From: Rusty Russell <rusty@rustcorp.com.au>
From: "Petri T. Koistinen" <petri.koistinen@iki.fi>
1) Various URLs in the Kconfig files are out of date: update them.
2) URLs should be of form <http://url-goes-here>.
3) References to files in the source should be of form
<file:path-from-top>
4) Email addresses should be of form <foo@bar.com>
---
25-akpm/arch/i386/Kconfig | 8 +--
25-akpm/arch/i386/kernel/cpu/cpufreq/Kconfig | 28 ++++++-------
25-akpm/arch/um/Kconfig | 2
25-akpm/drivers/block/paride/Kconfig | 2
25-akpm/drivers/char/Kconfig | 6 +-
25-akpm/drivers/cpufreq/Kconfig | 6 +-
25-akpm/drivers/isdn/sc/Kconfig | 3 -
25-akpm/drivers/media/Kconfig | 2
25-akpm/drivers/media/dvb/ttusb-dec/Kconfig | 2
25-akpm/drivers/media/radio/Kconfig | 58 +++++++++++++--------------
25-akpm/drivers/media/video/Kconfig | 6 +-
25-akpm/drivers/mtd/devices/Kconfig | 6 +-
25-akpm/drivers/mtd/maps/Kconfig | 16 +++----
25-akpm/drivers/mtd/nand/Kconfig | 4 -
25-akpm/init/Kconfig | 7 +--
25-akpm/kernel/power/Kconfig | 6 +-
25-akpm/security/selinux/Kconfig | 2
25-akpm/sound/oss/Kconfig | 4 -
18 files changed, 83 insertions(+), 85 deletions(-)
diff -puN arch/i386/Kconfig~kconfig-url-fixes arch/i386/Kconfig
--- 25/arch/i386/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.306637288 -0800
+++ 25-akpm/arch/i386/Kconfig 2004-03-25 11:12:29.332633336 -0800
@@ -70,7 +70,7 @@ config X86_NUMAQ
multiquad box. This changes the way that processors are bootstrapped,
and uses Clustered Logical APIC addressing mode instead of Flat Logical.
You will need a new lynxer.elf file to flash your firmware with - send
- email to Martin.Bligh@us.ibm.com
+ email to <Martin.Bligh@us.ibm.com>.
config X86_SUMMIT
bool "Summit/EXA (IBM x440)"
@@ -598,7 +598,7 @@ config I8K
For information on utilities to make use of this driver see the
I8K Linux utilities web site at:
- <http://www.debian.org/~dz/i8k/>
+ <http://people.debian.org/~dz/i8k/>
Say Y if you intend to run this kernel on a Dell Inspiron 8000.
Say N otherwise.
@@ -809,8 +809,8 @@ config EFI
This option is only useful on systems that have EFI firmware
and will result in a kernel image that is ~8k larger. In addition,
you must use the latest ELILO loader available at
- ftp.hpl.hp.com/pub/linux-ia64/ in order to take advantage of kernel
- initialization using EFI information (neither GRUB nor LILO know
+ <ftp://ftp.hpl.hp.com/pub/linux-ia64/> in order to take advantage of
+ kernel initialization using EFI information (neither GRUB nor LILO know
anything about EFI). However, even with this option, the resultant
kernel should continue to boot on existing non-EFI platforms.
diff -puN arch/i386/kernel/cpu/cpufreq/Kconfig~kconfig-url-fixes arch/i386/kernel/cpu/cpufreq/Kconfig
--- 25/arch/i386/kernel/cpu/cpufreq/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.307637136 -0800
+++ 25-akpm/arch/i386/kernel/cpu/cpufreq/Kconfig 2004-03-25 11:12:29.333633184 -0800
@@ -11,8 +11,8 @@ config CPU_FREQ
fly. This is a nice method to save battery power on notebooks,
because the lower the clock speed, the less power the CPU consumes.
- For more information, take a look at linux/Documentation/cpu-freq or
- at <http://www.codemonkey.org.uk/projects/cpufreq/>
+ For more information, take a look at <file:Documentation/cpu-freq/>
+ or at <http://www.codemonkey.org.uk/projects/cpufreq/>
If in doubt, say N.
@@ -38,7 +38,7 @@ config X86_ACPI_CPUFREQ
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -63,7 +63,7 @@ config ELAN_CPUFREQ
parameter: elanfreq=maxspeed (in kHz) or as module
parameter "max_freq".
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -74,7 +74,7 @@ config X86_POWERNOW_K6
This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
AMD K6-3+ processors.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -84,7 +84,7 @@ config X86_POWERNOW_K7
help
This adds the CPUFreq driver for mobile AMD K7 mobile processors.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -94,7 +94,7 @@ config X86_POWERNOW_K8
help
This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -105,7 +105,7 @@ config X86_GX_SUSPMOD
This add the CPUFreq driver for NatSemi Geode processors which
support suspend modulation.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -116,7 +116,7 @@ config X86_SPEEDSTEP_CENTRINO
This adds the CPUFreq driver for Enhanced SpeedStep enabled
mobile CPUs. This means Intel Pentium M (Centrino) CPUs.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -144,7 +144,7 @@ config X86_SPEEDSTEP_ICH
mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2,
ICH3 or ICH4 southbridge.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -156,7 +156,7 @@ config X86_SPEEDSTEP_SMI
(Coppermine), all mobile Intel Pentium III-M (Tualatin)
on systems which have an Intel 440BX/ZX/MX southbridge.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -167,7 +167,7 @@ config X86_P4_CLOCKMOD
This adds the CPUFreq driver for Intel Pentium 4 / XEON
processors.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -193,7 +193,7 @@ config X86_LONGRUN
This adds the CPUFreq driver for Transmeta Crusoe processors which
support LongRun.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -205,7 +205,7 @@ config X86_LONGHAUL
VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
processors.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
diff -puN arch/um/Kconfig~kconfig-url-fixes arch/um/Kconfig
--- 25/arch/um/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.309636832 -0800
+++ 25-akpm/arch/um/Kconfig 2004-03-25 11:12:29.333633184 -0800
@@ -261,7 +261,7 @@ config GCOV
This option allows developers to retrieve coverage data from a UML
session.
- See <http://user-mode-linux.sourceforge.net/gcov.html> for more
+ See <http://user-mode-linux.sourceforge.net/gprof.html> for more
details.
If you're involved in UML kernel development and want to use gcov,
diff -puN drivers/block/paride/Kconfig~kconfig-url-fixes drivers/block/paride/Kconfig
--- 25/drivers/block/paride/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.311636528 -0800
+++ 25-akpm/drivers/block/paride/Kconfig 2004-03-25 11:12:29.334633032 -0800
@@ -91,7 +91,7 @@ config PARIDE_PG
driver. See <file:include/linux/pg.h>. for details.
You can obtain the most recent version of cdrtools from
- <ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/>. Versions 1.6.1a3 and
+ <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
later fully support this driver.
comment "Parallel IDE protocol modules"
diff -puN drivers/char/Kconfig~kconfig-url-fixes drivers/char/Kconfig
--- 25/drivers/char/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.312636376 -0800
+++ 25-akpm/drivers/char/Kconfig 2004-03-25 11:12:29.335632880 -0800
@@ -305,7 +305,7 @@ config RIO
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
- information is at <http://www.sphinxcst.co.uk/perle/multi.htm>.
+ information is at <http://www.perle.com/support/documentation.html#multiport>.
There are both ISA and PCI versions.
config RIO_OLDPCI
@@ -415,7 +415,7 @@ config IT8172_SCR0
Say Y here to support smart-card reader 0 (SCR0) on the Integrated
Technology Express, Inc. ITE8172 SBC. Vendor page at
<http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/allies/semiconductor/ite.html>.
+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
config IT8172_SCR1
bool "Enable Smart Card Reader 1 Support "
@@ -424,7 +424,7 @@ config IT8172_SCR1
Say Y here to support smart-card reader 1 (SCR1) on the Integrated
Technology Express, Inc. ITE8172 SBC. Vendor page at
<http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/allies/semiconductor/ite.html>.
+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
diff -puN drivers/cpufreq/Kconfig~kconfig-url-fixes drivers/cpufreq/Kconfig
--- 25/drivers/cpufreq/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.313636224 -0800
+++ 25-akpm/drivers/cpufreq/Kconfig 2004-03-25 11:12:29.335632880 -0800
@@ -6,7 +6,7 @@ config CPU_FREQ_PROC_INTF
CPUFreq. Please note that it is recommended to use the sysfs
interface instead (which is built automatically).
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@@ -65,7 +65,7 @@ config CPU_FREQ_GOV_USERSPACE
be able to set the CPU dynamically, like on LART
<http://www.lart.tudelft.nl/>
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say Y.
@@ -79,6 +79,6 @@ config CPU_FREQ_24_API
the same functionality as long as "userspace" is the
selected governor for the specified CPU.
- For details, take a look at linux/Documentation/cpu-freq.
+ For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
diff -puN drivers/isdn/sc/Kconfig~kconfig-url-fixes drivers/isdn/sc/Kconfig
--- 25/drivers/isdn/sc/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.315635920 -0800
+++ 25-akpm/drivers/isdn/sc/Kconfig 2004-03-25 11:12:29.336632728 -0800
@@ -8,6 +8,5 @@ config ISDN_DRV_SC
This enables support for the Spellcaster BRI ISDN boards. This
driver currently builds only in a modularized version.
To build it, choose M here: the module will be called sc.
- See <file:Documentation/isdn/README.sc> and
- <http://www.spellcast.com/> for more information.
+ See <file:Documentation/isdn/README.sc> for more information.
diff -puN drivers/media/dvb/ttusb-dec/Kconfig~kconfig-url-fixes drivers/media/dvb/ttusb-dec/Kconfig
--- 25/drivers/media/dvb/ttusb-dec/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.316635768 -0800
+++ 25-akpm/drivers/media/dvb/ttusb-dec/Kconfig 2004-03-25 11:12:29.336632728 -0800
@@ -14,6 +14,6 @@ config DVB_TTUSB_DEC
The DEC devices require firmware in order to boot into a mode in
which they are slaves to the PC. See
- linux/Documentation/dvb/ttusb-dec.txt for details.
+ <file:Documentation/dvb/ttusb-dec.txt> for details.
Say Y if you own such a device and want to use it.
diff -puN drivers/media/Kconfig~kconfig-url-fixes drivers/media/Kconfig
--- 25/drivers/media/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.317635616 -0800
+++ 25-akpm/drivers/media/Kconfig 2004-03-25 11:12:29.336632728 -0800
@@ -18,7 +18,7 @@ config VIDEO_DEV
and applications for most video capture functions already exist.
Documentation for the original API is included in the file
- Documentation/video4linux/API.html. Documentation for V4L2 is
+ <file:Documentation/video4linux/API.html>. Documentation for V4L2 is
available on the web at <http://bytesex.org/v4l/>.
To compile this driver as a module, choose M here: the
diff -puN drivers/media/radio/Kconfig~kconfig-url-fixes drivers/media/radio/Kconfig
--- 25/drivers/media/radio/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.318635464 -0800
+++ 25-akpm/drivers/media/radio/Kconfig 2004-03-25 11:12:29.338632424 -0800
@@ -14,11 +14,11 @@ config RADIO_CADET
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
Further documentation on this driver can be found on the WWW at
- <http://linux.blackhawke.net/cadet.html>.
+ <http://linux.blackhawke.net/cadet/>.
To compile this driver as a module, choose M here: the
module will be called radio-cadet.
@@ -41,9 +41,9 @@ config RADIO_RTRACK
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. More
- information is contained in the file
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>. More information is
+ contained in the file
<file:Documentation/video4linux/radiotrack.txt>.
To compile this driver as a module, choose M here: the
@@ -66,8 +66,8 @@ config RADIO_RTRACK2
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-rtrack2.
@@ -89,8 +89,8 @@ config RADIO_AZTECH
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-aztech.
@@ -113,8 +113,8 @@ config RADIO_GEMTEK
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-gemtek.
@@ -137,8 +137,8 @@ config RADIO_GEMTEK_PCI
In order to control your radio card, you will need to use programs
that are compatible with the Video for Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-gemtek-pci.
@@ -152,8 +152,8 @@ config RADIO_MAXIRADIO
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-maxiradio.
@@ -167,8 +167,8 @@ config RADIO_MAESTRO
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-maestro.
@@ -183,8 +183,8 @@ config RADIO_MIROPCM20
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called miropcm20.
@@ -217,8 +217,8 @@ config RADIO_SF16FMI
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-sf16fmi.
@@ -248,12 +248,12 @@ config RADIO_TERRATEC
frequency control and muting works at least for me, but
unfortunately I have not found anybody who wants to use this card
with Linux. So if it is this what YOU are trying to do right now,
- PLEASE DROP ME A NOTE!! Rolf Offermanns (rolf@offermanns.de)
+ PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>.
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-terratec.
@@ -293,8 +293,8 @@ config RADIO_TYPHOON
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-typhoon.
@@ -337,8 +337,8 @@ config RADIO_ZOLTRIX
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found on the WWW at
- <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the
module will be called radio-zoltrix.
diff -puN drivers/media/video/Kconfig~kconfig-url-fixes drivers/media/video/Kconfig
--- 25/drivers/media/video/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.320635160 -0800
+++ 25-akpm/drivers/media/video/Kconfig 2004-03-25 11:12:29.338632424 -0800
@@ -14,7 +14,7 @@ config VIDEO_BT848
---help---
Support for BT848 based frame grabber/overlay boards. This includes
the Miro, Hauppauge and STB boards. Please read the material in
- <file:Documentation/video4linux/bttv> for more information.
+ <file:Documentation/video4linux/bttv/> for more information.
If you say Y or M here, you need to say Y or M to "I2C support" and
"I2C bit-banging interfaces" in the character device section.
@@ -37,8 +37,8 @@ config VIDEO_PLANB
help
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
input hardware. If you want to experiment with this, say Y.
- Otherwise, or if you don't understand a word, say N.
- See <http://www.cpu.lu/~mlan/planb.html> for more info.
+ Otherwise, or if you don't understand a word, say N. See
+ <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
Saying M will compile this driver as a module (planb).
diff -puN drivers/mtd/devices/Kconfig~kconfig-url-fixes drivers/mtd/devices/Kconfig
--- 25/drivers/mtd/devices/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.321635008 -0800
+++ 25-akpm/drivers/mtd/devices/Kconfig 2004-03-25 11:12:29.339632272 -0800
@@ -9,9 +9,9 @@ config MTD_PMC551
depends on MTD && PCI
---help---
This provides a MTD device driver for the Ramix PMC551 RAM PCI card
- from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
- These devices come in memory configurations from 32M - 1G. If you
- have one, you probably want to enable this.
+ from Ramix Inc. <http://www.ramix.com/products/>. These devices come
+ in memory configurations from 32M - 1G. If you have one, you
+ probably want to enable this.
If this driver is compiled as a module you get the ability to select
the size of the aperture window pointing into the devices memory.
diff -puN drivers/mtd/maps/Kconfig~kconfig-url-fixes drivers/mtd/maps/Kconfig
--- 25/drivers/mtd/maps/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.322634856 -0800
+++ 25-akpm/drivers/mtd/maps/Kconfig 2004-03-25 11:12:29.340632120 -0800
@@ -94,7 +94,7 @@ config MTD_SBC_GXX
By default the flash is split into 3 partitions which are accessed
as separate MTD devices. This board utilizes Intel StrataFlash.
More info at
- <http://www.arcomcontrols.com/products/icp/pc104/processors/>.
+ <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
config MTD_ELAN_104NC
tristate "CFI Flash device mapped on Arcom ELAN-104NC"
@@ -104,7 +104,7 @@ config MTD_ELAN_104NC
System's ELAN-104NC development board. By default the flash
is split into 3 partitions which are accessed as separate MTD
devices. This board utilizes Intel StrataFlash. More info at
- <http://www.arcomcontrols.com/products/icp/pc104/processors/>.
+ <http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>.
config MTD_LUBBOCK
tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
@@ -120,7 +120,7 @@ config MTD_OCTAGON
This provides a 'mapping' driver which supports the way in which
the flash chips are connected in the Octagon-5066 Single Board
Computer. More information on the board is available at
- <http://www.octagonsystems.com/Products/5066/5066.html>.
+ <http://www.octagonsystems.com/CPUpages/5066.html>.
config MTD_VMAX
tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
@@ -129,7 +129,7 @@ config MTD_VMAX
This provides a 'mapping' driver which supports the way in which
the flash chips are connected in the Tempustech VMAX SBC301 Single
Board Computer. More information on the board is available at
- <http://www.tempustech.com/tt301.htm>.
+ <http://www.tempustech.com/>.
config MTD_SCx200_DOCFLASH
tristate "Flash device mapped with DOCCS on NatSemi SCx200"
@@ -215,8 +215,8 @@ config MTD_DILNETPC
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
help
MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
- For details, see http://www.ssv-embedded.de/ssv/pc104/p169.htm
- and http://www.ssv-embedded.de/ssv/pc104/p170.htm
+ For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
+ and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>
config MTD_DILNETPC_BOOTSIZE
hex "Size of DIL/Net PC flash boot partition"
@@ -253,7 +253,7 @@ config MTD_RPXLITE
a strange sparse mapping. This 'mapping' driver supports that
arrangement, allowing the CFI probe and command set driver code
to communicate with the chips on the RPXLite board. More at
- <http://www.embeddedplanet.com/rpx_lite_specification_sheet.htm>.
+ <http://www.embeddedplanet.com/>.
config MTD_MBX860
tristate "System flash on MBX860 board"
@@ -394,7 +394,7 @@ config MTD_DC21285
help
This provides a driver for the flash accessed using Intel's
21285 bridge used with Intel's StrongARM processors. More info at
- <http://developer.intel.com/design/bridge/quicklist/dsc-21285.htm>.
+ <http://www.intel.com/design/bridge/docs/21285_documentation.htm>.
config MTD_IQ80310
tristate "CFI Flash device mapped on the XScale IQ80310 board"
diff -puN drivers/mtd/nand/Kconfig~kconfig-url-fixes drivers/mtd/nand/Kconfig
--- 25/drivers/mtd/nand/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.324634552 -0800
+++ 25-akpm/drivers/mtd/nand/Kconfig 2004-03-25 11:12:29.340632120 -0800
@@ -9,8 +9,8 @@ config MTD_NAND
depends on MTD
help
This enables support for accessing all type of NAND flash
- devices with an 8-bit data bus interface. For further
- information see www.linux-mtd.infradead.org/tech/nand.html.
+ devices with an 8-bit data bus interface. For further information see
+ <http://www.linux-mtd.infradead.org/tech/nand.html>.
config MTD_NAND_VERIFY_WRITE
bool "Verify NAND page writes"
diff -puN init/Kconfig~kconfig-url-fixes init/Kconfig
--- 25/init/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.325634400 -0800
+++ 25-akpm/init/Kconfig 2004-03-25 11:12:29.341631968 -0800
@@ -83,13 +83,12 @@ config SYSVIPC
exchange information. It is generally considered to be a good thing,
and some programs won't run unless you say Y here. In particular, if
you want to run the DOS emulator dosemu under Linux (read the
- DOSEMU-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>), you'll need to say Y
- here.
+ DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
+ you'll need to say Y here.
You can find documentation about IPC with "info ipc" and also in
section 6.4 of the Linux Programmer's Guide, available from
- <http://www.tldp.org/docs.html#guide>.
+ <http://www.tldp.org/guides.html>.
config BSD_PROCESS_ACCT
bool "BSD Process Accounting"
diff -puN kernel/power/Kconfig~kconfig-url-fixes kernel/power/Kconfig
--- 25/kernel/power/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.326634248 -0800
+++ 25-akpm/kernel/power/Kconfig 2004-03-25 11:12:29.341631968 -0800
@@ -9,9 +9,9 @@ config PM
Power Management is most important for battery powered laptop
computers; if you have a laptop, check out the Linux Laptop home
- page on the WWW at
- <http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
- Battery Powered Linux mini-HOWTO, available from
+ page on the WWW at <http://www.linux-on-laptops.com/> or
+ Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>
+ and the Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that, even if you say N here, Linux on the x86 architecture
diff -puN security/selinux/Kconfig~kconfig-url-fixes security/selinux/Kconfig
--- 25/security/selinux/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.327634096 -0800
+++ 25-akpm/security/selinux/Kconfig 2004-03-25 11:12:29.341631968 -0800
@@ -7,7 +7,7 @@ config SECURITY_SELINUX
You will also need a policy configuration and a labeled filesystem.
You can obtain the policy compiler (checkpolicy), the utility for
labeling filesystems (setfiles), and an example policy configuration
- from http://www.nsa.gov/selinux.
+ from <http://www.nsa.gov/selinux/>.
If you are unsure how to answer this question, answer N.
config SECURITY_SELINUX_BOOTPARAM
diff -puN sound/oss/Kconfig~kconfig-url-fixes sound/oss/Kconfig
--- 25/sound/oss/Kconfig~kconfig-url-fixes 2004-03-25 11:12:29.329633792 -0800
+++ 25-akpm/sound/oss/Kconfig 2004-03-25 11:12:29.342631816 -0800
@@ -318,7 +318,7 @@ config SOUND_MSNDCLAS
See <file:Documentation/sound/oss/MultiSound> for important information
about this driver. Note that it has been discontinued, but the
Voyetra Turtle Beach knowledge base entry for it is still available
- at <http://www.voyetra-turtle-beach.com/site/kb_ftp/790.asp>.
+ at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
comment "Compiled-in MSND Classic support requires firmware during compilation."
depends on SOUND_PRIME && SOUND_MSNDCLAS=y
@@ -380,7 +380,7 @@ config SOUND_MSNDPIN
See <file:Documentation/sound/oss/MultiSound> for important information
about this driver. Note that it has been discontinued, but the
Voyetra Turtle Beach knowledge base entry for it is still available
- at <http://www.voyetra-turtle-beach.com/site/kb_ftp/600.asp>.
+ at <http://www.turtlebeach.com/site/kb_ftp/600.asp>.
comment "Compiled-in MSND Pinnacle support requires firmware during compilation."
depends on SOUND_PRIME && SOUND_MSNDPIN=y
_