0) {
- ZFCP_LOG_INFO("Outbound queue busy. "
- "Could not create use an "
- "unsolicited status read request for "
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("Failed to create unsolicited status read "
+ "request for the adapter %s.\n",
zfcp_get_busid_by_adapter(adapter));
/* temporary fix to avoid status read buffer shortage */
adapter->status_read_failed++;
if ((ZFCP_STATUS_READS_RECOM - adapter->status_read_failed)
< ZFCP_STATUS_READ_FAILED_THRESHOLD) {
- ZFCP_LOG_INFO("restart adapter due to status read "
- "buffer shortage (busid %s)\n",
+ ZFCP_LOG_INFO("restart adapter %s due to status read "
+ "buffer shortage\n",
zfcp_get_busid_by_adapter(adapter));
zfcp_erp_adapter_reopen(adapter, 0);
}
@@ -1188,11 +1135,9 @@ zfcp_fsf_abort_fcp_command(unsigned long
req_flags, adapter->pool.fsf_req_abort,
&lock_flags, &fsf_req);
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create an "
- "abort command request on the device with "
- "the FCP-LUN 0x%Lx connected to "
- "the port with WWPN 0x%Lx connected to "
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Failed to create an abort command "
+ "request for lun 0x%016Lx on port 0x%016Lx "
+ "on adapter %s.\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_adapter(adapter));
@@ -1218,9 +1163,8 @@ zfcp_fsf_abort_fcp_command(unsigned long
retval = zfcp_fsf_req_send(fsf_req, NULL);
if (retval) {
del_timer(&adapter->scsi_er_timer);
- ZFCP_LOG_INFO("error: Could not send an abort command request "
- "for a command on the adapter %s, "
- "port WWPN 0x%Lx and unit LUN 0x%Lx\n",
+ ZFCP_LOG_INFO("error: Failed to send abort command request "
+ "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n",
zfcp_get_busid_by_adapter(adapter),
unit->port->wwpn, unit->fcp_lun);
zfcp_fsf_req_free(fsf_req);
@@ -1229,10 +1173,10 @@ zfcp_fsf_abort_fcp_command(unsigned long
}
ZFCP_LOG_DEBUG("Abort FCP Command request initiated "
- "(adapter busid=%s, port d_id=0x%x, "
- "unit fcp_lun=0x%Lx, old_req_id=0x%lx)\n",
+ "(adapter%s, port d_id=0x%08x, "
+ "unit x%016Lx, old_req_id=0x%lx)\n",
zfcp_get_busid_by_adapter(adapter),
- (unsigned int) unit->port->d_id,
+ unit->port->d_id,
unit->fcp_lun, old_req_id);
out:
write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
@@ -1276,10 +1220,9 @@ zfcp_fsf_abort_fcp_command_handler(struc
*/
} else {
ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
- ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x "
- "for the port with WWPN 0x%Lx connected "
- "to the adapter %s is not valid. This "
- "may happen occasionally.\n",
+ ZFCP_LOG_INFO("Temporary port identifier 0x%x for "
+ "port 0x%016Lx on adapter %s invalid. "
+ "This may happen occasionally.\n",
unit->port->handle,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
@@ -1310,11 +1253,9 @@ zfcp_fsf_abort_fcp_command_handler(struc
} else {
ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n");
ZFCP_LOG_INFO
- ("Warning: Temporary LUN identifier (handle) 0x%x "
- "of the logical unit with FCP-LUN 0x%Lx at "
- "the remote port with WWPN 0x%Lx connected "
- "to the adapter %s is "
- "not valid. This may happen in rare cases."
+ ("Warning: Temporary LUN identifier 0x%x of LUN "
+ "0x%016Lx on port 0x%016Lx on adapter %s is "
+ "invalid. This may happen in rare cases. "
"Trying to re-establish link.\n",
unit->handle,
unit->fcp_lun,
@@ -1348,10 +1289,9 @@ zfcp_fsf_abort_fcp_command_handler(struc
case FSF_PORT_BOXED:
/* 2 */
ZFCP_LOG_FLAGS(0, "FSF_PORT_BOXED\n");
- ZFCP_LOG_DEBUG("The remote port "
- "with WWPN 0x%Lx on the adapter %s "
- "needs to be reopened\n",
- unit->port->wwpn, zfcp_get_busid_by_unit(unit));
+ ZFCP_LOG_INFO("Remote port 0x%016Lx on adapter %s needs to "
+ "be reopened\n", unit->port->wwpn,
+ zfcp_get_busid_by_unit(unit));
debug_text_event(new_fsf_req->adapter->erp_dbf, 2,
"fsf_s_pboxed");
zfcp_erp_port_reopen(unit->port, 0);
@@ -1465,8 +1405,8 @@ zfcp_fsf_send_ct(struct zfcp_send_ct *ct
ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
pool, &lock_flags, &fsf_req);
if (ret < 0) {
- ZFCP_LOG_INFO("error: out of memory. Could not create CT "
- "request (FC-GS). (adapter: %s)\n",
+ ZFCP_LOG_INFO("error: Could not create CT request (FC-GS) for "
+ "adapter: %s\n",
zfcp_get_busid_by_adapter(adapter));
goto failed_req;
}
@@ -1495,9 +1435,8 @@ zfcp_fsf_send_ct(struct zfcp_send_ct *ct
ct->req, ct->req_count,
ZFCP_MAX_SBALS_PER_CT_REQ);
if (bytes <= 0) {
- ZFCP_LOG_INFO("error: out of resources (outbuf). "
- "Could not create CT request (FC-GS). "
- "(adapter: %s)\n",
+ ZFCP_LOG_INFO("error: creation of CT request failed "
+ "on adapter %s\n",
zfcp_get_busid_by_adapter(adapter));
if (bytes == 0)
ret = -ENOMEM;
@@ -1513,9 +1452,8 @@ zfcp_fsf_send_ct(struct zfcp_send_ct *ct
ct->resp, ct->resp_count,
ZFCP_MAX_SBALS_PER_CT_REQ);
if (bytes <= 0) {
- ZFCP_LOG_INFO("error: out of resources (inbuf). "
- "Could not create a CT request (FC-GS). "
- "(adapter: %s)\n",
+ ZFCP_LOG_INFO("error: creation of CT request failed "
+ "on adapter %s\n",
zfcp_get_busid_by_adapter(adapter));
if (bytes == 0)
ret = -ENOMEM;
@@ -1528,8 +1466,8 @@ zfcp_fsf_send_ct(struct zfcp_send_ct *ct
} else {
/* reject send generic request */
ZFCP_LOG_INFO(
- "error: microcode does not support chained SBALs."
- "CT request (FC-GS) too big. (adapter: %s)\n",
+ "error: microcode does not support chained SBALs,"
+ "CT request too big (adapter %s)\n",
zfcp_get_busid_by_adapter(adapter));
ret = -EOPNOTSUPP;
goto failed_send;
@@ -1544,14 +1482,13 @@ zfcp_fsf_send_ct(struct zfcp_send_ct *ct
/* start QDIO request for this FSF request */
ret = zfcp_fsf_req_send(fsf_req, ct->timer);
if (ret) {
- ZFCP_LOG_DEBUG("error: out of resources. Could not send CT "
- "request (FC-GS). (adapter: %s, "
- "port WWPN 0x%Lx)\n",
+ ZFCP_LOG_DEBUG("error: initiation of CT request failed "
+ "(adapter %s, port 0x%016Lx)\n",
zfcp_get_busid_by_adapter(adapter), port->wwpn);
goto failed_send;
}
- ZFCP_LOG_DEBUG("CT request initiated. (adapter: %s, port WWPN 0x%Lx)\n",
+ ZFCP_LOG_DEBUG("CT request initiated (adapter %s, port 0x%016Lx)\n",
zfcp_get_busid_by_adapter(adapter), port->wwpn);
goto out;
@@ -1609,15 +1546,15 @@ zfcp_fsf_send_ct_handler(struct zfcp_fsf
case FSF_SERVICE_CLASS_NOT_SUPPORTED :
ZFCP_LOG_FLAGS(2, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n");
if (adapter->fc_service_class <= 3) {
- ZFCP_LOG_INFO("error: The adapter %s does "
- "not support fibre-channel class %d.\n",
- zfcp_get_busid_by_port(port),
+ ZFCP_LOG_INFO("error: adapter %s does not support fc "
+ "class %d.\n",
+ zfcp_get_busid_by_port(port),
adapter->fc_service_class);
} else {
ZFCP_LOG_INFO("bug: The fibre channel class at the "
"adapter %s is invalid. "
"(debug info %d)\n",
- zfcp_get_busid_by_port(port),
+ zfcp_get_busid_by_port(port),
adapter->fc_service_class);
}
/* stop operation for this adapter */
@@ -1653,8 +1590,7 @@ zfcp_fsf_send_ct_handler(struct zfcp_fsf
case FSF_ACCESS_DENIED:
ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
ZFCP_LOG_NORMAL("Access denied, cannot send generic command "
- "to a port with WWPN 0x%Lx connected "
- "to the adapter %s\n", port->wwpn,
+ "to port 0x%016Lx on adapter %s\n", port->wwpn,
zfcp_get_busid_by_port(port));
for (counter = 0; counter < 2; counter++) {
subtable = header->fsf_status_qual.halfword[counter * 2];
@@ -1675,8 +1611,7 @@ zfcp_fsf_send_ct_handler(struct zfcp_fsf
case FSF_GENERIC_COMMAND_REJECTED :
ZFCP_LOG_FLAGS(2, "FSF_GENERIC_COMMAND_REJECTED\n");
- ZFCP_LOG_INFO("warning: The port with WWPN 0x%Lx connected to "
- "the adapter %s has "
+ ZFCP_LOG_INFO("warning: The port 0x%016Lx on adapter %s has "
"rejected a generic services command.\n",
port->wwpn, zfcp_get_busid_by_port(port));
ZFCP_LOG_INFO("status qualifier:\n");
@@ -1689,11 +1624,9 @@ zfcp_fsf_send_ct_handler(struct zfcp_fsf
case FSF_PORT_HANDLE_NOT_VALID :
ZFCP_LOG_FLAGS(2, "FSF_PORT_HANDLE_NOT_VALID\n");
- ZFCP_LOG_DEBUG("Temporary port identifier (handle) 0x%x "
- "for the port with WWPN 0x%Lx connected to "
- "the adapter %s is "
- "not valid. This may happen occasionally.\n",
- port->handle,
+ ZFCP_LOG_DEBUG("Temporary port identifier 0x%x for port "
+ "0x%016Lx on adapter %s invalid. This may "
+ "happen occasionally.\n", port->handle,
port->wwpn, zfcp_get_busid_by_port(port));
ZFCP_LOG_INFO("status qualifier:\n");
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO,
@@ -1706,8 +1639,7 @@ zfcp_fsf_send_ct_handler(struct zfcp_fsf
case FSF_REQUEST_BUF_NOT_VALID :
ZFCP_LOG_FLAGS(2, "FSF_REQUEST_BUF_NOT_VALID\n");
- ZFCP_LOG_NORMAL("error: The port with WWPN 0x%Lx connected to "
- "the adapter %s has "
+ ZFCP_LOG_NORMAL("error: The port 0x%016Lx on adapter %s has "
"rejected a generic services command "
"due to invalid request buffer.\n",
port->wwpn, zfcp_get_busid_by_port(port));
@@ -1717,8 +1649,7 @@ zfcp_fsf_send_ct_handler(struct zfcp_fsf
case FSF_RESPONSE_BUF_NOT_VALID :
ZFCP_LOG_FLAGS(2, "FSF_RESPONSE_BUF_NOT_VALID\n");
- ZFCP_LOG_NORMAL("error: The port with WWPN 0x%Lx connected to "
- "the adapter %s has "
+ ZFCP_LOG_NORMAL("error: The port 0x%016Lx on adapter %s has "
"rejected a generic services command "
"due to invalid response buffer.\n",
port->wwpn, zfcp_get_busid_by_port(port));
@@ -1728,8 +1659,7 @@ zfcp_fsf_send_ct_handler(struct zfcp_fsf
case FSF_PORT_BOXED :
ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
- ZFCP_LOG_DEBUG("The remote port "
- "with WWPN 0x%Lx on the adapter %s "
+ ZFCP_LOG_INFO("The remote port 0x%016Lx on adapter %s "
"needs to be reopened\n",
port->wwpn, zfcp_get_busid_by_port(port));
debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed");
@@ -1778,8 +1708,8 @@ zfcp_fsf_send_els(struct zfcp_send_els *
ZFCP_WAIT_FOR_SBAL|ZFCP_REQ_AUTO_CLEANUP,
NULL, &lock_flags, &fsf_req);
if (ret < 0) {
- ZFCP_LOG_INFO("error: out of memory. Could not create ELS "
- "request. (adapter: %s, port did: 0x%06x)\n",
+ ZFCP_LOG_INFO("error: creation of ELS request failed "
+ "(adapter %s, port d_id: 0x%08x)\n",
zfcp_get_busid_by_adapter(adapter), port->d_id);
goto failed_req;
}
@@ -1803,9 +1733,8 @@ zfcp_fsf_send_els(struct zfcp_send_els *
els->req, els->req_count,
ZFCP_MAX_SBALS_PER_ELS_REQ);
if (bytes <= 0) {
- ZFCP_LOG_INFO("error: out of resources (outbuf). "
- "Could not create ELS request. "
- "(adapter: %s, port did: 0x%06x)\n",
+ ZFCP_LOG_INFO("error: creation of ELS request failed "
+ "(adapter %s, port d_id: 0x%08x)\n",
zfcp_get_busid_by_adapter(adapter),
port->d_id);
if (bytes == 0) {
@@ -1822,9 +1751,8 @@ zfcp_fsf_send_els(struct zfcp_send_els *
els->resp, els->resp_count,
ZFCP_MAX_SBALS_PER_ELS_REQ);
if (bytes <= 0) {
- ZFCP_LOG_INFO("error: out of resources (inbuf). "
- "Could not create ELS request. "
- "(adapter: %s, port did: 0x%06x)\n",
+ ZFCP_LOG_INFO("error: creation of ELS request failed "
+ "(adapter %s, port d_id: 0x%08x)\n",
zfcp_get_busid_by_adapter(adapter),
port->d_id);
if (bytes == 0) {
@@ -1837,9 +1765,9 @@ zfcp_fsf_send_els(struct zfcp_send_els *
fsf_req->qtcb->bottom.support.resp_buf_length = bytes;
} else {
/* reject request */
- ZFCP_LOG_INFO("error: microcode does not support chained SBALs."
- "ELS request too big. "
- "(adapter: %s, port did: 0x%06x)\n",
+ ZFCP_LOG_INFO("error: microcode does not support chained SBALs"
+ ", ELS request too big (adapter %s, "
+ "port d_id: 0x%08x)\n",
zfcp_get_busid_by_adapter(adapter), port->d_id);
ret = -EOPNOTSUPP;
goto failed_send;
@@ -1856,13 +1784,13 @@ zfcp_fsf_send_els(struct zfcp_send_els *
/* start QDIO request for this FSF request */
ret = zfcp_fsf_req_send(fsf_req, NULL);
if (ret) {
- ZFCP_LOG_DEBUG("error: out of resources. Could not send ELS "
- "request. (adapter: %s, port WWPN 0x%Lx)\n",
+ ZFCP_LOG_DEBUG("error: initiation of ELS request failed "
+ "(adapter %s, port 0x%016Lx)\n",
zfcp_get_busid_by_adapter(adapter), port->wwpn);
goto failed_send;
}
- ZFCP_LOG_DEBUG("ELS request initiated (adapter: %s, port WWPN 0x%Lx)\n",
+ ZFCP_LOG_DEBUG("ELS request initiated (adapter %s, port 0x%016Lx)\n",
zfcp_get_busid_by_adapter(adapter), port->wwpn);
goto out;
@@ -1915,12 +1843,12 @@ static int zfcp_fsf_send_els_handler(str
case FSF_SERVICE_CLASS_NOT_SUPPORTED:
ZFCP_LOG_FLAGS(2, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n");
if (adapter->fc_service_class <= 3) {
- ZFCP_LOG_INFO("error: The adapter %s does "
- "not support fibre-channel class %d.\n",
+ ZFCP_LOG_INFO("error: adapter %s does "
+ "not support fibrechannel class %d.\n",
zfcp_get_busid_by_port(port),
adapter->fc_service_class);
} else {
- ZFCP_LOG_INFO("bug: The fibre channel class at the "
+ ZFCP_LOG_INFO("bug: The fibrechannel class at "
"adapter %s is invalid. "
"(debug info %d)\n",
zfcp_get_busid_by_port(port),
@@ -1964,9 +1892,8 @@ static int zfcp_fsf_send_els_handler(str
case FSF_ELS_COMMAND_REJECTED:
ZFCP_LOG_FLAGS(2, "FSF_ELS_COMMAND_REJECTED\n");
- ZFCP_LOG_INFO("The ELS command has been rejected because "
- "a command filter in the FCP channel prohibited "
- "sending of the ELS to the SAN "
+ ZFCP_LOG_INFO("ELS has been rejected because command filter "
+ "prohibited sending "
"(adapter: %s, wwpn=0x%016Lx)\n",
zfcp_get_busid_by_port(port), port->wwpn);
@@ -2084,9 +2011,8 @@ zfcp_fsf_exchange_config_data(struct zfc
erp_action->adapter->pool.fsf_req_erp,
&lock_flags, &(erp_action->fsf_req));
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create an "
- "exchange configuration data request for"
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Could not create exchange configuration "
+ "data request for adapter %s.\n",
zfcp_get_busid_by_adapter(erp_action->adapter));
goto out;
}
@@ -2098,14 +2024,13 @@ zfcp_fsf_exchange_config_data(struct zfc
erp_action->fsf_req->erp_action = erp_action;
erp_action->fsf_req->qtcb->bottom.config.feature_selection =
- FSF_FEATURE_CFDC |
- FSF_FEATURE_LOST_SAN_NOTIFICATION;
+ FSF_FEATURE_CFDC;
/* start QDIO request for this FSF request */
retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
if (retval) {
ZFCP_LOG_INFO
- ("error: Could not send an exchange configuration data "
+ ("error: Could not send exchange configuration data "
"command on the adapter %s\n",
zfcp_get_busid_by_adapter(erp_action->adapter));
zfcp_fsf_req_free(erp_action->fsf_req);
@@ -2113,8 +2038,8 @@ zfcp_fsf_exchange_config_data(struct zfc
goto out;
}
- ZFCP_LOG_DEBUG("Exchange Configuration Data request initiated "
- "(adapter busid=%s)\n",
+ ZFCP_LOG_DEBUG("exchange configuration data request initiated "
+ "(adapter %s)\n",
zfcp_get_busid_by_adapter(erp_action->adapter));
out:
@@ -2228,10 +2153,9 @@ zfcp_fsf_exchange_config_data_handler(st
switch (adapter->fc_topology) {
case FSF_TOPO_P2P:
ZFCP_LOG_FLAGS(1, "FSF_TOPO_P2P\n");
- ZFCP_LOG_NORMAL("error: Point-to-point fibre-channel "
- "configuration detected "
- "at the adapter %s, not "
- "supported, shutting down adapter\n",
+ ZFCP_LOG_NORMAL("error: Point-to-point fibrechannel "
+ "configuration detected at adapter %s "
+ "unsupported, shutting down adapter\n",
zfcp_get_busid_by_adapter(adapter));
debug_text_event(fsf_req->adapter->erp_dbf, 0,
"top-p-to-p");
@@ -2239,10 +2163,9 @@ zfcp_fsf_exchange_config_data_handler(st
return -EIO;
case FSF_TOPO_AL:
ZFCP_LOG_FLAGS(1, "FSF_TOPO_AL\n");
- ZFCP_LOG_NORMAL("error: Arbitrated loop fibre-channel "
- "topology detected "
- "at the adapter %s, not "
- "supported, shutting down adapter\n",
+ ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel "
+ "topology detected at adapter %s "
+ "unsupported, shutting down adapter\n",
zfcp_get_busid_by_adapter(adapter));
debug_text_event(fsf_req->adapter->erp_dbf, 0,
"top-al");
@@ -2250,13 +2173,12 @@ zfcp_fsf_exchange_config_data_handler(st
return -EIO;
case FSF_TOPO_FABRIC:
ZFCP_LOG_FLAGS(1, "FSF_TOPO_FABRIC\n");
- ZFCP_LOG_INFO("Switched fabric fibre-channel "
- "network detected "
- "at the adapter %s.\n",
+ ZFCP_LOG_INFO("Switched fabric fibrechannel "
+ "network detected at adapter %s.\n",
zfcp_get_busid_by_adapter(adapter));
break;
default:
- ZFCP_LOG_NORMAL("bug: The fibre-channel topology "
+ ZFCP_LOG_NORMAL("bug: The fibrechannel topology "
"reported by the exchange "
"configuration command for "
"the adapter %s is not "
@@ -2332,10 +2254,8 @@ zfcp_fsf_open_port(struct zfcp_erp_actio
erp_action->adapter->pool.fsf_req_erp,
&lock_flags, &(erp_action->fsf_req));
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create an "
- "open port request for "
- "the port with WWPN 0x%Lx connected to "
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Could not create open port request "
+ "for port 0x%016Lx on adapter %s.\n",
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
goto out;
@@ -2354,10 +2274,8 @@ zfcp_fsf_open_port(struct zfcp_erp_actio
/* start QDIO request for this FSF request */
retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
if (retval) {
- ZFCP_LOG_INFO("error: Could not send an "
- "open port request for "
- "the port with WWPN 0x%Lx connected to "
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Could not send open port request for "
+ "port 0x%016Lx on adapter %s.\n",
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
zfcp_fsf_req_free(erp_action->fsf_req);
@@ -2365,8 +2283,8 @@ zfcp_fsf_open_port(struct zfcp_erp_actio
goto out;
}
- ZFCP_LOG_DEBUG("Open Port request initiated "
- "(adapter busid=%s, port wwpn=0x%Lx)\n",
+ ZFCP_LOG_DEBUG("open port request initiated "
+ "(adapter %s, port 0x%016Lx)\n",
zfcp_get_busid_by_adapter(erp_action->adapter),
erp_action->port->wwpn);
out:
@@ -2404,8 +2322,7 @@ zfcp_fsf_open_port_handler(struct zfcp_f
case FSF_PORT_ALREADY_OPEN:
ZFCP_LOG_FLAGS(0, "FSF_PORT_ALREADY_OPEN\n");
- ZFCP_LOG_NORMAL("bug: The remote port with WWPN=0x%Lx "
- "connected to the adapter %s "
+ ZFCP_LOG_NORMAL("bug: remote port 0x%016Lx on adapter %s "
"is already open.\n",
port->wwpn, zfcp_get_busid_by_port(port));
debug_text_exception(fsf_req->adapter->erp_dbf, 0,
@@ -2418,8 +2335,8 @@ zfcp_fsf_open_port_handler(struct zfcp_f
case FSF_ACCESS_DENIED:
ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
- ZFCP_LOG_NORMAL("Access denied, cannot open port "
- "with WWPN 0x%Lx connected to the adapter %s\n",
+ ZFCP_LOG_NORMAL("Access denied, cannot open port 0x%016Lx "
+ "on adapter %s\n",
port->wwpn, zfcp_get_busid_by_port(port));
for (counter = 0; counter < 2; counter++) {
subtable = header->fsf_status_qual.halfword[counter * 2];
@@ -2442,8 +2359,7 @@ zfcp_fsf_open_port_handler(struct zfcp_f
case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
ZFCP_LOG_FLAGS(1, "FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED\n");
ZFCP_LOG_INFO("error: The FSF adapter is out of resources. "
- "The remote port with WWPN=0x%Lx "
- "connected to the adapter %s "
+ "The remote port 0x%016Lx on adapter %s "
"could not be opened. Disabling it.\n",
port->wwpn, zfcp_get_busid_by_port(port));
debug_text_event(fsf_req->adapter->erp_dbf, 1,
@@ -2471,9 +2387,9 @@ zfcp_fsf_open_port_handler(struct zfcp_f
break;
case FSF_SQ_NO_RETRY_POSSIBLE:
ZFCP_LOG_FLAGS(0, "FSF_SQ_NO_RETRY_POSSIBLE\n");
- ZFCP_LOG_NORMAL("The remote port with WWPN=0x%Lx "
- "connected to the adapter %s "
- "could not be opened. Disabling it.\n",
+ ZFCP_LOG_NORMAL("The remote port 0x%016Lx on "
+ "adapter %s could not be opened. "
+ "Disabling it.\n",
port->wwpn,
zfcp_get_busid_by_port(port));
debug_text_exception(fsf_req->adapter->erp_dbf, 0,
@@ -2499,11 +2415,9 @@ zfcp_fsf_open_port_handler(struct zfcp_f
ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
/* save port handle assigned by FSF */
port->handle = header->port_handle;
- ZFCP_LOG_INFO("The remote port (WWPN=0x%Lx) via adapter "
- "(busid=%s) was opened, it's "
- "port handle is 0x%x\n",
- port->wwpn,
- zfcp_get_busid_by_port(port),
+ ZFCP_LOG_INFO("The remote port 0x%016Lx via adapter %s "
+ "was opened, it's port handle is 0x%x\n",
+ port->wwpn, zfcp_get_busid_by_port(port),
port->handle);
/* mark port as open */
atomic_set_mask(ZFCP_STATUS_COMMON_OPEN |
@@ -2539,9 +2453,9 @@ zfcp_fsf_open_port_handler(struct zfcp_f
/* skip sanity check and assume wwpn is ok */
} else {
if (plogi->serv_param.wwpn != port->wwpn) {
- ZFCP_LOG_INFO("warning: D_ID of port "
- "with WWPN 0x%Lx changed "
- "during open\n", port->wwpn);
+ ZFCP_LOG_INFO("warning: d_id of port "
+ "0x%016Lx changed during "
+ "open\n", port->wwpn);
debug_text_event(
fsf_req->adapter->erp_dbf, 0,
"fsf_s_did_change:");
@@ -2591,9 +2505,8 @@ zfcp_fsf_close_port(struct zfcp_erp_acti
erp_action->adapter->pool.fsf_req_erp,
&lock_flags, &(erp_action->fsf_req));
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create a "
- "close port request for WWPN 0x%Lx connected to "
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Could not create a close port request "
+ "for port 0x%016Lx on adapter %s.\n",
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
goto out;
@@ -2613,9 +2526,8 @@ zfcp_fsf_close_port(struct zfcp_erp_acti
/* start QDIO request for this FSF request */
retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
if (retval) {
- ZFCP_LOG_INFO("error: Could not send a "
- "close port request for WWPN 0x%Lx connected to "
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Could not send a close port request for "
+ "port 0x%016Lx on adapter %s.\n",
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
zfcp_fsf_req_free(erp_action->fsf_req);
@@ -2623,8 +2535,8 @@ zfcp_fsf_close_port(struct zfcp_erp_acti
goto out;
}
- ZFCP_LOG_TRACE("Close Port request initiated "
- "(adapter busid=%s, port wwpn=0x%Lx)\n",
+ ZFCP_LOG_TRACE("close port request initiated "
+ "(adapter %s, port 0x%016Lx)\n",
zfcp_get_busid_by_adapter(erp_action->adapter),
erp_action->port->wwpn);
out:
@@ -2658,11 +2570,9 @@ zfcp_fsf_close_port_handler(struct zfcp_
case FSF_PORT_HANDLE_NOT_VALID:
ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
- ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x "
- "for the port with WWPN 0x%Lx connected to "
- "the adapter %s is "
- "not valid. This may happen occasionally.\n",
- port->handle,
+ ZFCP_LOG_INFO("Temporary port identifier 0x%x for port "
+ "0x%016Lx on adapter %s invalid. This may happen "
+ "occasionally.\n", port->handle,
port->wwpn, zfcp_get_busid_by_port(port));
ZFCP_LOG_DEBUG("status qualifier:\n");
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
@@ -2684,11 +2594,9 @@ zfcp_fsf_close_port_handler(struct zfcp_
case FSF_GOOD:
ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
- ZFCP_LOG_TRACE("remote port (WWPN=0x%Lx) via adapter "
- "(busid=%s) closed, port handle 0x%x\n",
- port->wwpn,
- zfcp_get_busid_by_port(port),
- port->handle);
+ ZFCP_LOG_TRACE("remote port 0x016%Lx on adapter %s closed, "
+ "port handle 0x%x\n", port->wwpn,
+ zfcp_get_busid_by_port(port), port->handle);
zfcp_erp_modify_port_status(port,
ZFCP_STATUS_COMMON_OPEN,
ZFCP_CLEAR);
@@ -2732,12 +2640,11 @@ zfcp_fsf_close_physical_port(struct zfcp
erp_action->adapter->pool.fsf_req_erp,
&lock_flags, &erp_action->fsf_req);
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create a "
- "close physical port request for "
- "the port with WWPN 0x%Lx connected to "
- "the adapter %s.\n",
- erp_action->port->wwpn,
- zfcp_get_busid_by_adapter(erp_action->adapter));
+ ZFCP_LOG_INFO("error: Could not create close physical port "
+ "request (adapter %s, port 0x%016Lx)\n",
+ zfcp_get_busid_by_adapter(erp_action->adapter),
+ erp_action->port->wwpn);
+
goto out;
}
@@ -2754,18 +2661,17 @@ zfcp_fsf_close_physical_port(struct zfcp
/* start QDIO request for this FSF request */
retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
if (retval) {
- ZFCP_LOG_INFO("error: Could not send an close physical port "
- "request for the port with WWPN 0x%Lx connected "
- "to the adapter %s.\n",
- erp_action->port->wwpn,
- zfcp_get_busid_by_adapter(erp_action->adapter));
+ ZFCP_LOG_INFO("error: Could not send close physical port "
+ "request (adapter %s, port 0x%016Lx)\n",
+ zfcp_get_busid_by_adapter(erp_action->adapter),
+ erp_action->port->wwpn);
zfcp_fsf_req_free(erp_action->fsf_req);
erp_action->fsf_req = NULL;
goto out;
}
- ZFCP_LOG_TRACE("Close Physical Port request initiated "
- "(adapter busid=%s, port wwpn=0x%Lx)\n",
+ ZFCP_LOG_TRACE("close physical port request initiated "
+ "(adapter %s, port 0x%016Lx)\n",
zfcp_get_busid_by_adapter(erp_action->adapter),
erp_action->port->wwpn);
out:
@@ -2803,13 +2709,12 @@ zfcp_fsf_close_physical_port_handler(str
case FSF_PORT_HANDLE_NOT_VALID:
ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
- ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x "
- "for the port with WWPN 0x%Lx connected to "
- "the adapter %s is not valid. This may happen "
- "occasionally.\n",
+ ZFCP_LOG_INFO("Temporary port identifier 0x%x invalid"
+ "(adapter %s, port 0x%016Lx). "
+ "This may happen occasionally.\n",
port->handle,
- port->wwpn,
- zfcp_get_busid_by_port(port));
+ zfcp_get_busid_by_port(port),
+ port->wwpn);
ZFCP_LOG_DEBUG("status qualifier:\n");
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
(char *) &header->fsf_status_qual,
@@ -2823,8 +2728,8 @@ zfcp_fsf_close_physical_port_handler(str
case FSF_ACCESS_DENIED:
ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
ZFCP_LOG_NORMAL("Access denied, cannot close "
- "physical port with WWPN 0x%Lx connected to "
- "the adapter %s\n", port->wwpn,
+ "physical port 0x%016Lx on "
+ "adapter %s\n", port->wwpn,
zfcp_get_busid_by_port(port));
for (counter = 0; counter < 2; counter++) {
subtable = header->fsf_status_qual.halfword[counter * 2];
@@ -2845,7 +2750,7 @@ zfcp_fsf_close_physical_port_handler(str
case FSF_PORT_BOXED:
ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
- ZFCP_LOG_DEBUG("The remote port with WWPN 0x%Lx on the adapter "
+ ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter "
"%s needs to be reopened but it was attempted "
"to close it physically.\n",
port->wwpn,
@@ -2890,9 +2795,8 @@ zfcp_fsf_close_physical_port_handler(str
case FSF_GOOD:
ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
- ZFCP_LOG_DEBUG("Remote port (WWPN=0x%Lx) via adapter "
- "(busid=%s) physically closed, "
- "port handle 0x%x\n",
+ ZFCP_LOG_DEBUG("Remote port 0x%016Lx via adapter %s "
+ "physically closed, port handle 0x%x\n",
port->wwpn,
zfcp_get_busid_by_port(port), port->handle);
/* can't use generic zfcp_erp_modify_port_status because
@@ -2945,10 +2849,8 @@ zfcp_fsf_open_unit(struct zfcp_erp_actio
erp_action->adapter->pool.fsf_req_erp,
&lock_flags, &(erp_action->fsf_req));
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create an "
- "open unit request for FCP-LUN 0x%Lx connected "
- "to the port with WWPN 0x%Lx connected to "
- "the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Could not create open unit request for "
+ "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n",
erp_action->unit->fcp_lun,
erp_action->unit->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
@@ -2967,15 +2869,13 @@ zfcp_fsf_open_unit(struct zfcp_erp_actio
atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->unit->status);
erp_action->fsf_req->data.open_unit.unit = erp_action->unit;
erp_action->fsf_req->erp_action = erp_action;
-// erp_action->fsf_req->qtcb->bottom.support.option =
-// FSF_OPEN_LUN_UNSOLICITED_SENSE_DATA;
/* start QDIO request for this FSF request */
retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
if (retval) {
ZFCP_LOG_INFO("error: Could not send an open unit request "
- "on the adapter %s, port WWPN 0x%Lx for "
- "unit LUN 0x%Lx\n",
+ "on the adapter %s, port 0x%016Lx for "
+ "unit 0x%016Lx\n",
zfcp_get_busid_by_adapter(erp_action->adapter),
erp_action->port->wwpn,
erp_action->unit->fcp_lun);
@@ -2984,8 +2884,8 @@ zfcp_fsf_open_unit(struct zfcp_erp_actio
goto out;
}
- ZFCP_LOG_TRACE("Open LUN request initiated (adapter busid=%s, "
- "port wwpn=0x%Lx, unit fcp_lun=0x%Lx)\n",
+ ZFCP_LOG_TRACE("Open LUN request initiated (adapter %s, "
+ "port 0x%016Lx, unit 0x%016Lx)\n",
zfcp_get_busid_by_adapter(erp_action->adapter),
erp_action->port->wwpn, erp_action->unit->fcp_lun);
out:
@@ -3026,10 +2926,9 @@ zfcp_fsf_open_unit_handler(struct zfcp_f
case FSF_PORT_HANDLE_NOT_VALID:
ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
- ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x "
- "for the port with WWPN 0x%Lx connected to "
- "the adapter %s is "
- "not valid. This may happen occasionally.\n",
+ ZFCP_LOG_INFO("Temporary port identifier 0x%x "
+ "for port 0x%016Lx on adapter %s invalid "
+ "This may happen occasionally\n",
unit->port->handle,
unit->port->wwpn, zfcp_get_busid_by_unit(unit));
ZFCP_LOG_DEBUG("status qualifier:\n");
@@ -3043,10 +2942,8 @@ zfcp_fsf_open_unit_handler(struct zfcp_f
case FSF_LUN_ALREADY_OPEN:
ZFCP_LOG_FLAGS(0, "FSF_LUN_ALREADY_OPEN\n");
- ZFCP_LOG_NORMAL("bug: Attempted to open the logical unit "
- "with FCP-LUN 0x%Lx at "
- "the remote port with WWPN 0x%Lx connected "
- "to the adapter %s twice.\n",
+ ZFCP_LOG_NORMAL("bug: Attempted to open unit 0x%016Lx on "
+ "remote port 0x%016Lx on adapter %s twice.\n",
unit->fcp_lun,
unit->port->wwpn, zfcp_get_busid_by_unit(unit));
debug_text_exception(adapter->erp_dbf, 0,
@@ -3056,11 +2953,10 @@ zfcp_fsf_open_unit_handler(struct zfcp_f
case FSF_ACCESS_DENIED:
ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
- ZFCP_LOG_NORMAL("Access denied, cannot open unit "
- "with FCP-LUN 0x%Lx at the remote port with "
- "WWPN 0x%Lx connected to the adapter %s\n",
- unit->fcp_lun, unit->port->wwpn,
- zfcp_get_busid_by_unit(unit));
+ ZFCP_LOG_NORMAL("Access denied, cannot open unit 0x%016Lx on "
+ "remote port 0x%016Lx on adapter %s\n",
+ unit->fcp_lun, unit->port->wwpn,
+ zfcp_get_busid_by_unit(unit));
for (counter = 0; counter < 2; counter++) {
subtable = header->fsf_status_qual.halfword[counter * 2];
rule = header->fsf_status_qual.halfword[counter * 2 + 1];
@@ -3081,8 +2977,7 @@ zfcp_fsf_open_unit_handler(struct zfcp_f
case FSF_PORT_BOXED:
ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
- ZFCP_LOG_DEBUG("The remote port "
- "with WWPN 0x%Lx on the adapter %s "
+ ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s "
"needs to be reopened\n",
unit->port->wwpn, zfcp_get_busid_by_unit(unit));
debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed");
@@ -3093,16 +2988,18 @@ zfcp_fsf_open_unit_handler(struct zfcp_f
case FSF_LUN_SHARING_VIOLATION :
ZFCP_LOG_FLAGS(2, "FSF_LUN_SHARING_VIOLATION\n");
- subtable = header->fsf_status_qual.halfword[4];
- rule = header->fsf_status_qual.halfword[5];
- if (rule == 0xFFFF) {
+ if (header->fsf_status_qual.word[0] != 0) {
ZFCP_LOG_NORMAL("FCP-LUN 0x%Lx at the remote port "
- "with WWPN 0x%Lx connected to the "
- "adapter %s is already in use\n",
+ "with WWPN 0x%Lx "
+ "connected to the adapter %s "
+ "is already in use in LPAR%d\n",
unit->fcp_lun,
unit->port->wwpn,
- zfcp_get_busid_by_unit(unit));
+ zfcp_get_busid_by_unit(unit),
+ header->fsf_status_qual.fsf_queue_designator.hla);
} else {
+ subtable = header->fsf_status_qual.halfword[4];
+ rule = header->fsf_status_qual.halfword[5];
switch (subtable) {
case FSF_SQ_CFDC_SUBTABLE_OS:
case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN:
@@ -3134,9 +3031,8 @@ zfcp_fsf_open_unit_handler(struct zfcp_f
ZFCP_LOG_FLAGS(1, "FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED\n");
ZFCP_LOG_INFO("error: The adapter ran out of resources. "
"There is no handle (temporary port identifier) "
- "available for the unit with FCP-LUN 0x%Lx "
- "at the remote port with WWPN 0x%Lx connected "
- "to the adapter %s\n",
+ "available for unit 0x%016Lx on port 0x%016Lx "
+ "on adapter %s\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
@@ -3193,18 +3089,14 @@ zfcp_fsf_open_unit_handler(struct zfcp_f
ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
/* save LUN handle assigned by FSF */
unit->handle = header->lun_handle;
- ZFCP_LOG_TRACE("unit (FCP_LUN=0x%Lx) of remote port "
- "(WWPN=0x%Lx) via adapter (busid=%s) opened, "
- "port handle 0x%x, access flag 0x%02x\n",
+ ZFCP_LOG_TRACE("unit 0x%016Lx on remote port 0x%016Lx on "
+ "adapter %s opened, port handle 0x%x\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit),
- unit->handle,
- bottom->lun_access);
+ unit->handle);
/* mark unit as open */
atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status);
- if (adapter->supported_features & FSF_FEATURE_CFDC)
- unit->lun_access = bottom->lun_access;
retval = 0;
break;
@@ -3250,10 +3142,8 @@ zfcp_fsf_close_unit(struct zfcp_erp_acti
erp_action->adapter->pool.fsf_req_erp,
&lock_flags, &(erp_action->fsf_req));
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create a "
- "close unit request for FCP-LUN 0x%Lx "
- "connected to the port with WWPN 0x%Lx connected "
- "to the adapter %s.\n",
+ ZFCP_LOG_INFO("error: Could not create close unit request for "
+ "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n",
erp_action->unit->fcp_lun,
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
@@ -3276,8 +3166,7 @@ zfcp_fsf_close_unit(struct zfcp_erp_acti
retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
if (retval) {
ZFCP_LOG_INFO("error: Could not send a close unit request for "
- "FCP-LUN 0x%Lx connected to the port with "
- "WWPN 0x%Lx connected to the adapter %s.\n",
+ "unit 0x%016Lx on port 0x%016Lx onadapter %s.\n",
erp_action->unit->fcp_lun,
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
@@ -3286,8 +3175,8 @@ zfcp_fsf_close_unit(struct zfcp_erp_acti
goto out;
}
- ZFCP_LOG_TRACE("Close LUN request initiated (adapter busid=%s, "
- "port wwpn=0x%Lx, unit fcp_lun=0x%Lx)\n",
+ ZFCP_LOG_TRACE("Close LUN request initiated (adapter %s, "
+ "port 0x%016Lx, unit 0x%016Lx)\n",
zfcp_get_busid_by_adapter(erp_action->adapter),
erp_action->port->wwpn, erp_action->unit->fcp_lun);
out:
@@ -3321,9 +3210,8 @@ zfcp_fsf_close_unit_handler(struct zfcp_
case FSF_PORT_HANDLE_NOT_VALID:
ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
- ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x "
- "for the port with WWPN 0x%Lx connected to "
- "the adapter %s is not valid. This may "
+ ZFCP_LOG_INFO("Temporary port identifier 0x%x for port "
+ "0x%016Lx on adapter %s invalid. This may "
"happen in rare circumstances\n",
unit->port->handle,
unit->port->wwpn,
@@ -3343,11 +3231,9 @@ zfcp_fsf_close_unit_handler(struct zfcp_
case FSF_LUN_HANDLE_NOT_VALID:
ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n");
- ZFCP_LOG_INFO("Temporary LUN identifier (handle) 0x%x "
- "of the logical unit with FCP-LUN 0x%Lx at "
- "the remote port with WWPN 0x%Lx connected "
- "to the adapter %s is "
- "not valid. This may happen occasionally.\n",
+ ZFCP_LOG_INFO("Temporary LUN identifier 0x%x of unit "
+ "0x%016Lx on port 0x%016Lx on adapter %s is "
+ "invalid. This may happen occasionally.\n",
unit->handle,
unit->fcp_lun,
unit->port->wwpn,
@@ -3367,8 +3253,7 @@ zfcp_fsf_close_unit_handler(struct zfcp_
case FSF_PORT_BOXED:
ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
- ZFCP_LOG_DEBUG("The remote port "
- "with WWPN 0x%Lx on the adapter %s "
+ ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s "
"needs to be reopened\n",
unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
@@ -3414,9 +3299,8 @@ zfcp_fsf_close_unit_handler(struct zfcp_
case FSF_GOOD:
ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
- ZFCP_LOG_TRACE("unit (FCP_LUN=0x%Lx) of remote port "
- "(WWPN=0x%Lx) via adapter (busid=%s) closed, "
- "port handle 0x%x \n",
+ ZFCP_LOG_TRACE("unit 0x%016Lx on port 0x%016Lx on adapter %s "
+ "closed, port handle 0x%x\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit),
@@ -3468,10 +3352,9 @@ zfcp_fsf_send_fcp_command_task(struct zf
adapter->pool.fsf_req_scsi,
&lock_flags, &fsf_req);
if (unlikely(retval < 0)) {
- ZFCP_LOG_DEBUG("error: Out of resources. Could not create an "
- "FCP command request for FCP-LUN 0x%Lx "
- "connected to the port with WWPN 0x%Lx "
- "connected to the adapter %s.\n",
+ ZFCP_LOG_DEBUG("error: Could not create FCP command request "
+ "for unit 0x%016Lx on port 0x%016Lx on "
+ "adapter %s\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_adapter(adapter));
@@ -3496,8 +3379,7 @@ zfcp_fsf_send_fcp_command_task(struct zf
fsf_req->data.send_fcp_command_task.start_jiffies = jiffies;
fsf_req->data.send_fcp_command_task.unit = unit;
- ZFCP_LOG_DEBUG("unit=0x%lx, unit_fcp_lun=0x%Lx\n",
- (unsigned long) unit, unit->fcp_lun);
+ ZFCP_LOG_DEBUG("unit=%p, fcp_lun=0x%016Lx\n", unit, unit->fcp_lun);
/* set handles of unit and its parent port in QTCB */
fsf_req->qtcb->header.lun_handle = unit->handle;
@@ -3592,9 +3474,9 @@ zfcp_fsf_send_fcp_command_task(struct zf
retval = -EIO;
} else {
ZFCP_LOG_NORMAL("error: No truncation implemented but "
- "required. Shutting down unit "
- "(busid=%s, WWPN=0x%16.16Lx, "
- "FCP_LUN=0x%16.16Lx)\n",
+ "required. Shutting down unit "
+ "(adapter %s, port 0x%016Lx, "
+ "unit 0x%016Lx)\n",
zfcp_get_busid_by_unit(unit),
unit->port->wwpn,
unit->fcp_lun);
@@ -3617,17 +3499,16 @@ zfcp_fsf_send_fcp_command_task(struct zf
*/
retval = zfcp_fsf_req_send(fsf_req, NULL);
if (unlikely(retval < 0)) {
- ZFCP_LOG_INFO("error: Could not send an FCP command request "
- "for a command on the adapter %s, "
- "port WWPN 0x%Lx and unit LUN 0x%Lx\n",
+ ZFCP_LOG_INFO("error: Could not send FCP command request "
+ "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n",
zfcp_get_busid_by_adapter(adapter),
unit->port->wwpn,
unit->fcp_lun);
goto send_failed;
}
- ZFCP_LOG_TRACE("Send FCP Command initiated (adapter busid=%s, "
- "port wwpn=0x%Lx, unit fcp_lun=0x%Lx)\n",
+ ZFCP_LOG_TRACE("Send FCP Command initiated (adapter %s, "
+ "port 0x%016Lx, unit 0x%016Lx)\n",
zfcp_get_busid_by_adapter(adapter),
unit->port->wwpn,
unit->fcp_lun);
@@ -3676,10 +3557,9 @@ zfcp_fsf_send_fcp_command_task_managemen
adapter->pool.fsf_req_scsi,
&lock_flags, &fsf_req);
if (retval < 0) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create an "
- "FCP command (task management) request for "
- "the adapter %s, port with "
- "WWPN 0x%Lx and FCP_LUN 0x%Lx.\n",
+ ZFCP_LOG_INFO("error: Could not create FCP command (task "
+ "management) request for adapter %s, port "
+ " 0x%016Lx, unit 0x%016Lx.\n",
zfcp_get_busid_by_adapter(adapter),
unit->port->wwpn, unit->fcp_lun);
goto out;
@@ -3722,8 +3602,8 @@ zfcp_fsf_send_fcp_command_task_managemen
if (retval) {
del_timer(&adapter->scsi_er_timer);
ZFCP_LOG_INFO("error: Could not send an FCP-command (task "
- "management) on the adapter %s, port WWPN "
- "0x%Lx for unit LUN 0x%Lx\n",
+ "management) on adapter %s, port 0x%016Lx for "
+ "unit LUN 0x%016Lx\n",
zfcp_get_busid_by_adapter(adapter),
unit->port->wwpn,
unit->fcp_lun);
@@ -3733,8 +3613,8 @@ zfcp_fsf_send_fcp_command_task_managemen
}
ZFCP_LOG_TRACE("Send FCP Command (task management function) initiated "
- "(adapter busid=%s, port wwpn=0x%Lx, "
- "unit fcp_lun=0x%Lx, tm_flags=0x%x)\n",
+ "(adapter %s, port 0x%016Lx, unit 0x%016Lx, "
+ "tm_flags=0x%x)\n",
zfcp_get_busid_by_adapter(adapter),
unit->port->wwpn,
unit->fcp_lun,
@@ -3776,9 +3656,8 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_PORT_HANDLE_NOT_VALID:
ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
- ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x "
- "for the port with WWPN 0x%Lx connected to "
- "the adapter %s is not valid.\n",
+ ZFCP_LOG_INFO("Temporary port identifier 0x%x for port "
+ "0x%016Lx on adapter %s invalid\n",
unit->port->handle,
unit->port->wwpn, zfcp_get_busid_by_unit(unit));
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
@@ -3792,11 +3671,9 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_LUN_HANDLE_NOT_VALID:
ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n");
- ZFCP_LOG_INFO("Temporary LUN identifier (handle) 0x%x "
- "of the logical unit with FCP-LUN 0x%Lx at "
- "the remote port with WWPN 0x%Lx connected "
- "to the adapter %s is "
- "not valid. This may happen occasionally.\n",
+ ZFCP_LOG_INFO("Temporary LUN identifier 0x%x for unit "
+ "0x%016Lx on port 0x%016Lx on adapter %s is "
+ "invalid. This may happen occasionally.\n",
unit->handle,
unit->fcp_lun,
unit->port->wwpn,
@@ -3813,16 +3690,13 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_HANDLE_MISMATCH:
ZFCP_LOG_FLAGS(0, "FSF_HANDLE_MISMATCH\n");
- ZFCP_LOG_NORMAL("bug: The port handle (temporary port "
- "identifier) 0x%x has changed unexpectedly. "
- "This was detected upon receiveing the "
- "response of a command send to the unit with "
- "FCP-LUN 0x%Lx at the remote port with WWPN "
- "0x%Lx connected to the adapter %s.\n",
+ ZFCP_LOG_NORMAL("bug: The port handle 0x%x has changed "
+ "unexpectedly. (adapter %s, port 0x%016Lx, "
+ "unit 0x%016Lx)\n",
unit->port->handle,
- unit->fcp_lun,
+ zfcp_get_busid_by_unit(unit),
unit->port->wwpn,
- zfcp_get_busid_by_unit(unit));
+ unit->fcp_lun);
ZFCP_LOG_NORMAL("status qualifier:\n");
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
(char *) &header->fsf_status_qual,
@@ -3841,11 +3715,11 @@ zfcp_fsf_send_fcp_command_handler(struct
ZFCP_LOG_FLAGS(0, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n");
if (fsf_req->adapter->fc_service_class <= 3) {
ZFCP_LOG_NORMAL("error: The adapter %s does "
- "not support fibre-channel class %d.\n",
+ "not support fibrechannel class %d.\n",
zfcp_get_busid_by_unit(unit),
fsf_req->adapter->fc_service_class);
} else {
- ZFCP_LOG_NORMAL("bug: The fibre channel class at the "
+ ZFCP_LOG_NORMAL("bug: The fibrechannel class at "
"adapter %s is invalid. "
"(debug info %d)\n",
zfcp_get_busid_by_unit(unit),
@@ -3864,10 +3738,9 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_FCPLUN_NOT_VALID:
ZFCP_LOG_FLAGS(0, "FSF_FCPLUN_NOT_VALID\n");
- ZFCP_LOG_NORMAL("bug: The FCP LUN 0x%Lx behind the remote port "
- "of WWPN0x%Lx via the adapter %s does not have "
- "the correct unit handle (temporary unit "
- "identifier) 0x%x\n",
+ ZFCP_LOG_NORMAL("bug: unit 0x%016Lx on port 0x%016Lx on "
+ "adapter %s does not have correct unit "
+ "handle 0x%x\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit),
@@ -3888,11 +3761,10 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_ACCESS_DENIED:
ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
- ZFCP_LOG_NORMAL("Access denied, cannot send FCP "
- "command to the unit with FCP-LUN 0x%Lx at the "
- "remote port with WWPN 0x%Lx connected to the "
+ ZFCP_LOG_NORMAL("Access denied, cannot send FCP command to "
+ "unit 0x%016Lx on port 0x%016Lx on "
"adapter %s\n", unit->fcp_lun, unit->port->wwpn,
- zfcp_get_busid_by_unit(unit));
+ zfcp_get_busid_by_unit(unit));
for (counter = 0; counter < 2; counter++) {
subtable = header->fsf_status_qual.halfword[counter * 2];
rule = header->fsf_status_qual.halfword[counter * 2 + 1];
@@ -3912,9 +3784,8 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_DIRECTION_INDICATOR_NOT_VALID:
ZFCP_LOG_FLAGS(0, "FSF_DIRECTION_INDICATOR_NOT_VALID\n");
- ZFCP_LOG_INFO("bug: Invalid data direction given for the unit "
- "with FCP LUN 0x%Lx at the remote port with "
- "WWPN 0x%Lx via the adapter %s "
+ ZFCP_LOG_INFO("bug: Invalid data direction given for unit "
+ "0x%016Lx on port 0x%016Lx on adapter %s "
"(debug info %d)\n",
unit->fcp_lun,
unit->port->wwpn,
@@ -3935,9 +3806,8 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_INBOUND_DATA_LENGTH_NOT_VALID:
ZFCP_LOG_FLAGS(0, "FSF_INBOUND_DATA_LENGTH_NOT_VALID\n");
ZFCP_LOG_NORMAL("bug: An invalid inbound data length field "
- "was found in a command for the unit with "
- "FCP LUN 0x%Lx of the remote port "
- "with WWPN 0x%Lx via the adapter %s.\n",
+ "was found in a command for unit 0x%016Lx "
+ "on port 0x%016Lx on adapter %s.\n",
unit->fcp_lun,
unit->port->wwpn, zfcp_get_busid_by_unit(unit));
/* stop operation for this adapter */
@@ -3955,9 +3825,8 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_OUTBOUND_DATA_LENGTH_NOT_VALID:
ZFCP_LOG_FLAGS(0, "FSF_OUTBOUND_DATA_LENGTH_NOT_VALID\n");
ZFCP_LOG_NORMAL("bug: An invalid outbound data length field "
- "was found in a command for the unit with "
- "FCP LUN 0x%Lx of the remote port "
- "with WWPN 0x%Lx via the adapter %s\n.",
+ "was found in a command unit 0x%016Lx on port "
+ "0x%016Lx on adapter %s\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
@@ -3975,9 +3844,8 @@ zfcp_fsf_send_fcp_command_handler(struct
ZFCP_LOG_FLAGS(0, "FSF_CMND_LENGTH_NOT_VALID\n");
ZFCP_LOG_NORMAL
("bug: An invalid control-data-block length field "
- "was found in a command for the unit with "
- "FCP LUN 0x%Lx of the remote port "
- "with WWPN 0x%Lx via the adapter %s " "(debug info %d)\n",
+ "was found in a command for unit 0x%016Lx on port "
+ "0x%016Lx on adapter %s " "(debug info %d)\n",
unit->fcp_lun, unit->port->wwpn,
zfcp_get_busid_by_unit(unit),
fsf_req->qtcb->bottom.io.fcp_cmnd_length);
@@ -3994,8 +3862,7 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_PORT_BOXED:
ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
- ZFCP_LOG_DEBUG("The remote port "
- "with WWPN 0x%Lx on the adapter %s "
+ ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s "
"needs to be reopened\n",
unit->port->wwpn, zfcp_get_busid_by_unit(unit));
debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed");
@@ -4010,9 +3877,8 @@ zfcp_fsf_send_fcp_command_handler(struct
case FSF_LUN_BOXED:
ZFCP_LOG_FLAGS(0, "FSF_LUN_BOXED\n");
ZFCP_LOG_NORMAL(
- "The remote unit with FCP-LUN 0x%Lx "
- "at the remote port with WWPN 0x%Lx "
- "connected to the adapter %s needs to be reopened\n",
+ "unit 0x%016Lx on port 0x%016Lx on adapter %s needs "
+ "to be reopened\n",
unit->fcp_lun, unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_lboxed");
@@ -4119,9 +3985,8 @@ zfcp_fsf_send_fcp_command_task_handler(s
scpnt = fsf_req->data.send_fcp_command_task.scsi_cmnd;
if (unlikely(!scpnt)) {
ZFCP_LOG_DEBUG
- ("Command with fsf_req 0x%lx is not associated to "
- "a scsi command anymore. Aborted?\n",
- (unsigned long) fsf_req);
+ ("Command with fsf_req %p is not associated to "
+ "a scsi command anymore. Aborted?\n", fsf_req);
goto out;
}
if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTED)) {
@@ -4179,12 +4044,10 @@ zfcp_fsf_send_fcp_command_task_handler(s
ZFCP_LOG_FLAGS(0, "RSP_CODE_LENGTH_MISMATCH\n");
/* hardware bug */
ZFCP_LOG_NORMAL("bug: FCP response code indictates "
- " that the fibre-channel protocol data "
+ "that the fibrechannel protocol data "
"length differs from the burst length. "
- "The problem occured on the unit "
- "with FCP LUN 0x%Lx connected to the "
- "port with WWPN 0x%Lx at the "
- "adapter %s",
+ "The problem occured on unit 0x%016Lx "
+ "on port 0x%016Lx on adapter %s",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
@@ -4199,11 +4062,10 @@ zfcp_fsf_send_fcp_command_task_handler(s
ZFCP_LOG_FLAGS(0, "RSP_CODE_FIELD_INVALID\n");
/* driver or hardware bug */
ZFCP_LOG_NORMAL("bug: FCP response code indictates "
- "that the fibre-channel protocol data "
- "fields were incorrectly set-up. "
+ "that the fibrechannel protocol data "
+ "fields were incorrectly set up. "
"The problem occured on the unit "
- "with FCP LUN 0x%Lx connected to the "
- "port with WWPN 0x%Lx at the "
+ "0x%016Lx on port 0x%016Lx on "
"adapter %s",
unit->fcp_lun,
unit->port->wwpn,
@@ -4220,12 +4082,10 @@ zfcp_fsf_send_fcp_command_task_handler(s
/* hardware bug */
ZFCP_LOG_NORMAL("bug: The FCP response code indicates "
"that conflicting values for the "
- "fibre-channel payload offset from the "
+ "fibrechannel payload offset from the "
"header were found. "
- "The problem occured on the unit "
- "with FCP LUN 0x%Lx connected to the "
- "port with WWPN 0x%Lx at the "
- "adapter %s.\n",
+ "The problem occured on unit 0x%016Lx "
+ "on port 0x%016Lx on adapter %s.\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
@@ -4240,10 +4100,8 @@ zfcp_fsf_send_fcp_command_task_handler(s
ZFCP_LOG_NORMAL("bug: An invalid FCP response "
"code was detected for a command. "
"The problem occured on the unit "
- "with FCP LUN 0x%Lx connected to the "
- "port with WWPN 0x%Lx at the "
- "adapter %s "
- "(debug info 0x%x)\n",
+ "0x%016Lx on port 0x%016Lx on "
+ "adapter %s (debug info 0x%x)\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit),
@@ -4283,9 +4141,7 @@ zfcp_fsf_send_fcp_command_task_handler(s
/* check for overrun */
if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_over)) {
ZFCP_LOG_INFO("A data overrun was detected for a command. "
- "This happened for a command to the unit "
- "with FCP LUN 0x%Lx connected to the "
- "port with WWPN 0x%Lx at the adapter %s. "
+ "unit 0x%016Lx, port 0x%016Lx, adapter %s. "
"The response data length is "
"%d, the original length was %d.\n",
unit->fcp_lun,
@@ -4298,9 +4154,7 @@ zfcp_fsf_send_fcp_command_task_handler(s
/* check for underrun */
if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_under)) {
ZFCP_LOG_DEBUG("A data underrun was detected for a command. "
- "This happened for a command to the unit "
- "with FCP LUN 0x%Lx connected to the "
- "port with WWPN 0x%Lx at the adapter %s. "
+ "unit 0x%016Lx, port 0x%016Lx, adapter %s. "
"The response data length is "
"%d, the original length was %d.\n",
unit->fcp_lun,
@@ -4467,9 +4321,7 @@ zfcp_fsf_send_fcp_command_task_managemen
ZFCP_LOG_FLAGS(0, "RSP_CODE_TASKMAN_UNSUPP\n");
ZFCP_LOG_NORMAL("bug: A reuested task management function "
"is not supported on the target device "
- "The corresponding device is the unit with "
- "FCP LUN 0x%Lx at the port "
- "with WWPN 0x%Lx at the adapter %s\n ",
+ "unit 0x%016Lx, port 0x%016Lx, adapter %s\n ",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
@@ -4479,9 +4331,7 @@ zfcp_fsf_send_fcp_command_task_managemen
ZFCP_LOG_FLAGS(0, "RSP_CODE_TASKMAN_FAILED\n");
ZFCP_LOG_NORMAL("bug: A reuested task management function "
"failed to complete successfully. "
- "The corresponding device is the unit with "
- "FCP LUN 0x%Lx at the port "
- "with WWPN 0x%Lx at the adapter %s.\n",
+ "unit 0x%016Lx, port 0x%016Lx, adapter %s.\n",
unit->fcp_lun,
unit->port->wwpn,
zfcp_get_busid_by_unit(unit));
@@ -4490,9 +4340,7 @@ zfcp_fsf_send_fcp_command_task_managemen
default:
ZFCP_LOG_NORMAL("bug: An invalid FCP response "
"code was detected for a command. "
- "The problem occured on the unit "
- "with FCP LUN 0x%Lx connected to the "
- "port with WWPN 0x%Lx at the adapter %s "
+ "unit 0x%016Lx, port 0x%016Lx, adapter %s "
"(debug info 0x%x)\n",
unit->fcp_lun,
unit->port->wwpn,
@@ -4835,8 +4683,8 @@ zfcp_fsf_req_wait_and_cleanup(struct zfc
signal);
if (signal) {
ZFCP_LOG_DEBUG("Caught signal %i while waiting for the "
- "completion of the request at 0x%lx\n",
- signal, (unsigned long) fsf_req);
+ "completion of the request at %p\n",
+ signal, fsf_req);
retval = signal;
goto out;
}
@@ -5033,10 +4881,10 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *f
if (likely(fsf_req->qtcb)) {
fsf_req->qtcb->prefix.req_seq_no = adapter->fsf_req_seq_no;
fsf_req->seq_no = adapter->fsf_req_seq_no;
- ZFCP_LOG_TRACE("FSF request 0x%lx of adapter 0x%lx gets "
+ ZFCP_LOG_TRACE("FSF request %p of adapter %s gets "
"FSF sequence counter value of %i\n",
- (unsigned long) fsf_req,
- (unsigned long) adapter,
+ fsf_req,
+ zfcp_get_busid_by_adapter(adapter),
fsf_req->qtcb->prefix.req_seq_no);
} else
inc_seq_no = 0;
@@ -5052,18 +4900,18 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *f
add_timer(timer);
}
- ZFCP_LOG_TRACE("request queue of adapter with busid=%s: "
+ ZFCP_LOG_TRACE("request queue of adapter %s: "
"next free SBAL is %i, %i free SBALs\n",
zfcp_get_busid_by_adapter(adapter),
req_queue->free_index,
atomic_read(&req_queue->free_count));
- ZFCP_LOG_DEBUG("Calling do QDIO busid=%s, flags=0x%x, queue_no=%i, "
- "index_in_queue=%i, count=%i, buffers=0x%lx\n",
+ ZFCP_LOG_DEBUG("calling do_QDIO adapter %s, flags=0x%x, queue_no=%i, "
+ "index_in_queue=%i, count=%i, buffers=%p\n",
zfcp_get_busid_by_adapter(adapter),
QDIO_FLAG_SYNC_OUTPUT,
0, fsf_req->sbal_first, fsf_req->sbal_number,
- (unsigned long) &req_queue->buffer[fsf_req->sbal_first]);
+ &req_queue->buffer[fsf_req->sbal_first]);
/*
* adjust the number of free SBALs in request queue as well as
@@ -5126,8 +4974,9 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *f
if (likely(inc_seq_no)) {
adapter->fsf_req_seq_no++;
ZFCP_LOG_TRACE
- ("FSF sequence counter value of adapter 0x%lx "
- "increased to %i\n", (unsigned long) adapter,
+ ("FSF sequence counter value of adapter %s "
+ "increased to %i\n",
+ zfcp_get_busid_by_adapter(adapter),
adapter->fsf_req_seq_no);
}
/* count FSF requests pending */
diff -puN drivers/s390/scsi/zfcp_fsf.h~s390-9-12-zfcp-log-messages-part-2 drivers/s390/scsi/zfcp_fsf.h
--- 25/drivers/s390/scsi/zfcp_fsf.h~s390-9-12-zfcp-log-messages-part-2 2004-04-08 13:55:24.606283448 -0700
+++ 25-akpm/drivers/s390/scsi/zfcp_fsf.h 2004-04-08 13:55:24.627280256 -0700
@@ -196,23 +196,16 @@
/* channel features */
#define FSF_FEATURE_QTCB_SUPPRESSION 0x00000001
#define FSF_FEATURE_CFDC 0x00000002
-#define FSF_FEATURE_LOST_SAN_NOTIFICATION 0x00000008
#define FSF_FEATURE_HBAAPI_MANAGEMENT 0x00000010
#define FSF_FEATURE_ELS_CT_CHAINED_SBALS 0x00000020
/* option */
#define FSF_OPEN_LUN_SUPPRESS_BOXING 0x00000001
-#define FSF_OPEN_LUN_UNSOLICITED_SENSE_DATA 0x00000002
/* adapter types */
#define FSF_ADAPTER_TYPE_FICON 0x00000001
#define FSF_ADAPTER_TYPE_FICON_EXPRESS 0x00000002
-/* flags */
-#define FSF_CFDC_OPEN_LUN_ALLOWED 0x01
-#define FSF_CFDC_EXCLUSIVE_ACCESS 0x02
-#define FSF_CFDC_OUTBOUND_TRANSFER_ALLOWED 0x10
-
/* port types */
#define FSF_HBA_PORTTYPE_UNKNOWN 0x00000001
#define FSF_HBA_PORTTYPE_NOTPRESENT 0x00000003
@@ -328,18 +321,7 @@ union fsf_status_qual {
u8 byte[FSF_STATUS_QUALIFIER_SIZE];
u16 halfword[FSF_STATUS_QUALIFIER_SIZE / sizeof (u16)];
u32 word[FSF_STATUS_QUALIFIER_SIZE / sizeof (u32)];
- struct {
- u32 this_cmd;
- u32 aborted_cmd;
- } port_handle;
- struct {
- u32 this_cmd;
- u32 aborted_cmd;
- } lun_handle;
- struct {
- u64 found;
- u64 expected;
- } fcp_lun;
+ struct fsf_queue_designator fsf_queue_designator;
} __attribute__ ((packed));
struct fsf_qtcb_header {
@@ -399,8 +381,7 @@ struct fsf_qtcb_bottom_support {
u32 service_class;
u8 res3[3];
u8 timeout;
- u32 lun_access;
- u8 res4[180];
+ u8 res4[184];
u32 els1_length;
u32 els2_length;
u32 req_buf_length;
diff -puN drivers/s390/scsi/zfcp_qdio.c~s390-9-12-zfcp-log-messages-part-2 drivers/s390/scsi/zfcp_qdio.c
--- 25/drivers/s390/scsi/zfcp_qdio.c~s390-9-12-zfcp-log-messages-part-2 2004-04-08 13:55:24.608283144 -0700
+++ 25-akpm/drivers/s390/scsi/zfcp_qdio.c 2004-04-08 13:55:24.630279800 -0700
@@ -76,16 +76,15 @@ zfcp_qdio_buffers_enqueue(struct qdio_bu
struct qdio_buffer *first_in_page = NULL;
qdio_buffers_per_page = PAGE_SIZE / sizeof (struct qdio_buffer);
- ZFCP_LOG_TRACE("Buffers per page %d.\n", qdio_buffers_per_page);
+ ZFCP_LOG_TRACE("buffers_per_page=%d\n", qdio_buffers_per_page);
for (buf_pos = 0; buf_pos < count; buf_pos++) {
if (page_pos == 0) {
cur_buf[buf_pos] = (struct qdio_buffer *)
get_zeroed_page(GFP_KERNEL);
if (cur_buf[buf_pos] == NULL) {
- ZFCP_LOG_INFO("error: Could not allocate "
- "memory for qdio transfer "
- "structures.\n");
+ ZFCP_LOG_INFO("error: allocation of "
+ "QDIO buffer failed \n");
goto out;
}
first_in_page = cur_buf[buf_pos];
@@ -115,7 +114,7 @@ zfcp_qdio_buffers_dequeue(struct qdio_bu
int qdio_buffers_per_page;
qdio_buffers_per_page = PAGE_SIZE / sizeof (struct qdio_buffer);
- ZFCP_LOG_TRACE("Buffers per page %d.\n", qdio_buffers_per_page);
+ ZFCP_LOG_TRACE("buffers_per_page=%d\n", qdio_buffers_per_page);
for (buf_pos = 0; buf_pos < count; buf_pos += qdio_buffers_per_page)
free_page((unsigned long) cur_buf[buf_pos]);
@@ -133,9 +132,8 @@ zfcp_qdio_allocate_queues(struct zfcp_ad
zfcp_qdio_buffers_enqueue(&(adapter->request_queue.buffer[0]),
QDIO_MAX_BUFFERS_PER_Q);
if (buffer_count < QDIO_MAX_BUFFERS_PER_Q) {
- ZFCP_LOG_DEBUG("error: Out of memory allocating "
- "request queue, only %d buffers got. "
- "Binning them.\n", buffer_count);
+ ZFCP_LOG_DEBUG("only %d QDIO buffers allocated for request "
+ "queue\n", buffer_count);
zfcp_qdio_buffers_dequeue(&(adapter->request_queue.buffer[0]),
buffer_count);
retval = -ENOMEM;
@@ -146,12 +144,11 @@ zfcp_qdio_allocate_queues(struct zfcp_ad
zfcp_qdio_buffers_enqueue(&(adapter->response_queue.buffer[0]),
QDIO_MAX_BUFFERS_PER_Q);
if (buffer_count < QDIO_MAX_BUFFERS_PER_Q) {
- ZFCP_LOG_DEBUG("error: Out of memory allocating "
- "response queue, only %d buffers got. "
- "Binning them.\n", buffer_count);
+ ZFCP_LOG_DEBUG("only %d QDIO buffers allocated for response "
+ "queue", buffer_count);
zfcp_qdio_buffers_dequeue(&(adapter->response_queue.buffer[0]),
buffer_count);
- ZFCP_LOG_TRACE("Deallocating request_queue Buffers.\n");
+ ZFCP_LOG_TRACE("freeing request_queue buffers\n");
zfcp_qdio_buffers_dequeue(&(adapter->request_queue.buffer[0]),
QDIO_MAX_BUFFERS_PER_Q);
retval = -ENOMEM;
@@ -165,11 +162,11 @@ zfcp_qdio_allocate_queues(struct zfcp_ad
void
zfcp_qdio_free_queues(struct zfcp_adapter *adapter)
{
- ZFCP_LOG_TRACE("Deallocating request_queue Buffers.\n");
+ ZFCP_LOG_TRACE("freeing request_queue buffers\n");
zfcp_qdio_buffers_dequeue(&(adapter->request_queue.buffer[0]),
QDIO_MAX_BUFFERS_PER_Q);
- ZFCP_LOG_TRACE("Deallocating response_queue Buffers.\n");
+ ZFCP_LOG_TRACE("freeing response_queue buffers\n");
zfcp_qdio_buffers_dequeue(&(adapter->response_queue.buffer[0]),
QDIO_MAX_BUFFERS_PER_Q);
}
@@ -237,8 +234,8 @@ zfcp_qdio_handler_error_check(struct zfc
ZFCP_LOG_FLAGS(1, "QDIO_STATUS_LOOK_FOR_ERROR \n");
- ZFCP_LOG_INFO("A qdio problem occured. The status, qdio_error "
- "and siga_error are 0x%x, 0x%x and 0x%x\n",
+ ZFCP_LOG_INFO("QDIO problem occurred (status=0x%x, "
+ "qdio_error=0x%x, siga_error=0x%x)\n",
status, qdio_error, siga_error);
if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION) {
@@ -273,8 +270,8 @@ zfcp_qdio_handler_error_check(struct zfc
ZFCP_LOG_FLAGS(1, "SLSB_P_OUTPUT_ERROR\n");
break;
default:
- ZFCP_LOG_NORMAL("bug: Unknown qdio error reported "
- "(debug info 0x%x)\n", qdio_error);
+ ZFCP_LOG_NORMAL("bug: unknown QDIO error 0x%x\n",
+ qdio_error);
break;
}
/* Restarting IO on the failed adapter from scratch */
@@ -317,7 +314,7 @@ zfcp_qdio_request_handler(struct ccw_dev
adapter = (struct zfcp_adapter *) int_parm;
queue = &adapter->request_queue;
- ZFCP_LOG_DEBUG("busid=%s, first=%d, count=%d\n",
+ ZFCP_LOG_DEBUG("adapter %s, first=%d, elements_processed=%d\n",
zfcp_get_busid_by_adapter(adapter),
first_element, elements_processed);
@@ -336,7 +333,7 @@ zfcp_qdio_request_handler(struct ccw_dev
atomic_add(elements_processed, &queue->free_count);
ZFCP_LOG_DEBUG("free_count=%d\n", atomic_read(&queue->free_count));
wake_up(&adapter->request_wq);
- ZFCP_LOG_DEBUG("Elements_processed = %d, free count=%d\n",
+ ZFCP_LOG_DEBUG("elements_processed=%d, free count=%d\n",
elements_processed, atomic_read(&queue->free_count));
out:
return;
@@ -383,7 +380,7 @@ zfcp_qdio_response_handler(struct ccw_de
*/
buffere = &(queue->buffer[first_element]->element[0]);
- ZFCP_LOG_DEBUG("first BUFFERE flags=0x%x \n", buffere->flags);
+ ZFCP_LOG_DEBUG("first BUFFERE flags=0x%x\n", buffere->flags);
/*
* go through all SBALs from input queue currently
* returned by QDIO layer
@@ -406,19 +403,20 @@ zfcp_qdio_response_handler(struct ccw_de
(void *) buffere->addr);
if (retval) {
- ZFCP_LOG_NORMAL
- ("bug: Inbound packet seems not to "
- "have been sent at all. It will be "
- "ignored. (debug info 0x%lx, 0x%lx, "
- "%d, %d, %s)\n",
- (unsigned long) buffere->addr,
- (unsigned long) &(buffere->addr),
- first_element, elements_processed,
- zfcp_get_busid_by_adapter(adapter));
- ZFCP_LOG_NORMAL("Dump of inbound BUFFER %d "
- "BUFFERE %d at address 0x%lx\n",
- buffer_index, buffere_index,
- (unsigned long) buffer);
+ ZFCP_LOG_NORMAL("bug: unexpected inbound "
+ "packet on adapter %s "
+ "(reqid=0x%lx, "
+ "first_element=%d, "
+ "elements_processed=%d)\n",
+ zfcp_get_busid_by_adapter(adapter),
+ (unsigned long) buffere->addr,
+ first_element,
+ elements_processed);
+ ZFCP_LOG_NORMAL("hex dump of inbound buffer "
+ "at address %p "
+ "(buffer_index=%d, "
+ "buffere_index=%d)\n", buffer,
+ buffer_index, buffere_index);
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
(char *) buffer, SBAL_SIZE);
}
@@ -445,8 +443,9 @@ zfcp_qdio_response_handler(struct ccw_de
count = atomic_read(&queue->free_count) + elements_processed;
start = queue->free_index;
- ZFCP_LOG_TRACE("Calling do QDIO busid=%s, flags=0x%x, queue_no=%i, "
- "index_in_queue=%i, count=%i, buffers=0x%lx\n",
+ ZFCP_LOG_TRACE("calling do_QDIO on adapter %s (flags=0x%x, "
+ "queue_no=%i, index_in_queue=%i, count=%i, "
+ "buffers=0x%lx\n",
zfcp_get_busid_by_adapter(adapter),
QDIO_FLAG_SYNC_INPUT | QDIO_FLAG_UNDER_INTERRUPT,
0, start, count, (unsigned long) &queue->buffer[start]);
@@ -457,15 +456,16 @@ zfcp_qdio_response_handler(struct ccw_de
if (unlikely(retval)) {
atomic_set(&queue->free_count, count);
- ZFCP_LOG_DEBUG("Inbound data regions could not be cleared "
- "Transfer queues may be down. "
- "(info %d, %d, %d)\n", count, start, retval);
+ ZFCP_LOG_DEBUG("clearing of inbound data regions failed, "
+ "queues may be down "
+ "(count=%d, start=%d, retval=%d)\n",
+ count, start, retval);
} else {
queue->free_index += count;
queue->free_index %= QDIO_MAX_BUFFERS_PER_Q;
atomic_set(&queue->free_count, 0);
- ZFCP_LOG_TRACE("%i buffers successfully enqueued to response "
- "queue starting at position %i\n", count, start);
+ ZFCP_LOG_TRACE("%i buffers enqueued to response "
+ "queue at position %i\n", count, start);
}
out:
return;
@@ -491,8 +491,7 @@ zfcp_qdio_reqid_check(struct zfcp_adapte
/* invalid (per convention used in this driver) */
if (unlikely(!sbale_addr)) {
- ZFCP_LOG_NORMAL
- ("bug: Inbound data faulty, contains null-pointer!\n");
+ ZFCP_LOG_NORMAL("bug: invalid reqid\n");
retval = -EINVAL;
goto out;
}
@@ -501,11 +500,9 @@ zfcp_qdio_reqid_check(struct zfcp_adapte
fsf_req = (struct zfcp_fsf_req *) sbale_addr;
if (unlikely(adapter != fsf_req->adapter)) {
- ZFCP_LOG_NORMAL("bug: An inbound FSF acknowledgement was not "
- "correct (debug info 0x%lx, 0x%lx, 0%lx) \n",
- (unsigned long) fsf_req,
- (unsigned long) fsf_req->adapter,
- (unsigned long) adapter);
+ ZFCP_LOG_NORMAL("bug: invalid reqid (fsf_req=%p, "
+ "fsf_req->adapter=%p, adapter=%p)\n",
+ fsf_req, fsf_req->adapter, adapter);
retval = -EINVAL;
goto out;
}
@@ -515,10 +512,9 @@ zfcp_qdio_reqid_check(struct zfcp_adapte
&fsf_req->qtcb->prefix.req_seq_no, sizeof (u32));
}
- ZFCP_LOG_TRACE("fsf_req at 0x%lx, QTCB at 0x%lx\n",
- (unsigned long) fsf_req, (unsigned long) fsf_req->qtcb);
+ ZFCP_LOG_TRACE("fsf_req at %p, QTCB at %p\n", fsf_req, fsf_req->qtcb);
if (likely(fsf_req->qtcb)) {
- ZFCP_LOG_TRACE("HEX DUMP OF 1ST BUFFERE PAYLOAD (QTCB):\n");
+ ZFCP_LOG_TRACE("hex dump of QTCB:\n");
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) fsf_req->qtcb,
sizeof(struct fsf_qtcb));
}
@@ -889,8 +885,8 @@ zfcp_qdio_zero_sbals(struct qdio_buffer
for (cur_pos = first; cur_pos < (first + clean_count); cur_pos++) {
index = cur_pos % QDIO_MAX_BUFFERS_PER_Q;
memset(buf[index], 0, sizeof (struct qdio_buffer));
- ZFCP_LOG_TRACE("zeroing BUFFER %d at address 0x%lx\n",
- index, (unsigned long) buf[index]);
+ ZFCP_LOG_TRACE("zeroing BUFFER %d at address %p\n",
+ index, buf[index]);
}
}
diff -puN drivers/s390/scsi/zfcp_scsi.c~s390-9-12-zfcp-log-messages-part-2 drivers/s390/scsi/zfcp_scsi.c
--- 25/drivers/s390/scsi/zfcp_scsi.c~s390-9-12-zfcp-log-messages-part-2 2004-04-08 13:55:24.610282840 -0700
+++ 25-akpm/drivers/s390/scsi/zfcp_scsi.c 2004-04-08 13:55:24.632279496 -0700
@@ -212,8 +212,8 @@ zfcp_scsi_slave_destroy(struct scsi_devi
unit->device = NULL;
zfcp_unit_put(unit);
} else {
- ZFCP_LOG_INFO("no unit associated with SCSI device at "
- "address 0x%lx\n", (unsigned long) sdpnt);
+ ZFCP_LOG_NORMAL("bug: no unit associated with SCSI device at "
+ "address %p\n", sdpnt);
}
}
@@ -273,11 +273,9 @@ zfcp_scsi_command_async(struct zfcp_adap
if (unlikely(
atomic_test_mask(ZFCP_STATUS_COMMON_ERP_FAILED, &unit->status) ||
!atomic_test_mask(ZFCP_STATUS_COMMON_RUNNING, &unit->status))) {
- ZFCP_LOG_DEBUG("Stopping SCSI IO on the unit with "
- "FCP LUN 0x%Lx connected to the port "
- "with WWPN 0x%Lx at the adapter %s.\n",
- unit->fcp_lun,
- unit->port->wwpn,
+ ZFCP_LOG_DEBUG("stopping SCSI I/O on unit 0x%016Lx on port "
+ "0x%016Lx on adapter %s\n",
+ unit->fcp_lun, unit->port->wwpn,
zfcp_get_busid_by_adapter(adapter));
zfcp_scsi_command_fail(scpnt, DID_ERROR);
goto out;
@@ -285,8 +283,8 @@ zfcp_scsi_command_async(struct zfcp_adap
if (unlikely(
!atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &unit->status))) {
- ZFCP_LOG_DEBUG("adapter %s not ready or unit with LUN 0x%Lx "
- "on the port with WWPN 0x%Lx in recovery.\n",
+ ZFCP_LOG_DEBUG("adapter %s not ready or unit 0x%016Lx "
+ "on port 0x%016Lx in recovery\n",
zfcp_get_busid_by_unit(unit),
unit->fcp_lun, unit->port->wwpn);
retval = SCSI_MLQUEUE_DEVICE_BUSY;
@@ -297,7 +295,7 @@ zfcp_scsi_command_async(struct zfcp_adap
ZFCP_REQ_AUTO_CLEANUP);
if (unlikely(tmp < 0)) {
- ZFCP_LOG_DEBUG("error: Could not send a Send FCP Command\n");
+ ZFCP_LOG_DEBUG("error: initiation of Send FCP Cmnd failed\n");
retval = SCSI_MLQUEUE_HOST_BUSY;
} else {
debug_text_event(adapter->req_dbf, 3, "q_scpnt");
@@ -443,11 +441,8 @@ zfcp_scsi_eh_abort_handler(struct scsi_c
scpnt->cmnd,
min(scpnt->cmd_len, (unsigned char) ZFCP_ABORT_DBF_LENGTH));
- /*TRACE*/
- ZFCP_LOG_INFO
- ("Aborting for adapter=0x%lx, busid=%s, scsi_cmnd=0x%lx\n",
- (unsigned long) adapter, zfcp_get_busid_by_adapter(adapter),
- (unsigned long) scpnt);
+ ZFCP_LOG_INFO("aborting scsi_cmnd=%p on adapter %s\n",
+ scpnt, zfcp_get_busid_by_adapter(adapter));
spin_unlock_irq(scsi_host->host_lock);
@@ -469,7 +464,7 @@ zfcp_scsi_eh_abort_handler(struct scsi_c
*/
req_data = (union zfcp_req_data *) scpnt->host_scribble;
/* DEBUG */
- ZFCP_LOG_DEBUG("req_data=0x%lx\n", (unsigned long) req_data);
+ ZFCP_LOG_DEBUG("req_data=%p\n", req_data);
if (!req_data) {
ZFCP_LOG_DEBUG("late command completion overtook abort\n");
/*
@@ -489,11 +484,10 @@ zfcp_scsi_eh_abort_handler(struct scsi_c
dbf_timeout =
(jiffies - req_data->send_fcp_command_task.start_jiffies) / HZ;
- /* DEBUG */
- ZFCP_LOG_DEBUG("old_fsf_req=0x%lx\n", (unsigned long) old_fsf_req);
+ ZFCP_LOG_DEBUG("old_fsf_req=%p\n", old_fsf_req);
if (!old_fsf_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
- ZFCP_LOG_NORMAL("bug: No old fsf request found.\n");
+ ZFCP_LOG_NORMAL("bug: no old fsf request found\n");
ZFCP_LOG_NORMAL("req_data:\n");
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
(char *) req_data, sizeof (union zfcp_req_data));
@@ -517,8 +511,7 @@ zfcp_scsi_eh_abort_handler(struct scsi_c
* Since this lock will not be held, fsf_req may complete
* late and may be released meanwhile.
*/
- ZFCP_LOG_DEBUG("unit=0x%lx, unit_fcp_lun=0x%Lx\n",
- (unsigned long) unit, unit->fcp_lun);
+ ZFCP_LOG_DEBUG("unit 0x%016Lx (%p)\n", unit->fcp_lun, unit);
/*
* The 'Abort FCP Command' routine may block (call schedule)
@@ -533,18 +526,18 @@ zfcp_scsi_eh_abort_handler(struct scsi_c
new_fsf_req = zfcp_fsf_abort_fcp_command((unsigned long) old_fsf_req,
adapter,
unit, ZFCP_WAIT_FOR_SBAL);
- ZFCP_LOG_DEBUG("new_fsf_req=0x%lx\n", (unsigned long) new_fsf_req);
+ ZFCP_LOG_DEBUG("new_fsf_req=%p\n", new_fsf_req);
if (!new_fsf_req) {
retval = FAILED;
- ZFCP_LOG_DEBUG("warning: Could not abort SCSI command "
- "at 0x%lx\n", (unsigned long) scpnt);
+ ZFCP_LOG_NORMAL("error: initiation of Abort FCP Cmnd "
+ "failed\n");
strncpy(dbf_result, "##nores", ZFCP_ABORT_DBF_LENGTH);
goto out;
}
/* wait for completion of abort */
- ZFCP_LOG_DEBUG("Waiting for cleanup....\n");
-#ifdef 1
+ ZFCP_LOG_DEBUG("waiting for cleanup...\n");
+#if 1
/*
* FIXME:
* copying zfcp_fsf_req_wait_and_cleanup code is not really nice
@@ -615,11 +608,11 @@ zfcp_scsi_eh_device_reset_handler(struct
spin_unlock_irq(scsi_host->host_lock);
if (!unit) {
- ZFCP_LOG_NORMAL("bug: Tried to reset a non existant unit.\n");
+ ZFCP_LOG_NORMAL("bug: Tried reset for nonexistent unit\n");
retval = SUCCESS;
goto out;
}
- ZFCP_LOG_NORMAL("Resetting Device fcp_lun=0x%Lx\n", unit->fcp_lun);
+ ZFCP_LOG_NORMAL("resetting unit 0x%016Lx\n", unit->fcp_lun);
/*
* If we do not know whether the unit supports 'logical unit reset'
@@ -633,18 +626,15 @@ zfcp_scsi_eh_device_reset_handler(struct
retval =
zfcp_task_management_function(unit, LOGICAL_UNIT_RESET);
if (retval) {
- ZFCP_LOG_DEBUG
- ("logical unit reset failed (unit=0x%lx)\n",
- (unsigned long) unit);
+ ZFCP_LOG_DEBUG("unit reset failed (unit=%p)\n", unit);
if (retval == -ENOTSUPP)
atomic_set_mask
(ZFCP_STATUS_UNIT_NOTSUPPUNITRESET,
&unit->status);
/* fall through and try 'target reset' next */
} else {
- ZFCP_LOG_DEBUG
- ("logical unit reset succeeded (unit=0x%lx)\n",
- (unsigned long) unit);
+ ZFCP_LOG_DEBUG("unit reset succeeded (unit=%p)\n",
+ unit);
/* avoid 'target reset' */
retval = SUCCESS;
goto out;
@@ -652,12 +642,10 @@ zfcp_scsi_eh_device_reset_handler(struct
}
retval = zfcp_task_management_function(unit, TARGET_RESET);
if (retval) {
- ZFCP_LOG_DEBUG("target reset failed (unit=0x%lx)\n",
- (unsigned long) unit);
+ ZFCP_LOG_DEBUG("target reset failed (unit=%p)\n", unit);
retval = FAILED;
} else {
- ZFCP_LOG_DEBUG("target reset succeeded (unit=0x%lx)\n",
- (unsigned long) unit);
+ ZFCP_LOG_DEBUG("target reset succeeded (unit=%p)\n", unit);
retval = SUCCESS;
}
out:
@@ -677,13 +665,9 @@ zfcp_task_management_function(struct zfc
fsf_req = zfcp_fsf_send_fcp_command_task_management
(adapter, unit, tm_flags, ZFCP_WAIT_FOR_SBAL);
if (!fsf_req) {
- ZFCP_LOG_INFO("error: Out of resources. Could not create a "
- "task management (abort, reset, etc) request "
- "for the unit with FCP-LUN 0x%Lx connected to "
- "the port with WWPN 0x%Lx connected to "
- "the adapter %s.\n",
- unit->fcp_lun,
- unit->port->wwpn,
+ ZFCP_LOG_INFO("error: creation of task management request "
+ "failed for unit 0x%016Lx on port 0x%016Lx on "
+ "adapter %s\n", unit->fcp_lun, unit->port->wwpn,
zfcp_get_busid_by_adapter(adapter));
retval = -ENOMEM;
goto out;
@@ -722,10 +706,8 @@ zfcp_scsi_eh_bus_reset_handler(struct sc
spin_unlock_irq(scsi_host->host_lock);
unit = (struct zfcp_unit *) scpnt->device->hostdata;
- /*DEBUG*/
- ZFCP_LOG_NORMAL("Resetting because of problems with "
- "unit=0x%lx, unit_fcp_lun=0x%Lx\n",
- (unsigned long) unit, unit->fcp_lun);
+ ZFCP_LOG_NORMAL("bus reset because of problems with "
+ "unit 0x%016Lx\n", unit->fcp_lun);
zfcp_erp_adapter_reopen(unit->port->adapter, 0);
zfcp_erp_wait(unit->port->adapter);
retval = SUCCESS;
@@ -751,10 +733,8 @@ zfcp_scsi_eh_host_reset_handler(struct s
spin_unlock_irq(scsi_host->host_lock);
unit = (struct zfcp_unit *) scpnt->device->hostdata;
- /*DEBUG*/
- ZFCP_LOG_NORMAL("Resetting because of problems with "
- "unit=0x%lx, unit_fcp_lun=0x%Lx\n",
- (unsigned long) unit, unit->fcp_lun);
+ ZFCP_LOG_NORMAL("host reset because of problems with "
+ "unit 0x%016Lx\n", unit->fcp_lun);
zfcp_erp_adapter_reopen(unit->port->adapter, 0);
zfcp_erp_wait(unit->port->adapter);
retval = SUCCESS;
@@ -780,15 +760,13 @@ zfcp_adapter_scsi_register(struct zfcp_a
adapter->scsi_host = scsi_host_alloc(&zfcp_data.scsi_host_template,
sizeof (struct zfcp_adapter *));
if (!adapter->scsi_host) {
- ZFCP_LOG_NORMAL("error: Not enough free memory. "
- "Could not register adapter %s "
- "with the SCSI-stack.\n",
+ ZFCP_LOG_NORMAL("error: registration with SCSI stack failed "
+ "for adapter %s ",
zfcp_get_busid_by_adapter(adapter));
retval = -EIO;
goto out;
}
- ZFCP_LOG_DEBUG("host registered, scsi_host at 0x%lx\n",
- (unsigned long) adapter->scsi_host);
+ ZFCP_LOG_DEBUG("host registered, scsi_host=%p\n", adapter->scsi_host);
/* tell the SCSI stack some characteristics of this adapter */
adapter->scsi_host->max_id = 1;
_