From: <gerg@snapgear.com>
A couple of fixes for the DragonEngine sepcific setup code:
. remove cs8900 ethernet setup from here
. add type specifier to printk calls (from kernel janitors)
---
25-akpm/arch/m68knommu/platform/68VZ328/de2/config.c | 15 +--------------
1 files changed, 1 insertion(+), 14 deletions(-)
diff -puN arch/m68knommu/platform/68VZ328/de2/config.c~mk68knommu-dragonengine-setup-code-printk-cleanup arch/m68knommu/platform/68VZ328/de2/config.c
--- 25/arch/m68knommu/platform/68VZ328/de2/config.c~mk68knommu-dragonengine-setup-code-printk-cleanup 2004-04-10 15:19:59.989115000 -0700
+++ 25-akpm/arch/m68knommu/platform/68VZ328/de2/config.c 2004-04-10 15:19:59.994114240 -0700
@@ -103,19 +103,6 @@ static void dragen2_reset(void)
);
}
-int dragen2_cs8900_setup(struct net_device *dev)
-{
- static int nbdev = 0;
-
- if (++nbdev == 1) {
- /* Set the ETH hardware address from its flash monitor location */
- memcpy(dev->dev_addr, (void *) 0x400fffa, 6);
- dev->irq = INT1_IRQ_NUM;
- return dev->base_addr = 0x08000041;
- }
- return 1; /* no more interface */
-}
-
static void init_hardware(void)
{
#ifdef CONFIG_DIRECT_IO_ACCESS
@@ -185,7 +172,7 @@ static void init_hardware(void)
void config_BSP(char *command, int size)
{
- printk("68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
+ printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
#if defined(CONFIG_BOOTPARAM)
strncpy(command, CONFIG_BOOTPARAM_STRING, size);
_