From: Patrick Boettcher Add support and rewrote some parts with the help of vendor information (Thanks to Steve Chang from WideView, Inc.): o added support for the WT-220U (Pensize DVB-T receiver) o corrected byte order for unc,ber and the pid filter o corrected number of pids that can be fetched at the same time. o added some comments in Kconfig-file o added USB IDs for the WT-220U Signed-off-by: Patrick Boettcher Signed-off-by: Johannes Stezenbach Cc: Greg KH Signed-off-by: Andrew Morton --- drivers/media/dvb/dvb-usb/Kconfig | 4 + drivers/media/dvb/dvb-usb/dtt200u-fe.c | 72 +++++++++++++------------- drivers/media/dvb/dvb-usb/dtt200u.c | 86 +++++++++++++++++++++++++++----- drivers/media/dvb/dvb-usb/dtt200u.h | 38 +++++--------- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 3 - 5 files changed, 130 insertions(+), 73 deletions(-) diff -puN drivers/media/dvb/dvb-usb/dtt200u.c~dvb-usb-add-supprt-for-wideview-wt-220u drivers/media/dvb/dvb-usb/dtt200u.c --- devel/drivers/media/dvb/dvb-usb/dtt200u.c~dvb-usb-add-supprt-for-wideview-wt-220u 2005-07-01 21:14:23.000000000 -0700 +++ devel-akpm/drivers/media/dvb/dvb-usb/dtt200u.c 2005-07-01 21:14:23.000000000 -0700 @@ -3,6 +3,8 @@ * * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) * + * Thanks to Steve Chang from WideView for providing support for the WT-220U. + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. @@ -16,14 +18,24 @@ int dvb_usb_dtt200u_debug; module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); +static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b = SET_INIT; + + if (onoff) + dvb_usb_generic_write(d,&b,2); + + return 0; +} + static int dtt200u_streaming_ctrl(struct dvb_usb_device *d, int onoff) { - u8 b_streaming[2] = { SET_TS_CTRL, onoff }; + u8 b_streaming[2] = { SET_STREAMING, onoff }; u8 b_rst_pid = RESET_PID_FILTER; dvb_usb_generic_write(d,b_streaming,2); - if (!onoff) + if (onoff == 0) dvb_usb_generic_write(d,&b_rst_pid,1); return 0; } @@ -36,7 +48,7 @@ static int dtt200u_pid_filter(struct dvb b_pid[0] = SET_PID_FILTER; b_pid[1] = index; b_pid[2] = pid & 0xff; - b_pid[3] = (pid >> 8) & 0xff; + b_pid[3] = (pid >> 8) & 0x1f; return dvb_usb_generic_write(d,b_pid,4); } @@ -54,9 +66,9 @@ static struct dvb_usb_rc_key dtt200u_rc_ { 0x80, 0x08, KEY_5 }, { 0x80, 0x09, KEY_6 }, { 0x80, 0x0a, KEY_7 }, - { 0x00, 0x0c, KEY_ZOOM }, + { 0x80, 0x0c, KEY_ZOOM }, { 0x80, 0x0d, KEY_0 }, - { 0x00, 0x0e, KEY_SELECT }, + { 0x80, 0x0e, KEY_SELECT }, { 0x80, 0x12, KEY_POWER }, { 0x80, 0x1a, KEY_CHANNELUP }, { 0x80, 0x1b, KEY_8 }, @@ -66,7 +78,7 @@ static struct dvb_usb_rc_key dtt200u_rc_ static int dtt200u_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - u8 key[5],cmd = GET_RC_KEY; + u8 key[5],cmd = GET_RC_CODE; dvb_usb_generic_rw(d,&cmd,1,key,5,0); dvb_usb_nec_rc_key_to_event(d,key,event,state); if (key[0] != 0) @@ -81,32 +93,41 @@ static int dtt200u_frontend_attach(struc } static struct dvb_usb_properties dtt200u_properties; +static struct dvb_usb_properties wt220u_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE); + if (dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE) == 0 || + dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE) == 0) + return 0; + + return -ENODEV; } static struct usb_device_id dtt200u_usb_table [] = { +// { USB_DEVICE(0x04b4,0x8613) }, { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_COLD) }, { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_WARM) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_COLD) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_WARM) }, { 0 }, }; MODULE_DEVICE_TABLE(usb, dtt200u_usb_table); static struct dvb_usb_properties dtt200u_properties = { .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING, - .pid_filter_count = 255, /* It is a guess, but there are at least 10 */ + .pid_filter_count = 15, .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-dtt200u-01.fw", + .power_ctrl = dtt200u_power_ctrl, .streaming_ctrl = dtt200u_streaming_ctrl, .pid_filter = dtt200u_pid_filter, .frontend_attach = dtt200u_frontend_attach, - .rc_interval = 200, + .rc_interval = 300, .rc_key_map = dtt200u_rc_keys, .rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys), .rc_query = dtt200u_rc_query, @@ -127,7 +148,7 @@ static struct dvb_usb_properties dtt200u .num_device_descs = 1, .devices = { - { .name = "WideView/Yakumo/Hama/Typhoon DVB-T USB2.0)", + { .name = "WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)", .cold_ids = { &dtt200u_usb_table[0], NULL }, .warm_ids = { &dtt200u_usb_table[1], NULL }, }, @@ -135,10 +156,51 @@ static struct dvb_usb_properties dtt200u } }; +static struct dvb_usb_properties wt220u_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING, + .pid_filter_count = 15, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-wt220u-01.fw", + + .power_ctrl = dtt200u_power_ctrl, + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + + .rc_interval = 300, + .rc_key_map = dtt200u_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys), + .rc_query = dtt200u_rc_query, + + .generic_bulk_ctrl_endpoint = 0x01, + + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { .name = "WideView WT-220U PenType Receiver (and clones)", + .cold_ids = { &dtt200u_usb_table[2], NULL }, + .warm_ids = { &dtt200u_usb_table[3], NULL }, + }, + { 0 }, + } +}; + /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver dtt200u_usb_driver = { .owner = THIS_MODULE, - .name = "dtt200u", + .name = "dvb_usb_dtt200u", .probe = dtt200u_usb_probe, .disconnect = dvb_usb_device_exit, .id_table = dtt200u_usb_table, @@ -166,6 +228,6 @@ module_init(dtt200u_usb_module_init); module_exit(dtt200u_usb_module_exit); MODULE_AUTHOR("Patrick Boettcher "); -MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon DVB-T USB2.0 device"); +MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon DVB-T USB2.0 devices"); MODULE_VERSION("1.0"); MODULE_LICENSE("GPL"); diff -puN drivers/media/dvb/dvb-usb/dtt200u-fe.c~dvb-usb-add-supprt-for-wideview-wt-220u drivers/media/dvb/dvb-usb/dtt200u-fe.c --- devel/drivers/media/dvb/dvb-usb/dtt200u-fe.c~dvb-usb-add-supprt-for-wideview-wt-220u 2005-07-01 21:14:23.000000000 -0700 +++ devel-akpm/drivers/media/dvb/dvb-usb/dtt200u-fe.c 2005-07-01 21:14:23.000000000 -0700 @@ -14,61 +14,58 @@ struct dtt200u_fe_state { struct dvb_usb_device *d; + fe_status_t stat; + struct dvb_frontend_parameters fep; struct dvb_frontend frontend; }; -#define moan(which,what) info("unexpected value in '%s' for cmd '%02x' - please report to linux-dvb@linuxtv.org",which,what) - static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_TUNE_STAT; - u8 br[3] = { 0 }; -// u8 bdeb[5] = { 0 }; + u8 st = GET_TUNE_STATUS, b[3]; + + dvb_usb_generic_rw(state->d,&st,1,b,3,0); - dvb_usb_generic_rw(state->d,&bw,1,br,3,0); - switch (br[0]) { + switch (b[0]) { case 0x01: - *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; break; - case 0x00: - *stat = 0; + case 0x00: /* pending */ + *stat = FE_TIMEDOUT; /* during set_frontend */ break; default: - moan("br[0]",GET_TUNE_STAT); + case 0x02: /* failed */ + *stat = 0; break; } - -// bw[0] = 0x88; -// dvb_usb_generic_rw(state->d,bw,1,bdeb,5,0); - -// deb_info("%02x: %02x %02x %02x %02x %02x\n",bw[0],bdeb[0],bdeb[1],bdeb[2],bdeb[3],bdeb[4]); - return 0; } + static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_BER; - *ber = 0; - dvb_usb_generic_rw(state->d,&bw,1,(u8*) ber,3,0); + u8 bw = GET_VIT_ERR_CNT,b[3]; + dvb_usb_generic_rw(state->d,&bw,1,b,3,0); + *ber = (b[0] << 16) | (b[1] << 8) | b[2]; return 0; } static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_UNK; - *unc = 0; - dvb_usb_generic_rw(state->d,&bw,1,(u8*) unc,3,0); + u8 bw = GET_RS_UNCOR_BLK_CNT,b[2]; + + dvb_usb_generic_rw(state->d,&bw,1,b,2,0); + *unc = (b[0] << 8) | b[1]; return 0; } static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_SIG_STRENGTH, b; + u8 bw = GET_AGC, b; dvb_usb_generic_rw(state->d,&bw,1,&b,1,0); *strength = (b << 8) | b; return 0; @@ -86,7 +83,7 @@ static int dtt200u_fe_read_snr(struct dv static int dtt200u_fe_init(struct dvb_frontend* fe) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 b = RESET_DEMOD; + u8 b = SET_INIT; return dvb_usb_generic_write(state->d,&b,1); } @@ -98,8 +95,8 @@ static int dtt200u_fe_sleep(struct dvb_f static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) { tune->min_delay_ms = 1500; - tune->step_size = 166667; - tune->max_drift = 166667 * 2; + tune->step_size = 0; + tune->max_drift = 0; return 0; } @@ -107,27 +104,32 @@ static int dtt200u_fe_set_frontend(struc struct dvb_frontend_parameters *fep) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int i; + fe_status_t st; u16 freq = fep->frequency / 250000; - u8 bw,bwbuf[2] = { SET_BANDWIDTH, 0 }, freqbuf[3] = { SET_FREQUENCY, 0, 0 }; + u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 }; switch (fep->u.ofdm.bandwidth) { - case BANDWIDTH_8_MHZ: bw = 8; break; - case BANDWIDTH_7_MHZ: bw = 7; break; - case BANDWIDTH_6_MHZ: bw = 6; break; + case BANDWIDTH_8_MHZ: bwbuf[1] = 8; break; + case BANDWIDTH_7_MHZ: bwbuf[1] = 7; break; + case BANDWIDTH_6_MHZ: bwbuf[1] = 6; break; case BANDWIDTH_AUTO: return -EOPNOTSUPP; default: return -EINVAL; } - deb_info("set_frontend\n"); - bwbuf[1] = bw; dvb_usb_generic_write(state->d,bwbuf,2); freqbuf[1] = freq & 0xff; freqbuf[2] = (freq >> 8) & 0xff; dvb_usb_generic_write(state->d,freqbuf,3); - memcpy(&state->fep,fep,sizeof(struct dvb_frontend_parameters)); + for (i = 0; i < 30; i++) { + msleep(20); + dtt200u_fe_read_status(fe, &st); + if (st & FE_TIMEDOUT) + continue; + } return 0; } @@ -174,7 +176,7 @@ success: static struct dvb_frontend_ops dtt200u_fe_ops = { .info = { - .name = "DTT200U (Yakumo/Typhoon/Hama) DVB-T", + .name = "WideView USB DVB-T", .type = FE_OFDM, .frequency_min = 44250000, .frequency_max = 867250000, diff -puN drivers/media/dvb/dvb-usb/dtt200u.h~dvb-usb-add-supprt-for-wideview-wt-220u drivers/media/dvb/dvb-usb/dtt200u.h --- devel/drivers/media/dvb/dvb-usb/dtt200u.h~dvb-usb-add-supprt-for-wideview-wt-220u 2005-07-01 21:14:23.000000000 -0700 +++ devel-akpm/drivers/media/dvb/dvb-usb/dtt200u.h 2005-07-01 21:14:23.000000000 -0700 @@ -22,44 +22,34 @@ extern int dvb_usb_dtt200u_debug; /* guessed protocol description (reverse engineered): * read * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1 - * 81 - - * 82 - crash - do not touch - * 83 - crash - do not touch - * 84 - remote control - * 85 - crash - do not touch (OK, stop testing here) * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal) - * 89 - noise-to-signal - * 8a - unkown 1 byte - signal_strength - * 8c - ber ??? - * 8d - ber - * 8e - unc */ -#define GET_SPEED 0x00 -#define GET_TUNE_STAT 0x81 -#define GET_RC_KEY 0x84 -#define GET_STATUS 0x88 -#define GET_SNR 0x89 -#define GET_SIG_STRENGTH 0x8a -#define GET_UNK 0x8c -#define GET_BER 0x8d -#define GET_UNC 0x8e +#define GET_SPEED 0x00 +#define GET_TUNE_STATUS 0x81 +#define GET_RC_CODE 0x84 +#define GET_CONFIGURATION 0x88 +#define GET_AGC 0x89 +#define GET_SNR 0x8a +#define GET_VIT_ERR_CNT 0x8c +#define GET_RS_ERR_CNT 0x8d +#define GET_RS_UNCOR_BLK_CNT 0x8e /* write - * 01 - reset the demod + * 01 - init * 02 - frequency (divided by 250000) * 03 - bandwidth * 04 - pid table (index pid(7:0) pid(12:8)) * 05 - reset the pid table - * 08 - demod transfer enabled or not (FX2 transfer is enabled by default) + * 08 - transfer switch */ -#define RESET_DEMOD 0x01 -#define SET_FREQUENCY 0x02 +#define SET_INIT 0x01 +#define SET_RF_FREQ 0x02 #define SET_BANDWIDTH 0x03 #define SET_PID_FILTER 0x04 #define RESET_PID_FILTER 0x05 -#define SET_TS_CTRL 0x08 +#define SET_STREAMING 0x08 extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d); diff -puN drivers/media/dvb/dvb-usb/dvb-usb-ids.h~dvb-usb-add-supprt-for-wideview-wt-220u drivers/media/dvb/dvb-usb/dvb-usb-ids.h --- devel/drivers/media/dvb/dvb-usb/dvb-usb-ids.h~dvb-usb-add-supprt-for-wideview-wt-220u 2005-07-01 21:14:23.000000000 -0700 +++ devel-akpm/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2005-07-01 21:14:23.000000000 -0700 @@ -72,6 +72,8 @@ #define USB_PID_HANFTEK_UMT_010_WARM 0x0015 #define USB_PID_DTT200U_COLD 0x0201 #define USB_PID_DTT200U_WARM 0x0301 +#define USB_PID_WT220U_COLD 0x0222 +#define USB_PID_WT220U_WARM 0x0221 #define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 #define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 #define USB_PID_NEBULA_DIGITV 0x0201 @@ -84,5 +86,4 @@ #define USB_PID_KYE_DVB_T_COLD 0x701e #define USB_PID_KYE_DVB_T_WARM 0x701f - #endif diff -puN drivers/media/dvb/dvb-usb/Kconfig~dvb-usb-add-supprt-for-wideview-wt-220u drivers/media/dvb/dvb-usb/Kconfig --- devel/drivers/media/dvb/dvb-usb/Kconfig~dvb-usb-add-supprt-for-wideview-wt-220u 2005-07-01 21:14:23.000000000 -0700 +++ devel-akpm/drivers/media/dvb/dvb-usb/Kconfig 2005-07-01 21:14:23.000000000 -0700 @@ -109,9 +109,11 @@ config DVB_USB_NOVA_T_USB2 Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. config DVB_USB_DTT200U - tristate "WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 support" + tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" depends on DVB_USB help Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). + + The WT-220U and its clones are pen-sized. _