From: Patrick Boettcher Add preliminary support for the Medion Hybrid USB2.0 DVB-T/Analogue box. Analogue part is not working yet (cx25842 --> ivtv?). Signed-off-by: Patrick Boettcher Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton --- drivers/media/dvb/dvb-usb/Kconfig | 16 + drivers/media/dvb/dvb-usb/Makefile | 3 drivers/media/dvb/dvb-usb/cxusb.c | 287 ++++++++++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/cxusb.h | 30 +++ drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 5 files changed, 338 insertions(+) diff -puN /dev/null drivers/media/dvb/dvb-usb/cxusb.c --- /dev/null Thu Apr 11 07:25:15 2002 +++ 25-akpm/drivers/media/dvb/dvb-usb/cxusb.c Mon Jun 27 15:37:00 2005 @@ -0,0 +1,287 @@ +/* DVB USB compliant linux driver for Conexant USB reference design. + * + * The Conexant reference design I saw on their website was only for analogue + * capturing (using the cx25842). The box I took to write this driver (reverse + * engineered) is the one labeled Medion MD95700. In addition to the cx25842 + * for analogue capturing it also has a cx22702 DVB-T demodulator on the main + * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard. + * + * Maybe it is a little bit premature to call this driver cxusb, but I assume + * the USB protocol is identical or at least inherited from the reference + * design, so it can be reused for the "analogue-only" device (if it will + * appear at all). + * + * TODO: check if the cx25840-driver (from ivtv) can be used for the analogue + * part + * + * FIXME: We're getting a lock and signal, but the isochronous transfer is empty + * for DVB-T. + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "cxusb.h" + +#include "cx22702.h" + +/* debug */ +int dvb_usb_cxusb_debug; +module_param_named(debug,dvb_usb_cxusb_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +static int cxusb_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 sndbuf[1+wlen]; + memset(sndbuf,0,1+wlen); + + sndbuf[0] = cmd; + memcpy(&sndbuf[1],wbuf,wlen); + if (wo) + dvb_usb_generic_write(d,sndbuf,1+wlen); + else + dvb_usb_generic_rw(d,sndbuf,1+wlen,rbuf,rlen,0); + + return 0; +} + +/* I2C */ +static void cxusb_set_i2c_path(struct dvb_usb_device *d, enum cxusb_i2c_pathes path) +{ + struct cxusb_state *st = d->priv; + u8 o[2],i; + + if (path == st->cur_i2c_path) + return; + + o[0] = IOCTL_SET_I2C_PATH; + switch (path) { + case PATH_CX22702: + o[1] = 0; + break; + case PATH_TUNER_OTHER: + o[1] = 1; + break; + default: + err("unkown i2c path"); + return; + } + cxusb_ctrl_msg(d,CMD_IOCTL,o,2,&i,1); + + if (i != 0x01) + deb_info("i2c_path setting failed.\n"); + + st->cur_i2c_path = path; +} + +static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (down_interruptible(&d->i2c_sem) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + + switch (msg[i].addr) { + case 0x63: + cxusb_set_i2c_path(d,PATH_CX22702); + break; + default: + cxusb_set_i2c_path(d,PATH_TUNER_OTHER); + break; + } + + /* read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len]; + obuf[0] = msg[i].len; + obuf[1] = msg[i+1].len; + obuf[2] = msg[i].addr; + memcpy(&obuf[3],msg[i].buf,msg[i].len); + + if (cxusb_ctrl_msg(d, CMD_I2C_READ, + obuf, 3+msg[i].len, + ibuf, 1+msg[i+1].len) < 0) + break; + + if (ibuf[0] != 0x08) + deb_info("i2c read could have been failed\n"); + + memcpy(msg[i+1].buf,&ibuf[1],msg[i+1].len); + + i++; + } else { /* write */ + u8 obuf[2+msg[i].len], ibuf; + obuf[0] = msg[i].addr; + obuf[1] = msg[i].len; + memcpy(&obuf[2],msg[i].buf,msg[i].len); + + if (cxusb_ctrl_msg(d,CMD_I2C_WRITE, obuf, 2+msg[i].len, &ibuf,1) < 0) + break; + if (ibuf != 0x08) + deb_info("i2c write could have been failed\n"); + } + } + + up(&d->i2c_sem); + return i; +} + +static u32 cxusb_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm cxusb_i2c_algo = { + .name = "Conexant USB I2C algorithm", + .id = I2C_ALGO_BIT, + .master_xfer = cxusb_i2c_xfer, + .functionality = cxusb_i2c_func, +}; + +static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + return 0; +} + +static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + return 0; +} + +struct cx22702_config cxusb_cx22702_config = { + .demod_address = 0x63, + + .pll_init = dvb_usb_pll_init_i2c, + .pll_set = dvb_usb_pll_set_i2c, +}; + +/* Callbacks for DVB USB */ +static int cxusb_tuner_attach(struct dvb_usb_device *d) +{ + u8 bpll[4] = { 0x0b, 0xdc, 0x9c, 0xa0 }; + d->pll_addr = 0x61; + memcpy(d->pll_init,bpll,4); + d->pll_desc = &dvb_pll_fmd1216me; + return 0; +} + +static int cxusb_frontend_attach(struct dvb_usb_device *d) +{ + u8 buf[2] = { 0x03, 0x00 }; + u8 b = 0; + + cxusb_ctrl_msg(d,0xde,&b,0,NULL,0); + cxusb_set_i2c_path(d,PATH_TUNER_OTHER); + cxusb_ctrl_msg(d,CMD_POWER_OFF, NULL, 0, &b, 1); + + if (usb_set_interface(d->udev,0,6) < 0) + err("set interface failed\n"); + + cxusb_ctrl_msg(d,0x36, buf, 2, NULL, 0); + cxusb_set_i2c_path(d,PATH_CX22702); + cxusb_ctrl_msg(d,CMD_POWER_ON, NULL, 0, &b, 1); + + if ((d->fe = cx22702_attach(&cxusb_cx22702_config, &d->i2c_adap)) != NULL) + return 0; + + return -EIO; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_properties cxusb_properties; + +static int cxusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&cxusb_properties,THIS_MODULE); +} + +static struct usb_device_id cxusb_table [] = { + { USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, cxusb_table); + +static struct dvb_usb_properties cxusb_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .streaming_ctrl = cxusb_streaming_ctrl, + .power_ctrl = cxusb_power_ctrl, + .frontend_attach = cxusb_frontend_attach, + .tuner_attach = cxusb_tuner_attach, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 64, + .framesize = 940*3, + .interval = 1, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Medion MD95700 (MDUSBTV-HYBRID)", + { NULL }, + { &cxusb_table[0], NULL }, + }, + } +}; + +static struct usb_driver cxusb_driver = { + .owner = THIS_MODULE, + .name = "cxusb", + .probe = cxusb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = cxusb_table, +}; + +/* module stuff */ +static int __init cxusb_module_init(void) +{ + int result; + if ((result = usb_register(&cxusb_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit cxusb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&cxusb_driver); +} + +module_init (cxusb_module_init); +module_exit (cxusb_module_exit); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design"); +MODULE_VERSION("1.0-alpha"); +MODULE_LICENSE("GPL"); diff -puN /dev/null drivers/media/dvb/dvb-usb/cxusb.h --- /dev/null Thu Apr 11 07:25:15 2002 +++ 25-akpm/drivers/media/dvb/dvb-usb/cxusb.h Mon Jun 27 15:37:00 2005 @@ -0,0 +1,30 @@ +#ifndef _DVB_USB_CXUSB_H_ +#define _DVB_USB_CXUSB_H_ + +#define DVB_USB_LOG_PREFIX "digitv" +#include "dvb-usb.h" + +extern int dvb_usb_cxusb_debug; +#define deb_info(args...) dprintk(dvb_usb_cxusb_debug,0x01,args) + +/* usb commands - some of it are guesses, don't have a reference yet */ +#define CMD_I2C_WRITE 0x08 +#define CMD_I2C_READ 0x09 + +#define CMD_IOCTL 0x0e +#define IOCTL_SET_I2C_PATH 0x02 + +#define CMD_POWER_OFF 0x50 +#define CMD_POWER_ON 0x51 + +enum cxusb_i2c_pathes { + PATH_UNDEF = 0x00, + PATH_CX22702 = 0x01, + PATH_TUNER_OTHER = 0x02, +}; + +struct cxusb_state { + enum cxusb_i2c_pathes cur_i2c_path; +}; + +#endif diff -puN drivers/media/dvb/dvb-usb/dvb-usb-ids.h~dvb-usb-support-medion-hybrid-usb20-dvb-t-analogue-box drivers/media/dvb/dvb-usb/dvb-usb-ids.h --- 25/drivers/media/dvb/dvb-usb/dvb-usb-ids.h~dvb-usb-support-medion-hybrid-usb20-dvb-t-analogue-box Mon Jun 27 15:37:00 2005 +++ 25-akpm/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Mon Jun 27 15:37:00 2005 @@ -24,6 +24,7 @@ #define USB_VID_HANFTEK 0x15f4 #define USB_VID_HAUPPAUGE 0x2040 #define USB_VID_HYPER_PALTEK 0x1025 +#define USB_VID_MEDION 0x1660 #define USB_VID_VISIONPLUS 0x13d3 #define USB_VID_TWINHAN 0x1822 #define USB_VID_ULTIMA_ELECTRONIC 0x05d8 @@ -78,6 +79,7 @@ #define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820 #define USB_PID_DVICO_BLUEBIRD_LGZ201_1 0xdb01 #define USB_PID_DVICO_BLUEBIRD_TH7579_2 0xdb11 +#define USB_PID_MEDION_MD95700 0x0932 #endif diff -puN drivers/media/dvb/dvb-usb/Kconfig~dvb-usb-support-medion-hybrid-usb20-dvb-t-analogue-box drivers/media/dvb/dvb-usb/Kconfig --- 25/drivers/media/dvb/dvb-usb/Kconfig~dvb-usb-support-medion-hybrid-usb20-dvb-t-analogue-box Mon Jun 27 15:37:00 2005 +++ 25-akpm/drivers/media/dvb/dvb-usb/Kconfig Mon Jun 27 15:37:00 2005 @@ -21,12 +21,14 @@ config DVB_USB_DEBUG config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB + select DVB_DIB3000MC help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. config DVB_USB_DIBUSB_MB tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" depends on DVB_USB + select DVB_DIB3000MB help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-B demodulator. @@ -52,6 +54,7 @@ config DVB_USB_DIBUSB_MB config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB + select DVB_DIB3000MC help Support for 2.0 DVB-T receivers based on reference designs made by DiBcom () equipped with a DiB3000M-C/P demodulator. @@ -66,12 +69,24 @@ config DVB_USB_DIBUSB_MC config DVB_USB_UMT_010 tristate "HanfTek UMT-010 DVB-T USB2.0 support" depends on DVB_USB + select DVB_DIB3000MC help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. +config DVB_USB_CXUSB + tristate "Medion MD95700 hybrid USB2.0 (Conexant) support" + depends on DVB_USB + select DVB_CX22702 + help + Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently + only the DVB-T part is supported and MPEG2 data transfer are not working + :(. + config DVB_USB_DIGITV tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" depends on DVB_USB + select DVB_NXT6000 + select DVB_MT352 help Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. @@ -87,6 +102,7 @@ config DVB_USB_VP7045 config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB + select DVB_DIB3000MC help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. diff -puN drivers/media/dvb/dvb-usb/Makefile~dvb-usb-support-medion-hybrid-usb20-dvb-t-analogue-box drivers/media/dvb/dvb-usb/Makefile --- 25/drivers/media/dvb/dvb-usb/Makefile~dvb-usb-support-medion-hybrid-usb20-dvb-t-analogue-box Mon Jun 27 15:37:00 2005 +++ 25-akpm/drivers/media/dvb/dvb-usb/Makefile Mon Jun 27 15:37:00 2005 @@ -27,4 +27,7 @@ obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb dvb-usb-digitv-objs = digitv.o obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o +dvb-usb-cxusb-objs = cxusb.o +obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o + EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ _