From: Michael Hunold <hunold@linuxtv.org>
- tda1004x: standardised where the firmware should be.
- tda1004x: need to re-invert inversion for tda10046 in get_fe()
- tda1004x: reset chip before uploading firmware
- tda1004x: split firmware upload off from frontend init. the initial tune
attempt was taking too long. provide explanation of tuner frequency
calculations
- tda1004x: Fixed signal strength reading for tda10046h
---
25-akpm/drivers/media/dvb/frontends/tda1004x.c | 556 ++++++++++++++++++++-----
1 files changed, 449 insertions(+), 107 deletions(-)
diff -puN drivers/media/dvb/frontends/tda1004x.c~dvb-07-tda1004x-update drivers/media/dvb/frontends/tda1004x.c
--- 25/drivers/media/dvb/frontends/tda1004x.c~dvb-07-tda1004x-update Mon Feb 23 14:05:12 2004
+++ 25-akpm/drivers/media/dvb/frontends/tda1004x.c Mon Feb 23 14:05:12 2004
@@ -1,6 +1,8 @@
/*
Driver for Philips tda1004xh OFDM Frontend
+ (c) 2003, 2004 Andrew de Quincey & Robert Schlabbach
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -20,7 +22,7 @@
/*
This driver needs a copy of the DLL "ttlcdacc.dll" from the Haupauge or Technotrend
- windows driver saved as '/usr/lib/hotplug/firmware/tda1004x.mc'.
+ windows driver saved as '/usr/lib/hotplug/firmware/tda1004x.bin'.
You can also pass the complete file name with the module parameter 'tda1004x_firmware'.
Currently the DLL from v2.15a of the technotrend driver is supported. Other versions can
@@ -46,16 +48,12 @@
#include "dvb_functions.h"
#ifndef DVB_TDA1004X_FIRMWARE_FILE
-#define DVB_TDA1004X_FIRMWARE_FILE "/usr/lib/hotplug/firmware/tda1004x.mc"
+#define DVB_TDA1004X_FIRMWARE_FILE "/usr/lib/hotplug/firmware/tda1004x.bin"
#endif
static int tda1004x_debug = 0;
static char *tda1004x_firmware = DVB_TDA1004X_FIRMWARE_FILE;
-
-#define TDA10045H_ADDRESS 0x08
-#define TD1344_ADDRESS 0x61
-#define TDM1316L_ADDRESS 0x63
#define MC44BC374_ADDRESS 0x65
#define TDA1004X_CHIPID 0x00
@@ -67,8 +65,8 @@ static char *tda1004x_firmware = DVB_TDA
#define TDA1004X_STATUS_CD 0x06
#define TDA1004X_CONFC4 0x07
#define TDA1004X_DSSPARE2 0x0C
-#define TDA1004X_CODE_IN 0x0D
-#define TDA1004X_FWPAGE 0x0E
+#define TDA10045H_CODE_IN 0x0D
+#define TDA10045H_FWPAGE 0x0E
#define TDA1004X_SCAN_CPT 0x10
#define TDA1004X_DSP_CMD 0x11
#define TDA1004X_DSP_ARG 0x12
@@ -76,10 +74,11 @@ static char *tda1004x_firmware = DVB_TDA
#define TDA1004X_DSP_DATA2 0x14
#define TDA1004X_CONFADC1 0x15
#define TDA1004X_CONFC1 0x16
-#define TDA1004X_SIGNAL_STRENGTH 0x1a
+#define TDA10045H_S_AGC 0x1a
+#define TDA10046H_AGC_TUN_LEVEL 0x1a
#define TDA1004X_SNR 0x1c
-#define TDA1004X_REG1E 0x1e
-#define TDA1004X_REG1F 0x1f
+#define TDA1004X_CONF_TS1 0x1e
+#define TDA1004X_CONF_TS2 0x1f
#define TDA1004X_CBER_RESET 0x20
#define TDA1004X_CBER_MSB 0x21
#define TDA1004X_CBER_LSB 0x22
@@ -88,18 +87,58 @@ static char *tda1004x_firmware = DVB_TDA
#define TDA1004X_VBER_MID 0x25
#define TDA1004X_VBER_LSB 0x26
#define TDA1004X_UNCOR 0x27
-#define TDA1004X_CONFPLL_P 0x2D
-#define TDA1004X_CONFPLL_M_MSB 0x2E
-#define TDA1004X_CONFPLL_M_LSB 0x2F
-#define TDA1004X_CONFPLL_N 0x30
-#define TDA1004X_UNSURW_MSB 0x31
-#define TDA1004X_UNSURW_LSB 0x32
-#define TDA1004X_WREF_MSB 0x33
-#define TDA1004X_WREF_MID 0x34
-#define TDA1004X_WREF_LSB 0x35
-#define TDA1004X_MUXOUT 0x36
+
+#define TDA10045H_CONFPLL_P 0x2D
+#define TDA10045H_CONFPLL_M_MSB 0x2E
+#define TDA10045H_CONFPLL_M_LSB 0x2F
+#define TDA10045H_CONFPLL_N 0x30
+
+#define TDA10046H_CONFPLL1 0x2D
+#define TDA10046H_CONFPLL2 0x2F
+#define TDA10046H_CONFPLL3 0x30
+#define TDA10046H_TIME_WREF1 0x31
+#define TDA10046H_TIME_WREF2 0x32
+#define TDA10046H_TIME_WREF3 0x33
+#define TDA10046H_TIME_WREF4 0x34
+#define TDA10046H_TIME_WREF5 0x35
+
+#define TDA10045H_UNSURW_MSB 0x31
+#define TDA10045H_UNSURW_LSB 0x32
+#define TDA10045H_WREF_MSB 0x33
+#define TDA10045H_WREF_MID 0x34
+#define TDA10045H_WREF_LSB 0x35
+#define TDA10045H_MUXOUT 0x36
#define TDA1004X_CONFADC2 0x37
-#define TDA1004X_IOFFSET 0x38
+
+#define TDA10045H_IOFFSET 0x38
+
+#define TDA10046H_CONF_TRISTATE1 0x3B
+#define TDA10046H_CONF_TRISTATE2 0x3C
+#define TDA10046H_CONF_POLARITY 0x3D
+#define TDA10046H_FREQ_OFFSET 0x3E
+#define TDA10046H_GPIO_OUT_SEL 0x41
+#define TDA10046H_GPIO_SELECT 0x42
+#define TDA10046H_AGC_CONF 0x43
+#define TDA10046H_AGC_GAINS 0x46
+#define TDA10046H_AGC_TUN_MIN 0x47
+#define TDA10046H_AGC_TUN_MAX 0x48
+#define TDA10046H_AGC_IF_MIN 0x49
+#define TDA10046H_AGC_IF_MAX 0x4A
+
+#define TDA10046H_FREQ_PHY2_MSB 0x4D
+#define TDA10046H_FREQ_PHY2_LSB 0x4E
+
+#define TDA10046H_CVBER_CTRL 0x4F
+#define TDA10046H_AGC_IF_LEVEL 0x52
+#define TDA10046H_CODE_CPT 0x57
+#define TDA10046H_CODE_IN 0x58
+
+
+#define FE_TYPE_TDA10045H 0
+#define FE_TYPE_TDA10046H 1
+
+#define TUNER_TYPE_TD1344 0
+#define TUNER_TYPE_TD1316 1
#define dprintk if (tda1004x_debug) printk
@@ -116,11 +155,27 @@ static struct dvb_frontend_info tda10045
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
};
+static struct dvb_frontend_info tda10046h_info = {
+ .name = "Philips TDA10046H",
+ .type = FE_OFDM,
+ .frequency_min = 51000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 166667,
+ .caps =
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
+};
+
+
#pragma pack(1)
struct tda1004x_state {
u8 tda1004x_address;
u8 tuner_address;
u8 initialised:1;
+ u8 tuner_type:2;
+ u8 fe_type:2;
};
#pragma pack()
@@ -132,6 +187,9 @@ struct fwinfo {
static struct fwinfo tda10045h_fwinfo[] = { {.file_size = 286720,.fw_offset = 0x34cc5,.fw_size = 30555} };
static int tda10045h_fwinfo_count = sizeof(tda10045h_fwinfo) / sizeof(struct fwinfo);
+static struct fwinfo tda10046h_fwinfo[] = { {.file_size = 286720,.fw_offset = 0x3c4f9,.fw_size = 24479} };
+static int tda10046h_fwinfo_count = sizeof(tda10046h_fwinfo) / sizeof(struct fwinfo);
+
static int errno;
@@ -246,46 +304,98 @@ static int tda10045h_set_bandwidth(struc
switch (bandwidth) {
case BANDWIDTH_6_MHZ:
tda1004x_write_byte(i2c, tda_state, TDA1004X_DSSPARE2, 0x14);
- tda1004x_write_buf(i2c, tda_state, TDA1004X_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz));
+ tda1004x_write_buf(i2c, tda_state, TDA10045H_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz));
break;
case BANDWIDTH_7_MHZ:
tda1004x_write_byte(i2c, tda_state, TDA1004X_DSSPARE2, 0x80);
- tda1004x_write_buf(i2c, tda_state, TDA1004X_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz));
+ tda1004x_write_buf(i2c, tda_state, TDA10045H_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz));
break;
case BANDWIDTH_8_MHZ:
tda1004x_write_byte(i2c, tda_state, TDA1004X_DSSPARE2, 0x14);
- tda1004x_write_buf(i2c, tda_state, TDA1004X_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz));
+ tda1004x_write_buf(i2c, tda_state, TDA10045H_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz));
break;
default:
return -EINVAL;
}
- tda1004x_write_byte(i2c, tda_state, TDA1004X_IOFFSET, 0);
+ tda1004x_write_byte(i2c, tda_state, TDA10045H_IOFFSET, 0);
+
+ // done
+ return 0;
+}
+
+
+static int tda10046h_set_bandwidth(struct dvb_i2c_bus *i2c,
+ struct tda1004x_state *tda_state,
+ fe_bandwidth_t bandwidth)
+{
+ static u8 bandwidth_6mhz[] = { 0x80, 0x15, 0xfe, 0xab, 0x8e };
+ static u8 bandwidth_7mhz[] = { 0x6e, 0x02, 0x53, 0xc8, 0x25 };
+ static u8 bandwidth_8mhz[] = { 0x60, 0x12, 0xa8, 0xe4, 0xbd };
+
+ switch (bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ tda1004x_write_buf(i2c, tda_state, TDA10046H_TIME_WREF1, bandwidth_6mhz, sizeof(bandwidth_6mhz));
+ tda1004x_write_byte(i2c, tda_state, TDA1004X_DSSPARE2, 0);
+ break;
+
+ case BANDWIDTH_7_MHZ:
+ tda1004x_write_buf(i2c, tda_state, TDA10046H_TIME_WREF1, bandwidth_7mhz, sizeof(bandwidth_7mhz));
+ tda1004x_write_byte(i2c, tda_state, TDA1004X_DSSPARE2, 0);
+ break;
+
+ case BANDWIDTH_8_MHZ:
+ tda1004x_write_buf(i2c, tda_state, TDA10046H_TIME_WREF1, bandwidth_8mhz, sizeof(bandwidth_8mhz));
+ tda1004x_write_byte(i2c, tda_state, TDA1004X_DSSPARE2, 0xFF);
+ break;
+
+ default:
+ return -EINVAL;
+ }
// done
return 0;
}
-static int tda1004x_init(struct dvb_i2c_bus *i2c, struct tda1004x_state *tda_state)
+static int tda1004x_fwupload(struct dvb_i2c_bus *i2c, struct tda1004x_state *tda_state)
{
u8 fw_buf[65];
struct i2c_msg fw_msg = {.addr = 0,.flags = 0,.buf = fw_buf,.len = 0 };
- struct i2c_msg tuner_msg = {.addr = 0,.flags = 0,.buf = 0,.len = 0 };
unsigned char *firmware = NULL;
int filesize;
int fd;
int fwinfo_idx;
int fw_size = 0;
- int fw_pos;
+ int fw_pos, fw_offset;
int tx_size;
- static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
mm_segment_t fs = get_fs();
+ int dspCodeCounterReg=0, dspCodeInReg=0, dspVersion=0;
+ int fwInfoCount=0;
+ struct fwinfo* fwInfo = NULL;
+ unsigned long timeout;
+
+ // DSP parameters
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
+ dspCodeCounterReg = TDA10045H_FWPAGE;
+ dspCodeInReg = TDA10045H_CODE_IN;
+ dspVersion = 0x2c;
+ fwInfoCount = tda10045h_fwinfo_count;
+ fwInfo = tda10045h_fwinfo;
+ break;
- dprintk("%s\n", __FUNCTION__);
+ case FE_TYPE_TDA10046H:
+ dspCodeCounterReg = TDA10046H_CODE_CPT;
+ dspCodeInReg = TDA10046H_CODE_IN;
+ dspVersion = 0x20;
+ fwInfoCount = tda10046h_fwinfo_count;
+ fwInfo = tda10046h_fwinfo;
+ break;
+ }
// Load the firmware
set_fs(get_ds());
@@ -303,17 +413,18 @@ static int tda1004x_init(struct dvb_i2c_
return -EIO;
}
- // find extraction parameters
- for (fwinfo_idx = 0; fwinfo_idx < tda10045h_fwinfo_count; fwinfo_idx++) {
- if (tda10045h_fwinfo[fwinfo_idx].file_size == filesize)
+ // find extraction parameters for firmware
+ for (fwinfo_idx = 0; fwinfo_idx < fwInfoCount; fwinfo_idx++) {
+ if (fwInfo[fwinfo_idx].file_size == filesize)
break;
}
- if (fwinfo_idx >= tda10045h_fwinfo_count) {
+ if (fwinfo_idx >= fwInfoCount) {
printk("%s: Unsupported firmware %s\n", __FUNCTION__, tda1004x_firmware);
sys_close(fd);
return -EIO;
}
- fw_size = tda10045h_fwinfo[fwinfo_idx].fw_size;
+ fw_size = fwInfo[fwinfo_idx].fw_size;
+ fw_offset = fwInfo[fwinfo_idx].fw_offset;
// allocate buffer for it
firmware = vmalloc(fw_size);
@@ -325,7 +436,7 @@ static int tda1004x_init(struct dvb_i2c_
}
// read it!
- lseek(fd, tda10045h_fwinfo[fwinfo_idx].fw_offset, 0);
+ lseek(fd, fw_offset, 0);
if (read(fd, firmware, fw_size) != fw_size) {
printk("%s: Failed to read firmware\n", __FUNCTION__);
vfree(firmware);
@@ -335,39 +446,51 @@ static int tda1004x_init(struct dvb_i2c_
sys_close(fd);
set_fs(fs);
- // Disable the MC44BC374C
- tda1004x_enable_tuner_i2c(i2c, tda_state);
- tuner_msg.addr = MC44BC374_ADDRESS;
- tuner_msg.buf = disable_mc44BC374c;
- tuner_msg.len = sizeof(disable_mc44BC374c);
- if (i2c->xfer(i2c, &tuner_msg, 1) != 1) {
- i2c->xfer(i2c, &tuner_msg, 1);
- }
- tda1004x_disable_tuner_i2c(i2c, tda_state);
+ // set some valid bandwith parameters before uploading
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
+ // reset chip
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 8, 8);
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 8, 0);
+ dvb_delay(10);
- // set some valid bandwith parameters
- switch(tda_state->tda1004x_address) {
- case TDA10045H_ADDRESS:
+ // set parameters
tda10045h_set_bandwidth(i2c, tda_state, BANDWIDTH_8_MHZ);
break;
+
+ case FE_TYPE_TDA10046H:
+ // reset chip
+ tda1004x_write_mask(i2c, tda_state, TDA10046H_CONF_TRISTATE1, 1, 0);
+ dvb_delay(10);
+
+ // set parameters
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_CONFPLL2, 10);
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_CONFPLL3, 0);
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_FREQ_OFFSET, 99);
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_FREQ_PHY2_MSB, 0xd4);
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_FREQ_PHY2_LSB, 0x2c);
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
+ break;
}
- dvb_delay(500);
// do the firmware upload
- tda1004x_write_byte(i2c, tda_state, TDA1004X_FWPAGE, 0);
+ tda1004x_write_byte(i2c, tda_state, dspCodeCounterReg, 0); // clear code counter
fw_msg.addr = tda_state->tda1004x_address;
fw_pos = 0;
while (fw_pos != fw_size) {
+
// work out how much to send this time
tx_size = fw_size - fw_pos;
- if (tx_size > 64) {
- tx_size = 64;
+ if (tx_size > 0x10) {
+ tx_size = 0x10;
}
+
// send the chunk
- fw_buf[0] = TDA1004X_CODE_IN;
+ fw_buf[0] = dspCodeInReg;
memcpy(fw_buf + 1, firmware + fw_pos, tx_size);
fw_msg.len = tx_size + 1;
if (i2c->xfer(i2c, &fw_msg, 1) != 1) {
+ printk("tda1004x: Error during firmware upload\n");
vfree(firmware);
return -EIO;
}
@@ -375,35 +498,128 @@ static int tda1004x_init(struct dvb_i2c_
dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, fw_pos);
}
- dvb_delay(100);
vfree(firmware);
- // Initialise the DSP and check upload was OK
- tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 0x10, 0);
+ // wait for DSP to initialise
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
+ // DSPREADY doesn't seem to work on the TDA10045H
+ dvb_delay(100);
+ break;
+
+ case FE_TYPE_TDA10046H:
+ timeout = jiffies + HZ;
+ while(!(tda1004x_read_byte(i2c, tda_state, TDA1004X_STATUS_CD) & 0x20)) {
+ if (time_after(jiffies, timeout)) {
+ printk("tda1004x: DSP failed to initialised.\n");
+ return -EIO;
+ }
+
+ dvb_delay(1);
+ }
+ break;
+ }
+
+ // check upload was OK
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP
tda1004x_write_byte(i2c, tda_state, TDA1004X_DSP_CMD, 0x67);
if ((tda1004x_read_byte(i2c, tda_state, TDA1004X_DSP_DATA1) != 0x67) ||
- (tda1004x_read_byte(i2c, tda_state, TDA1004X_DSP_DATA2) != 0x2c)) {
+ (tda1004x_read_byte(i2c, tda_state, TDA1004X_DSP_DATA2) != dspVersion)) {
printk("%s: firmware upload failed!\n", __FUNCTION__);
return -EIO;
}
+ // success
+ return 0;
+}
+
+
+static int tda10045h_init(struct dvb_i2c_bus *i2c, struct tda1004x_state *tda_state)
+{
+ struct i2c_msg tuner_msg = {.addr = 0,.flags = 0,.buf = 0,.len = 0 };
+ static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
+
+ dprintk("%s\n", __FUNCTION__);
+
+ // Disable the MC44BC374C
+ tda1004x_enable_tuner_i2c(i2c, tda_state);
+ tuner_msg.addr = MC44BC374_ADDRESS;
+ tuner_msg.buf = disable_mc44BC374c;
+ tuner_msg.len = sizeof(disable_mc44BC374c);
+ if (i2c->xfer(i2c, &tuner_msg, 1) != 1) {
+ i2c->xfer(i2c, &tuner_msg, 1);
+ }
+ tda1004x_disable_tuner_i2c(i2c, tda_state);
+
// tda setup
- tda1004x_write_mask(i2c, tda_state, TDA1004X_AUTO, 8, 0);
- tda1004x_write_mask(i2c, tda_state, TDA1004X_AUTO, 0x10, 0x10);
- tda1004x_write_mask(i2c, tda_state, TDA1004X_IN_CONF2, 0xC0, 0x0);
- tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 0x20, 0);
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_AUTO, 8, 0); // select HP stream
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x40, 0); // no frequency inversion
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x80, 0x80); // enable pulse killer
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_AUTO, 0x10, 0x10); // enable auto offset
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_IN_CONF2, 0xC0, 0x0); // no frequency offset
+ tda1004x_write_byte(i2c, tda_state, TDA1004X_CONF_TS1, 0); // setup MPEG2 TS interface
+ tda1004x_write_byte(i2c, tda_state, TDA1004X_CONF_TS2, 0); // setup MPEG2 TS interface
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_VBER_MSB, 0xe0, 0xa0); // 10^6 VBER measurement bits
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x10, 0); // VAGC polarity
tda1004x_write_byte(i2c, tda_state, TDA1004X_CONFADC1, 0x2e);
- tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x80, 0x80);
- tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x40, 0);
- tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x10, 0);
- tda1004x_write_byte(i2c, tda_state, TDA1004X_REG1E, 0);
- tda1004x_write_byte(i2c, tda_state, TDA1004X_REG1F, 0);
- tda1004x_write_mask(i2c, tda_state, TDA1004X_VBER_MSB, 0xe0, 0xa0);
// done
return 0;
}
+
+
+static int tda10046h_init(struct dvb_i2c_bus *i2c, struct tda1004x_state *tda_state)
+{
+ struct i2c_msg tuner_msg = {.addr = 0,.flags = 0,.buf = 0,.len = 0 };
+ static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
+
+ dprintk("%s\n", __FUNCTION__);
+
+ // Disable the MC44BC374C
+ tda1004x_enable_tuner_i2c(i2c, tda_state);
+ tuner_msg.addr = MC44BC374_ADDRESS;
+ tuner_msg.buf = disable_mc44BC374c;
+ tuner_msg.len = sizeof(disable_mc44BC374c);
+ if (i2c->xfer(i2c, &tuner_msg, 1) != 1) {
+ i2c->xfer(i2c, &tuner_msg, 1);
+ }
+ tda1004x_disable_tuner_i2c(i2c, tda_state);
+
+ // tda setup
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x40, 0x40); // TT TDA10046H needs inversion ON
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_AUTO, 8, 0); // select HP stream
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x80, 0); // disable pulse killer
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_CONFPLL2, 10); // PLL M = 10
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_FREQ_OFFSET, 99); // FREQOFFS = 99
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_FREQ_PHY2_MSB, 0xd4); // } PHY2 = -11221
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_FREQ_PHY2_LSB, 0x2c); // }
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_AGC_CONF, 0); // AGC setup
+ tda1004x_write_mask(i2c, tda_state, TDA10046H_CONF_POLARITY, 0x60, 0x60); // set AGC polarities
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_AGC_TUN_MIN, 0); // }
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_AGC_IF_MIN, 0); // }
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_AGC_IF_MAX, 0xff); // }
+ tda1004x_write_mask(i2c, tda_state, TDA10046H_CVBER_CTRL, 0x30, 0x10); // 10^6 VBER measurement bits
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_AGC_GAINS, 1); // IF gain 2, TUN gain 1
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_AUTO, 0x80, 0); // crystal is 50ppm
+ tda1004x_write_byte(i2c, tda_state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_CONF_TS2, 0x31, 0); // MPEG2 interface config
+ tda1004x_write_mask(i2c, tda_state, TDA10046H_CONF_TRISTATE1, 0x9e, 0); // disable AGC_TUN
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_CONF_TRISTATE2, 0xe1); // tristate setup
+ tda1004x_write_byte(i2c, tda_state, TDA10046H_GPIO_OUT_SEL, 0xcc); // GPIO output config
+ tda1004x_write_mask(i2c, tda_state, TDA10046H_GPIO_SELECT, 8, 8); // GPIO select
+ tda10046h_set_bandwidth(i2c, tda_state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz
+
+ // done
+ return 0;
+}
+
+
+
static int tda1004x_encode_fec(int fec)
{
// convert known FEC values
@@ -450,17 +666,18 @@ static int tda1004x_set_frequency(struct
{
u8 tuner_buf[4];
struct i2c_msg tuner_msg = {.addr=0, .flags=0, .buf=tuner_buf, .len=sizeof(tuner_buf) };
- int tuner_frequency;
+ int tuner_frequency = 0;
u8 band, cp, filter;
int counter, counter2;
dprintk("%s\n", __FUNCTION__);
// setup the frequency buffer
- switch (tda_state->tuner_address) {
- case TD1344_ADDRESS:
+ switch (tda_state->tuner_type) {
+ case TUNER_TYPE_TD1344:
// setup tuner buffer
+ // ((Fif+((1000000/6)/2)) + Finput)/(1000000/6)
tuner_frequency =
(((fe_params->frequency / 1000) * 6) + 217502) / 1000;
tuner_buf[0] = tuner_frequency >> 8;
@@ -499,7 +716,7 @@ static int tda1004x_set_frequency(struct
tda1004x_disable_tuner_i2c(i2c, tda_state);
break;
- case TDM1316L_ADDRESS:
+ case TUNER_TYPE_TD1316:
// determine charge pump
tuner_frequency = fe_params->frequency + 36130000;
if (tuner_frequency < 87000000) {
@@ -542,9 +759,7 @@ static int tda1004x_set_frequency(struct
// work out filter
switch (fe_params->u.ofdm.bandwidth) {
case BANDWIDTH_6_MHZ:
- // 6 MHz isn't supported directly, but set this to
- // the 8 MHz setting in case we can fiddle it later
- filter = 1;
+ filter = 0;
break;
case BANDWIDTH_7_MHZ:
@@ -559,15 +774,27 @@ static int tda1004x_set_frequency(struct
return -EINVAL;
}
- // calculate tuner parameters
+ // calculate divisor
+ // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6)
tuner_frequency =
(((fe_params->frequency / 1000) * 6) + 217280) / 1000;
+
+ // setup tuner buffer
tuner_buf[0] = tuner_frequency >> 8;
tuner_buf[1] = tuner_frequency & 0xff;
tuner_buf[2] = 0xca;
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
// tune it
+ if (tda_state->fe_type == FE_TYPE_TDA10046H) {
+ // setup auto offset
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_AUTO, 0x10, 0x10);
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_IN_CONF1, 0x80, 0);
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_IN_CONF2, 0xC0, 0);
+
+ // disable agc_conf[2]
+ tda1004x_write_mask(i2c, tda_state, TDA10046H_AGC_CONF, 4, 0);
+ }
tda1004x_enable_tuner_i2c(i2c, tda_state);
tuner_msg.addr = tda_state->tuner_address;
tuner_msg.len = 4;
@@ -576,6 +803,8 @@ static int tda1004x_set_frequency(struct
}
dvb_delay(1);
tda1004x_disable_tuner_i2c(i2c, tda_state);
+ if (tda_state->fe_type == FE_TYPE_TDA10046H)
+ tda1004x_write_mask(i2c, tda_state, TDA10046H_AGC_CONF, 4, 4);
break;
default:
@@ -593,13 +822,12 @@ static int tda1004x_set_fe(struct dvb_i2
struct dvb_frontend_parameters *fe_params)
{
int tmp;
+ int inversion;
dprintk("%s\n", __FUNCTION__);
-
// set frequency
- tmp = tda1004x_set_frequency(i2c, tda_state, fe_params);
- if (tmp < 0)
+ if ((tmp = tda1004x_set_frequency(i2c, tda_state, fe_params)) < 0)
return tmp;
// hardcoded to use auto as much as possible
@@ -673,14 +901,24 @@ static int tda1004x_set_fe(struct dvb_i2
}
// set bandwidth
- switch(tda_state->tda1004x_address) {
- case TDA10045H_ADDRESS:
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
tda10045h_set_bandwidth(i2c, tda_state, fe_params->u.ofdm.bandwidth);
break;
+
+ case FE_TYPE_TDA10046H:
+ tda10046h_set_bandwidth(i2c, tda_state, fe_params->u.ofdm.bandwidth);
+ break;
+ }
+
+ // need to invert the inversion for TT TDA10046H
+ inversion = fe_params->inversion;
+ if (tda_state->fe_type == FE_TYPE_TDA10046H) {
+ inversion = inversion ? INVERSION_OFF : INVERSION_ON;
}
// set inversion
- switch (fe_params->inversion) {
+ switch (inversion) {
case INVERSION_OFF:
tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC1, 0x20, 0);
break;
@@ -745,10 +983,19 @@ static int tda1004x_set_fe(struct dvb_i2
return -EINVAL;
}
- // reset DSP
+ // start the lock
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 8, 8);
tda1004x_write_mask(i2c, tda_state, TDA1004X_CONFC4, 8, 0);
dvb_delay(10);
+ break;
+
+ case FE_TYPE_TDA10046H:
+ tda1004x_write_mask(i2c, tda_state, TDA1004X_AUTO, 0x40, 0x40);
+ dvb_delay(10);
+ break;
+ }
// done
return 0;
@@ -766,8 +1013,15 @@ static int tda1004x_get_fe(struct dvb_i2
fe_params->inversion = INVERSION_ON;
}
+ // need to invert the inversion for TT TDA10046H
+ if (tda_state->fe_type == FE_TYPE_TDA10046H) {
+ fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
+ }
+
// bandwidth
- switch (tda1004x_read_byte(i2c, tda_state, TDA1004X_WREF_LSB)) {
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
+ switch (tda1004x_read_byte(i2c, tda_state, TDA10045H_WREF_LSB)) {
case 0x14:
fe_params->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
break;
@@ -778,6 +1032,22 @@ static int tda1004x_get_fe(struct dvb_i2
fe_params->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
break;
}
+ break;
+
+ case FE_TYPE_TDA10046H:
+ switch (tda1004x_read_byte(i2c, tda_state, TDA10046H_TIME_WREF1)) {
+ case 0x60:
+ fe_params->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
+ break;
+ case 0x6e:
+ fe_params->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
+ break;
+ case 0x80:
+ fe_params->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
+ break;
+ }
+ break;
+ }
// FEC
fe_params->u.ofdm.code_rate_HP =
@@ -906,11 +1176,23 @@ static int tda1004x_read_status(struct d
static int tda1004x_read_signal_strength(struct dvb_i2c_bus *i2c, struct tda1004x_state* tda_state, u16 * signal)
{
int tmp;
+ int reg = 0;
dprintk("%s\n", __FUNCTION__);
+ // determine the register to use
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
+ reg = TDA10045H_S_AGC;
+ break;
+
+ case FE_TYPE_TDA10046H:
+ reg = TDA10046H_AGC_IF_LEVEL;
+ break;
+ }
+
// read it
- tmp = tda1004x_read_byte(i2c, tda_state, TDA1004X_SIGNAL_STRENGTH);
+ tmp = tda1004x_read_byte(i2c, tda_state, reg);
if (tmp < 0)
return -EIO;
@@ -1009,10 +1291,14 @@ static int tda1004x_ioctl(struct dvb_fro
switch (cmd) {
case FE_GET_INFO:
- switch(tda_state->tda1004x_address) {
- case TDA10045H_ADDRESS:
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
memcpy(arg, &tda10045h_info, sizeof(struct dvb_frontend_info));
break;
+
+ case FE_TYPE_TDA10046H:
+ memcpy(arg, &tda10046h_info, sizeof(struct dvb_frontend_info));
+ break;
}
break;
@@ -1043,7 +1329,15 @@ static int tda1004x_ioctl(struct dvb_fro
return 0;
// OK, perform initialisation
- status = tda1004x_init(i2c, tda_state);
+ switch(tda_state->fe_type) {
+ case FE_TYPE_TDA10045H:
+ status = tda10045h_init(i2c, tda_state);
+ break;
+
+ case FE_TYPE_TDA10046H:
+ status = tda10046h_init(i2c, tda_state);
+ break;
+ }
if (status == 0)
tda_state->initialised = 1;
return status;
@@ -1060,42 +1354,81 @@ static int tda1004x_attach(struct dvb_i2
{
int tda1004x_address = -1;
int tuner_address = -1;
+ int fe_type = -1;
+ int tuner_type = -1;
struct tda1004x_state tda_state;
struct i2c_msg tuner_msg = {.addr=0, .flags=0, .buf=0, .len=0 };
static u8 td1344_init[] = { 0x0b, 0xf5, 0x88, 0xab };
- static u8 tdm1316l_init[] = { 0x0b, 0xf5, 0x85, 0xab };
+ static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab };
+ static u8 td1316_init_tda10046h[] = { 0x0b, 0xf5, 0x80, 0xab };
+ int status;
dprintk("%s\n", __FUNCTION__);
- // probe for frontend
- tda_state.tda1004x_address = TDA10045H_ADDRESS;
+ // probe for tda10045h
+ if (tda1004x_address == -1) {
+ tda_state.tda1004x_address = 0x08;
if (tda1004x_read_byte(i2c, &tda_state, TDA1004X_CHIPID) == 0x25) {
- tda1004x_address = TDA10045H_ADDRESS;
+ tda1004x_address = 0x08;
+ fe_type = FE_TYPE_TDA10045H;
printk("tda1004x: Detected Philips TDA10045H.\n");
}
+ }
+
+ // probe for tda10046h
+ if (tda1004x_address == -1) {
+ tda_state.tda1004x_address = 0x08;
+ if (tda1004x_read_byte(i2c, &tda_state, TDA1004X_CHIPID) == 0x46) {
+ tda1004x_address = 0x08;
+ fe_type = FE_TYPE_TDA10046H;
+ printk("tda1004x: Detected Philips TDA10046H.\n");
+ }
+ }
// did we find a frontend?
if (tda1004x_address == -1) {
return -ENODEV;
}
- // supported tuner?
+ // enable access to the tuner
tda1004x_enable_tuner_i2c(i2c, &tda_state);
- tuner_msg.addr = TD1344_ADDRESS;
+
+ // check for a TD1344 first
+ if (tuner_address == -1) {
+ tuner_msg.addr = 0x61;
tuner_msg.buf = td1344_init;
tuner_msg.len = sizeof(td1344_init);
if (i2c->xfer(i2c, &tuner_msg, 1) == 1) {
dvb_delay(1);
- tuner_address = TD1344_ADDRESS;
- printk("tda1004x: Detected Philips TD1344 tuner. PLEASE CHECK THIS AND REPORT BACK!.\n");
- } else {
- tuner_msg.addr = TDM1316L_ADDRESS;
- tuner_msg.buf = tdm1316l_init;
- tuner_msg.len = sizeof(tdm1316l_init);
+ tuner_address = 0x61;
+ tuner_type = TUNER_TYPE_TD1344;
+ printk("tda1004x: Detected Philips TD1344 tuner.\n");
+ }
+ }
+
+ // OK, try a TD1316 on address 0x63
+ if (tuner_address == -1) {
+ tuner_msg.addr = 0x63;
+ tuner_msg.buf = td1316_init;
+ tuner_msg.len = sizeof(td1316_init);
if (i2c->xfer(i2c, &tuner_msg, 1) == 1) {
dvb_delay(1);
- tuner_address = TDM1316L_ADDRESS;
- printk("tda1004x: Detected Philips TDM1316L tuner.\n");
+ tuner_address = 0x63;
+ tuner_type = TUNER_TYPE_TD1316;
+ printk("tda1004x: Detected Philips TD1316 tuner.\n");
+ }
+ }
+
+ // OK, TD1316 again, on address 0x60 (TDA10046H)
+ if (tuner_address == -1) {
+ tuner_msg.addr = 0x60;
+ tuner_msg.buf = td1316_init_tda10046h;
+ tuner_msg.len = sizeof(td1316_init_tda10046h);
+ if (i2c->xfer(i2c, &tuner_msg, 1) == 1) {
+ dvb_delay(1);
+ tuner_address = 0x60;
+ tuner_type = TUNER_TYPE_TD1316;
+ printk("tda1004x: Detected Philips TD1316 tuner.\n");
}
}
tda1004x_disable_tuner_i2c(i2c, &tda_state);
@@ -1108,16 +1441,25 @@ static int tda1004x_attach(struct dvb_i2
// create state
tda_state.tda1004x_address = tda1004x_address;
+ tda_state.fe_type = fe_type;
tda_state.tuner_address = tuner_address;
+ tda_state.tuner_type = tuner_type;
tda_state.initialised = 0;
+ // upload firmware
+ if ((status = tda1004x_fwupload(i2c, &tda_state)) != 0) return status;
+
// register
- switch(tda_state.tda1004x_address) {
- case TDA10045H_ADDRESS:
+ switch(tda_state.fe_type) {
+ case FE_TYPE_TDA10045H:
return dvb_register_frontend(tda1004x_ioctl, i2c, (void *)(*((u32*) &tda_state)), &tda10045h_info);
- default:
- return -ENODEV;
+
+ case FE_TYPE_TDA10046H:
+ return dvb_register_frontend(tda1004x_ioctl, i2c, (void *)(*((u32*) &tda_state)), &tda10046h_info);
}
+
+ // should not get here
+ return -EINVAL;
}
@@ -1146,7 +1488,7 @@ void __exit exit_tda1004x(void)
module_init(init_tda1004x);
module_exit(exit_tda1004x);
-MODULE_DESCRIPTION("Philips TDA10045H DVB-T Frontend");
+MODULE_DESCRIPTION("Philips TDA10045H & TDA10046H DVB-T Frontend");
MODULE_AUTHOR("Andrew de Quincey & Robert Schlabbach");
MODULE_LICENSE("GPL");
_