From: Adrian Bunk <bunk@stusta.de>
iph5526 does not compiles since 2.5 and was therefore marked as broken. This
patch removes it.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
/dev/null | 5889 -------------------------------------------
25-akpm/drivers/net/Kconfig | 9
25-akpm/drivers/net/Makefile | 1
3 files changed, 5899 deletions(-)
diff -L drivers/net/fc/iph5526.c -puN drivers/net/fc/iph5526.c~kill-iphase5526 /dev/null
--- 25/drivers/net/fc/iph5526.c
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,4645 +0,0 @@
-/**********************************************************************
- * iph5526.c: IP/SCSI driver for the Interphase 5526 PCI Fibre Channel
- * Card.
- * Copyright (C) 1999 Vineet M Abraham <vmabraham@hotmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *********************************************************************/
-/**********************************************************************
-Log:
-Vineet M Abraham
-02.12.99 Support multiple cards.
-03.15.99 Added Fabric support.
-04.04.99 Added N_Port support.
-04.15.99 Added SCSI support.
-06.18.99 Added ABTS Protocol.
-06.24.99 Fixed data corruption when multiple XFER_RDYs are received.
-07.07.99 Can be loaded as part of the Kernel. Changed semaphores. Added
- more checks before invalidating SEST entries.
-07.08.99 Added Broadcast IP stuff and fixed an unicast timeout bug.
-***********************************************************************/
-/* TODO:
- R_T_TOV set to 15msec in Loop topology. Need to be 100 msec.
- SMP testing.
- Fix ADISC Tx before completing FLOGI.
-*/
-
-static const char *version =
- "iph5526.c:v1.0 07.08.99 Vineet Abraham (vmabraham@hotmail.com)\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/fcdevice.h> /* had the declarations for init_fcdev among
- others + includes if_fcdevice.h */
-
-#include "../../scsi/scsi.h"
-#include <scsi/scsi_host.h>
-#include "../../fc4/fcp.h"
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-/* driver specific header files */
-#include "tach.h"
-#include "tach_structs.h"
-#include "iph5526_ip.h"
-#include "iph5526_scsi.h"
-#include "iph5526_novram.c"
-
-#define RUN_AT(x) (jiffies + (x))
-
-#define DEBUG_5526_0 0
-#define DEBUG_5526_1 0
-#define DEBUG_5526_2 0
-
-#if DEBUG_5526_0
-#define DPRINTK(format, a...) {printk("%s: ", fi->name); \
- printk(format, ##a); \
- printk("\n");}
-#define ENTER(x) {printk("%s: ", fi->name); \
- printk("iph5526.c : entering %s()\n", x);}
-#define LEAVE(x) {printk("%s: ", fi->name); \
- printk("iph5526.c : leaving %s()\n",x);}
-
-#else
-#define DPRINTK(format, a...) {}
-#define ENTER(x) {}
-#define LEAVE(x) {}
-#endif
-
-#if DEBUG_5526_1
-#define DPRINTK1(format, a...) {printk("%s: ", fi->name); \
- printk(format, ##a); \
- printk("\n");}
-#else
-#define DPRINTK1(format, a...) {}
-#endif
-
-#if DEBUG_5526_2
-#define DPRINTK2(format, a...) {printk("%s: ", fi->name); \
- printk(format, ##a); \
- printk("\n");}
-#else
-#define DPRINTK2(format, a...) {}
-#endif
-
-#define T_MSG(format, a...) {printk("%s: ", fi->name); \
- printk(format, ##a);\
- printk("\n");}
-
-#define ALIGNED_SFS_ADDR(addr) ((((unsigned long)(addr) + (SFS_BUFFER_SIZE - 1)) & ~(SFS_BUFFER_SIZE - 1)) - (unsigned long)(addr))
-#define ALIGNED_ADDR(addr, len) ((((unsigned long)(addr) + (len - 1)) & ~(len - 1)) - (unsigned long)(addr))
-
-
-static struct pci_device_id iph5526_pci_tbl[] = {
- { PCI_VENDOR_ID_INTERPHASE, PCI_DEVICE_ID_INTERPHASE_5526, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTERPHASE, PCI_DEVICE_ID_INTERPHASE_55x6, PCI_ANY_ID, PCI_ANY_ID, },
- { } /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, iph5526_pci_tbl);
-
-MODULE_LICENSE("GPL");
-
-#define MAX_FC_CARDS 2
-static struct fc_info *fc[MAX_FC_CARDS+1];
-static unsigned int pci_irq_line;
-static struct {
- unsigned short vendor_id;
- unsigned short device_id;
- char *name;
-}
-clone_list[] __initdata = {
- {PCI_VENDOR_ID_INTERPHASE, PCI_DEVICE_ID_INTERPHASE_5526, "Interphase Fibre Channel HBA"},
- {PCI_VENDOR_ID_INTERPHASE, PCI_DEVICE_ID_INTERPHASE_55x6, "Interphase Fibre Channel HBA"},
- {0,}
-};
-
-static irqreturn_t tachyon_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static void tachyon_interrupt_handler(int irq, void* dev_id, struct pt_regs* regs);
-
-static int initialize_register_pointers(struct fc_info *fi);
-void clean_up_memory(struct fc_info *fi);
-
-static int tachyon_init(struct fc_info *fi);
-static int build_queues(struct fc_info *fi);
-static void build_tachyon_header(struct fc_info *fi, u_int my_id, u_int r_ctl, u_int d_id, u_int type, u_char seq_id, u_char df_ctl, u_short ox_id, u_short rx_id, char *data);
-static int get_free_header(struct fc_info *fi);
-static void build_EDB(struct fc_info *fi, char *data, u_short flags, u_short len);
-static int get_free_EDB(struct fc_info *fi);
-static void build_ODB(struct fc_info *fi, u_char seq_id, u_int d_id, u_int len, u_int cntl, u_short mtu, u_short ox_id, u_short rx_id, int NW_header, int int_required, u_int frame_class);
-static void write_to_tachyon_registers(struct fc_info *fi);
-static void reset_latch(struct fc_info *fi);
-static void reset_tachyon(struct fc_info *fi, u_int value);
-static void take_tachyon_offline(struct fc_info *fi);
-static void read_novram(struct fc_info *fi);
-static void reset_ichip(struct fc_info *fi);
-static void update_OCQ_indx(struct fc_info *fi);
-static void update_IMQ_indx(struct fc_info *fi, int count);
-static void update_SFSBQ_indx(struct fc_info *fi);
-static void update_MFSBQ_indx(struct fc_info *fi, int count);
-static void update_tachyon_header_indx(struct fc_info *fi);
-static void update_EDB_indx(struct fc_info *fi);
-static void handle_FM_interrupt(struct fc_info *fi);
-static void handle_MFS_interrupt(struct fc_info *fi);
-static void handle_OOO_interrupt(struct fc_info *fi);
-static void handle_SFS_interrupt(struct fc_info *fi);
-static void handle_OCI_interrupt(struct fc_info *fi);
-static void handle_SFS_BUF_WARN_interrupt(struct fc_info *fi);
-static void handle_MFS_BUF_WARN_interrupt(struct fc_info *fi);
-static void handle_IMQ_BUF_WARN_interrupt(struct fc_info *fi);
-static void handle_Unknown_Frame_interrupt(struct fc_info *fi);
-static void handle_Busied_Frame_interrupt(struct fc_info *fi);
-static void handle_Bad_SCSI_Frame_interrupt(struct fc_info *fi);
-static void handle_Inbound_SCSI_Status_interrupt(struct fc_info *fi);
-static void handle_Inbound_SCSI_Command_interrupt(struct fc_info *fi);
-static void completion_message_handler(struct fc_info *fi, u_int imq_int_type);
-static void fill_login_frame(struct fc_info *fi, u_int logi);
-
-static int tx_exchange(struct fc_info *fi, char *data, u_int len, u_int r_ctl, u_int type, u_int d_id, u_int mtu, int int_required, u_short ox_id, u_int frame_class);
-static int tx_sequence(struct fc_info *fi, char *data, u_int len, u_int mtu, u_int d_id, u_short ox_id, u_short rx_id, u_char seq_id, int NW_flag, int int_required, u_int frame_class);
-static int validate_login(struct fc_info *fi, u_int *base_ptr);
-static void add_to_address_cache(struct fc_info *fi, u_int *base_ptr);
-static void remove_from_address_cache(struct fc_info *fi, u_int *data, u_int cmnd_code);
-static int node_logged_in_prev(struct fc_info *fi, u_int *buff_addr);
-static int sid_logged_in(struct fc_info *fi, u_int s_id);
-static struct fc_node_info *look_up_cache(struct fc_info *fi, char *data);
-static int display_cache(struct fc_info *fi);
-
-static void tx_logi(struct fc_info *fi, u_int logi, u_int d_id);
-static void tx_logi_acc(struct fc_info *fi, u_int logi, u_int d_id, u_short received_ox_id);
-static void tx_prli(struct fc_info *fi, u_int command_code, u_int d_id, u_short received_ox_id);
-static void tx_logo(struct fc_info *fi, u_int d_id, u_short received_ox_id);
-static void tx_adisc(struct fc_info *fi, u_int cmnd_code, u_int d_id, u_short received_ox_id);
-static void tx_ls_rjt(struct fc_info *fi, u_int d_id, u_short received_ox_id, u_short reason_code, u_short expln_code);
-static u_int plogi_ok(struct fc_info *fi, u_int *buff_addr, int size);
-static void tx_acc(struct fc_info *fi, u_int d_id, u_short received_ox_id);
-static void tx_name_server_req(struct fc_info *fi, u_int req);
-static void rscn_handler(struct fc_info *fi, u_int node_id);
-static void tx_scr(struct fc_info *fi);
-static void scr_timer(unsigned long data);
-static void explore_fabric(struct fc_info *fi, u_int *buff_addr);
-static void perform_adisc(struct fc_info *fi);
-static void local_port_discovery(struct fc_info *fi);
-static void add_to_ox_id_list(struct fc_info *fi, u_int transaction_id, u_int cmnd_code);
-static u_int remove_from_ox_id_list(struct fc_info *fi, u_short received_ox_id);
-static void add_display_cache_timer(struct fc_info *fi);
-
-/* Timers... */
-static void nos_ols_timer(unsigned long data);
-static void loop_timer(unsigned long data);
-static void fabric_explore_timer(unsigned long data);
-static void port_discovery_timer(unsigned long data);
-static void display_cache_timer(unsigned long data);
-
-/* SCSI Stuff */
-static int add_to_sest(struct fc_info *fi, Scsi_Cmnd *Cmnd, struct fc_node_info *ni);
-static struct fc_node_info *resolve_target(struct fc_info *fi, u_char target);
-static void update_FCP_CMND_indx(struct fc_info *fi);
-static int get_free_SDB(struct fc_info *fi);
-static void update_SDB_indx(struct fc_info *fi);
-static void mark_scsi_sid(struct fc_info *fi, u_int *buff_addr, u_char action);
-static void invalidate_SEST_entry(struct fc_info *fi, u_short received_ox_id);
-static int abort_exchange(struct fc_info *fi, u_short ox_id);
-static void flush_tachyon_cache(struct fc_info *fi, u_short ox_id);
-static int get_scsi_oxid(struct fc_info *fi);
-static void update_scsi_oxid(struct fc_info *fi);
-
-static Scsi_Host_Template driver_template = IPH5526_SCSI_FC;
-
-static void iph5526_timeout(struct net_device *dev);
-
-static int iph5526_probe_pci(struct net_device *dev);
-
-int __init iph5526_probe(struct net_device *dev)
-{
- if (iph5526_probe_pci(dev) == 0)
- return 0;
- return -ENODEV;
-}
-
-static int __init iph5526_probe_pci(struct net_device *dev)
-{
- struct fc_info *fi = dev->priv;
- fi->dev = dev;
- dev->base_addr = fi->base_addr;
- dev->irq = fi->irq;
- if (dev->priv == NULL)
- dev->priv = fi;
- fcdev_init(dev);
- /* Assign ur MAC address.
- */
- dev->dev_addr[0] = (fi->g.my_port_name_high & 0x0000FF00) >> 8;
- dev->dev_addr[1] = fi->g.my_port_name_high;
- dev->dev_addr[2] = (fi->g.my_port_name_low & 0xFF000000) >> 24;
- dev->dev_addr[3] = (fi->g.my_port_name_low & 0x00FF0000) >> 16;
- dev->dev_addr[4] = (fi->g.my_port_name_low & 0x0000FF00) >> 8;
- dev->dev_addr[5] = fi->g.my_port_name_low;
- display_cache(fi);
- return 0;
-}
-
-static int __init fcdev_init(struct net_device *dev)
-{
- SET_MODULE_OWNER(dev);
- dev->open = iph5526_open;
- dev->stop = iph5526_close;
- dev->hard_start_xmit = iph5526_send_packet;
- dev->get_stats = iph5526_get_stats;
- dev->set_multicast_list = NULL;
- dev->change_mtu = iph5526_change_mtu;
- dev->tx_timeout = iph5526_timeout;
- dev->watchdog_timeo = 5*HZ;
- return 0;
-}
-
-/* initialize tachyon and take it OnLine */
-static int tachyon_init(struct fc_info *fi)
-{
- ENTER("tachyon_init");
- if (build_queues(fi) == 0) {
- T_MSG("build_queues() failed");
- return 0;
- }
-
- /* Retrieve your port/node name.
- */
- read_novram(fi);
-
- reset_ichip(fi);
-
- reset_tachyon(fi, SOFTWARE_RESET);
-
- LEAVE("tachyon_init");
- return 1;
-}
-
-/* Build the 4 Qs - IMQ, OCQ, MFSBQ, SFSBQ */
-/* Lots of dma_pages needed as Tachyon DMAs almost everything into
- * host memory.
- */
-static int build_queues(struct fc_info *fi)
-{
-int i,j;
-u_char *addr;
- ENTER("build_queues");
- /* Initializing Queue Variables.
- */
- fi->q.ptr_host_ocq_cons_indx = NULL;
- fi->q.ptr_host_hpcq_cons_indx = NULL;
- fi->q.ptr_host_imq_prod_indx = NULL;
-
- fi->q.ptr_ocq_base = NULL;
- fi->q.ocq_len = 0;
- fi->q.ocq_end = 0;
- fi->q.ocq_prod_indx = 0;
-
- fi->q.ptr_imq_base = NULL;
- fi->q.imq_len = 0;
- fi->q.imq_end = 0;
- fi->q.imq_cons_indx = 0;
- fi->q.imq_prod_indx = 0;
-
- fi->q.ptr_mfsbq_base = NULL;
- fi->q.mfsbq_len = 0;
- fi->q.mfsbq_end = 0;
- fi->q.mfsbq_prod_indx = 0;
- fi->q.mfsbq_cons_indx = 0;
- fi->q.mfsbuff_len = 0;
- fi->q.mfsbuff_end = 0;
- fi->g.mfs_buffer_count = 0;
-
- fi->q.ptr_sfsbq_base = NULL;
- fi->q.sfsbq_len = 0;
- fi->q.sfsbq_end = 0;
- fi->q.sfsbq_prod_indx = 0;
- fi->q.sfsbq_cons_indx = 0;
- fi->q.sfsbuff_len = 0;
- fi->q.sfsbuff_end = 0;
-
- fi->q.sdb_indx = 0;
- fi->q.fcp_cmnd_indx = 0;
-
- fi->q.ptr_edb_base = NULL;
- fi->q.edb_buffer_indx = 0;
- fi->q.ptr_tachyon_header_base = NULL;
- fi->q.tachyon_header_indx = 0;
- fi->node_info_list = NULL;
- fi->ox_id_list = NULL;
- fi->g.loop_up = FALSE;
- fi->g.ptp_up = FALSE;
- fi->g.link_up = FALSE;
- fi->g.fabric_present = FALSE;
- fi->g.n_port_try = FALSE;
- fi->g.dont_init = FALSE;
- fi->g.nport_timer_set = FALSE;
- fi->g.lport_timer_set = FALSE;
- fi->g.no_of_targets = 0;
- fi->g.sem = 0;
- fi->g.perform_adisc = FALSE;
- fi->g.e_i = 0;
-
- /* build OCQ */
- if ( (fi->q.ptr_ocq_base = (u_int *)__get_free_pages(GFP_KERNEL, 0)) == 0) {
- T_MSG("failed to get OCQ page");
- return 0;
- }
- /* set up the OCQ structures */
- for (i = 0; i < OCQ_LENGTH; i++)
- fi->q.ptr_odb[i] = fi->q.ptr_ocq_base + NO_OF_ENTRIES*i;
-
- /* build IMQ */
- if ( (fi->q.ptr_imq_base = (u_int *)__get_free_pages(GFP_KERNEL, 0)) == 0) {
- T_MSG("failed to get IMQ page");
- return 0;
- }
- for (i = 0; i < IMQ_LENGTH; i++)
- fi->q.ptr_imqe[i] = fi->q.ptr_imq_base + NO_OF_ENTRIES*i;
-
- /* build MFSBQ */
- if ( (fi->q.ptr_mfsbq_base = (u_int *)__get_free_pages(GFP_KERNEL, 0)) == 0) {
- T_MSG("failed to get MFSBQ page");
- return 0;
- }
- memset((char *)fi->q.ptr_mfsbq_base, 0, MFSBQ_LENGTH * 32);
- /* Allocate one huge chunk of memory... helps while reassembling
- * frames.
- */
- if ( (addr = (u_char *)__get_free_pages(GFP_KERNEL, 5) ) == 0) {
- T_MSG("failed to get MFSBQ page");
- return 0;
- }
- /* fill in addresses of empty buffers */
- for (i = 0; i < MFSBQ_LENGTH; i++) {
- for (j = 0; j < NO_OF_ENTRIES; j++) {
- *(fi->q.ptr_mfsbq_base + i*NO_OF_ENTRIES + j) = htonl(virt_to_bus(addr));
- addr += MFS_BUFFER_SIZE;
- }
- }
-
- /* The number of entries in each MFS buffer is 8. There are 8
- * MFS buffers. That leaves us with 4096-256 bytes. We use them
- * as temporary space for ELS frames. This is done to make sure that
- * the addresses are aligned.
- */
- fi->g.els_buffer[0] = fi->q.ptr_mfsbq_base + MFSBQ_LENGTH*NO_OF_ENTRIES;
- for (i = 1; i < MAX_PENDING_FRAMES; i++)
- fi->g.els_buffer[i] = fi->g.els_buffer[i-1] + 64;
-
- /* build SFSBQ */
- if ( (fi->q.ptr_sfsbq_base = (u_int *)__get_free_pages(GFP_KERNEL, 0)) == 0) {
- T_MSG("failed to get SFSBQ page");
- return 0;
- }
- memset((char *)fi->q.ptr_sfsbq_base, 0, SFSBQ_LENGTH * 32);
- /* fill in addresses of empty buffers */
- for (i = 0; i < SFSBQ_LENGTH; i++)
- for (j = 0; j < NO_OF_ENTRIES; j++){
- addr = kmalloc(SFS_BUFFER_SIZE*2, GFP_KERNEL);
- if (addr == NULL){
- T_MSG("ptr_sfs_buffer : memory not allocated");
- return 0;
- }
- else {
- int offset = ALIGNED_SFS_ADDR(addr);
- memset((char *)addr, 0, SFS_BUFFER_SIZE);
- fi->q.ptr_sfs_buffers[i*NO_OF_ENTRIES +j] = (u_int *)addr;
- addr += offset;
- *(fi->q.ptr_sfsbq_base + i*NO_OF_ENTRIES + j) = htonl(virt_to_bus(addr));
- }
- }
-
- /* The number of entries in each SFS buffer is 8. There are 8
- * MFS buffers. That leaves us with 4096-256 bytes. We use them
- * as temporary space for ARP frames. This is done inorder to
- * support HW_Types of 0x1 and 0x6.
- */
- fi->g.arp_buffer = (char *)fi->q.ptr_sfsbq_base + SFSBQ_LENGTH*NO_OF_ENTRIES*4;
-
- /* build EDB */
- if ((fi->q.ptr_edb_base = (u_int *)__get_free_pages(GFP_KERNEL, 5) ) == 0) {
- T_MSG("failed to get EDB page");
- return 0;
- }
- for (i = 0; i < EDB_LEN; i++)
- fi->q.ptr_edb[i] = fi->q.ptr_edb_base + 2*i;
-
- /* build SEST */
-
- /* OX_IDs range from 0x0 - 0x4FFF.
- */
- if ((fi->q.ptr_sest_base = (u_int *)__get_free_pages(GFP_KERNEL, 5)) == 0) {
- T_MSG("failed to get SEST page");
- return 0;
- }
- for (i = 0; i < SEST_LENGTH; i++)
- fi->q.ptr_sest[i] = fi->q.ptr_sest_base + NO_OF_ENTRIES*i;
-
- if ((fi->q.ptr_sdb_base = (u_int *)__get_free_pages(GFP_KERNEL, 5)) == 0) {
- T_MSG("failed to get SDB page");
- return 0;
- }
- for (i = 0 ; i < NO_OF_SDB_ENTRIES; i++)
- fi->q.ptr_sdb_slot[i] = fi->q.ptr_sdb_base + (SDB_SIZE/4)*i;
-
- if ((fi->q.ptr_fcp_cmnd_base = (u_int *)__get_free_pages(GFP_KERNEL, 0)) == 0) {
- T_MSG("failed to get FCP_CMND page");
- return 0;
- }
- for (i = 0; i < NO_OF_FCP_CMNDS; i++)
- fi->q.ptr_fcp_cmnd[i] = fi->q.ptr_fcp_cmnd_base + NO_OF_ENTRIES*i;
-
- /* Allocate space for Tachyon Header as well...
- */
- if ((fi->q.ptr_tachyon_header_base = (u_int *)__get_free_pages(GFP_KERNEL, 0) ) == 0) {
- T_MSG("failed to get tachyon_header page");
- return 0;
- }
- for (i = 0; i < NO_OF_TACH_HEADERS; i++)
- fi->q.ptr_tachyon_header[i] = fi->q.ptr_tachyon_header_base + 16*i;
-
- /* Allocate memory for indices.
- * Indices should be aligned on 32 byte boundaries.
- */
- fi->q.host_ocq_cons_indx = kmalloc(2*32, GFP_KERNEL);
- if (fi->q.host_ocq_cons_indx == NULL){
- T_MSG("fi->q.host_ocq_cons_indx : memory not allocated");
- return 0;
- }
- fi->q.ptr_host_ocq_cons_indx = fi->q.host_ocq_cons_indx;
- if ((u_long)(fi->q.host_ocq_cons_indx) % 32)
- fi->q.host_ocq_cons_indx++;
-
- fi->q.host_hpcq_cons_indx = kmalloc(2*32, GFP_KERNEL);
- if (fi->q.host_hpcq_cons_indx == NULL){
- T_MSG("fi->q.host_hpcq_cons_indx : memory not allocated");
- return 0;
- }
- fi->q.ptr_host_hpcq_cons_indx= fi->q.host_hpcq_cons_indx;
- if ((u_long)(fi->q.host_hpcq_cons_indx) % 32)
- fi->q.host_hpcq_cons_indx++;
-
- fi->q.host_imq_prod_indx = kmalloc(2*32, GFP_KERNEL);
- if (fi->q.host_imq_prod_indx == NULL){
- T_MSG("fi->q.host_imq_prod_indx : memory not allocated");
- return 0;
- }
- fi->q.ptr_host_imq_prod_indx = fi->q.host_imq_prod_indx;
- if ((u_long)(fi->q.host_imq_prod_indx) % 32)
- fi->q.host_imq_prod_indx++;
-
- LEAVE("build_queues");
- return 1;
-}
-
-
-static void write_to_tachyon_registers(struct fc_info *fi)
-{
-u_int bus_addr, bus_indx_addr, i;
-
- ENTER("write_to_tachyon_registers");
-
- /* Clear Queues each time Tachyon is reset */
- memset((char *)fi->q.ptr_ocq_base, 0, OCQ_LENGTH * 32);
- memset((char *)fi->q.ptr_imq_base, 0, IMQ_LENGTH * 32);
- memset((char *)fi->q.ptr_edb_base, 0, EDB_LEN * 8);
- memset((char *)fi->q.ptr_sest_base, 0, SEST_LENGTH * 32);
- memset((char *)fi->q.ptr_sdb_base, 0, NO_OF_SDB_ENTRIES * SDB_SIZE);
- memset((char *)fi->q.ptr_tachyon_header_base, 0xFF, NO_OF_TACH_HEADERS * TACH_HEADER_SIZE);
- for (i = 0; i < SEST_LENGTH; i++)
- fi->q.free_scsi_oxid[i] = OXID_AVAILABLE;
- for (i = 0; i < NO_OF_SDB_ENTRIES; i++)
- fi->q.sdb_slot_status[i] = SDB_FREE;
-
- take_tachyon_offline(fi);
- writel(readl(fi->t_r.ptr_tach_config_reg) | SCSI_ENABLE | WRITE_STREAM_SIZE | READ_STREAM_SIZE | PARITY_EVEN | OOO_REASSEMBLY_DISABLE, fi->t_r.ptr_tach_config_reg);
-
- /* Write OCQ registers */
- fi->q.ocq_prod_indx = 0;
- *(fi->q.host_ocq_cons_indx) = 0;
-
- /* The Tachyon needs to be passed the "real" address */
- bus_addr = virt_to_bus(fi->q.ptr_ocq_base);
- writel(bus_addr, fi->t_r.ptr_ocq_base_reg);
- writel(OCQ_LENGTH - 1, fi->t_r. ptr_ocq_len_reg);
- bus_indx_addr = virt_to_bus(fi->q.host_ocq_cons_indx);
- writel(bus_indx_addr, fi->t_r.ptr_ocq_cons_indx_reg);
-
- /* Write IMQ registers */
- fi->q.imq_cons_indx = 0;
- *(fi->q.host_imq_prod_indx) = 0;
- bus_addr = virt_to_bus(fi->q.ptr_imq_base);
- writel(bus_addr, fi->t_r.ptr_imq_base_reg);
- writel(IMQ_LENGTH - 1, fi->t_r.ptr_imq_len_reg);
- bus_indx_addr = virt_to_bus(fi->q.host_imq_prod_indx);
- writel(bus_indx_addr, fi->t_r.ptr_imq_prod_indx_reg);
-
- /* Write MFSBQ registers */
- fi->q.mfsbq_prod_indx = MFSBQ_LENGTH - 1;
- fi->q.mfsbuff_end = MFS_BUFFER_SIZE - 1;
- fi->q.mfsbq_cons_indx = 0;
- bus_addr = virt_to_bus(fi->q.ptr_mfsbq_base);
- writel(bus_addr, fi->t_r.ptr_mfsbq_base_reg);
- writel(MFSBQ_LENGTH - 1, fi->t_r.ptr_mfsbq_len_reg);
- writel(fi->q.mfsbuff_end, fi->t_r.ptr_mfsbuff_len_reg);
- /* Do this last as tachyon will prefetch the
- * first entry as soon as we write to it.
- */
- writel(fi->q.mfsbq_prod_indx, fi->t_r.ptr_mfsbq_prod_reg);
-
- /* Write SFSBQ registers */
- fi->q.sfsbq_prod_indx = SFSBQ_LENGTH - 1;
- fi->q.sfsbuff_end = SFS_BUFFER_SIZE - 1;
- fi->q.sfsbq_cons_indx = 0;
- bus_addr = virt_to_bus(fi->q.ptr_sfsbq_base);
- writel(bus_addr, fi->t_r.ptr_sfsbq_base_reg);
- writel(SFSBQ_LENGTH - 1, fi->t_r.ptr_sfsbq_len_reg);
- writel(fi->q.sfsbuff_end, fi->t_r.ptr_sfsbuff_len_reg);
- /* Do this last as tachyon will prefetch the first
- * entry as soon as we write to it.
- */
- writel(fi->q.sfsbq_prod_indx, fi->t_r.ptr_sfsbq_prod_reg);
-
- /* Write SEST registers */
- bus_addr = virt_to_bus(fi->q.ptr_sest_base);
- writel(bus_addr, fi->t_r.ptr_sest_base_reg);
- writel(SEST_LENGTH - 1, fi->t_r.ptr_sest_len_reg);
- /* the last 2 bits _should_ be 1 */
- writel(SEST_BUFFER_SIZE - 1, fi->t_r.ptr_scsibuff_len_reg);
-
- /* write AL_TIME & E_D_TOV into the registers */
- writel(TOV_VALUES, fi->t_r.ptr_fm_tov_reg);
- /* Tell Tachyon to pick a Soft Assigned AL_PA */
- writel(LOOP_INIT_SOFT_ADDRESS, fi->t_r.ptr_fm_config_reg);
-
- /* Read the WWN from EEPROM . But, for now we assign it here. */
- writel(WORLD_WIDE_NAME_LOW, fi->t_r.ptr_fm_wwn_low_reg);
- writel(WORLD_WIDE_NAME_HIGH, fi->t_r.ptr_fm_wwn_hi_reg);
-
- DPRINTK1("TACHYON initializing as L_Port...\n");
- writel(INITIALIZE, fi->t_r.ptr_fm_control_reg);
-
- LEAVE("write_to_tachyon_registers");
-}
-
-
-static irqreturn_t tachyon_interrupt(int irq, void* dev_id, struct pt_regs* regs)
-{
-struct Scsi_Host *host = dev_id;
-struct iph5526_hostdata *hostdata = (struct iph5526_hostdata *)host->hostdata;
-struct fc_info *fi = hostdata->fi;
-u_long flags;
- spin_lock_irqsave(&fi->fc_lock, flags);
- tachyon_interrupt_handler(irq, dev_id, regs);
- spin_unlock_irqrestore(&fi->fc_lock, flags);
- return IRQ_HANDLED;
-}
-
-static void tachyon_interrupt_handler(int irq, void* dev_id, struct pt_regs* regs)
-{
-struct Scsi_Host *host = dev_id;
-struct iph5526_hostdata *hostdata = (struct iph5526_hostdata *)host->hostdata;
-struct fc_info *fi = hostdata->fi;
-u_int *ptr_imq_entry;
-u_int imq_int_type, current_IMQ_index = 0, prev_IMQ_index;
-int index, no_of_entries = 0;
-
- DPRINTK("\n");
- ENTER("tachyon_interrupt");
- if (fi->q.host_imq_prod_indx != NULL) {
- current_IMQ_index = ntohl(*(fi->q.host_imq_prod_indx));
- }
- else {
- /* _Should not_ happen */
- T_MSG("IMQ_indx NULL. DISABLING INTERRUPTS!!!\n");
- writel(0x0, fi->i_r.ptr_ichip_hw_control_reg);
- }
-
- if (current_IMQ_index > fi->q.imq_cons_indx)
- no_of_entries = current_IMQ_index - fi->q.imq_cons_indx;
- else
- if (current_IMQ_index < fi->q.imq_cons_indx)
- no_of_entries = IMQ_LENGTH - (fi->q.imq_cons_indx - current_IMQ_index);
-
- if (no_of_entries == 0) {
- u_int ichip_status;
- ichip_status = readl(fi->i_r.ptr_ichip_hw_status_reg);
- if (ichip_status & 0x20) {
- /* Should _never_ happen. Might require a hard reset */
- T_MSG("Too bad... PCI Bus Error. Resetting (i)chip");
- reset_ichip(fi);
- T_MSG("DISABLING INTERRUPTS!!!\n");
- writel(0x0, fi->i_r.ptr_ichip_hw_control_reg);
- }
- }
-
- prev_IMQ_index = current_IMQ_index;
- for (index = 0; index < no_of_entries; index++) {
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- imq_int_type = ntohl(*ptr_imq_entry);
-
- completion_message_handler(fi, imq_int_type);
- if ((fi->g.link_up == FALSE) && ((imq_int_type == MFS_BUF_WARN) || (imq_int_type == SFS_BUF_WARN) || (imq_int_type == IMQ_BUF_WARN)))
- break;
- update_IMQ_indx(fi, 1);
-
- /* Check for more entries */
- current_IMQ_index = ntohl(*(fi->q.host_imq_prod_indx));
- if (current_IMQ_index != prev_IMQ_index) {
- no_of_entries++;
- prev_IMQ_index = current_IMQ_index;
- }
- } /*end of for loop*/
- LEAVE("tachyon_interrupt");
- return;
-}
-
-
-static void handle_SFS_BUF_WARN_interrupt(struct fc_info *fi)
-{
-int i;
- ENTER("handle_SFS_BUF_WARN_interrupt");
- if (fi->g.link_up == FALSE) {
- reset_tachyon(fi, SOFTWARE_RESET);
- return;
- }
- /* Free up all but one entry in the Q.
- */
- for (i = 0; i < ((SFSBQ_LENGTH - 1) * NO_OF_ENTRIES); i++) {
- handle_SFS_interrupt(fi);
- update_IMQ_indx(fi, 1);
- }
- LEAVE("handle_SFS_BUF_WARN_interrupt");
-}
-
-/* Untested_Code_Begin */
-static void handle_MFS_BUF_WARN_interrupt(struct fc_info *fi)
-{
-int i;
- ENTER("handle_MFS_BUF_WARN_interrupt");
- if (fi->g.link_up == FALSE) {
- reset_tachyon(fi, SOFTWARE_RESET);
- return;
- }
- /* FIXME: freeing up 8 entries.
- */
- for (i = 0; i < NO_OF_ENTRIES; i++) {
- handle_MFS_interrupt(fi);
- update_IMQ_indx(fi, 1);
- }
- LEAVE("handle_MFS_BUF_WARN_interrupt");
-}
-/*Untested_Code_End */
-
-static void handle_IMQ_BUF_WARN_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry;
-u_int imq_int_type, current_IMQ_index = 0, temp_imq_cons_indx;
-int index, no_of_entries = 0;
-
- ENTER("handle_IMQ_BUF_WARN_interrupt");
- if (fi->g.link_up == FALSE) {
- reset_tachyon(fi, SOFTWARE_RESET);
- return;
- }
- current_IMQ_index = ntohl(*(fi->q.host_imq_prod_indx));
-
- if (current_IMQ_index > fi->q.imq_cons_indx)
- no_of_entries = current_IMQ_index - fi->q.imq_cons_indx;
- else
- if (current_IMQ_index < fi->q.imq_cons_indx)
- no_of_entries = IMQ_LENGTH - (fi->q.imq_cons_indx - current_IMQ_index);
- /* We don't want to look at the same IMQ entry again.
- */
- temp_imq_cons_indx = fi->q.imq_cons_indx + 1;
- if (no_of_entries != 0)
- no_of_entries -= 1;
- for (index = 0; index < no_of_entries; index++) {
- ptr_imq_entry = fi->q.ptr_imqe[temp_imq_cons_indx];
- imq_int_type = ntohl(*ptr_imq_entry);
- if (imq_int_type != IMQ_BUF_WARN)
- completion_message_handler(fi, imq_int_type);
- temp_imq_cons_indx++;
- if (temp_imq_cons_indx == IMQ_LENGTH)
- temp_imq_cons_indx = 0;
- } /*end of for loop*/
- if (no_of_entries != 0)
- update_IMQ_indx(fi, no_of_entries);
- LEAVE("handle_IMQ_BUF_WARN_interrupt");
-}
-
-static void completion_message_handler(struct fc_info *fi, u_int imq_int_type)
-{
- switch(imq_int_type) {
- case OUTBOUND_COMPLETION:
- DPRINTK("OUTBOUND_COMPLETION message received");
- break;
- case OUTBOUND_COMPLETION_I:
- DPRINTK("OUTBOUND_COMPLETION_I message received");
- handle_OCI_interrupt(fi);
- break;
- case OUT_HI_PRI_COMPLETION:
- DPRINTK("OUT_HI_PRI_COMPLETION message received");
- break;
- case OUT_HI_PRI_COMPLETION_I:
- DPRINTK("OUT_HI_PRI_COMPLETION_I message received");
- break;
- case INBOUND_MFS_COMPLETION:
- DPRINTK("INBOUND_MFS_COMPLETION message received");
- handle_MFS_interrupt(fi);
- break;
- case INBOUND_OOO_COMPLETION:
- DPRINTK("INBOUND_OOO_COMPLETION message received");
- handle_OOO_interrupt(fi);
- break;
- case INBOUND_SFS_COMPLETION:
- DPRINTK("INBOUND_SFS_COMPLETION message received");
- handle_SFS_interrupt(fi);
- break;
- case INBOUND_UNKNOWN_FRAME_I:
- DPRINTK("INBOUND_UNKNOWN_FRAME message received");
- handle_Unknown_Frame_interrupt(fi);
- break;
- case INBOUND_BUSIED_FRAME:
- DPRINTK("INBOUND_BUSIED_FRAME message received");
- handle_Busied_Frame_interrupt(fi);
- break;
- case FRAME_MGR_INTERRUPT:
- DPRINTK("FRAME_MGR_INTERRUPT message received");
- handle_FM_interrupt(fi);
- break;
- case READ_STATUS:
- DPRINTK("READ_STATUS message received");
- break;
- case SFS_BUF_WARN:
- DPRINTK("SFS_BUF_WARN message received");
- handle_SFS_BUF_WARN_interrupt(fi);
- break;
- case MFS_BUF_WARN:
- DPRINTK("MFS_BUF_WARN message received");
- handle_MFS_BUF_WARN_interrupt(fi);
- break;
- case IMQ_BUF_WARN:
- DPRINTK("IMQ_BUF_WARN message received");
- handle_IMQ_BUF_WARN_interrupt(fi);
- break;
- case INBOUND_C1_TIMEOUT:
- DPRINTK("INBOUND_C1_TIMEOUT message received");
- break;
- case BAD_SCSI_FRAME:
- DPRINTK("BAD_SCSI_FRAME message received");
- handle_Bad_SCSI_Frame_interrupt(fi);
- break;
- case INB_SCSI_STATUS_COMPLETION:
- DPRINTK("INB_SCSI_STATUS_COMPL message received");
- handle_Inbound_SCSI_Status_interrupt(fi);
- break;
- case INBOUND_SCSI_COMMAND:
- DPRINTK("INBOUND_SCSI_COMMAND message received");
- handle_Inbound_SCSI_Command_interrupt(fi);
- break;
- case INBOUND_SCSI_DATA_COMPLETION:
- DPRINTK("INBOUND_SCSI_DATA message received");
- /* Only for targets */
- break;
- default:
- T_MSG("DEFAULT message received, type = %x", imq_int_type);
- return;
- }
- reset_latch(fi);
-}
-
-static void handle_OCI_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry;
-u_long transaction_id = 0;
-unsigned short status, seq_count, transmitted_ox_id;
-struct Scsi_Host *host = fi->host;
-struct iph5526_hostdata *hostdata = (struct iph5526_hostdata *)host->hostdata;
-Scsi_Cmnd *Cmnd;
-u_int tag;
-
- ENTER("handle_OCI_interrupt");
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- transaction_id = ntohl(*(ptr_imq_entry + 1));
- status = ntohl(*(ptr_imq_entry + 2)) >> 16;
- seq_count = ntohl(*(ptr_imq_entry + 3));
- DPRINTK("transaction_id= %x", (u_int)transaction_id);
- tag = transaction_id & 0xFFFF0000;
- transmitted_ox_id = transaction_id;
-
- /* The INT could be either due to TIME_OUT | BAD_ALPA.
- * But we check only for TimeOuts. Bad AL_PA will
- * caught by FM_interrupt handler.
- */
-
- if ((status == OCM_TIMEOUT_OR_BAD_ALPA) && (!fi->g.port_discovery) && (!fi->g.perform_adisc)){
- DPRINTK("Frame TimeOut on OX_ID = %x", (u_int)transaction_id);
-
- /* Is it a SCSI frame that is timing out ? Not a very good check...
- */
- if ((transmitted_ox_id <= MAX_SCSI_OXID) && ((tag == FC_SCSI_BAD_TARGET) || (tag < 0x00FF0000))) {
- /* If it is a Bad AL_PA, we report it as BAD_TARGET.
- * Else, we allow the command to time-out. A Link
- * re-initialization could be taking place.
- */
- if (tag == FC_SCSI_BAD_TARGET) {
- Cmnd = hostdata->cmnd_handler[transmitted_ox_id & MAX_SCSI_XID];
- hostdata->cmnd_handler[transmitted_ox_id & MAX_SCSI_XID] = NULL;
- if (Cmnd != NULL) {
- Cmnd->result = DID_BAD_TARGET << 16;
- (*Cmnd->scsi_done) (Cmnd);
- }
- else
- T_MSG("NULL Command out of handler!");
- } /* if Bad Target */
- else {
- u_char missing_target = tag >> 16;
- struct fc_node_info *q = fi->node_info_list;
- /* A Node that we thought was logged in has gone
- * away. We are the optimistic kind and we keep
- * hoping that our dear little Target will come back
- * to us. For now we log him out.
- */
- DPRINTK2("Missing Target = %d", missing_target);
- while (q != NULL) {
- if (q->target_id == missing_target) {
- T_MSG("Target %d Logged out", q->target_id);
- q->login = LOGIN_ATTEMPTED;
- if (fi->num_nodes > 0)
- fi->num_nodes--;
- tx_logi(fi, ELS_PLOGI, q->d_id);
- break;
- }
- else
- q = q->next;
- }
- }
- } /* End of SCSI frame timing out. */
- else {
- if (seq_count > 1) {
- /* An IP frame was transmitted to a Bad AL_PA. Free up
- * the skb used.
- */
- dev_kfree_skb_irq((struct sk_buff *)(bus_to_virt(transaction_id)));
- netif_wake_queue(fi->dev);
- }
- } /* End of IP frame timing out. */
- } /* End of frame timing out. */
- else {
- /* Frame was transmitted successfully. Check if it was an ELS
- * frame or an IP frame or a Bad_Target_Notification frame (in
- * case of a ptp_link). Ugly!
- */
- if ((status == 0) && (seq_count == 0)) {
- u_int tag = transaction_id & 0xFFFF0000;
- /* Continue with port discovery after an ELS is successfully
- * transmitted. (status == 0).
- */
- DPRINTK("tag = %x", tag);
- switch(tag) {
- case ELS_FLOGI:
- /* Letz use the Name Server instead */
- fi->g.explore_fabric = TRUE;
- fi->g.port_discovery = FALSE;
- fi->g.alpa_list_index = MAX_NODES;
- add_to_ox_id_list(fi, transaction_id, tag);
- break;
- case ELS_PLOGI:
- if (fi->g.fabric_present && (fi->g.name_server == FALSE))
- add_to_ox_id_list(fi,transaction_id,ELS_NS_PLOGI);
- else
- add_to_ox_id_list(fi, transaction_id, tag);
- break;
- case FC_SCSI_BAD_TARGET:
- Cmnd = hostdata->cmnd_handler[transmitted_ox_id & MAX_SCSI_XID];
- hostdata->cmnd_handler[transmitted_ox_id & MAX_SCSI_XID] = NULL;
- if (Cmnd != NULL) {
- Cmnd->result = DID_BAD_TARGET << 16;
- (*Cmnd->scsi_done) (Cmnd);
- }
- else
- T_MSG("NULL Command out of handler!");
- break;
- default:
- add_to_ox_id_list(fi, transaction_id, tag);
- }
-
- if (fi->g.alpa_list_index >= MAX_NODES) {
- if (fi->g.port_discovery == TRUE) {
- fi->g.port_discovery = FALSE;
- add_display_cache_timer(fi);
- }
- fi->g.alpa_list_index = MAX_NODES;
- }
- if (fi->g.port_discovery == TRUE)
- local_port_discovery(fi);
- }
- else {
- /* An IP frame has been successfully transmitted.
- * Free the skb that was used for this IP frame.
- */
- if ((status == 0) && (seq_count > 1)) {
- dev_kfree_skb_irq((struct sk_buff *)(bus_to_virt(transaction_id)));
- netif_wake_queue(fi->dev);
- }
- }
- }
- LEAVE("handle_OCI_interrupt");
-}
-
-/* Right now we discard OOO frames */
-static void handle_OOO_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry;
-int queue_indx, offset, payload_size;
-int no_of_buffers = 1; /* header is in a separate buffer */
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- offset = ntohl(*(ptr_imq_entry + 1)) & 0x00000007;
- queue_indx = ntohl(*(ptr_imq_entry + 1)) & 0xFFFF0000;
- queue_indx = queue_indx >> 16;
- payload_size = ntohl(*(ptr_imq_entry + 2)) - TACHYON_HEADER_LEN;
- /* Calculate total number of buffers */
- no_of_buffers += payload_size / MFS_BUFFER_SIZE;
- if (payload_size % MFS_BUFFER_SIZE)
- no_of_buffers++;
-
- /* provide Tachyon will another set of buffers */
- fi->g.mfs_buffer_count += no_of_buffers;
- if (fi->g.mfs_buffer_count >= NO_OF_ENTRIES) {
- int count = fi->g.mfs_buffer_count / NO_OF_ENTRIES;
- fi->g.mfs_buffer_count -= NO_OF_ENTRIES * count;
- update_MFSBQ_indx(fi, count);
- }
-}
-
-static void handle_MFS_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry, *buff_addr;
-u_int type_of_frame, s_id;
-int queue_indx, offset, payload_size, starting_indx, starting_offset;
-u_short received_ox_id;
-int no_of_buffers = 1; /* header is in a separate buffer */
-struct sk_buff *skb;
-int wrap_around = FALSE, no_of_wrap_buffs = NO_OF_ENTRIES - 1;
- ENTER("handle_MFS_interrupt");
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- offset = ntohl(*(ptr_imq_entry + 1)) & 0x00000007;
- queue_indx = ntohl(*(ptr_imq_entry + 1)) & 0xFFFF0000;
- queue_indx = queue_indx >> 16;
- DPRINTK("queue_indx = %d, offset = %d\n", queue_indx, offset);
- payload_size = ntohl(*(ptr_imq_entry + 2)) - TACHYON_HEADER_LEN;
- DPRINTK("payload_size = %d", payload_size);
- /* Calculate total number of buffers */
- no_of_buffers += payload_size / MFS_BUFFER_SIZE;
- if (payload_size % MFS_BUFFER_SIZE)
- no_of_buffers++;
- DPRINTK("no_of_buffers = %d", no_of_buffers);
-
- if ((no_of_buffers - 1) <= offset) {
- starting_offset = offset - (no_of_buffers - 1);
- starting_indx = queue_indx;
- }
- else {
- int temp = no_of_buffers - (offset + 1);
- int no_of_queues = temp / NO_OF_ENTRIES;
- starting_offset = temp % NO_OF_ENTRIES;
- if (starting_offset != 0) {
- no_of_wrap_buffs = starting_offset - 1; //exclude header
- starting_offset = NO_OF_ENTRIES - starting_offset;
- no_of_queues++;
- }
- starting_indx = queue_indx - no_of_queues;
- if (starting_indx < 0) {
- no_of_wrap_buffs -= (starting_indx + 1) * NO_OF_ENTRIES;
- starting_indx = MFSBQ_LENGTH + starting_indx;
- wrap_around = TRUE;
- }
- }
-
- DPRINTK("starting_indx = %d, starting offset = %d no_of_wrap_buffs = %d\n", starting_indx, starting_offset, no_of_wrap_buffs);
- /* Get Tachyon Header from first buffer */
- buff_addr = bus_to_virt(ntohl(*(fi->q.ptr_mfsbq_base + starting_indx*NO_OF_ENTRIES + starting_offset)));
-
-
- /* extract Type of Frame */
- type_of_frame = (u_int)ntohl(*(buff_addr + 4)) & 0xFF000000;
- s_id = (u_int)ntohl(*(buff_addr + 3)) & 0x00FFFFFF;
- received_ox_id = ntohl(*(buff_addr + 6)) >> 16;
- buff_addr += MFS_BUFFER_SIZE/4;
- DPRINTK("type_of_frame = %x, s_id = %x, ox_id = %x", type_of_frame, s_id, received_ox_id);
-
- switch(type_of_frame) {
- case TYPE_LLC_SNAP:
- skb = dev_alloc_skb(payload_size);
- if (skb == NULL) {
- printk(KERN_NOTICE "%s: In handle_MFS_interrupt() Memory squeeze, dropping packet.\n", fi->name);
- fi->fc_stats.rx_dropped++;
- fi->g.mfs_buffer_count += no_of_buffers;
- if (fi->g.mfs_buffer_count >= NO_OF_ENTRIES) {
- int count = fi->g.mfs_buffer_count / NO_OF_ENTRIES;
- fi->g.mfs_buffer_count -= NO_OF_ENTRIES * count;
- update_MFSBQ_indx(fi, count);
- }
- return;
- }
- if (wrap_around) {
- int wrap_size = no_of_wrap_buffs * MFS_BUFFER_SIZE;
- int tail_size = payload_size - wrap_size;
- DPRINTK("wrap_size = %d, tail_size = %d\n", wrap_size, tail_size);
- if (no_of_wrap_buffs)
- memcpy(skb_put(skb, wrap_size), buff_addr, wrap_size);
- buff_addr = bus_to_virt(ntohl(*(fi->q.ptr_mfsbq_base)));
- memcpy(skb_put(skb, tail_size), buff_addr, tail_size);
- }
- else
- memcpy(skb_put(skb, payload_size), buff_addr, payload_size);
- rx_net_mfs_packet(fi, skb);
- break;
- default:
- T_MSG("Unknown Frame Type received. Type = %x", type_of_frame);
- }
-
- /* provide Tachyon will another set of buffers */
- fi->g.mfs_buffer_count += no_of_buffers;
- if (fi->g.mfs_buffer_count >= NO_OF_ENTRIES) {
- int count = fi->g.mfs_buffer_count / NO_OF_ENTRIES;
- fi->g.mfs_buffer_count -= NO_OF_ENTRIES * count;
- update_MFSBQ_indx(fi, count);
- }
- LEAVE("handle_MFS_interrupt");
-}
-
-static void handle_Unknown_Frame_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry;
-int queue_indx, offset;
- ENTER("handle_Unknown_Frame_interrupt");
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- offset = ntohl(*(ptr_imq_entry + 1)) & 0x00000007;
- queue_indx = ntohl(*(ptr_imq_entry + 1)) & 0xFFFF0000;
- queue_indx = queue_indx >> 16;
- /* We discard the "unknown" frame */
- /* provide Tachyon will another set of buffers */
- if (offset == (NO_OF_ENTRIES - 1))
- update_SFSBQ_indx(fi);
- LEAVE("handle_Unknown_Frame_interrupt");
-}
-
-static void handle_Busied_Frame_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry;
-int queue_indx, offset;
- ENTER("handle_Busied_Frame_interrupt");
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- offset = ntohl(*(ptr_imq_entry + 1)) & 0x00000007;
- queue_indx = ntohl(*(ptr_imq_entry + 1)) & 0xFFFF0000;
- queue_indx = queue_indx >> 16;
- /* We discard the "busied" frame */
- /* provide Tachyon will another set of buffers */
- if (offset == (NO_OF_ENTRIES - 1))
- update_SFSBQ_indx(fi);
- LEAVE("handle_Busied_Frame_interrupt");
-}
-
-static void handle_Bad_SCSI_Frame_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry, *buff_addr, *tach_header, *ptr_edb;
-u_int s_id, rctl, frame_class, burst_len, transfered_len, len = 0;
-int queue_indx, offset, payload_size, i;
-u_short ox_id, rx_id, x_id, mtu = 512;
-u_char target_id = 0xFF;
-
- ENTER("handle_Bad_SCSI_Frame_interrupt");
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- offset = ntohl(*(ptr_imq_entry + 1)) & 0x00000007;
- queue_indx = ntohl(*(ptr_imq_entry + 1)) & 0xFFFF0000;
- queue_indx = queue_indx >> 16;
- payload_size = ntohl(*(ptr_imq_entry + 2));
-
- buff_addr = bus_to_virt(ntohl(*(fi->q.ptr_sfsbq_base + queue_indx*NO_OF_ENTRIES + offset)));
-
- rctl = ntohl(*(buff_addr + 2)) & 0xFF000000;
- s_id = ntohl(*(buff_addr + 3)) & 0x00FFFFFF;
- ox_id = ntohl(*(buff_addr + 6)) >> 16;
- rx_id = ntohl(*(buff_addr + 6));
- x_id = ox_id & MAX_SCSI_XID;
-
- /* Any frame that comes in with OX_ID that matches an OX_ID
- * that has been allocated for SCSI, will be called a Bad
- * SCSI frame if the Exchange is not valid any more.
- *
- * We will also get a Bad SCSI frame interrupt if we receive
- * a XFER_RDY with offset != 0. Tachyon washes its hands off
- * this Exchange. We have to take care of ourselves. Grrr...
- */
- if (rctl == DATA_DESCRIPTOR) {
- struct fc_node_info *q = fi->node_info_list;
- while (q != NULL) {
- if (q->d_id == s_id) {
- target_id = q->target_id;
- mtu = q->mtu;
- break;
- }
- else
- q = q->next;
- }
- frame_class = target_id;
- transfered_len = ntohl(*(buff_addr + 8));
- burst_len = ntohl(*(buff_addr + 9));
-
- build_ODB(fi, fi->g.seq_id, s_id, burst_len, 0, mtu, ox_id, rx_id, 0, 0, frame_class << 16);
- /* Update the SEQ_ID and Relative Offset in the
- * Tachyon Header Structure.
- */
- tach_header = bus_to_virt(ntohl(*(fi->q.ptr_sest[x_id] + 5)));
- *(tach_header + 5) = htonl(fi->g.seq_id << 24);
- *(tach_header + 7) = htonl(transfered_len);
- fi->g.odb.hdr_addr = *(fi->q.ptr_sest[x_id] + 5);
-
- /* Invalidate the EDBs used
- */
- ptr_edb = bus_to_virt(ntohl(*(fi->q.ptr_sest[x_id] + 7)));
-
- for (i = 0; i < EDB_LEN; i++)
- if (fi->q.ptr_edb[i] == ptr_edb)
- break;
- ptr_edb--;
-
- if (i < EDB_LEN) {
- int j;
- do {
- ptr_edb += 2;
- len += (htonl(*ptr_edb) & 0xFFFF);
- j = i;
- fi->q.free_edb_list[i++] = EDB_FREE;
- if (i == EDB_LEN) {
- i = 0;
- ptr_edb = fi->q.ptr_edb_base - 1;
- }
- } while (len < transfered_len);
- if (len > transfered_len) {
- ptr_edb--;
- fi->q.free_edb_list[j] = EDB_BUSY;
- }
- else
- ptr_edb++;
- }
- else {
- T_MSG("EDB not found while freeing");
- if (offset == (NO_OF_ENTRIES - 1))
- update_SFSBQ_indx(fi);
- return;
- }
-
- /* Update the EDB pointer in the ODB.
- */
- fi->g.odb.edb_addr = htonl(virt_to_bus(ptr_edb));
- memcpy(fi->q.ptr_odb[fi->q.ocq_prod_indx], &(fi->g.odb), sizeof(ODB));
- /* Update the EDB pointer in the SEST entry. We might need
- * this if get another XFER_RDY for the same Exchange.
- */
- *(fi->q.ptr_sest[x_id] + 7) = htonl(virt_to_bus(ptr_edb));
-
- update_OCQ_indx(fi);
- if (fi->g.seq_id == MAX_SEQ_ID)
- fi->g.seq_id = 0;
- else
- fi->g.seq_id++;
- }
- else
- /* Could be a BA_ACC or a BA_RJT.
- */
- if (rctl == RCTL_BASIC_ACC) {
- u_int bls_type = remove_from_ox_id_list(fi, ox_id);
- DPRINTK1("BA_ACC received from S_ID 0x%x with OX_ID = %x in response to %x", s_id, ox_id, bls_type);
- if (bls_type == RCTL_BASIC_ABTS) {
- u_int STE_bit;
- /* Invalidate resources for that Exchange.
- */
- STE_bit = ntohl(*fi->q.ptr_sest[x_id]);
- if (STE_bit & SEST_V) {
- *(fi->q.ptr_sest[x_id]) &= htonl(SEST_INV);
- invalidate_SEST_entry(fi, ox_id);
- }
- }
- }
- else
- if (rctl == RCTL_BASIC_RJT) {
- u_int bls_type = remove_from_ox_id_list(fi, ox_id);
- DPRINTK1("BA_RJT received from S_ID 0x%x with OX_ID = %x in response to %x", s_id, ox_id, bls_type);
- if (bls_type == RCTL_BASIC_ABTS) {
- u_int STE_bit;
- /* Invalidate resources for that Exchange.
- */
- STE_bit = ntohl(*fi->q.ptr_sest[x_id]);
- if (STE_bit & SEST_V) {
- *(fi->q.ptr_sest[x_id]) &= htonl(SEST_INV);
- invalidate_SEST_entry(fi, ox_id);
- }
- }
- }
- else
- DPRINTK1("Frame with R_CTL = %x received from S_ID 0x%x with OX_ID %x", rctl, s_id, ox_id);
-
- /* Else, discard the "Bad" SCSI frame.
- */
-
- /* provide Tachyon will another set of buffers
- */
- if (offset == (NO_OF_ENTRIES - 1))
- update_SFSBQ_indx(fi);
- LEAVE("handle_Bad_SCSI_Frame_interrupt");
-}
-
-static void handle_Inbound_SCSI_Status_interrupt(struct fc_info *fi)
-{
-struct Scsi_Host *host = fi->host;
-struct iph5526_hostdata *hostdata = (struct iph5526_hostdata *)host->hostdata;
-u_int *ptr_imq_entry, *buff_addr, *ptr_rsp_info, *ptr_sense_info = NULL;
-int queue_indx, offset, payload_size;
-u_short received_ox_id, x_id;
-Scsi_Cmnd *Cmnd;
-u_int fcp_status, fcp_rsp_info_len = 0, fcp_sense_info_len = 0, s_id;
- ENTER("handle_SCSI_status_interrupt");
-
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- offset = ntohl(*(ptr_imq_entry + 1)) & 0x00000007;
- queue_indx = ntohl(*(ptr_imq_entry + 1)) & 0xFFFF0000;
- queue_indx = queue_indx >> 16;
- buff_addr = bus_to_virt(ntohl(*(fi->q.ptr_sfsbq_base + queue_indx*NO_OF_ENTRIES + offset)));
- payload_size = ntohl(*(ptr_imq_entry + 2));
- received_ox_id = ntohl(*(buff_addr + 6)) >> 16;
-
- buff_addr = bus_to_virt(ntohl(*(fi->q.ptr_sfsbq_base + queue_indx*NO_OF_ENTRIES + offset)));
-
- fcp_status = ntohl(*(buff_addr + 10));
- ptr_rsp_info = buff_addr + 14;
- if (fcp_status & FCP_STATUS_RSP_LEN)
- fcp_rsp_info_len = ntohl(*(buff_addr + 13));
-
- if (fcp_status & FCP_STATUS_SENSE_LEN) {
- ptr_sense_info = ptr_rsp_info + fcp_rsp_info_len / 4;
- fcp_sense_info_len = ntohl(*(buff_addr + 12));
- DPRINTK("sense_info = %x", (u_int)ntohl(*ptr_sense_info));
- }
- DPRINTK("fcp_status = %x, fcp_rsp_len = %x", fcp_status, fcp_rsp_info_len);
- x_id = received_ox_id & MAX_SCSI_XID;
- Cmnd = hostdata->cmnd_handler[x_id];
- hostdata->cmnd_handler[x_id] = NULL;
- if (Cmnd != NULL) {
- memset(Cmnd->sense_buffer, 0, sizeof(Cmnd->sense_buffer));
- /* Check if there is a Sense field */
- if (fcp_status & FCP_STATUS_SENSE_LEN) {
- int size = sizeof(Cmnd->sense_buffer);
- if (fcp_sense_info_len < size)
- size = fcp_sense_info_len;
- memcpy(Cmnd->sense_buffer, (char *)ptr_sense_info, size);
- }
- Cmnd->result = fcp_status & FCP_STATUS_MASK;
- (*Cmnd->scsi_done) (Cmnd);
- }
- else
- T_MSG("NULL Command out of handler!");
-
- invalidate_SEST_entry(fi, received_ox_id);
- s_id = ntohl(*(buff_addr + 3)) & 0x00FFFFFF;
- fi->q.free_scsi_oxid[x_id] = OXID_AVAILABLE;
-
- /* provide Tachyon will another set of buffers */
- if (offset == (NO_OF_ENTRIES - 1))
- update_SFSBQ_indx(fi);
- LEAVE("handle_SCSI_status_interrupt");
-}
-
-static void invalidate_SEST_entry(struct fc_info *fi, u_short received_ox_id)
-{
-u_short x_id = received_ox_id & MAX_SCSI_XID;
- /* Invalidate SEST entry if it is an OutBound SEST Entry
- */
- if (!(received_ox_id & SCSI_READ_BIT)) {
- u_int *ptr_tach_header, *ptr_edb;
- u_short temp_ox_id = NOT_SCSI_XID;
- int i;
- *(fi->q.ptr_sest[x_id]) &= htonl(SEST_INV);
-
- /* Invalidate the Tachyon Header structure
- */
- ptr_tach_header = bus_to_virt(ntohl(*(fi->q.ptr_sest[x_id] + 5)));
- for (i = 0; i < NO_OF_TACH_HEADERS; i++)
- if(fi->q.ptr_tachyon_header[i] == ptr_tach_header)
- break;
- if (i < NO_OF_TACH_HEADERS)
- memset(ptr_tach_header, 0xFF, 32);
- else
- T_MSG("Tachyon Header not found while freeing in invalidate_SEST_entry()");
-
- /* Invalidate the EDB used
- */
- ptr_edb = bus_to_virt(ntohl(*(fi->q.ptr_sest[x_id] + 7)));
- for (i = 0; i < EDB_LEN; i++)
- if (fi->q.ptr_edb[i] == ptr_edb)
- break;
- ptr_edb--;
- if (i < EDB_LEN) {
- do {
- ptr_edb += 2;
- fi->q.free_edb_list[i++] = EDB_FREE;
- if (i == EDB_LEN) {
- i = 0;
- ptr_edb = fi->q.ptr_edb_base - 1;
- }
- } while ((htonl(*ptr_edb) & 0x80000000) != 0x80000000);
- }
- else
- T_MSG("EDB not found while freeing in invalidate_SEST_entry()");
-
- /* Search for its other header structure and destroy it!
- */
- if ((ptr_tach_header + 16) < (fi->q.ptr_tachyon_header_base + (MY_PAGE_SIZE/4)))
- ptr_tach_header += 16;
- else
- ptr_tach_header = fi->q.ptr_tachyon_header_base;
- while (temp_ox_id != x_id) {
- temp_ox_id = ntohl(*(ptr_tach_header + 6)) >> 16;
- if (temp_ox_id == x_id) {
- /* Paranoid checking...
- */
- for (i = 0; i < NO_OF_TACH_HEADERS; i++)
- if(fi->q.ptr_tachyon_header[i] == ptr_tach_header)
- break;
- if (i < NO_OF_TACH_HEADERS)
- memset(ptr_tach_header, 0xFF, 32);
- else
- T_MSG("Tachyon Header not found while freeing in invalidate_SEST_entry()");
- break;
- }
- else {
- if ((ptr_tach_header + 16) < (fi->q.ptr_tachyon_header_base + (MY_PAGE_SIZE/4)))
- ptr_tach_header += 16;
- else
- ptr_tach_header = fi->q.ptr_tachyon_header_base;
- }
- }
- }
- else {
- u_short sdb_table_indx;
- /* An Inbound Command has completed or needs to be Aborted.
- * Clear up the SDB buffers.
- */
- sdb_table_indx = *(fi->q.ptr_sest[x_id] + 5);
- fi->q.sdb_slot_status[sdb_table_indx] = SDB_FREE;
- }
-}
-
-static void handle_Inbound_SCSI_Command_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry;
-int queue_indx, offset;
- ENTER("handle_Inbound_SCSI_Command_interrupt");
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- offset = ntohl(*(ptr_imq_entry + 1)) & 0x00000007;
- queue_indx = ntohl(*(ptr_imq_entry + 1)) & 0xFFFF0000;
- queue_indx = queue_indx >> 16;
- /* We discard the SCSI frame as we shouldn't be receiving
- * a SCSI Command in the first place
- */
- /* provide Tachyon will another set of buffers */
- if (offset == (NO_OF_ENTRIES - 1))
- update_SFSBQ_indx(fi);
- LEAVE("handle_Inbound_SCSI_Command_interrupt");
-}
-
-static void handle_SFS_interrupt(struct fc_info *fi)
-{
-u_int *ptr_imq_entry, *buff_addr;
-u_int class_of_frame, type_of_frame, s_id, els_type = 0, rctl;
-int queue_indx, offset, payload_size, login_state;
-u_short received_ox_id, fs_cmnd_code;
- ENTER("handle_SFS_interrupt");
- ptr_imq_entry = fi->q.ptr_imqe[fi->q.imq_cons_indx];
- offset = ntohl(*(ptr_imq_entry + 1)) & 0x00000007;
- queue_indx = ntohl(*(ptr_imq_entry + 1)) & 0xFFFF0000;
- queue_indx = queue_indx >> 16;
- DPRINTK("queue_indx = %d, offset = %d\n", queue_indx, offset);
- payload_size = ntohl(*(ptr_imq_entry + 2));
- DPRINTK("payload_size = %d", payload_size);
-
- buff_addr = bus_to_virt(ntohl(*(fi->q.ptr_sfsbq_base + queue_indx*NO_OF_ENTRIES + offset)));
-
- /* extract Type of Frame */
- type_of_frame = ntohl(*(buff_addr + 4)) & 0xFF000000;
- s_id = ntohl(*(buff_addr + 3)) & 0x00FFFFFF;
- received_ox_id = ntohl(*(buff_addr + 6)) >> 16;
- switch(type_of_frame) {
- case TYPE_BLS:
- rctl = ntohl(*(buff_addr + 2)) & 0xFF000000;
- switch(rctl) {
- case RCTL_BASIC_ABTS:
- /* As an Initiator, we should never be receiving
- * this.
- */
- DPRINTK1("ABTS received from S_ID 0x%x with OX_ID = %x", s_id, received_ox_id);
- break;
- }
- break;
- case TYPE_ELS:
- class_of_frame = ntohl(*(buff_addr + 8));
- login_state = sid_logged_in(fi, s_id);
- switch(class_of_frame & 0xFF000000) {
- case ELS_PLOGI:
- if (s_id != fi->g.my_id) {
- u_int ret_code;
- DPRINTK1("PLOGI received from D_ID 0x%x with 0X_ID = %x", s_id, received_ox_id);
- if ((ret_code = plogi_ok(fi, buff_addr, payload_size)) == 0){
- tx_logi_acc(fi, ELS_ACC, s_id, received_ox_id);
- add_to_address_cache(fi, buff_addr);
- }
- else {
- u_short cmnd_code = ret_code >> 16;
- u_short expln_code = ret_code;
- tx_ls_rjt(fi, s_id, received_ox_id, cmnd_code, expln_code);
- }
- }
- break;
- case ELS_ACC:
- els_type = remove_from_ox_id_list(fi, received_ox_id);
- DPRINTK1("ELS_ACC received from D_ID 0x%x in response to ELS %x", s_id, els_type);
- switch(els_type) {
- case ELS_PLOGI:
- add_to_address_cache(fi, buff_addr);
- tx_prli(fi, ELS_PRLI, s_id, OX_ID_FIRST_SEQUENCE);
- break;
- case ELS_FLOGI:
- add_to_address_cache(fi, buff_addr);
- fi->g.my_id = ntohl(*(buff_addr + 2)) & 0x00FFFFFF;
- fi->g.fabric_present = TRUE;
- fi->g.my_ddaa = fi->g.my_id & 0xFFFF00;
- /* Login to the Name Server
- */
- tx_logi(fi, ELS_PLOGI, DIRECTORY_SERVER);
- break;
- case ELS_NS_PLOGI:
- fi->g.name_server = TRUE;
- add_to_address_cache(fi, buff_addr);
- tx_name_server_req(fi, FCS_RFC_4);
- tx_scr(fi);
- /* Some devices have a delay before
- * registering with the Name Server
- */
- udelay(500);
- tx_name_server_req(fi, FCS_GP_ID4);
- break;
- case ELS_PRLI:
- mark_scsi_sid(fi, buff_addr, ADD_ENTRY);
- break;
- case ELS_ADISC:
- if (!(validate_login(fi, buff_addr)))
- tx_logo(fi, s_id, OX_ID_FIRST_SEQUENCE);
- break;
- }
- break;
- case ELS_PDISC:
- DPRINTK1("ELS_PDISC received from D_ID 0x%x", s_id);
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_ADISC:
- DPRINTK1("ELS_ADISC received from D_ID 0x%x", s_id);
- if (node_logged_in_prev(fi, buff_addr))
- tx_adisc(fi, ELS_ACC, s_id, received_ox_id);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_PRLI:
- DPRINTK1("ELS_PRLI received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN)) {
- tx_prli(fi, ELS_ACC, s_id, received_ox_id);
- mark_scsi_sid(fi, buff_addr, ADD_ENTRY);
- }
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_PRLO:
- DPRINTK1("ELS_PRLO received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_OUT) || (login_state == NODE_NOT_PRESENT))
- tx_logo(fi, s_id, received_ox_id);
- else
- if (login_state == NODE_LOGGED_IN)
-
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- if (login_state == NODE_PROCESS_LOGGED_IN) {
- tx_prli(fi, ELS_ACC, s_id, received_ox_id);
- mark_scsi_sid(fi, buff_addr, DELETE_ENTRY);
- }
- break;
- case ELS_LS_RJT:
- els_type = remove_from_ox_id_list(fi, received_ox_id);
- DPRINTK1("ELS_LS_RJT received from D_ID 0x%x in response to %x", s_id, els_type);
- /* We should be chking the reason code.
- */
- switch (els_type) {
- case ELS_ADISC:
- tx_logi(fi, ELS_PLOGI, s_id);
- break;
- }
- break;
- case ELS_LOGO:
- els_type = remove_from_ox_id_list(fi, received_ox_id);
- DPRINTK1("ELS_LOGO received from D_ID 0x%x in response to %x", s_id, els_type);
- remove_from_address_cache(fi, buff_addr, ELS_LOGO);
- tx_acc(fi, s_id, received_ox_id);
- if (els_type == ELS_ADISC)
- tx_logi(fi, ELS_PLOGI, s_id);
- break;
- case ELS_RSCN:
- DPRINTK1("ELS_RSCN received from D_ID 0x%x", s_id);
- tx_acc(fi, s_id, received_ox_id);
- remove_from_address_cache(fi, buff_addr, ELS_RSCN);
- break;
- case ELS_FARP_REQ:
- /* We do not support FARP.
- So, silently discard it */
- DPRINTK1("ELS_FARP_REQ received from D_ID 0x%x", s_id);
- break;
- case ELS_ABTX:
- DPRINTK1("ELS_ABTX received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_FLOGI:
- DPRINTK1("ELS_FLOGI received from D_ID 0x%x", s_id);
- if (fi->g.ptp_up == TRUE) {
- /* The node could have come up as an N_Port
- * in a Loop! So,try initializing as an NL_port
- */
- take_tachyon_offline(fi);
- /* write AL_TIME & E_D_TOV into the registers */
- writel(TOV_VALUES, fi->t_r.ptr_fm_tov_reg);
- writel(LOOP_INIT_SOFT_ADDRESS, fi->t_r.ptr_fm_config_reg);
- DPRINTK1("FLOGI received, TACHYON initializing as L_Port...\n");
- writel(INITIALIZE, fi->t_r.ptr_fm_control_reg);
- }
- else {
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- }
- break;
- case ELS_ADVC:
- DPRINTK1("ELS_ADVC received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_ECHO:
- DPRINTK1("ELS_ECHO received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_ESTC:
- DPRINTK1("ELS_ESTC received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_ESTS:
- DPRINTK1("ELS_ESTS received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_RCS:
- DPRINTK1("ELS_RCS received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_RES:
- DPRINTK1("ELS_RES received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_RLS:
- DPRINTK1("ELS_RLS received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_RRQ:
- DPRINTK1("ELS_RRQ received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_RSS:
- DPRINTK1("ELS_RSS received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_RTV:
- DPRINTK1("ELS_RTV received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_RSI:
- DPRINTK1("ELS_RSI received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_TEST:
- /* No reply sequence */
- DPRINTK1("ELS_TEST received from D_ID 0x%x", s_id);
- break;
- case ELS_RNC:
- DPRINTK1("ELS_RNC received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_RVCS:
- DPRINTK1("ELS_RVCS received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_TPLS:
- DPRINTK1("ELS_TPLS received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_GAID:
- DPRINTK1("ELS_GAID received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_FACT:
- DPRINTK1("ELS_FACT received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_FAN:
- /* Hmmm... You don't support FAN ??? */
- DPRINTK1("ELS_FAN received from D_ID 0x%x", s_id);
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- break;
- case ELS_FDACT:
- DPRINTK1("ELS_FDACT received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_NACT:
- DPRINTK1("ELS_NACT received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_NDACT:
- DPRINTK1("ELS_NDACT received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_QoSR:
- DPRINTK1("ELS_QoSR received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- case ELS_FDISC:
- DPRINTK1("ELS_FDISC received from D_ID 0x%x", s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- default:
- DPRINTK1("ELS Frame %x received from D_ID 0x%x", class_of_frame, s_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN))
- tx_ls_rjt(fi, s_id, received_ox_id, CMND_NOT_SUPP, NO_EXPLN);
- else
- tx_logo(fi, s_id, received_ox_id);
- break;
- }
- break;
- case TYPE_FC_SERVICES:
- fs_cmnd_code = (ntohl(*(buff_addr + 10)) & 0xFFFF0000) >>16;
- switch(fs_cmnd_code) {
- case FCS_ACC:
- els_type = remove_from_ox_id_list(fi, received_ox_id);
- DPRINTK1("FCS_ACC received from D_ID 0x%x in response to %x", s_id, els_type);
- if (els_type == FCS_GP_ID4)
- explore_fabric(fi, buff_addr);
- break;
- case FCS_REJECT:
- DPRINTK1("FCS_REJECT received from D_ID 0x%x in response to %x", s_id, els_type);
- break;
- }
- break;
- case TYPE_LLC_SNAP:
- rx_net_packet(fi, (u_char *)buff_addr, payload_size);
- break;
- default:
- T_MSG("Frame Type %x received from %x", type_of_frame, s_id);
- }
-
- /* provide Tachyon will another set of buffers */
- if (offset == (NO_OF_ENTRIES - 1))
- update_SFSBQ_indx(fi);
- LEAVE("handle_SFS_interrupt");
-}
-
-static void handle_FM_interrupt(struct fc_info *fi)
-{
-u_int fm_status;
-u_int tachyon_status;
-
- ENTER("handle_FM_interrupt");
- fm_status = readl(fi->t_r.ptr_fm_status_reg);
- tachyon_status = readl(fi->t_r.ptr_tach_status_reg);
- DPRINTK("FM_status = %x, Tachyon_status = %x", fm_status, tachyon_status);
- if (fm_status & LINK_DOWN) {
- T_MSG("Fibre Channel Link DOWN");
- fm_status = readl(fi->t_r.ptr_fm_status_reg);
-
- del_timer(&fi->explore_timer);
- del_timer(&fi->nport_timer);
- del_timer(&fi->lport_timer);
- del_timer(&fi->display_cache_timer);
- fi->g.link_up = FALSE;
- if (fi->g.ptp_up == TRUE)
- fi->g.n_port_try = FALSE;
- fi->g.ptp_up = FALSE;
- fi->g.port_discovery = FALSE;
- fi->g.explore_fabric = FALSE;
- fi->g.perform_adisc = FALSE;
-
- /* Logout will all nodes */
- if (fi->node_info_list) {
- struct fc_node_info *temp_list = fi->node_info_list;
- while(temp_list) {
- temp_list->login = LOGIN_ATTEMPTED;
- temp_list = temp_list->next;
- }
- fi->num_nodes = 0;
- }
-
- if ((fi->g.n_port_try == FALSE) && (fi->g.dont_init == FALSE)){
- take_tachyon_offline(fi);
- /* write AL_TIME & E_D_TOV into the registers */
- writel(TOV_VALUES, fi->t_r.ptr_fm_tov_reg);
-
- if ((fi->g.fabric_present == TRUE) && (fi->g.loop_up == TRUE)) {
- u_int al_pa = fi->g.my_id & 0xFF;
- writel((al_pa << 24) | LOOP_INIT_FABRIC_ADDRESS | LOOP_INIT_PREVIOUS_ADDRESS, fi->t_r.ptr_fm_config_reg);
- }
- else
- if (fi->g.loop_up == TRUE) {
- u_int al_pa = fi->g.my_id & 0xFF;
- writel((al_pa << 24) | LOOP_INIT_PREVIOUS_ADDRESS, fi->t_r.ptr_fm_config_reg);
- }
- else
- writel(LOOP_INIT_SOFT_ADDRESS, fi->t_r.ptr_fm_config_reg);
- fi->g.loop_up = FALSE;
- DPRINTK1("In LDWN TACHYON initializing as L_Port...\n");
- writel(INITIALIZE, fi->t_r.ptr_fm_control_reg);
- }
- }
-
- if (fm_status & NON_PARTICIPATING) {
- T_MSG("Did not acquire an AL_PA. I am not participating");
- }
- else
- if ((fm_status & LINK_UP) && ((fm_status & LINK_DOWN) == 0)) {
- T_MSG("Fibre Channel Link UP");
- if ((fm_status & NON_PARTICIPATING) != TRUE) {
- fi->g.link_up = TRUE;
- if (tachyon_status & OSM_FROZEN) {
- reset_tachyon(fi, ERROR_RELEASE);
- reset_tachyon(fi, OCQ_RESET);
- }
- init_timer(&fi->explore_timer);
- init_timer(&fi->nport_timer);
- init_timer(&fi->lport_timer);
- init_timer(&fi->display_cache_timer);
- if ((fm_status & OLD_PORT) == 0) {
- fi->g.loop_up = TRUE;
- fi->g.ptp_up = FALSE;
- fi->g.my_id = readl(fi->t_r.ptr_fm_config_reg) >> 24;
- DPRINTK1("My AL_PA = %x", fi->g.my_id);
- fi->g.port_discovery = TRUE;
- fi->g.explore_fabric = FALSE;
- }
- else
- if (((fm_status & 0xF0) == OLD_PORT) && ((fm_status & 0x0F) == PORT_STATE_ACTIVE)) {
- fi->g.loop_up = FALSE;
- fi->g.my_id = 0x0;
- /* In a point-to-point configuration, we expect to be
- * connected to an F_Port. This driver does not yet support
- * a configuration where it is connected to another N_Port
- * directly.
- */
- fi->g.explore_fabric = TRUE;
- fi->g.port_discovery = FALSE;
- if (fi->g.n_port_try == FALSE) {
- take_tachyon_offline(fi);
- /* write R_T_TOV & E_D_TOV into the registers */
- writel(PTP_TOV_VALUES, fi->t_r.ptr_fm_tov_reg);
- writel(BB_CREDIT | NPORT, fi->t_r.ptr_fm_config_reg);
- fi->g.n_port_try = TRUE;
- DPRINTK1("In LUP TACHYON initializing as N_Port...\n");
- writel(INITIALIZE, fi->t_r.ptr_fm_control_reg);
- }
- else {
- fi->g.ptp_up = TRUE;
- tx_logi(fi, ELS_FLOGI, F_PORT);
- }
- }
- fi->g.my_ddaa = 0x0;
- fi->g.fabric_present = FALSE;
- /* We havn't sent out any Name Server Reqs */
- fi->g.name_server = FALSE;
- fi->g.alpa_list_index = 0;
- fi->g.ox_id = NOT_SCSI_XID;
- fi->g.my_mtu = TACH_FRAME_SIZE;
-
- /* Implicitly LOGO with all logged-in nodes.
- */
- if (fi->node_info_list) {
- struct fc_node_info *temp_list = fi->node_info_list;
- while(temp_list) {
- temp_list->login = LOGIN_ATTEMPTED;
- temp_list = temp_list->next;
- }
- fi->num_nodes = 0;
- fi->g.perform_adisc = TRUE;
- //fi->g.perform_adisc = FALSE;
- fi->g.port_discovery = FALSE;
- tx_logi(fi, ELS_FLOGI, F_PORT);
- }
- else {
- /* If Link coming up for the _first_ time or no nodes
- * were logged in before...
- */
- fi->g.scsi_oxid = 0;
- fi->g.seq_id = 0x00;
- fi->g.perform_adisc = FALSE;
- }
-
- /* reset OX_ID table */
- while (fi->ox_id_list) {
- struct ox_id_els_map *temp = fi->ox_id_list;
- fi->ox_id_list = fi->ox_id_list->next;
- kfree(temp);
- }
- fi->ox_id_list = NULL;
- } /* End of if partipating */
- }
-
- if (fm_status & ELASTIC_STORE_ERROR) {
- /* Too much junk on the Link
- */
- /* Trying to clear it up by Txing PLOGI to urself */
- if (fi->g.link_up == TRUE)
- tx_logi(fi, ELS_PLOGI, fi->g.my_id);
- }
-
- if (fm_status & LOOP_UP) {
- if (tachyon_status & OSM_FROZEN) {
- reset_tachyon(fi, ERROR_RELEASE);
- reset_tachyon(fi, OCQ_RESET);
- }
- }
-
- if (fm_status & NOS_OLS_RECEIVED){
- if (fi->g.nport_timer_set == FALSE) {
- DPRINTK("NOS/OLS Received");
- DPRINTK("FM_status = %x", fm_status);
- fi->nport_timer.function = nos_ols_timer;
- fi->nport_timer.data = (unsigned long)fi;
- fi->nport_timer.expires = RUN_AT((3*HZ)/100); /* 30 msec */
- init_timer(&fi->nport_timer);
- add_timer(&fi->nport_timer);
- fi->g.nport_timer_set = TRUE;
- }
- }
-
- if (((fm_status & 0xF0) == OLD_PORT) && (((fm_status & 0x0F) == PORT_STATE_LF1) || ((fm_status & 0x0F) == PORT_STATE_LF2))) {
- DPRINTK1("Link Fail-I in OLD-PORT.");
- take_tachyon_offline(fi);
- reset_tachyon(fi, SOFTWARE_RESET);
- }
-
- if (fm_status & LOOP_STATE_TIMEOUT){
- if ((fm_status & 0xF0) == ARBITRATING)
- DPRINTK1("ED_TOV timesout.In ARBITRATING state...");
- if ((fm_status & 0xF0) == ARB_WON)
- DPRINTK1("ED_TOV timesout.In ARBITRATION WON state...");
- if ((fm_status & 0xF0) == OPEN)
- DPRINTK1("ED_TOV timesout.In OPEN state...");
- if ((fm_status & 0xF0) == OPENED)
- DPRINTK1("ED_TOV timesout.In OPENED state...");
- if ((fm_status & 0xF0) == TX_CLS)
- DPRINTK1("ED_TOV timesout.In XMITTED CLOSE state...");
- if ((fm_status & 0xF0) == RX_CLS)
- DPRINTK1("ED_TOV timesout.In RECEIVED CLOSE state...");
- if ((fm_status & 0xF0) == INITIALIZING)
- DPRINTK1("ED_TOV timesout.In INITIALIZING state...");
- DPRINTK1("Initializing Loop...");
- writel(INITIALIZE, fi->t_r.ptr_fm_control_reg);
- }
-
- if ((fm_status & BAD_ALPA) && (fi->g.loop_up == TRUE)) {
- u_char bad_alpa = (readl(fi->t_r.ptr_fm_rx_al_pa_reg) & 0xFF00) >> 8;
- if (tachyon_status & OSM_FROZEN) {
- reset_tachyon(fi, ERROR_RELEASE);
- reset_tachyon(fi, OCQ_RESET);
- }
- /* Fix for B34 */
- tx_logi(fi, ELS_PLOGI, fi->g.my_id);
-
- if (!fi->g.port_discovery && !fi->g.perform_adisc) {
- if (bad_alpa != 0xFE)
- DPRINTK("Bad AL_PA = %x", bad_alpa);
- }
- else {
- if ((fi->g.perform_adisc == TRUE) && (bad_alpa == 0x00)) {
- DPRINTK1("Performing ADISC...");
- fi->g.fabric_present = FALSE;
- perform_adisc(fi);
- }
- }
- }
-
- if (fm_status & LIPF_RECEIVED){
- DPRINTK("LIP(F8) Received");
- }
-
- if (fm_status & LINK_FAILURE) {
- if (fm_status & LOSS_OF_SIGNAL)
- DPRINTK1("Detected Loss of Signal.");
- if (fm_status & OUT_OF_SYNC)
- DPRINTK1("Detected Loss of Synchronization.");
- }
-
- if (fm_status & TRANSMIT_PARITY_ERROR) {
- /* Bad! Should not happen. Solution-> Hard Reset.
- */
- T_MSG("Parity Error. Perform Hard Reset!");
- }
-
- if (fi->g.alpa_list_index >= MAX_NODES){
- if (fi->g.port_discovery == TRUE) {
- fi->g.port_discovery = FALSE;
- add_display_cache_timer(fi);
- }
- fi->g.alpa_list_index = MAX_NODES;
- }
-
- if (fi->g.port_discovery == TRUE)
- local_port_discovery(fi);
-
- LEAVE("handle_FM_interrupt");
- return;
-}
-
-static void local_port_discovery(struct fc_info *fi)
-{
- if (fi->g.loop_up == TRUE) {
- /* If this is not here, some of the Bad AL_PAs are missed.
- */
- udelay(20);
- if ((fi->g.alpa_list_index == 0) && (fi->g.fabric_present == FALSE)){
- tx_logi(fi, ELS_FLOGI, F_PORT);
- }
- else {
- int login_state = sid_logged_in(fi, fi->g.my_ddaa | alpa_list[fi->g.alpa_list_index]);
- while ((fi->g.alpa_list_index == 0) || ((fi->g.alpa_list_index < MAX_NODES) && ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN) || (alpa_list[fi->g.alpa_list_index] == (fi->g.my_id & 0xFF)))))
- fi->g.alpa_list_index++;
- if (fi->g.alpa_list_index < MAX_NODES)
- tx_logi(fi, ELS_PLOGI, alpa_list[fi->g.alpa_list_index]);
- }
- fi->g.alpa_list_index++;
- if (fi->g.alpa_list_index >= MAX_NODES){
- if (fi->g.port_discovery == TRUE) {
- fi->g.port_discovery = FALSE;
- add_display_cache_timer(fi);
- }
- fi->g.alpa_list_index = MAX_NODES;
- }
- }
-}
-
-static void nos_ols_timer(unsigned long data)
-{
-struct fc_info *fi = (struct fc_info*)data;
-u_int fm_status;
- fm_status = readl(fi->t_r.ptr_fm_status_reg);
- DPRINTK1("FM_status in timer= %x", fm_status);
- fi->g.nport_timer_set = FALSE;
- del_timer(&fi->nport_timer);
- if ((fi->g.ptp_up == TRUE) || (fi->g.loop_up == TRUE))
- return;
- if (((fm_status & 0xF0) == OLD_PORT) && (((fm_status & 0x0F) == PORT_STATE_ACTIVE) || ((fm_status & 0x0F) == PORT_STATE_OFFLINE))) {
- DPRINTK1("In OLD-PORT after E_D_TOV.");
- take_tachyon_offline(fi);
- /* write R_T_TOV & E_D_TOV into the registers */
- writel(PTP_TOV_VALUES, fi->t_r.ptr_fm_tov_reg);
- writel(BB_CREDIT | NPORT, fi->t_r.ptr_fm_config_reg);
- fi->g.n_port_try = TRUE;
- DPRINTK1("In timer, TACHYON initializing as N_Port...\n");
- writel(INITIALIZE, fi->t_r.ptr_fm_control_reg);
- }
- else
- if ((fi->g.lport_timer_set == FALSE) && ((fm_status & 0xF0) == LOOP_FAIL)) {
- DPRINTK1("Loop Fail after E_D_TOV.");
- fi->lport_timer.function = loop_timer;
- fi->lport_timer.data = (unsigned long)fi;
- fi->lport_timer.expires = RUN_AT((8*HZ)/100);
- init_timer(&fi->lport_timer);
- add_timer(&fi->lport_timer);
- fi->g.lport_timer_set = TRUE;
- take_tachyon_offline(fi);
- reset_tachyon(fi, SOFTWARE_RESET);
- }
- else
- if (((fm_status & 0xF0) == OLD_PORT) && (((fm_status & 0x0F) == PORT_STATE_LF1) || ((fm_status & 0x0F) == PORT_STATE_LF2))) {
- DPRINTK1("Link Fail-II in OLD-PORT.");
- take_tachyon_offline(fi);
- reset_tachyon(fi, SOFTWARE_RESET);
- }
-}
-
-static void loop_timer(unsigned long data)
-{
-struct fc_info *fi = (struct fc_info*)data;
- fi->g.lport_timer_set = FALSE;
- del_timer(&fi->lport_timer);
- if ((fi->g.ptp_up == TRUE) || (fi->g.loop_up == TRUE))
- return;
-}
-
-static void add_display_cache_timer(struct fc_info *fi)
-{
- fi->display_cache_timer.function = display_cache_timer;
- fi->display_cache_timer.data = (unsigned long)fi;
- fi->display_cache_timer.expires = RUN_AT(fi->num_nodes * HZ);
- init_timer(&fi->display_cache_timer);
- add_timer(&fi->display_cache_timer);
-}
-
-static void display_cache_timer(unsigned long data)
-{
-struct fc_info *fi = (struct fc_info*)data;
- del_timer(&fi->display_cache_timer);
- display_cache(fi);
- return;
-}
-
-static void reset_tachyon(struct fc_info *fi, u_int value)
-{
-u_int tachyon_status, reset_done = OCQ_RESET_STATUS | SCSI_FREEZE_STATUS;
-int not_done = 1, i = 0;
- writel(value, fi->t_r.ptr_tach_control_reg);
- if (value == OCQ_RESET)
- fi->q.ocq_prod_indx = 0;
- tachyon_status = readl(fi->t_r.ptr_tach_status_reg);
-
- /* Software resets are immediately done, whereas other aren't. It
- about 30 clocks to do the reset */
- if (value != SOFTWARE_RESET) {
- while(not_done) {
- if (i++ > 100000) {
- T_MSG("Reset was unsuccessful! Tachyon Status = %x", tachyon_status);
- break;
- }
- tachyon_status = readl(fi->t_r.ptr_tach_status_reg);
- if ((tachyon_status & reset_done) == 0)
- not_done = 0;
- }
- }
- else {
- write_to_tachyon_registers(fi);
- }
-}
-
-static void take_tachyon_offline(struct fc_info *fi)
-{
-u_int fm_status = readl(fi->t_r.ptr_fm_status_reg);
-
- /* The first two conditions will never be true. The Manual and
- * the errata say this. But the current implementation is
- * decently stable.
- */
- //if ((fm_status & 0xF0) == LOOP_FAIL) {
- if (fm_status == LOOP_FAIL) {
- // workaround as in P. 89
- writel(HOST_CONTROL, fi->t_r.ptr_fm_control_reg);
- if (fi->g.loop_up == TRUE)
- writel(SOFTWARE_RESET, fi->t_r.ptr_tach_control_reg);
- else {
- writel(OFFLINE, fi->t_r.ptr_fm_control_reg);
- writel(EXIT_HOST_CONTROL, fi->t_r.ptr_fm_control_reg);
- }
- }
- else
- //if ((fm_status & LOOP_UP) == LOOP_UP) {
- if (fm_status == LOOP_UP) {
- writel(SOFTWARE_RESET, fi->t_r.ptr_tach_control_reg);
- }
- else
- writel(OFFLINE, fi->t_r.ptr_fm_control_reg);
-}
-
-
-static void read_novram(struct fc_info *fi)
-{
-int off = 0;
- fi->n_r.ptr_novram_hw_control_reg = fi->i_r.ptr_ichip_hw_control_reg;
- fi->n_r.ptr_novram_hw_status_reg = fi->i_r.ptr_ichip_hw_status_reg;
- iph5526_nr_do_init(fi);
- if (fi->clone_id == PCI_VENDOR_ID_INTERPHASE)
- off = 32;
-
- fi->g.my_node_name_high = (fi->n_r.data[off] << 16) | fi->n_r.data[off+1];
- fi->g.my_node_name_low = (fi->n_r.data[off+2] << 16) | fi->n_r.data[off+3];
- fi->g.my_port_name_high = (fi->n_r.data[off+4] << 16) | fi->n_r.data[off+5];
- fi->g.my_port_name_low = (fi->n_r.data[off+6] << 16) | fi->n_r.data[off+7];
- DPRINTK("node_name = %x %x", fi->g.my_node_name_high, fi->g.my_node_name_low);
- DPRINTK("port_name = %x %x", fi->g.my_port_name_high, fi->g.my_port_name_low);
-}
-
-static void reset_ichip(struct fc_info *fi)
-{
- /* (i)chip reset */
- writel(ICHIP_HCR_RESET, fi->i_r.ptr_ichip_hw_control_reg);
- /*wait for chip to get reset */
- mdelay(10);
- /*de-assert reset */
- writel(ICHIP_HCR_DERESET, fi->i_r.ptr_ichip_hw_control_reg);
-
- /* enable INT lines on the (i)chip */
- writel(ICHIP_HCR_ENABLE_INTA , fi->i_r.ptr_ichip_hw_control_reg);
- /* enable byte swap */
- writel(ICHIP_HAMR_BYTE_SWAP_ADDR_TR, fi->i_r.ptr_ichip_hw_addr_mask_reg);
-}
-
-static void tx_logi(struct fc_info *fi, u_int logi, u_int d_id)
-{
-int int_required = 1;
-u_short ox_id = OX_ID_FIRST_SEQUENCE;
-u_int r_ctl = RCTL_ELS_UCTL;
-u_int type = TYPE_ELS | SEQUENCE_INITIATIVE | FIRST_SEQUENCE;
-u_int my_mtu = fi->g.my_mtu;
- ENTER("tx_logi");
- /* We don't want interrupted for our own logi.
- * It screws up the port discovery process.
- */
- if (d_id == fi->g.my_id)
- int_required = 0;
- fill_login_frame(fi, logi);
- fi->g.type_of_frame = FC_ELS;
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.login, sizeof(LOGIN));
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),sizeof(LOGIN), r_ctl, type, d_id, my_mtu, int_required, ox_id, logi);
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
- LEAVE("tx_logi");
- return;
-}
-
-static void tx_logi_acc(struct fc_info *fi, u_int logi, u_int d_id, u_short received_ox_id)
-{
-int int_required = 0;
-u_int r_ctl = RCTL_ELS_SCTL;
-u_int type = TYPE_ELS | EXCHANGE_RESPONDER | LAST_SEQUENCE;
-u_int my_mtu = fi->g.my_mtu;
- ENTER("tx_logi_acc");
- fill_login_frame(fi, logi);
- fi->g.type_of_frame = FC_ELS;
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.login, sizeof(LOGIN));
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),sizeof(LOGIN), r_ctl, type, d_id, my_mtu, int_required, received_ox_id, logi);
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
- LEAVE("tx_logi_acc");
- return;
-}
-
-static void tx_prli(struct fc_info *fi, u_int command_code, u_int d_id, u_short received_ox_id)
-{
-int int_required = 1;
-u_int r_ctl = RCTL_ELS_UCTL;
-u_int type = TYPE_ELS | SEQUENCE_INITIATIVE | FIRST_SEQUENCE;
-u_int my_mtu = fi->g.my_mtu;
- ENTER("tx_prli");
- if (command_code == ELS_PRLI)
- fi->g.prli.cmnd_code = htons((ELS_PRLI | PAGE_LEN) >> 16);
- else {
- fi->g.prli.cmnd_code = htons((ELS_ACC | PAGE_LEN) >> 16);
- int_required = 0;
- type = TYPE_ELS | EXCHANGE_RESPONDER | LAST_SEQUENCE;
- r_ctl = RCTL_ELS_SCTL;
- }
- fi->g.prli.payload_length = htons(PRLI_LEN);
- fi->g.prli.type_code = htons(FCP_TYPE_CODE);
- fi->g.prli.est_image_pair = htons(IMAGE_PAIR);
- fi->g.prli.responder_pa = 0;
- fi->g.prli.originator_pa = 0;
- fi->g.prli.service_params = htonl(INITIATOR_FUNC | READ_XFER_RDY_DISABLED);
- fi->g.type_of_frame = FC_ELS;
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.prli, sizeof(PRLI));
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]), sizeof(PRLI), r_ctl, type, d_id, my_mtu, int_required, received_ox_id, command_code);
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
- LEAVE("tx_prli");
- return;
-}
-
-static void tx_logo(struct fc_info *fi, u_int d_id, u_short received_ox_id)
-{
-int int_required = 1;
-u_int r_ctl = RCTL_ELS_UCTL;
-u_int type = TYPE_ELS | EXCHANGE_RESPONDER | SEQUENCE_RESPONDER | FIRST_SEQUENCE | END_SEQUENCE | SEQUENCE_INITIATIVE;
-int size = sizeof(LOGO);
-char fc_id[3];
-u_int my_mtu = fi->g.my_mtu;
- ENTER("tx_logo");
- fi->g.logo.logo_cmnd = htonl(ELS_LOGO);
- fi->g.logo.reserved = 0;
- memcpy(fc_id, &(fi->g.my_id), 3);
- fi->g.logo.n_port_id_0 = fc_id[0];
- fi->g.logo.n_port_id_1 = fc_id[1];
- fi->g.logo.n_port_id_2 = fc_id[2];
- fi->g.logo.port_name_up = htonl(N_PORT_NAME_HIGH);
- fi->g.logo.port_name_low = htonl(N_PORT_NAME_LOW);
- fi->g.type_of_frame = FC_ELS;
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.logo, sizeof(LOGO));
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),size, r_ctl, type, d_id, my_mtu, int_required, received_ox_id, ELS_LOGO);
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
- LEAVE("tx_logo");
-}
-
-static void tx_adisc(struct fc_info *fi, u_int cmnd_code, u_int d_id, u_short received_ox_id)
-{
-int int_required = 0;
-u_int r_ctl = RCTL_ELS_SCTL;
-u_int type = TYPE_ELS | EXCHANGE_RESPONDER | SEQUENCE_RESPONDER | FIRST_SEQUENCE | END_SEQUENCE;
-int size = sizeof(ADISC);
-u_int my_mtu = fi->g.my_mtu;
- fi->g.adisc.ls_cmnd_code = htonl(cmnd_code);
- fi->g.adisc.hard_address = htonl(0);
- fi->g.adisc.port_name_high = htonl(N_PORT_NAME_HIGH);
- fi->g.adisc.port_name_low = htonl(N_PORT_NAME_LOW);
- fi->g.adisc.node_name_high = htonl(NODE_NAME_HIGH);
- fi->g.adisc.node_name_low = htonl(NODE_NAME_LOW);
- fi->g.adisc.n_port_id = htonl(fi->g.my_id);
- if (cmnd_code == ELS_ADISC) {
- int_required = 1;
- r_ctl = RCTL_ELS_UCTL;
- type = TYPE_ELS | SEQUENCE_INITIATIVE | FIRST_SEQUENCE;
- }
- fi->g.type_of_frame = FC_ELS;
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.adisc, size);
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),size, r_ctl, type, d_id, my_mtu, int_required, received_ox_id, cmnd_code);
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
-}
-
-static void tx_ls_rjt(struct fc_info *fi, u_int d_id, u_short received_ox_id, u_short reason_code, u_short expln_code)
-{
-int int_required = 0;
-u_int r_ctl = RCTL_ELS_SCTL;
-u_int type = TYPE_ELS | EXCHANGE_RESPONDER | LAST_SEQUENCE;
-int size = sizeof(LS_RJT);
-u_int my_mtu = fi->g.my_mtu;
- ENTER("tx_ls_rjt");
- fi->g.ls_rjt.cmnd_code = htonl(ELS_LS_RJT);
- fi->g.ls_rjt.reason_code = htonl((reason_code << 16) | expln_code);
- fi->g.type_of_frame = FC_ELS;
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.ls_rjt, size);
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),size, r_ctl, type, d_id, my_mtu, int_required, received_ox_id, ELS_LS_RJT);
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
- LEAVE("tx_ls_rjt");
-}
-
-static void tx_abts(struct fc_info *fi, u_int d_id, u_short ox_id)
-{
-int int_required = 1;
-u_int r_ctl = RCTL_BASIC_ABTS;
-u_int type = TYPE_BLS | SEQUENCE_INITIATIVE | FIRST_SEQUENCE;
-int size = 0;
-u_int my_mtu = fi->g.my_mtu;
- ENTER("tx_abts");
- fi->g.type_of_frame = FC_BLS;
- tx_exchange(fi, NULL, size, r_ctl, type, d_id, my_mtu, int_required, ox_id, RCTL_BASIC_ABTS);
- LEAVE("tx_abts");
-}
-
-static u_int plogi_ok(struct fc_info *fi, u_int *buff_addr, int size)
-{
-int ret_code = 0;
-u_short mtu = ntohl(*(buff_addr + 10)) & 0x00000FFF;
-u_short class3 = ntohl(*(buff_addr + 25)) >> 16;
-u_short class3_conc_seq = ntohl(*(buff_addr + 27)) >> 16;
-u_short open_seq = ntohl(*(buff_addr + 28)) >> 16;
- DPRINTK1("mtu = %x class3 = %x conc_seq = %x open_seq = %x", mtu, class3, class3_conc_seq, open_seq);
- size -= TACHYON_HEADER_LEN;
- if (!(class3 & 0x8000)) {
- DPRINTK1("Received PLOGI with class3 = %x", class3);
- ret_code = (LOGICAL_ERR << 16) | NO_EXPLN;
- return ret_code;
- }
- if (mtu < 256) {
- DPRINTK1("Received PLOGI with MTU set to %x", mtu);
- ret_code = (LOGICAL_ERR << 16) | RECV_FIELD_SIZE;
- return ret_code;
- }
- if (size != PLOGI_LEN) {
- DPRINTK1("Received PLOGI of size %x", size);
- ret_code = (LOGICAL_ERR << 16) | INV_PAYLOAD_LEN;
- return ret_code;
- }
- if (class3_conc_seq == 0) {
- DPRINTK1("Received PLOGI with conc_seq == 0");
- ret_code = (LOGICAL_ERR << 16) | CONC_SEQ;
- return ret_code;
- }
- if (open_seq == 0) {
- DPRINTK1("Received PLOGI with open_seq == 0");
- ret_code = (LOGICAL_ERR << 16) | NO_EXPLN;
- return ret_code;
- }
-
- /* Could potentially check for more fields, but might end up
- not talking to most of the devices. ;-) */
- /* Things that could get checked are:
- common_features = 0x8800
- total_concurrent_seq = at least 1
- */
- return ret_code;
-}
-
-static void tx_acc(struct fc_info *fi, u_int d_id, u_short received_ox_id)
-{
-int int_required = 0;
-u_int r_ctl = RCTL_ELS_SCTL;
-u_int type = TYPE_ELS | EXCHANGE_RESPONDER | LAST_SEQUENCE;
-int size = sizeof(ACC);
-u_int my_mtu = fi->g.my_mtu;
- ENTER("tx_acc");
- fi->g.acc.cmnd_code = htonl(ELS_ACC);
- fi->g.type_of_frame = FC_ELS;
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.acc, size);
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),size, r_ctl, type, d_id, my_mtu, int_required, received_ox_id, ELS_ACC);
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
- LEAVE("tx_acc");
-}
-
-
-static void tx_name_server_req(struct fc_info *fi, u_int req)
-{
-int int_required = 1, i, size = 0;
-u_short ox_id = OX_ID_FIRST_SEQUENCE;
-u_int type = TYPE_FC_SERVICES | SEQUENCE_INITIATIVE | FIRST_SEQUENCE;
-u_int r_ctl = FC4_DEVICE_DATA | UNSOLICITED_CONTROL;
-u_int my_mtu = fi->g.my_mtu, d_id = DIRECTORY_SERVER;
-CT_HDR ct_hdr;
- ENTER("tx_name_server_req");
- /* Fill up CT_Header */
- ct_hdr.rev_in_id = htonl(FC_CT_REV);
- ct_hdr.fs_type = DIRECTORY_SERVER_APP;
- ct_hdr.fs_subtype = NAME_SERVICE;
- ct_hdr.options = 0;
- ct_hdr.resv1 = 0;
- ct_hdr.cmnd_resp_code = htons(req >> 16);
- ct_hdr.max_res_size = 0;
- ct_hdr.resv2 = 0;
- ct_hdr.reason_code = 0;
- ct_hdr.expln_code = 0;
- ct_hdr.vendor_unique = 0;
-
- fi->g.type_of_frame = FC_ELS;
- switch(req) {
- case FCS_RFC_4:
- memcpy(&(fi->g.rfc_4.ct_hdr), &ct_hdr, sizeof(CT_HDR));
- fi->g.rfc_4.s_id = htonl(fi->g.my_id);
- for (i = 0; i < 32; i++)
- fi->g.rfc_4.bit_map[i] = 0;
- /* We support IP & SCSI */
- fi->g.rfc_4.bit_map[2] = 0x01;
- fi->g.rfc_4.bit_map[3] = 0x20;
- size = sizeof(RFC_4);
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.rfc_4, size);
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),size, r_ctl, type, d_id, my_mtu, int_required, ox_id, req);
- break;
- case FCS_GP_ID4:
- memcpy(&(fi->g.gp_id4.ct_hdr), &ct_hdr, sizeof(CT_HDR));
- fi->g.gp_id4.port_type = htonl(PORT_TYPE_NX_PORTS);
- size = sizeof(GP_ID4);
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.gp_id4, size);
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),size, r_ctl, type, d_id, my_mtu, int_required, ox_id, req);
- break;
- }
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
- LEAVE("tx_name_server_req");
-}
-
-static void tx_scr(struct fc_info *fi)
-{
-int int_required = 1, size = sizeof(SCR);
-u_short ox_id = OX_ID_FIRST_SEQUENCE;
-u_int type = TYPE_ELS | SEQUENCE_INITIATIVE | FIRST_SEQUENCE;
-u_int r_ctl = RCTL_ELS_UCTL;
-u_int my_mtu = fi->g.my_mtu, d_id = FABRIC_CONTROLLER;
- ENTER("tx_scr");
- fi->g.scr.cmnd_code = htonl(ELS_SCR);
- fi->g.scr.reg_function = htonl(FULL_REGISTRATION);
- fi->g.type_of_frame = FC_ELS;
- memcpy(fi->g.els_buffer[fi->g.e_i], &fi->g.scr, size);
- tx_exchange(fi, (char *)(fi->g.els_buffer[fi->g.e_i]),size, r_ctl, type, d_id, my_mtu, int_required, ox_id, ELS_SCR);
- fi->g.e_i++;
- if (fi->g.e_i == MAX_PENDING_FRAMES)
- fi->g.e_i = 0;
- LEAVE("tx_scr");
-}
-
-static void perform_adisc(struct fc_info *fi)
-{
-int count = 0;
- /* Will be set to TRUE when timer expires in a PLDA environment.
- */
- fi->g.port_discovery = FALSE;
-
- if (fi->node_info_list) {
- struct fc_node_info *temp_list = fi->node_info_list;
- while(temp_list) {
- /* Tx ADISC to all non-fabric based
- * entities.
- */
- if ((temp_list->d_id & 0xFF0000) != 0xFF0000)
- tx_adisc(fi, ELS_ADISC, temp_list->d_id, OX_ID_FIRST_SEQUENCE);
- temp_list = temp_list->next;
- udelay(20);
- count++;
- }
- }
- /* Perform Port Discovery after timer expires.
- * We are giving time for the ADISCed nodes to respond
- * so that we don't have to perform PLOGI to those whose
- * login are _still_ valid.
- */
- fi->explore_timer.function = port_discovery_timer;
- fi->explore_timer.data = (unsigned long)fi;
- fi->explore_timer.expires = RUN_AT((count*3*HZ)/100);
- init_timer(&fi->explore_timer);
- add_timer(&fi->explore_timer);
-}
-
-static void explore_fabric(struct fc_info *fi, u_int *buff_addr)
-{
-u_int *addr = buff_addr + 12; /* index into payload */
-u_char control_code;
-u_int d_id;
-int count = 0;
- ENTER("explore_fabric");
- DPRINTK1("entering explore_fabric");
-
- /*fi->g.perform_adisc = TRUE;
- fi->g.explore_fabric = TRUE;
- perform_adisc(fi);*/
-
- do {
- d_id = ntohl(*addr) & 0x00FFFFFF;
- if (d_id != fi->g.my_id) {
- if (sid_logged_in(fi, d_id) == NODE_NOT_PRESENT)
- tx_logi(fi, ELS_PLOGI, d_id);
- else
- if (sid_logged_in(fi, d_id) == NODE_LOGGED_OUT)
- tx_adisc(fi, ELS_ADISC, d_id, OX_ID_FIRST_SEQUENCE);
- count++;
- }
- control_code = (ntohl(*addr) & 0xFF000000) >> 24;
- addr++;
- DPRINTK1("cc = %x, d_id = %x", control_code, d_id);
- } while (control_code != 0x80);
-
- fi->explore_timer.function = fabric_explore_timer;
- fi->explore_timer.data = (unsigned long)fi;
- /* We give 30 msec for each device to respond and then send out
- * our SCSI enquiries.
- */
- fi->explore_timer.expires = RUN_AT((count*3*HZ)/100);
- init_timer(&fi->explore_timer);
- add_timer(&fi->explore_timer);
-
- DPRINTK1("leaving explore_fabric");
- LEAVE("explore_fabric");
-}
-
-static void fabric_explore_timer(unsigned long data)
-{
-struct fc_info *fi = (struct fc_info*)data;
- del_timer(&fi->explore_timer);
-
- if ((fi->g.loop_up == TRUE) && (fi->g.ptp_up == FALSE)) {
- /* Initiate Local Port Discovery on the Local Loop.
- */
- fi->g.port_discovery = TRUE;
- fi->g.alpa_list_index = 1;
- local_port_discovery(fi);
- }
- fi->g.explore_fabric = FALSE;
- return;
-}
-
-static void port_discovery_timer(unsigned long data)
-{
-struct fc_info *fi = (struct fc_info*)data;
- del_timer(&fi->explore_timer);
-
- if ((fi->g.loop_up == TRUE) && (fi->g.explore_fabric != TRUE)) {
- fi->g.port_discovery = TRUE;
- fi->g.alpa_list_index = 1;
- local_port_discovery(fi);
- }
- fi->g.perform_adisc = FALSE;
- return;
-}
-
-static void add_to_ox_id_list(struct fc_info *fi, u_int transaction_id, u_int cmnd_code)
-{
-struct ox_id_els_map *p, *q = fi->ox_id_list, *r = NULL;
-int size = sizeof(struct ox_id_els_map);
- while (q != NULL) {
- r = q;
- q = q->next;
- }
- p = (struct ox_id_els_map *)kmalloc(size, GFP_ATOMIC);
- if (p == NULL) {
- T_MSG("kmalloc failed in add_to_ox_id_list()");
- return;
- }
- p->ox_id = transaction_id;
- p->els = cmnd_code;
- p->next = NULL;
- if (fi->ox_id_list == NULL)
- fi->ox_id_list = p;
- else
- r->next = p;
- return;
-}
-
-static u_int remove_from_ox_id_list(struct fc_info *fi, u_short received_ox_id)
-{
-struct ox_id_els_map *p = fi->ox_id_list, *q = fi->ox_id_list;
-u_int els_type;
- while (q != NULL) {
- if (q->ox_id == received_ox_id) {
-
- if (q == fi->ox_id_list)
- fi->ox_id_list = fi->ox_id_list->next;
- else
- if (q->next == NULL)
- p->next = NULL;
- else
- p->next = q->next;
-
- els_type = q->els;
- kfree(q);
- return els_type;
- }
- p = q;
- q = q->next;
- }
- if (q == NULL)
- DPRINTK2("Could not find ox_id %x in ox_id_els_map", received_ox_id);
- return 0;
-}
-
-static void build_tachyon_header(struct fc_info *fi, u_int my_id, u_int r_ctl, u_int d_id, u_int type, u_char seq_id, u_char df_ctl, u_short ox_id, u_short rx_id, char *data)
-{
-u_char alpa = d_id & 0x0000FF;
-u_int dest_ddaa = d_id &0xFFFF00;
-
- ENTER("build_tachyon_header");
- DPRINTK("d_id = %x, my_ddaa = %x", d_id, fi->g.my_ddaa);
- /* Does it have to go to/thru a Fabric? */
- if ((dest_ddaa != 0) && ((d_id == F_PORT) || (fi->g.fabric_present && (dest_ddaa != fi->g.my_ddaa))))
- alpa = 0x00;
- fi->g.tach_header.resv = 0x00000000;
- fi->g.tach_header.sof_and_eof = SOFI3 | EOFN;
- fi->g.tach_header.dest_alpa = alpa;
- /* Set LCr properly to have enuff credit */
- if (alpa == REPLICATE)
- fi->g.tach_header.lcr_and_time_stamp = htons(0xC00);/* LCr=3 */
- else
- fi->g.tach_header.lcr_and_time_stamp = 0;
- fi->g.tach_header.r_ctl_and_d_id = htonl(r_ctl | d_id);
- fi->g.tach_header.vc_id_and_s_id = htonl(my_id);
- fi->g.tach_header.type_and_f_cntl = htonl(type);
- fi->g.tach_header.seq_id = seq_id;
- fi->g.tach_header.df_cntl = df_ctl;
- fi->g.tach_header.seq_cnt = 0;
- fi->g.tach_header.ox_id = htons(ox_id);
- fi->g.tach_header.rx_id = htons(rx_id);
- fi->g.tach_header.ro = 0;
- if (data) {
- /* We use the Seq_Count to keep track of IP frames in the
- * OCI_interrupt handler. Initial Seq_Count of IP frames is 1.
- */
- if (fi->g.type_of_frame == FC_BROADCAST)
- fi->g.tach_header.seq_cnt = htons(0x1);
- else
- fi->g.tach_header.seq_cnt = htons(0x2);
- fi->g.tach_header.nw_header.d_naa = htons(0x1000);
- fi->g.tach_header.nw_header.s_naa = htons(0x1000);
- memcpy(&(fi->g.tach_header.nw_header.dest_high), data, 2);
- memcpy(&(fi->g.tach_header.nw_header.dest_low), data + 2, 4);
- memcpy(&(fi->g.tach_header.nw_header.source_high), data + 6, 2);
- memcpy(&(fi->g.tach_header.nw_header.source_low), data + 8, 4);
- }
- LEAVE("build_tachyon_header");
-}
-
-static void build_EDB(struct fc_info *fi, char *data, u_short flags, u_short len)
-{
- fi->g.edb.buf_addr = ntohl((u_int)virt_to_bus(data));
- fi->g.edb.ehf = ntohs(flags);
- if (len % 4)
- len += (4 - (len % 4));
- fi->g.edb.buf_len = ntohs(len);
-}
-
-static void build_ODB(struct fc_info *fi, u_char seq_id, u_int d_id, u_int len, u_int cntl, u_short mtu, u_short ox_id, u_short rx_id, int NW_header, int int_required, u_int frame_class)
-{
- fi->g.odb.seq_d_id = htonl(seq_id << 24 | d_id);
- fi->g.odb.tot_len = len;
- if (NW_header)
- fi->g.odb.tot_len += NW_HEADER_LEN;
- if (fi->g.odb.tot_len % 4)
- fi->g.odb.tot_len += (4 - (fi->g.odb.tot_len % 4));
- fi->g.odb.tot_len = htonl(fi->g.odb.tot_len);
- switch(int_required) {
- case NO_COMP_AND_INT:
- fi->g.odb.cntl = htons(ODB_CLASS_3 | ODB_EE_CREDIT | ODB_NO_INT | ODB_NO_COMP | cntl);
- break;
- case INT_AND_COMP_REQ:
- fi->g.odb.cntl = htons(ODB_CLASS_3 | ODB_EE_CREDIT | cntl);
- break;
- case NO_INT_COMP_REQ:
- fi->g.odb.cntl = htons(ODB_CLASS_3 | ODB_EE_CREDIT | ODB_NO_INT | cntl);
- break;
- }
- fi->g.odb.rx_id = htons(rx_id);
- fi->g.odb.cs_enable = 0;
- fi->g.odb.cs_seed = htons(1);
-
- fi->g.odb.hdr_addr = htonl(virt_to_bus(fi->q.ptr_tachyon_header[fi->q.tachyon_header_indx]));
- fi->g.odb.frame_len = htons(mtu);
-
- if (NW_header) {
- /* The pointer to the sk_buff is in here. Freed up when the
- * OCI_interrupt is received.
- */
- fi->g.odb.trans_id = htonl(frame_class);
- fi->g.odb.hdr_len = TACHYON_HEADER_LEN + NW_HEADER_LEN;
- }
- else {
- /* helps in tracking transmitted OX_IDs */
- fi->g.odb.trans_id = htonl((frame_class & 0xFFFF0000) | ox_id);
- fi->g.odb.hdr_len = TACHYON_HEADER_LEN;
- }
- fi->g.odb.hdr_len = htons(fi->g.odb.hdr_len);
-
- fi->g.odb.edb_addr = htonl(virt_to_bus(fi->q.ptr_edb[fi->q.edb_buffer_indx]));
-}
-
-static void fill_login_frame(struct fc_info *fi, u_int logi)
-{
-int i;
- fi->g.login.ls_cmnd_code= htonl(logi);
- fi->g.login.fc_ph_version = htons(PH_VERSION);
- if (fi->g.loop_up)
- fi->g.login.buff_to_buff_credit = htons(LOOP_BB_CREDIT);
- else
- if (fi->g.ptp_up)
- fi->g.login.buff_to_buff_credit = htons(PT2PT_BB_CREDIT);
- if ((logi != ELS_FLOGI) || (logi == ELS_ACC))
- fi->g.login.common_features = htons(PLOGI_C_F);
- else
- if (logi == ELS_FLOGI)
- fi->g.login.common_features = htons(FLOGI_C_F);
- fi->g.login.recv_data_field_size = htons(TACH_FRAME_SIZE);
- fi->g.login.n_port_total_conc_seq = htons(CONCURRENT_SEQUENCES);
- fi->g.login.rel_off_by_info_cat = htons(RO_INFO_CATEGORY);
- fi->g.login.ED_TOV = htonl(E_D_TOV);
- fi->g.login.n_port_name_high = htonl(N_PORT_NAME_HIGH);
- fi->g.login.n_port_name_low = htonl(N_PORT_NAME_LOW);
- fi->g.login.node_name_high = htonl(NODE_NAME_HIGH);
- fi->g.login.node_name_low = htonl(NODE_NAME_LOW);
-
- /* Fill Class 1 parameters */
- fi->g.login.c_of_s[0].service_options = htons(0);
- fi->g.login.c_of_s[0].initiator_ctl = htons(0);
- fi->g.login.c_of_s[0].recipient_ctl = htons(0);
- fi->g.login.c_of_s[0].recv_data_field_size = htons(0);
- fi->g.login.c_of_s[0].concurrent_sequences = htons(0);
- fi->g.login.c_of_s[0].n_port_end_to_end_credit = htons(0);
- fi->g.login.c_of_s[0].open_seq_per_exchange = htons(0);
- fi->g.login.c_of_s[0].resv = htons(0);
-
- /* Fill Class 2 parameters */
- fi->g.login.c_of_s[1].service_options = htons(0);
- fi->g.login.c_of_s[1].initiator_ctl = htons(0);
- fi->g.login.c_of_s[1].recipient_ctl = htons(0);
- fi->g.login.c_of_s[1].recv_data_field_size = htons(0);
- fi->g.login.c_of_s[1].concurrent_sequences = htons(0);
- fi->g.login.c_of_s[1].n_port_end_to_end_credit = htons(0);
- fi->g.login.c_of_s[1].open_seq_per_exchange = htons(0);
- fi->g.login.c_of_s[1].resv = htons(0);
-
- /* Fill Class 3 parameters */
- if (logi == ELS_FLOGI)
- fi->g.login.c_of_s[2].service_options = htons(SERVICE_VALID | SEQUENCE_DELIVERY);
- else
- fi->g.login.c_of_s[2].service_options = htons(SERVICE_VALID);
- fi->g.login.c_of_s[2].initiator_ctl = htons(0);
- fi->g.login.c_of_s[2].recipient_ctl = htons(0);
- fi->g.login.c_of_s[2].recv_data_field_size = htons(TACH_FRAME_SIZE);
- fi->g.login.c_of_s[2].concurrent_sequences = htons(CLASS3_CONCURRENT_SEQUENCE);
- fi->g.login.c_of_s[2].n_port_end_to_end_credit = htons(0);
- fi->g.login.c_of_s[2].open_seq_per_exchange = htons(CLASS3_OPEN_SEQUENCE);
- fi->g.login.c_of_s[2].resv = htons(0);
-
- for(i = 0; i < 4; i++) {
- fi->g.login.resv[i] = 0;
- fi->g.login.vendor_version_level[i] = 0;
- }
-}
-
-
-/* clear the Interrupt Latch on the (i)chip, so that you can receive
- * Interrupts from Tachyon in future
- */
-static void reset_latch(struct fc_info *fi)
-{
- writel(readl(fi->i_r.ptr_ichip_hw_status_reg) | ICHIP_HSR_INT_LATCH, fi->i_r.ptr_ichip_hw_status_reg);
-}
-
-static void update_OCQ_indx(struct fc_info *fi)
-{
- fi->q.ocq_prod_indx++;
- if (fi->q.ocq_prod_indx == OCQ_LENGTH)
- fi->q.ocq_prod_indx = 0;
- writel(fi->q.ocq_prod_indx, fi->t_r.ptr_ocq_prod_indx_reg);
-}
-
-static void update_IMQ_indx(struct fc_info *fi, int count)
-{
- fi->q.imq_cons_indx += count;
- if (fi->q.imq_cons_indx >= IMQ_LENGTH)
- fi->q.imq_cons_indx -= IMQ_LENGTH;
- writel(fi->q.imq_cons_indx, fi->t_r.ptr_imq_cons_indx_reg);
-}
-
-static void update_SFSBQ_indx(struct fc_info *fi)
-{
- fi->q.sfsbq_prod_indx++;
- if (fi->q.sfsbq_prod_indx == SFSBQ_LENGTH)
- fi->q.sfsbq_prod_indx = 0;
- writel(fi->q.sfsbq_prod_indx, fi->t_r.ptr_sfsbq_prod_reg);
-}
-
-static void update_MFSBQ_indx(struct fc_info *fi, int count)
-{
- fi->q.mfsbq_prod_indx += count;
- if (fi->q.mfsbq_prod_indx >= MFSBQ_LENGTH)
- fi->q.mfsbq_prod_indx -= MFSBQ_LENGTH;
- writel(fi->q.mfsbq_prod_indx, fi->t_r.ptr_mfsbq_prod_reg);
-}
-
-
-static void update_tachyon_header_indx(struct fc_info *fi)
-{
- fi->q.tachyon_header_indx++;
- if (fi->q.tachyon_header_indx == NO_OF_TACH_HEADERS)
- fi->q.tachyon_header_indx = 0;
-}
-
-static void update_EDB_indx(struct fc_info *fi)
-{
- fi->q.edb_buffer_indx++;
- if (fi->q.edb_buffer_indx == EDB_LEN)
- fi->q.edb_buffer_indx = 0;
-}
-
-static int iph5526_open(struct net_device *dev)
-{
- netif_start_queue(dev);
- return 0;
-}
-
-static int iph5526_close(struct net_device *dev)
-{
- netif_stop_queue(dev);
- return 0;
-}
-
-static void iph5526_timeout(struct net_device *dev)
-{
- struct fc_info *fi = dev->priv;
- printk(KERN_WARNING "%s: timed out on send.\n", dev->name);
- fi->fc_stats.tx_dropped++;
- dev->trans_start = jiffies;
- netif_wake_queue(dev);
-}
-
-static int iph5526_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct fc_info *fi = dev->priv;
- int status = 0;
- short type = 0;
- u_long flags;
- struct fcllc *fcllc;
-
- ENTER("iph5526_send_packet");
-
- netif_stop_queue(dev);
- /* Strip off the pseudo header.
- */
- skb->data = skb->data + 2*FC_ALEN;
- skb->len = skb->len - 2*FC_ALEN;
- fcllc = (struct fcllc *)skb->data;
- type = ntohs(fcllc->ethertype);
-
- spin_lock_irqsave(&fi->fc_lock, flags);
- switch(type) {
- case ETH_P_IP:
- status = tx_ip_packet(skb, skb->len, fi);
- break;
- case ETH_P_ARP:
- status = tx_arp_packet(skb->data, skb->len, fi);
- break;
- default:
- T_MSG("WARNING!!! Received Unknown Packet Type... Discarding...");
- fi->fc_stats.rx_dropped++;
- break;
- }
- spin_unlock_irqrestore(&fi->fc_lock, flags);
-
- if (status) {
- fi->fc_stats.tx_bytes += skb->len;
- fi->fc_stats.tx_packets++;
- }
- else
- fi->fc_stats.tx_dropped++;
- dev->trans_start = jiffies;
- /* We free up the IP buffers in the OCI_interrupt handler.
- * status == 0 implies that the frame was not transmitted. So the
- * skb is freed here.
- */
- if ((type == ETH_P_ARP) || (status == 0))
- dev_kfree_skb(skb);
- netif_wake_queue(dev);
- LEAVE("iph5526_send_packet");
- return 0;
-}
-
-static int iph5526_change_mtu(struct net_device *dev, int mtu)
-{
- return 0;
-}
-
-static int tx_ip_packet(struct sk_buff *skb, unsigned long len, struct fc_info *fi)
-{
-u_int d_id;
-int int_required = 1;
-u_int r_ctl = FC4_DEVICE_DATA | UNSOLICITED_DATA;
-u_int type = TYPE_LLC_SNAP;
-u_short ox_id = OX_ID_FIRST_SEQUENCE;
-u_int mtu;
-struct fc_node_info *q;
-
- ENTER("tx_ip_packet");
- q = look_up_cache(fi, skb->data - 2*FC_ALEN);
- if (q != NULL) {
- d_id = q->d_id;
- DPRINTK("Look-Up Cache Succeeded for d_id = %x", d_id);
- mtu = q->mtu;
- if (q->login == LOGIN_COMPLETED){
- fi->g.type_of_frame = FC_IP;
- return tx_exchange(fi, skb->data, len, r_ctl, type, d_id, mtu, int_required, ox_id, virt_to_bus(skb));
- }
-
- if (q->d_id == BROADCAST) {
- struct fc_node_info *p = fi->node_info_list;
- int return_value = FALSE;
- fi->g.type_of_frame = FC_BROADCAST;
- /* Do unicast to local nodes.
- */
- int_required = 0;
- while(p != NULL) {
- d_id = p->d_id;
- if ((d_id & 0xFFFF00) == fi->g.my_ddaa)
- return_value |= tx_exchange(fi, skb->data, len, r_ctl, type, d_id, fi->g.my_mtu, int_required, ox_id, TYPE_LLC_SNAP);
- p = p->next;
- }
- kfree(q);
- return return_value;
- }
-
- if (q->login != LOGIN_COMPLETED) {
- DPRINTK1("Node not logged in... Txing PLOGI to %x", d_id);
- /* FIXME: we are dumping the frame here */
- tx_logi(fi, ELS_PLOGI, d_id);
- }
- }
- DPRINTK2("Look-Up Cache Failed");
- LEAVE("tx_ip_packet");
- return 0;
-}
-
-static int tx_arp_packet(char *data, unsigned long len, struct fc_info *fi)
-{
-u_int opcode = data[ARP_OPCODE_0];
-u_int d_id;
-int int_required = 0, return_value = FALSE;
-u_int r_ctl = FC4_DEVICE_DATA | UNSOLICITED_DATA;
-u_int type = TYPE_LLC_SNAP;
-u_short ox_id = OX_ID_FIRST_SEQUENCE;
-u_int my_mtu = fi->g.my_mtu;
- ENTER("tx_arp_packet");
-
- opcode = opcode << 8 | data[ARP_OPCODE_1];
- fi->g.type_of_frame = FC_IP;
-
- if (opcode == ARPOP_REQUEST) {
- struct fc_node_info *q = fi->node_info_list;
- d_id = BROADCAST;
- return_value |= tx_exchange(fi, data, len, r_ctl, type, d_id, my_mtu, int_required, ox_id, TYPE_LLC_SNAP);
- /* Some devices support HW_TYPE 0x01 */
- memcpy(fi->g.arp_buffer, data - 2*FC_ALEN, len + 2*FC_ALEN);
- fi->g.arp_buffer[9 + 2*FC_ALEN] = 0x01;
- return_value |= tx_exchange(fi, (char *)(fi->g.arp_buffer + 2*FC_ALEN), len, r_ctl, type, d_id, my_mtu, int_required, ox_id, TYPE_LLC_SNAP);
-
- /* Do unicast to local nodes.
- */
- while(q != NULL) {
- fi->g.type_of_frame = FC_BROADCAST;
- d_id = q->d_id;
- if ((d_id & 0xFFFF00) == fi->g.my_ddaa) {
- return_value |= tx_exchange(fi, data, len, r_ctl, type, d_id, my_mtu, int_required, ox_id, TYPE_LLC_SNAP);
- // Some devices support HW_TYPE 0x01
- memcpy(fi->g.arp_buffer, data - 2*FC_ALEN, len + 2*FC_ALEN);
- fi->g.arp_buffer[9 + 2*FC_ALEN] = 0x01;
- return_value |= tx_exchange(fi, (char *)(fi->g.arp_buffer + 2*FC_ALEN), len, r_ctl, type, d_id, my_mtu, int_required, ox_id, TYPE_LLC_SNAP);
- }
- q = q->next;
- }
- return return_value;
- }
- else
- if (opcode == ARPOP_REPLY) {
- struct fc_node_info *q; u_int mtu;
- DPRINTK("We are sending out an ARP reply");
- q = look_up_cache(fi, data - 2*FC_ALEN);
- if (q != NULL) {
- d_id = q->d_id;
- DPRINTK("Look-Up Cache Succeeded for d_id = %x", d_id);
- mtu = q->mtu;
- if (q->login == LOGIN_COMPLETED){
- tx_exchange(fi, data, len, r_ctl, type, d_id, mtu, int_required, ox_id, TYPE_LLC_SNAP);
- /* Some devices support HW_TYPE 0x01 */
- memcpy(fi->g.arp_buffer, data - 2*FC_ALEN, len + 2*FC_ALEN);
- fi->g.arp_buffer[9 + 2*FC_ALEN] = 0x01;
- return tx_exchange(fi, (char *)(fi->g.arp_buffer + 2*FC_ALEN), len, r_ctl, type, d_id, my_mtu, int_required, ox_id, TYPE_LLC_SNAP);
- }
- else {
- DPRINTK1("Node not logged in... Txing PLOGI to %x", d_id);
- tx_logi(fi, ELS_PLOGI, d_id); /* FIXME: we are dumping the frame here */
- }
- }
- DPRINTK2("Look-Up Cache Failed");
- }
- else {
- T_MSG("Warning!!! Invalid Opcode in ARP Packet!");
- }
- LEAVE("tx_arp_packet");
- return 0;
-}
-
-
-static void rx_net_packet(struct fc_info *fi, u_char *buff_addr, int payload_size)
-{
-struct net_device *dev = fi->dev;
-struct sk_buff *skb;
-u_int skb_size = 0;
-struct fch_hdr fch;
- ENTER("rx_net_packet");
- skb_size = payload_size - TACHYON_HEADER_LEN;
- DPRINTK("skb_size = %d", skb_size);
- fi->fc_stats.rx_bytes += skb_size - 2;
- skb = dev_alloc_skb(skb_size);
- if (skb == NULL) {
- printk(KERN_NOTICE "%s: In rx_net_packet() Memory squeeze, dropping packet.\n", dev->name);
- fi->fc_stats.rx_dropped++;
- return;
- }
- /* Skip over the Tachyon Frame Header.
- */
- buff_addr += TACHYON_HEADER_LEN;
-
- memcpy(fch.daddr, buff_addr + 2, FC_ALEN);
- memcpy(fch.saddr, buff_addr + 10, FC_ALEN);
- buff_addr += 2;
- memcpy(buff_addr, fch.daddr, FC_ALEN);
- memcpy(buff_addr + 6, fch.saddr, FC_ALEN);
- skb_reserve(skb, 2);
- memcpy(skb_put(skb, skb_size - 2), buff_addr, skb_size - 2);
- skb->dev = dev;
- skb->protocol = fc_type_trans(skb, dev);
- DPRINTK("protocol = %x", skb->protocol);
-
- /* Hmmm... to accept HW Type 0x01 as well...
- */
- if (skb->protocol == ntohs(ETH_P_ARP))
- skb->data[1] = 0x06;
- netif_rx(skb);
- dev->last_rx = jiffies;
- fi->fc_stats.rx_packets++;
- LEAVE("rx_net_packet");
-}
-
-
-static void rx_net_mfs_packet(struct fc_info *fi, struct sk_buff *skb)
-{
-struct net_device *dev = fi->dev;
-struct fch_hdr fch;
- ENTER("rx_net_mfs_packet");
- /* Construct your Hard Header */
- memcpy(fch.daddr, skb->data + 2, FC_ALEN);
- memcpy(fch.saddr, skb->data + 10, FC_ALEN);
- skb_pull(skb, 2);
- memcpy(skb->data, fch.daddr, FC_ALEN);
- memcpy(skb->data + 6, fch.saddr, FC_ALEN);
- skb->dev = dev;
- skb->protocol = fc_type_trans(skb, dev);
- DPRINTK("protocol = %x", skb->protocol);
- netif_rx(skb);
- dev->last_rx = jiffies;
- LEAVE("rx_net_mfs_packet");
-}
-
-static int tx_exchange(struct fc_info *fi, char *data, u_int len, u_int r_ctl, u_int type, u_int d_id, u_int mtu, int int_required, u_short tx_ox_id, u_int frame_class)
-{
-u_char df_ctl;
-int NW_flag = 0, h_size, return_value;
-u_short rx_id = RX_ID_FIRST_SEQUENCE;
-u_int tachyon_status;
-u_int my_id = fi->g.my_id;
- ENTER("tx_exchange");
-
- tachyon_status = readl(fi->t_r.ptr_tach_status_reg);
- DPRINTK("Tachyon Status = %x len = %d MTU = %d", tachyon_status, len, mtu);
- if (tachyon_status & OSM_FROZEN) {
- reset_tachyon(fi, ERROR_RELEASE);
- reset_tachyon(fi, OCQ_RESET);
- DPRINTK("Tachyon Status = %x len = %d MTU = %d", tachyon_status, len, mtu);
- }
- if (tx_ox_id == OX_ID_FIRST_SEQUENCE) {
- switch(fi->g.type_of_frame) {
- case FC_SCSI_READ:
- tx_ox_id = fi->g.scsi_oxid | SCSI_READ_BIT;
- break;
- case FC_SCSI_WRITE:
- tx_ox_id = fi->g.scsi_oxid;
- break;
- default:
- tx_ox_id = fi->g.ox_id;
- break;
- }
- }
- else {
- switch(fi->g.type_of_frame) {
- case FC_SCSI_READ:
- rx_id = fi->g.scsi_oxid | SCSI_READ_BIT;
- break;
- case FC_SCSI_WRITE:
- rx_id = fi->g.scsi_oxid;
- break;
- case FC_BLS:
- rx_id = RX_ID_FIRST_SEQUENCE;
- break;
- default:
- rx_id = fi->g.ox_id;
- break;
- }
- }
-
- if (type == TYPE_LLC_SNAP) {
- df_ctl = 0x20;
- NW_flag = 1;
- /* Multi Frame Sequence ? If yes, set RO bit */
- if (len > mtu)
- type |= RELATIVE_OFF_PRESENT;
- build_tachyon_header(fi, my_id, r_ctl, d_id, type, fi->g.seq_id, df_ctl, tx_ox_id, rx_id, data - 2*FC_ALEN);
- }
- else {
- df_ctl = 0;
- /* Multi Frame Sequence ? If yes, set RO bit */
- if (len > mtu)
- type |= RELATIVE_OFF_PRESENT;
- build_tachyon_header(fi, my_id, r_ctl, d_id, type, fi->g.seq_id, df_ctl, tx_ox_id, rx_id, NULL);
- }
-
- /* Get free Tachyon Headers and EDBs */
- if (get_free_header(fi) || get_free_EDB(fi))
- return 0;
-
- if ((type & 0xFF000000) == TYPE_LLC_SNAP) {
- h_size = TACHYON_HEADER_LEN + NW_HEADER_LEN;
- memcpy(fi->q.ptr_tachyon_header[fi->q.tachyon_header_indx], &(fi->g.tach_header), h_size);
- }
- else
- memcpy(fi->q.ptr_tachyon_header[fi->q.tachyon_header_indx], &(fi->g.tach_header), TACHYON_HEADER_LEN);
-
- return_value = tx_sequence(fi, data, len, mtu, d_id, tx_ox_id, rx_id, fi->g.seq_id, NW_flag, int_required, frame_class);
-
- switch(fi->g.type_of_frame) {
- case FC_SCSI_READ:
- case FC_SCSI_WRITE:
- update_scsi_oxid(fi);
- break;
- case FC_BLS:
- break;
- default:
- fi->g.ox_id++;
- if (fi->g.ox_id == 0xFFFF)
- fi->g.ox_id = NOT_SCSI_XID;
- break;
- }
-
- if (fi->g.seq_id == MAX_SEQ_ID)
- fi->g.seq_id = 0;
- else
- fi->g.seq_id++;
- LEAVE("tx_exchange");
- return return_value;
-}
-
-static int tx_sequence(struct fc_info *fi, char *data, u_int len, u_int mtu, u_int d_id, u_short ox_id, u_short rx_id, u_char seq_id, int NW_flag, int int_required, u_int frame_class)
-{
-u_int cntl = 0;
-int return_value;
- ENTER("tx_sequence");
- build_EDB(fi, data, EDB_END, len);
- memcpy(fi->q.ptr_edb[fi->q.edb_buffer_indx], &(fi->g.edb), sizeof(EDB));
- build_ODB(fi, seq_id, d_id, len, cntl, mtu, ox_id, rx_id, NW_flag, int_required, frame_class);
- memcpy(fi->q.ptr_odb[fi->q.ocq_prod_indx], &(fi->g.odb), sizeof(ODB));
- if (fi->g.link_up != TRUE) {
- DPRINTK2("Fibre Channel Link not up. Dropping Exchange!");
- return_value = FALSE;
- }
- else {
- /* To be on the safe side, a check should be included
- * at this point to check if we are overrunning
- * Tachyon.
- */
- update_OCQ_indx(fi);
- return_value = TRUE;
- }
- update_EDB_indx(fi);
- update_tachyon_header_indx(fi);
- LEAVE("tx_sequence");
- return return_value;
-}
-
-static int get_free_header(struct fc_info *fi)
-{
-u_short temp_ox_id;
-u_int *tach_header, initial_indx = fi->q.tachyon_header_indx;
- /* Check if the header is in use.
- * We could have an outstanding command.
- * We should find a free slot as we can queue a
- * maximum of 32 SCSI commands only.
- */
- tach_header = fi->q.ptr_tachyon_header[fi->q.tachyon_header_indx];
- temp_ox_id = ntohl(*(tach_header + 6)) >> 16;
- /* We care about the SCSI writes only. Those are the wicked ones
- * that need an additional set of buffers.
- */
- while(temp_ox_id <= MAX_SCSI_XID) {
- update_tachyon_header_indx(fi);
- if (fi->q.tachyon_header_indx == initial_indx) {
- /* Should never happen.
- */
- T_MSG("No free Tachyon headers available");
- reset_tachyon(fi, SOFTWARE_RESET);
- return 1;
- }
- tach_header = fi->q.ptr_tachyon_header[fi->q.tachyon_header_indx];
- temp_ox_id = ntohl(*(tach_header + 6)) >> 16;
- }
- return 0;
-}
-
-static int get_free_EDB(struct fc_info *fi)
-{
-unsigned int initial_indx = fi->q.edb_buffer_indx;
- /* Check if the EDB is in use.
- * We could have an outstanding SCSI Write command.
- * We should find a free slot as we can queue a
- * maximum of 32 SCSI commands only.
- */
- while (fi->q.free_edb_list[fi->q.edb_buffer_indx] != EDB_FREE) {
- update_EDB_indx(fi);
- if (fi->q.edb_buffer_indx == initial_indx) {
- T_MSG("No free EDB buffers avaliable")
- reset_tachyon(fi, SOFTWARE_RESET);
- return 1;
- }
- }
- return 0;
-}
-
-static int validate_login(struct fc_info *fi, u_int *base_ptr)
-{
-struct fc_node_info *q = fi->node_info_list;
-char n_port_name[PORT_NAME_LEN];
-char node_name[NODE_NAME_LEN];
-u_int s_id;
- ENTER("validate_login");
- /*index to Port Name in the payload. We need the 8 byte Port Name */
- memcpy(n_port_name, base_ptr + 10, PORT_NAME_LEN);
- memcpy(node_name, base_ptr + 12, NODE_NAME_LEN);
- s_id = ntohl(*(base_ptr + 3)) & 0x00FFFFFF;
-
- /* check if Fibre Channel IDs have changed */
- while(q != NULL) {
- if (memcmp(n_port_name, q->hw_addr, PORT_NAME_LEN) == 0) {
- if ((s_id != q->d_id) || (memcmp(node_name, q->node_name, NODE_NAME_LEN) != 0)) {
- DPRINTK1("Fibre Channel ID of Node has changed. Txing LOGO.");
- return 0;
- }
- q->login = LOGIN_COMPLETED;
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- return 1;
- }
- q = q->next;
- }
- DPRINTK1("Port Name does not match. Txing LOGO.");
- LEAVE("validate_login");
- return 0;
-}
-
-static void add_to_address_cache(struct fc_info *fi, u_int *base_ptr)
-{
-int size = sizeof(struct fc_node_info);
-struct fc_node_info *p, *q = fi->node_info_list, *r = NULL;
-char n_port_name[PORT_NAME_LEN];
-u_int s_id;
- ENTER("add_to_address_cache");
- /*index to Port Name in the payload. We need the 8 byte Port Name */
- memcpy(n_port_name, base_ptr + 13, PORT_NAME_LEN);
- s_id = ntohl(*(base_ptr + 3)) & 0x00FFFFFF;
-
- /* check if info already exists */
- while(q != NULL) {
- if (memcmp(n_port_name, q->hw_addr, PORT_NAME_LEN) == 0) {
- if (s_id != q->d_id) {
- memcpy(&(q->c_of_s[0]), base_ptr + 17, 3 * sizeof(CLASS_OF_SERVICE));
- q->mtu = ntohl(*(base_ptr + 10)) & 0x00000FFF;
- q->d_id = s_id;
- memcpy(q->node_name, base_ptr + 15, NODE_NAME_LEN);
- }
- q->login = LOGIN_COMPLETED;
- q->scsi = FALSE;
- fi->num_nodes++;
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- return;
- }
- r = q;
- q = q->next;
- }
- p = (struct fc_node_info *)kmalloc(size, GFP_ATOMIC);
- if (p == NULL) {
- T_MSG("kmalloc failed in add_to_address_cache()");
- return;
- }
- memcpy(&(p->c_of_s[0]), base_ptr + 17, 3 * sizeof(CLASS_OF_SERVICE));
- p->mtu = ntohl(*(base_ptr + 10)) & 0x00000FFF;
- p->d_id = s_id;
- memcpy(p->hw_addr, base_ptr + 13, PORT_NAME_LEN);
- memcpy(p->node_name, base_ptr + 15, NODE_NAME_LEN);
- p->login = LOGIN_COMPLETED;
- p->scsi = FALSE;
- p->target_id = 0xFF;
- p->next = NULL;
- if (fi->node_info_list == NULL)
- fi->node_info_list = p;
- else
- r->next = p;
- fi->num_nodes++;
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- LEAVE("add_to_address_cache");
- return;
-}
-
-static void remove_from_address_cache(struct fc_info *fi, u_int *base_ptr, u_int cmnd_code)
-{
-struct fc_node_info *q = fi->node_info_list;
-u_int s_id;
- ENTER("remove_from_address_cache");
- s_id = ntohl(*(base_ptr + 3)) & 0x00FFFFFF;
- switch(cmnd_code) {
- case ELS_LOGO:
- /* check if info exists */
- while (q != NULL) {
- if (s_id == q->d_id) {
- if (q->login == LOGIN_COMPLETED)
- q->login = LOGIN_ATTEMPTED;
- if (fi->num_nodes > 0)
- fi->num_nodes--;
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- return;
- }
- q = q->next;
- }
- DPRINTK1("ELS_LOGO received from node 0x%x which is not logged-in", s_id);
- break;
- case ELS_RSCN:
- {
- int payload_len = ntohl(*(base_ptr + 8)) & 0xFF;
- int no_of_pages, i;
- u_char address_format;
- u_short received_ox_id = ntohl(*(base_ptr + 6)) >> 16;
- u_int node_id, mask, *page_ptr = base_ptr + 9;
- if ((payload_len < 4) || (payload_len > 256)) {
- DPRINTK1("RSCN with invalid payload length received");
- tx_ls_rjt(fi, s_id, received_ox_id, LOGICAL_ERR, RECV_FIELD_SIZE);
- return;
- }
- /* Page_size includes the Command Code */
- no_of_pages = (payload_len / 4) - 1;
- for (i = 0; i < no_of_pages; i++) {
- address_format = ntohl(*page_ptr) >> 24;
- node_id = ntohl(*page_ptr) & 0x00FFFFFF;
- switch(address_format) {
- case PORT_ADDRESS_FORMAT:
- rscn_handler(fi, node_id);
- break;
- case AREA_ADDRESS_FORMAT:
- case DOMAIN_ADDRESS_FORMAT:
- if (address_format == AREA_ADDRESS_FORMAT)
- mask = 0xFFFF00;
- else
- mask = 0xFF0000;
- while(q != NULL) {
- if ((q->d_id & mask) == (node_id & mask))
- rscn_handler(fi, q->d_id);
- q = q->next;
- }
- /* There might be some new nodes to be
- * discovered. But, some of the earlier
- * requests as a result of the RSCN might be
- * in progress. We don't want to duplicate that
- * effort. So letz call SCR after a lag.
- */
- fi->explore_timer.function = scr_timer;
- fi->explore_timer.data = (unsigned long)fi;
- fi->explore_timer.expires = RUN_AT((no_of_pages*3*HZ)/100);
- init_timer(&fi->explore_timer);
- add_timer(&fi->explore_timer);
- break;
- default:
- T_MSG("RSCN with invalid address format received");
- tx_ls_rjt(fi, s_id, received_ox_id, LOGICAL_ERR, NO_EXPLN);
- }
- page_ptr += 1;
- } /* end of for loop */
- } /* end of case RSCN: */
- break;
- }
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- LEAVE("remove_from_address_cache");
-}
-
-static void rscn_handler(struct fc_info *fi, u_int node_id)
-{
-struct fc_node_info *q = fi->node_info_list;
-int login_state = sid_logged_in(fi, node_id);
- if ((login_state == NODE_LOGGED_IN) || (login_state == NODE_PROCESS_LOGGED_IN)) {
- while(q != NULL) {
- if (q->d_id == node_id) {
- q->login = LOGIN_ATTEMPTED;
- if (fi->num_nodes > 0)
- fi->num_nodes--;
- break;
- }
- else
- q = q->next;
- }
- }
- else
- if (login_state == NODE_LOGGED_OUT)
- tx_adisc(fi, ELS_ADISC, node_id, OX_ID_FIRST_SEQUENCE);
- else
- if (login_state == NODE_LOGGED_OUT)
- tx_logi(fi, ELS_PLOGI, node_id);
-}
-
-static void scr_timer(unsigned long data)
-{
-struct fc_info *fi = (struct fc_info *)data;
- del_timer(&fi->explore_timer);
- tx_name_server_req(fi, FCS_GP_ID4);
-}
-
-static int sid_logged_in(struct fc_info *fi, u_int s_id)
-{
-struct fc_node_info *temp = fi->node_info_list;
- while(temp != NULL)
- if ((temp->d_id == s_id) && (temp->login == LOGIN_COMPLETED)) {
- if (temp->scsi != FALSE)
- return NODE_PROCESS_LOGGED_IN;
- else
- return NODE_LOGGED_IN;
- }
- else
- if ((temp->d_id == s_id) && (temp->login != LOGIN_COMPLETED))
- return NODE_LOGGED_OUT;
- else
- temp = temp->next;
- return NODE_NOT_PRESENT;
-}
-
-static void mark_scsi_sid(struct fc_info *fi, u_int *buff_addr, u_char action)
-{
-struct fc_node_info *temp = fi->node_info_list;
-u_int s_id;
-u_int service_params;
- s_id = ntohl(*(buff_addr + 3)) & 0x00FFFFFF;
- service_params = ntohl(*(buff_addr + 12)) & 0x000000F0;
- while(temp != NULL)
- if ((temp->d_id == s_id) && (temp->login == LOGIN_COMPLETED)) {
- if (action == DELETE_ENTRY) {
- temp->scsi = FALSE;
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- return;
- }
- /* Check if it is a SCSI Target */
- if (!(service_params & TARGET_FUNC)) {
- temp->scsi = INITIATOR;
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- return;
- }
- temp->scsi = TARGET;
- /* This helps to maintain the target_id no matter what your
- * Fibre Channel ID is.
- */
- if (temp->target_id == 0xFF) {
- if (fi->g.no_of_targets <= MAX_SCSI_TARGETS)
- temp->target_id = fi->g.no_of_targets++;
- else
- T_MSG("MAX TARGETS reached!");
- }
- else
- DPRINTK1("Target_id %d already present", temp->target_id);
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- return;
- }
- else
- temp = temp->next;
- return;
-}
-
-static int node_logged_in_prev(struct fc_info *fi, u_int *buff_addr)
-{
-struct fc_node_info *temp;
-u_char *data = (u_char *)buff_addr;
-u_int s_id;
-char node_name[NODE_NAME_LEN];
- s_id = ntohl(*(buff_addr + 3)) & 0x00FFFFFF;
- memcpy(node_name, buff_addr + 12, NODE_NAME_LEN);
- /* point to port_name in the ADISC payload */
- data += 10 * 4;
- /* point to last 6 bytes of port_name */
- data += 2;
- temp = look_up_cache(fi, data);
- if (temp != NULL) {
- if ((temp->d_id == s_id) && (memcmp(node_name, temp->node_name, NODE_NAME_LEN) == 0)) {
- temp->login = LOGIN_COMPLETED;
-#if DEBUG_5526_2
- display_cache(fi);
-#endif
- return TRUE;
- }
- }
- return FALSE;
-}
-
-static struct fc_node_info *look_up_cache(struct fc_info *fi, char *data)
-{
-struct fc_node_info *temp_list = fi->node_info_list, *q;
-u_char n_port_name[FC_ALEN], temp_addr[FC_ALEN];
- ENTER("look_up_cache");
- memcpy(n_port_name, data, FC_ALEN);
- while(temp_list) {
- if (memcmp(n_port_name, &(temp_list->hw_addr[2]), FC_ALEN) == 0)
- return temp_list;
- else
- temp_list = temp_list->next;
- }
-
- /* Broadcast IP ?
- */
- temp_addr[0] = temp_addr[1] = temp_addr[2] = 0xFF;
- temp_addr[3] = temp_addr[4] = temp_addr[5] = 0xFF;
- if (memcmp(n_port_name, temp_addr, FC_ALEN) == 0) {
- q = (struct fc_node_info *)kmalloc(sizeof(struct fc_node_info), GFP_ATOMIC);
- if (q == NULL) {
- T_MSG("kmalloc failed in look_up_cache()");
- return NULL;
- }
- q->d_id = BROADCAST;
- return q;
- }
- LEAVE("look_up_cache");
- return NULL;
-}
-
-static int display_cache(struct fc_info *fi)
-{
-struct fc_node_info *q = fi->node_info_list;
-#if DEBUG_5526_2
-struct ox_id_els_map *temp_ox_id_list = fi->ox_id_list;
-#endif
-int count = 0, j;
- printk("\nFibre Channel Node Information for %s\n", fi->name);
- printk("My FC_ID = %x, My WWN = %x %x, ", fi->g.my_id, fi->g.my_node_name_high, fi->g.my_node_name_low);
- if (fi->g.ptp_up == TRUE)
- printk("Port_Type = N_Port\n");
- if (fi->g.loop_up == TRUE)
- printk("Port_Type = L_Port\n");
- while(q != NULL) {
- printk("WWN = ");
- for (j = 0; j < PORT_NAME_LEN; j++)
- printk("%x ", q->hw_addr[j]);
- printk("FC_ID = %x, ", q->d_id);
- printk("Login = ");
- if (q->login == LOGIN_COMPLETED)
- printk("ON ");
- else
- printk("OFF ");
- if (q->scsi == TARGET)
- printk("Target_ID = %d ", q->target_id);
- printk("\n");
- q = q->next;
- count++;
- }
-
-#if DEBUG_5526_2
- printk("OX_ID -> ELS Map\n");
- while(temp_ox_id_list) {
- printk("ox_id = %x, ELS = %x\n", temp_ox_id_list->ox_id, temp_ox_id_list->els);
- temp_ox_id_list = temp_ox_id_list->next;
- }
-#endif
-
- return 0;
-}
-
-static struct net_device_stats * iph5526_get_stats(struct net_device *dev)
-{
-struct fc_info *fi = dev->priv;
- return (struct net_device_stats *) &fi->fc_stats;
-}
-
-
-/* SCSI stuff starts here */
-
-int iph5526_detect(Scsi_Host_Template *tmpt)
-{
- struct Scsi_Host *host = NULL;
- struct iph5526_hostdata *hostdata;
- struct fc_info *fi = NULL;
- int no_of_hosts = 0, i, j, count = 0;
- u_int pci_maddr = 0;
- struct pci_dev *pdev = NULL;
- unsigned long timeout;
-
- tmpt->proc_name = "iph5526";
-
- for (i = 0; i <= MAX_FC_CARDS; i++)
- fc[i] = NULL;
-
- for (i = 0; clone_list[i].vendor_id != 0; i++)
- while ((pdev = pci_find_device(clone_list[i].vendor_id, clone_list[i].device_id, pdev))) {
- unsigned short pci_command;
- if (pci_enable_device(pdev))
- continue;
- if (count < MAX_FC_CARDS) {
- fc[count] = kmalloc(sizeof(struct fc_info), GFP_ATOMIC);
- if (fc[count] == NULL) {
- printk("iph5526.c: Unable to register card # %d\n", count + 1);
- return no_of_hosts;
- }
- memset(fc[count], 0, sizeof(struct fc_info));
- }
- else {
- printk("iph5526.c: Maximum Number of cards reached.\n");
- return no_of_hosts;
- }
-
- fi = fc[count];
- sprintf(fi->name, "fc%d", count);
-
- host = scsi_register(tmpt, sizeof(struct iph5526_hostdata));
- if(host==NULL) {
- kfree(fc[count]);
- return no_of_hosts;
- }
-
- hostdata = (struct iph5526_hostdata *)host->hostdata;
- memset(hostdata, 0 , sizeof(struct iph5526_hostdata));
- for (j = 0; j < MAX_SCSI_TARGETS; j++)
- hostdata->tag_ages[j] = jiffies;
- hostdata->fi = fi;
- fi->host = host;
- //host->max_id = MAX_SCSI_TARGETS;
- host->max_id = 5;
- host->this_id = tmpt->this_id;
-
- pci_maddr = pci_resource_start(pdev, 0);
- if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
- printk("iph5526.c : Cannot find proper PCI device base address.\n");
- scsi_unregister(host);
- kfree(fc[count]);
- fc[count] = NULL;
- continue;
- }
-
- DPRINTK("pci_maddr = %x", pci_maddr);
- pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-
- pci_irq_line = pdev->irq;
- printk("iph5526.c: PCI BIOS reports %s at i/o %#x, irq %d.\n", clone_list[i].name, pci_maddr, pci_irq_line);
- fi->g.mem_base = ioremap(pci_maddr & PAGE_MASK, 1024);
-
- /* We use Memory Mapped IO. The initial space contains the
- * PCI Configuration registers followed by the (i) chip
- * registers followed by the Tachyon registers.
- */
- /* Thatz where (i)chip maps Tachyon Address Space.
- */
- fi->g.tachyon_base = (u_long)fi->g.mem_base + TACHYON_OFFSET + ( pci_maddr & ~PAGE_MASK );
- DPRINTK("fi->g.tachyon_base = %x", (u_int)fi->g.tachyon_base);
- if (fi->g.mem_base == NULL) {
- printk("iph5526.c : ioremap failed!!!\n");
- scsi_unregister(host);
- kfree(fc[count]);
- fc[count] = NULL;
- continue;
- }
- DPRINTK("IRQ1 = %d\n", pci_irq_line);
- printk(version);
- fi->base_addr = (long) pdev;
-
- if (pci_irq_line) {
- int irqval = 0;
- /* Found it, get IRQ.
- */
- irqval = request_irq(pci_irq_line, &tachyon_interrupt, pci_irq_line ? SA_SHIRQ : 0, fi->name, host);
- if (irqval) {
- printk("iph5526.c : Unable to get IRQ %d (irqval = %d).\n", pci_irq_line, irqval);
- scsi_unregister(host);
- kfree(fc[count]);
- fc[count] = NULL;
- continue;
- }
- host->irq = fi->irq = pci_irq_line;
- pci_irq_line = 0;
- fi->clone_id = clone_list[i].vendor_id;
- }
-
- if (!initialize_register_pointers(fi) || !tachyon_init(fi)) {
- printk("iph5526.c: TACHYON initialization failed for card # %d!!!\n", count + 1);
- free_irq(host->irq, host);
- scsi_unregister(host);
- if (fi)
- clean_up_memory(fi);
- kfree(fc[count]);
- fc[count] = NULL;
- break;
- }
- DPRINTK1("Fibre Channel card initialized");
- /* Wait for the Link to come up and the login process
- * to complete.
- */
- for(timeout = jiffies + 10*HZ; time_before(jiffies, timeout) && ((fi->g.link_up == FALSE) || (fi->g.port_discovery == TRUE) || (fi->g.explore_fabric == TRUE) || (fi->g.perform_adisc == TRUE));)
- {
- cpu_relax();
- barrier();
- }
-
- count++;
- no_of_hosts++;
- }
- DPRINTK1("no_of_hosts = %d",no_of_hosts);
-
- /* This is to make sure that the ACC to the PRLI comes in
- * for the last ALPA.
- */
- mdelay(1000); /* Ugly! Let the Gods forgive me */
-
- DPRINTK1("leaving iph5526_detect\n");
- return no_of_hosts;
-}
-
-
-int iph5526_biosparam(struct scsi_device *sdev, struct block_device *n,
- sector_t capacity, int ip[])
-{
-int size = capacity;
- ip[0] = 64;
- ip[1] = 32;
- ip[2] = size >> 11;
- if (ip[2] > 1024) {
- ip[0] = 255;
- ip[1] = 63;
- ip[2] = size / (ip[0] * ip[1]);
- }
- return 0;
-}
-
-int iph5526_queuecommand(Scsi_Cmnd *Cmnd, void (*done) (Scsi_Cmnd *))
-{
-int int_required = 0;
-u_int r_ctl = FC4_DEVICE_DATA | UNSOLICITED_COMMAND;
-u_int type = TYPE_FCP | SEQUENCE_INITIATIVE;
-u_int frame_class = Cmnd->device->id;
-u_short ox_id = OX_ID_FIRST_SEQUENCE;
-struct Scsi_Host *host = Cmnd->device->host;
-struct iph5526_hostdata *hostdata = (struct iph5526_hostdata*)host->hostdata;
-struct fc_info *fi = hostdata->fi;
-struct fc_node_info *q;
-u_long flags;
- ENTER("iph5526_queuecommand");
-
- spin_lock_irqsave(&fi->fc_lock, flags);
- Cmnd->scsi_done = done;
-
- if (Cmnd->device->tagged_supported) {
- switch(Cmnd->tag) {
- case SIMPLE_QUEUE_TAG:
- hostdata->cmnd.fcp_cntl = FCP_CNTL_QTYPE_SIMPLE;
- break;
- case HEAD_OF_QUEUE_TAG:
- hostdata->cmnd.fcp_cntl = FCP_CNTL_QTYPE_HEAD_OF_Q;
- break;
- case ORDERED_QUEUE_TAG:
- hostdata->cmnd.fcp_cntl = FCP_CNTL_QTYPE_ORDERED;
- break;
- default:
- if ((jiffies - hostdata->tag_ages[Cmnd->device->id]) > (5 * HZ)) {
- hostdata->cmnd.fcp_cntl = FCP_CNTL_QTYPE_ORDERED;
- hostdata->tag_ages[Cmnd->device->id] = jiffies;
- }
- else
- hostdata->cmnd.fcp_cntl = FCP_CNTL_QTYPE_SIMPLE;
- break;
- }
- }
- /*else
- hostdata->cmnd.fcp_cntl = FCP_CNTL_QTYPE_UNTAGGED;
- */
-
- hostdata->cmnd.fcp_addr[3] = 0;
- hostdata->cmnd.fcp_addr[2] = 0;
- hostdata->cmnd.fcp_addr[1] = 0;
- hostdata->cmnd.fcp_addr[0] = htons(Cmnd->device->lun);
-
- memcpy(&hostdata->cmnd.fcp_cdb, Cmnd->cmnd, Cmnd->cmd_len);
- hostdata->cmnd.fcp_data_len = htonl(Cmnd->request_bufflen);
-
- /* Get an used OX_ID. We could have pending commands.
- */
- if (get_scsi_oxid(fi)) {
- spin_unlock_irqrestore(&fi->fc_lock, flags);
- return 1;
- }
- fi->q.free_scsi_oxid[fi->g.scsi_oxid] = OXID_INUSE;
-
- /* Maintain a handler so that we can associate the done() function
- * on completion of the SCSI command.
- */
- hostdata->cmnd_handler[fi->g.scsi_oxid] = Cmnd;
-
- switch(Cmnd->cmnd[0]) {
- case WRITE_6:
- case WRITE_10:
- case WRITE_12:
- fi->g.type_of_frame = FC_SCSI_WRITE;
- hostdata->cmnd.fcp_cntl = htonl(FCP_CNTL_WRITE | hostdata->cmnd.fcp_cntl);
- break;
- default:
- fi->g.type_of_frame = FC_SCSI_READ;
- hostdata->cmnd.fcp_cntl = htonl(FCP_CNTL_READ | hostdata->cmnd.fcp_cntl);
- }
-
- memcpy(fi->q.ptr_fcp_cmnd[fi->q.fcp_cmnd_indx], &(hostdata->cmnd), sizeof(fcp_cmd));
-
- q = resolve_target(fi, Cmnd->device->id);
-
- if (q == NULL) {
- u_int bad_id = fi->g.my_ddaa | 0xFE;
- /* We transmit to an non-existant AL_PA so that the "done"
- * function can be called while receiving the interrupt
- * due to a Timeout for a bad AL_PA. In a PTP configuration,
- * the int_required field is set, since there is no notion
- * of AL_PAs. This approach sucks, but works alright!
- */
- if (fi->g.ptp_up == TRUE)
- int_required = 1;
- tx_exchange(fi, (char *)(&(hostdata->cmnd)), sizeof(fcp_cmd), r_ctl, type, bad_id, fi->g.my_mtu, int_required, ox_id, FC_SCSI_BAD_TARGET);
- spin_unlock_irqrestore(&fi->fc_lock, flags);
- DPRINTK1("Target ID %x not present", Cmnd->target);
- return 0;
- }
- if (q->login == LOGIN_COMPLETED) {
- if (add_to_sest(fi, Cmnd, q)) {
- DPRINTK1("add_to_sest() failed.");
- spin_unlock_irqrestore(&fi->fc_lock, flags);
- return 0;
- }
- tx_exchange(fi, (char *)(fi->q.ptr_fcp_cmnd[fi->q.fcp_cmnd_indx]), sizeof(fcp_cmd), r_ctl, type, q->d_id, q->mtu, int_required, ox_id, frame_class << 16);
- update_FCP_CMND_indx(fi);
- }
- spin_unlock_irqrestore(&fi->fc_lock, flags);
- /* If q != NULL, then we have a SCSI Target.
- * If q->login != LOGIN_COMPLETED, then that device could be
- * offline temporarily. So we let the command to time-out.
- */
- LEAVE("iph5526_queuecommand");
- return 0;
-}
-
-int iph5526_abort(Scsi_Cmnd *Cmnd)
-{
-struct Scsi_Host *host = Cmnd->device->host;
-struct iph5526_hostdata *hostdata = (struct iph5526_hostdata *)host->hostdata;
-struct fc_info *fi = hostdata->fi;
-struct fc_node_info *q;
-u_int r_ctl = FC4_DEVICE_DATA | UNSOLICITED_COMMAND;
-u_int type = TYPE_FCP | SEQUENCE_INITIATIVE;
-u_short ox_id = OX_ID_FIRST_SEQUENCE;
-int int_required = 1, i, abort_status = FALSE;
-u_long flags;
-
- ENTER("iph5526_abort");
-
- spin_lock_irqsave(&fi->fc_lock, flags);
-
- q = resolve_target(fi, Cmnd->device->id);
- if (q == NULL) {
- u_int bad_id = fi->g.my_ddaa | 0xFE;
- /* This should not happen as we should always be able to
- * resolve a target id. But, jus in case...
- * We transmit to an non-existant AL_PA so that the done
- * function can be called while receiving the interrupt
- * for a bad AL_PA.
- */
- DPRINTK1("Unresolved Target ID!");
- tx_exchange(fi, (char *)(&(hostdata->cmnd)), sizeof(fcp_cmd), r_ctl, type, bad_id, fi->g.my_mtu, int_required, ox_id, FC_SCSI_BAD_TARGET);
- DPRINTK1("Target ID %x not present", Cmnd->target);
- spin_unlock_irqrestore(&fi->fc_lock, flags);
- return FAILED;
- }
-
- /* If q != NULL, then we have a SCSI Target. If
- * q->login != LOGIN_COMPLETED, then that device could
- * be offline temporarily. So we let the command to time-out.
- */
-
- /* Get the OX_ID for the Command to be aborted.
- */
- for (i = 0; i <= MAX_SCSI_XID; i++) {
- if (hostdata->cmnd_handler[i] == Cmnd) {
- hostdata->cmnd_handler[i] = NULL;
- ox_id = i;
- break;
- }
- }
- if (i > MAX_SCSI_XID) {
- T_MSG("Command could not be resolved to OX_ID");
- spin_unlock_irqrestore(&fi->fc_lock, flags);
- return FAILED;
- }
-
- switch(Cmnd->cmnd[0]) {
- case WRITE_6:
- case WRITE_10:
- case WRITE_12:
- break;
- default:
- ox_id |= SCSI_READ_BIT;
- }
- abort_status = abort_exchange(fi, ox_id);
-
- if ((q->login == LOGIN_COMPLETED) && (abort_status == TRUE)) {
- /* Then, transmit an ABTS to the target. The rest
- * is done when the BA_ACC is received for the ABTS.
- */
- tx_abts(fi, q->d_id, ox_id);
- }
- else {
- u_int STE_bit;
- u_short x_id;
- /* Invalidate resources for that Exchange.
- */
- x_id = ox_id & MAX_SCSI_XID;
- STE_bit = ntohl(*fi->q.ptr_sest[x_id]);
- if (STE_bit & SEST_V) {
- *(fi->q.ptr_sest[x_id]) &= htonl(SEST_INV);
- invalidate_SEST_entry(fi, ox_id);
- }
- }
-
- LEAVE("iph5526_abort");
- spin_unlock_irqrestore(&fi->fc_lock, flags);
- return SUCCESS;
-}
-
-static int abort_exchange(struct fc_info *fi, u_short ox_id)
-{
-u_short x_id;
-volatile u_int flush_SEST, STE_bit;
- x_id = ox_id & MAX_SCSI_XID;
- DPRINTK1("Aborting Exchange %x", ox_id);
-
- STE_bit = ntohl(*fi->q.ptr_sest[x_id]);
- /* Is the Exchange still active?.
- */
- if (STE_bit & SEST_V) {
- if (ox_id & SCSI_READ_BIT) {
- /* If the Exchange to be aborted is Inbound,
- * Flush the SEST Entry from Tachyon's Cache.
- */
- *(fi->q.ptr_sest[x_id]) &= htonl(SEST_INV);
- flush_tachyon_cache(fi, ox_id);
- flush_SEST = readl(fi->t_r.ptr_tach_flush_oxid_reg);
- while ((flush_SEST & 0x80000000) != 0)
- flush_SEST = readl(fi->t_r.ptr_tach_flush_oxid_reg);
- STE_bit = ntohl(*fi->q.ptr_sest[x_id]);
- while ((STE_bit & 0x80000000) != 0)
- STE_bit = ntohl(*fi->q.ptr_sest[x_id]);
- flush_SEST = readl(fi->t_r.ptr_tach_flush_oxid_reg);
- invalidate_SEST_entry(fi, ox_id);
- }
- else {
- int i;
- u_int *ptr_edb;
- /* For In-Order Reassembly, the following is done:
- * First, write zero as the buffer length in the EDB.
- */
- ptr_edb = bus_to_virt(ntohl(*(fi->q.ptr_sest[x_id] + 7)));
- for (i = 0; i < EDB_LEN; i++)
- if (fi->q.ptr_edb[i] == ptr_edb)
- break;
- if (i < EDB_LEN)
- *ptr_edb = *ptr_edb & 0x0000FFFF;
- else
- T_MSG("EDB not found while clearing in abort_exchange()");
- }
- DPRINTK1("Exchange %x invalidated", ox_id);
- return TRUE;
- }
- else {
- DPRINTK1("SEST Entry for exchange %x not valid", ox_id);
- return FALSE;
- }
-}
-
-static void flush_tachyon_cache(struct fc_info *fi, u_short ox_id)
-{
-volatile u_int tachyon_status;
- if (fi->g.loop_up == TRUE) {
- writel(HOST_CONTROL, fi->t_r.ptr_fm_control_reg);
- /* Make sure that the Inbound FIFO is empty.
- */
- do {
- tachyon_status = readl(fi->t_r.ptr_tach_status_reg);
- udelay(200);
- }while ((tachyon_status & RECEIVE_FIFO_EMPTY) == 0);
- /* Ok. Go ahead and flushhhhhhhhh!
- */
- writel(0x80000000 | ox_id, fi->t_r.ptr_tach_flush_oxid_reg);
- writel(EXIT_HOST_CONTROL, fi->t_r.ptr_fm_control_reg);
- return;
- }
- if (fi->g.ptp_up == TRUE) {
- take_tachyon_offline(fi);
- /* Make sure that the Inbound FIFO is empty.
- */
- do {
- tachyon_status = readl(fi->t_r.ptr_tach_status_reg);
- udelay(200);
- }while ((tachyon_status & RECEIVE_FIFO_EMPTY) == 0);
- writel(0x80000000 | ox_id, fi->t_r.ptr_tach_flush_oxid_reg);
- /* Write the Initialize command to the FM Control reg.
- */
- fi->g.n_port_try = TRUE;
- DPRINTK1("In abort_exchange, TACHYON initializing as N_Port...\n");
- writel(INITIALIZE, fi->t_r.ptr_fm_control_reg);
- }
-}
-
-static struct fc_node_info *resolve_target(struct fc_info *fi, u_char target)
-{
-struct fc_node_info *temp = fi->node_info_list;
- while(temp != NULL)
- if (temp->target_id == target) {
- if ((temp->scsi == TARGET) && (temp->login == LOGIN_COMPLETED))
- return temp;
- else {
- if (temp->login != LOGIN_COMPLETED) {
- /* The Target is not currently logged in.
- * It could be a Target on the Local Loop or
- * on a Remote Loop connected through a switch.
- * In either case, we will know whenever the Target
- * comes On-Line again. We let the command to
- * time-out so that it gets retried.
- */
- T_MSG("Target %d not logged in.", temp->target_id);
- tx_logi(fi, ELS_PLOGI, temp->d_id);
- return temp;
- }
- else {
- if (temp->scsi != TARGET) {
- /* For some reason, we did not get a response to
- * PRLI. Letz try it again...
- */
- DPRINTK1("Node not PRLIied. Txing PRLI...");
- tx_prli(fi, ELS_PRLI, temp->d_id, OX_ID_FIRST_SEQUENCE);
- }
- }
- return temp;
- }
- }
- else
- temp = temp->next;
- return NULL;
-}
-
-static int add_to_sest(struct fc_info *fi, Scsi_Cmnd *Cmnd, struct fc_node_info *ni)
-{
-/* we have at least 1 buffer, the terminator */
-int no_of_sdb_buffers = 1, i;
-int no_of_edb_buffers = 0;
-u_int *req_buffer = (u_int *)Cmnd->request_buffer;
-u_int *ptr_sdb = NULL;
-struct scatterlist *sl1, *sl2 = NULL;
-int no_of_sg = 0;
-
- switch(fi->g.type_of_frame) {
- case FC_SCSI_READ:
- fi->g.inb_sest_entry.flags_and_byte_offset = htonl(INB_SEST_VED);
- fi->g.inb_sest_entry.byte_count = 0;
- fi->g.inb_sest_entry.no_of_recvd_frames = 0;
- fi->g.inb_sest_entry.no_of_expected_frames = 0;
- fi->g.inb_sest_entry.last_fctl = 0;
-
- if (Cmnd->use_sg) {
- no_of_sg = Cmnd->use_sg;
- sl1 = sl2 = (struct scatterlist *)Cmnd->request_buffer;
- for (i = 0; i < no_of_sg; i++) {
- no_of_sdb_buffers += sl1->length / SEST_BUFFER_SIZE;
- if (sl1->length % SEST_BUFFER_SIZE)
- no_of_sdb_buffers++;
- sl1++;
- }
- }
- else {
- no_of_sdb_buffers += Cmnd->request_bufflen / SEST_BUFFER_SIZE;
- if (Cmnd->request_bufflen % SEST_BUFFER_SIZE)
- no_of_sdb_buffers++;
- } /* if !use_sg */
-
- /* We are working with the premise that at the max we would
- * get a scatter-gather buffer containing 63 buffers
- * of size 1024 bytes each. Is it a _bad_ assumption?
- */
- if (no_of_sdb_buffers > 512) {
- T_MSG("Number of SDB buffers needed = %d", no_of_sdb_buffers);
- T_MSG("Disable Scatter-Gather!!!");
- return 1;
- }
-
-
- /* Store it in the sdb_table so that we can retrieve that
- * free up the memory when the Read Command completes.
- */
- if (get_free_SDB(fi))
- return 1;
- ptr_sdb = fi->q.ptr_sdb_slot[fi->q.sdb_indx];
- fi->q.sdb_slot_status[fi->q.sdb_indx] = SDB_BUSY;
- fi->g.inb_sest_entry.sdb_address = htonl(virt_to_bus(ptr_sdb));
-
- if (Cmnd->use_sg) {
- int count = 0, j;
- for(i = 0; i < no_of_sg; i++) {
- char *addr_ptr = sl2->address;
- count = sl2->length / SEST_BUFFER_SIZE;
- if (sl2->length % SEST_BUFFER_SIZE)
- count++;
- for (j = 0; j < count; j++) {
- *(ptr_sdb) = htonl(virt_to_bus(addr_ptr));
- addr_ptr += SEST_BUFFER_SIZE;
- ptr_sdb++;
- }
- count = 0;
- sl2++;
- }
- }
- else {
- for (i = 0; i < no_of_sdb_buffers - 1; i++) {
- *(ptr_sdb) = htonl(virt_to_bus(req_buffer));
- req_buffer += SEST_BUFFER_SIZE/4;
- ptr_sdb++;
- }
- }
- *(ptr_sdb) = htonl(0x1); /* Terminator */
-
- /* The scratch pad is used to hold the index into the SDB.
- */
- fi->g.inb_sest_entry.scratch_pad = fi->q.sdb_indx;
- fi->g.inb_sest_entry.expected_ro = 0;
- fi->g.inb_sest_entry.buffer_index = 0;
- fi->g.inb_sest_entry.buffer_offset = 0;
- memcpy(fi->q.ptr_sest[fi->g.scsi_oxid], &fi->g.inb_sest_entry, sizeof(INB_SEST_ENTRY));
- break;
- case FC_SCSI_WRITE:
- fi->g.outb_sest_entry.flags_and_did = htonl(OUTB_SEST_VED | ni->d_id);
- fi->g.outb_sest_entry.max_frame_len = htons(ni->mtu << 4);
- fi->g.outb_sest_entry.cntl = htons(ODB_CLASS_3 | ODB_EE_CREDIT | ODB_NO_INT | ODB_NO_COMP);
- fi->g.outb_sest_entry.total_seq_length = INV_SEQ_LEN;
- fi->g.outb_sest_entry.link = htons(OUTB_SEST_LINK);
- fi->g.outb_sest_entry.transaction_id = htonl(fi->g.scsi_oxid);
- fi->g.outb_sest_entry.seq_id = fi->g.seq_id;
- fi->g.outb_sest_entry.reserved = 0x0;
- fi->g.outb_sest_entry.header_length = htons(TACHYON_HEADER_LEN);
-
- {
- u_char df_ctl = 0;
- u_short rx_id = RX_ID_FIRST_SEQUENCE;
- u_int r_ctl = FC4_DEVICE_DATA | SOLICITED_DATA;
- u_int type = TYPE_FCP | SEQUENCE_INITIATIVE;
- /* Multi Frame Sequence ? If yes, set RO bit.
- */
- if (Cmnd->request_bufflen > ni->mtu)
- type |= RELATIVE_OFF_PRESENT;
- build_tachyon_header(fi, fi->g.my_id, r_ctl, ni->d_id, type, fi->g.seq_id, df_ctl, fi->g.scsi_oxid, rx_id, NULL);
- if (get_free_header(fi) || get_free_EDB(fi))
- return 1;
- memcpy(fi->q.ptr_tachyon_header[fi->q.tachyon_header_indx], &(fi->g.tach_header), TACHYON_HEADER_LEN);
- fi->g.outb_sest_entry.header_address = htonl(virt_to_bus(fi->q.ptr_tachyon_header[fi->q.tachyon_header_indx]));
- update_tachyon_header_indx(fi);
- }
-
- if (Cmnd->use_sg) {
- no_of_sg = Cmnd->use_sg;
- sl1 = sl2 = (struct scatterlist *)Cmnd->request_buffer;
- for (i = 0; i < no_of_sg; i++) {
- no_of_edb_buffers += sl1->length / SEST_BUFFER_SIZE;
- if (sl1->length % SEST_BUFFER_SIZE)
- no_of_edb_buffers++;
- sl1++;
- }
- }
- else {
- no_of_edb_buffers += Cmnd->request_bufflen / SEST_BUFFER_SIZE;
- if (Cmnd->request_bufflen % SEST_BUFFER_SIZE)
- no_of_edb_buffers++;
- } /* if !use_sg */
-
-
- /* We need "no_of_edb_buffers" _contiguous_ EDBs
- * that are FREE. Check for that first.
- */
- for (i = 0; i < no_of_edb_buffers; i++) {
- int j;
- if ((fi->q.edb_buffer_indx + no_of_edb_buffers) >= EDB_LEN)
- fi->q.edb_buffer_indx = 0;
- if (fi->q.free_edb_list[fi->q.edb_buffer_indx + i] != EDB_FREE) {
- for (j = 0; j < i; j++)
- update_EDB_indx(fi);
- if (get_free_EDB(fi))
- return 1;
- i = 0;
- }
- }
-
- /* We got enuff FREE EDBs.
- */
- if (Cmnd->use_sg) {
- fi->g.outb_sest_entry.edb_address = htonl(virt_to_bus(fi->q.ptr_edb[fi->q.edb_buffer_indx]));
- sl1 = (struct scatterlist *)Cmnd->request_buffer;
- for(i = 0; i < no_of_sg; i++) {
- int count = 0, j;
- count = sl1->length / SEST_BUFFER_SIZE;
- for (j = 0; j < count; j++) {
- build_EDB(fi, (char *)sl1->address, 0, SEST_BUFFER_SIZE);
- memcpy(fi->q.ptr_edb[fi->q.edb_buffer_indx], &(fi->g.edb), sizeof(EDB));
- /* Mark this EDB as being in use */
- fi->q.free_edb_list[fi->q.edb_buffer_indx] = EDB_BUSY;
- /* We have already made sure that we have enuff
- * free EDBs that are contiguous. So this is
- * safe.
- */
- update_EDB_indx(fi);
- sl1->address += SEST_BUFFER_SIZE;
- }
- /* Just in case itz not a multiple of
- * SEST_BUFFER_SIZE bytes.
- */
- if (sl1->length % SEST_BUFFER_SIZE) {
- build_EDB(fi, (char *)sl1->address, 0, sl1->length % SEST_BUFFER_SIZE);
- memcpy(fi->q.ptr_edb[fi->q.edb_buffer_indx], &(fi->g.edb), sizeof(EDB));
- fi->q.free_edb_list[fi->q.edb_buffer_indx] = EDB_BUSY;
- update_EDB_indx(fi);
- }
- sl1++;
- }
- /* The last EDB is special. It needs the "end bit" to
- * be set.
- */
- *(fi->q.ptr_edb[fi->q.edb_buffer_indx - 1] + 1) = *(fi->q.ptr_edb[fi->q.edb_buffer_indx - 1] + 1) | ntohs(EDB_END);
- }
- else {
- int count = 0, j;
- fi->g.outb_sest_entry.edb_address = htonl(virt_to_bus(fi->q.ptr_edb[fi->q.edb_buffer_indx]));
- count = Cmnd->request_bufflen / SEST_BUFFER_SIZE;
- for (j = 0; j < count; j++) {
- build_EDB(fi, (char *)req_buffer, 0, SEST_BUFFER_SIZE);
- memcpy(fi->q.ptr_edb[fi->q.edb_buffer_indx], &(fi->g.edb), sizeof(EDB));
- /* Mark this EDB as being in use */
- fi->q.free_edb_list[fi->q.edb_buffer_indx] = EDB_BUSY;
- /* We have already made sure that we have enuff
- * free EDBs that are contiguous. So this is
- * safe.
- */
- update_EDB_indx(fi);
- req_buffer += SEST_BUFFER_SIZE;
- }
- /* Just in case itz not a multiple of
- * SEST_BUFFER_SIZE bytes.
- */
- if (Cmnd->request_bufflen % SEST_BUFFER_SIZE) {
- build_EDB(fi, (char *)req_buffer, EDB_END, Cmnd->request_bufflen % SEST_BUFFER_SIZE);
- memcpy(fi->q.ptr_edb[fi->q.edb_buffer_indx], &(fi->g.edb), sizeof(EDB));
- fi->q.free_edb_list[fi->q.edb_buffer_indx] = EDB_BUSY;
- update_EDB_indx(fi);
- }
- else {
- /* Mark the last EDB as the "end edb".
- */
- *(fi->q.ptr_edb[fi->q.edb_buffer_indx - 1] + 1) = *(fi->q.ptr_edb[fi->q.edb_buffer_indx - 1] + 1) | htons(EDB_END);
- }
- }
-
- /* Finally we have something to send!.
- */
- memcpy(fi->q.ptr_sest[fi->g.scsi_oxid], &fi->g.outb_sest_entry, sizeof(OUTB_SEST_ENTRY));
- break;
- }
- return 0;
-}
-
-static void update_FCP_CMND_indx(struct fc_info *fi)
-{
- fi->q.fcp_cmnd_indx++;
- if (fi->q.fcp_cmnd_indx == NO_OF_FCP_CMNDS)
- fi->q.fcp_cmnd_indx = 0;
-}
-
-static int get_scsi_oxid(struct fc_info *fi)
-{
-u_short initial_oxid = fi->g.scsi_oxid;
- /* Check if the OX_ID is in use.
- * We could have an outstanding SCSI command.
- */
- while (fi->q.free_scsi_oxid[fi->g.scsi_oxid] != OXID_AVAILABLE) {
- update_scsi_oxid(fi);
- if (fi->g.scsi_oxid == initial_oxid) {
- T_MSG("No free OX_IDs avaliable")
- reset_tachyon(fi, SOFTWARE_RESET);
- return 1;
- }
- }
- return 0;
-}
-
-static void update_scsi_oxid(struct fc_info *fi)
-{
- fi->g.scsi_oxid++;
- if (fi->g.scsi_oxid == (MAX_SCSI_XID + 1))
- fi->g.scsi_oxid = 0;
-}
-
-static int get_free_SDB(struct fc_info *fi)
-{
-unsigned int initial_indx = fi->q.sdb_indx;
- /* Check if the SDB is in use.
- * We could have an outstanding SCSI Read command.
- * We should find a free slot as we can queue a
- * maximum of 32 SCSI commands only.
- */
- while (fi->q.sdb_slot_status[fi->q.sdb_indx] != SDB_FREE) {
- update_SDB_indx(fi);
- if (fi->q.sdb_indx == initial_indx) {
- T_MSG("No free SDB buffers avaliable")
- reset_tachyon(fi, SOFTWARE_RESET);
- return 1;
- }
- }
- return 0;
-}
-
-static void update_SDB_indx(struct fc_info *fi)
-{
- fi->q.sdb_indx++;
- if (fi->q.sdb_indx == NO_OF_SDB_ENTRIES)
- fi->q.sdb_indx = 0;
-}
-
-int iph5526_release(struct Scsi_Host *host)
-{
-struct iph5526_hostdata *hostdata = (struct iph5526_hostdata*)host->hostdata;
-struct fc_info *fi = hostdata->fi;
- free_irq(host->irq, host);
- iounmap(fi->g.mem_base);
- return 0;
-}
-
-const char *iph5526_info(struct Scsi_Host *host)
-{
-static char buf[80];
- sprintf(buf, "Interphase 5526 Fibre Channel PCI SCSI Adapter using IRQ %d\n", host->irq);
- return buf;
-}
-
-#define NAMELEN 8 /* # of chars for storing dev->name */
-
-static struct net_device *dev_fc[MAX_FC_CARDS];
-
-static int io;
-static int irq;
-static int bad; /* 0xbad = bad sig or no reset ack */
-static int scsi_registered;
-
-
-static int __init iph5526_init(void)
-{
- int i = 0;
-
- driver_template.module = THIS_MODULE;
- scsi_register_host(&driver_template);
- if (driver_template.present)
- scsi_registered = TRUE;
- else {
- printk("iph5526: SCSI registeration failed!!!\n");
- scsi_registered = FALSE;
- scsi_unregister_host(&driver_template);
- }
-
- while(fc[i] != NULL) {
- struct net_device *dev = alloc_fcdev(0);
- int err;
-
- if (!dev) {
- printk("iph5526.c: init_fcdev failed for card #%d\n", i+1);
- break;
- }
- dev->priv = fc[i];
- iph5526_probe_pci(dev);
- err = register_netdev(dev);
- if (err < 0) {
- free_netdev(dev);
- printk("iph5526.c: init_fcdev failed for card #%d\n", i+1);
- break;
- }
- dev_fc[i] = dev;
- i++;
- }
- if (i == 0)
- return -ENODEV;
-
- return 0;
-}
-
-static void __exit iph5526_exit(void)
-{
- int i = 0;
- while(fc[i] != NULL) {
- struct net_device *dev = fc[i]->dev;
- void *priv = dev->priv;
- fc[i]->g.dont_init = TRUE;
- take_tachyon_offline(fc[i]);
- unregister_netdev(dev);
- clean_up_memory(fc[i]);
- if (dev->priv)
- kfree(priv);
- free_netdev(dev);
- dev = NULL;
- i++;
- }
- if (scsi_registered == TRUE)
- scsi_unregister_host(&driver_template);
-}
-
-module_init(iph5526_init);
-module_exit(iph5526_exit);
-
-void clean_up_memory(struct fc_info *fi)
-{
-int i,j;
- ENTER("clean_up_memory");
- if (fi->q.ptr_mfsbq_base)
- free_pages((u_long)bus_to_virt(ntohl(*(fi->q.ptr_mfsbq_base))), 5);
- DPRINTK("after kfree2");
- for (i = 0; i < SFSBQ_LENGTH; i++)
- for (j = 0; j < NO_OF_ENTRIES; j++)
- if (fi->q.ptr_sfs_buffers[i*NO_OF_ENTRIES + j])
- kfree(fi->q.ptr_sfs_buffers[i*NO_OF_ENTRIES + j]);
- DPRINTK("after kfree1");
- if (fi->q.ptr_ocq_base)
- free_page((u_long)fi->q.ptr_ocq_base);
- if (fi->q.ptr_imq_base)
- free_page((u_long)fi->q.ptr_imq_base);
- if (fi->q.ptr_mfsbq_base)
- free_page((u_long)fi->q.ptr_mfsbq_base);
- if (fi->q.ptr_sfsbq_base)
- free_page((u_long)fi->q.ptr_sfsbq_base);
- if (fi->q.ptr_edb_base)
- free_pages((u_long)fi->q.ptr_edb_base, 5);
- if (fi->q.ptr_sest_base)
- free_pages((u_long)fi->q.ptr_sest_base, 5);
- if (fi->q.ptr_tachyon_header_base)
- free_page((u_long)fi->q.ptr_tachyon_header_base);
- if (fi->q.ptr_sdb_base)
- free_pages((u_long)fi->q.ptr_sdb_base, 5);
- if (fi->q.ptr_fcp_cmnd_base)
- free_page((u_long)fi->q.ptr_fcp_cmnd_base);
- DPRINTK("after free_pages");
- if (fi->q.ptr_host_ocq_cons_indx)
- kfree(fi->q.ptr_host_ocq_cons_indx);
- if (fi->q.ptr_host_hpcq_cons_indx)
- kfree(fi->q.ptr_host_hpcq_cons_indx);
- if (fi->q.ptr_host_imq_prod_indx)
- kfree(fi->q.ptr_host_imq_prod_indx);
- DPRINTK("after kfree3");
- while (fi->node_info_list) {
- struct fc_node_info *temp_list = fi->node_info_list;
- fi->node_info_list = fi->node_info_list->next;
- kfree(temp_list);
- }
- while (fi->ox_id_list) {
- struct ox_id_els_map *temp = fi->ox_id_list;
- fi->ox_id_list = fi->ox_id_list->next;
- kfree(temp);
- }
- LEAVE("clean_up_memory");
-}
-
-static int initialize_register_pointers(struct fc_info *fi)
-{
-ENTER("initialize_register_pointers");
-if(fi->g.tachyon_base == 0)
- return -ENOMEM;
-
-fi->i_r.ptr_ichip_hw_control_reg = ICHIP_HW_CONTROL_REG_OFF + fi->g.tachyon_base;
-fi->i_r.ptr_ichip_hw_status_reg = ICHIP_HW_STATUS_REG_OFF + fi->g.tachyon_base;
-fi->i_r.ptr_ichip_hw_addr_mask_reg = ICHIP_HW_ADDR_MASK_REG_OFF + fi->g.tachyon_base;
-fi->t_r.ptr_ocq_base_reg = OCQ_BASE_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_ocq_len_reg = OCQ_LENGTH_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_ocq_prod_indx_reg = OCQ_PRODUCER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_ocq_cons_indx_reg = OCQ_CONSUMER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_imq_base_reg = IMQ_BASE_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_imq_len_reg = IMQ_LENGTH_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_imq_cons_indx_reg = IMQ_CONSUMER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_imq_prod_indx_reg = IMQ_PRODUCER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_mfsbq_base_reg = MFSBQ_BASE_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_mfsbq_len_reg = MFSBQ_LENGTH_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_mfsbq_prod_reg = MFSBQ_PRODUCER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_mfsbq_cons_reg = MFSBQ_CONSUMER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_mfsbuff_len_reg = MFS_LENGTH_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_sfsbq_base_reg = SFSBQ_BASE_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_sfsbq_len_reg = SFSBQ_LENGTH_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_sfsbq_prod_reg = SFSBQ_PRODUCER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_sfsbq_cons_reg = SFSBQ_CONSUMER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_sfsbuff_len_reg = SFS_LENGTH_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_sest_base_reg = SEST_BASE_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_sest_len_reg = SEST_LENGTH_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_scsibuff_len_reg = SCSI_LENGTH_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_tach_config_reg = TACHYON_CONFIG_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_tach_control_reg = TACHYON_CONTROL_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_tach_status_reg = TACHYON_STATUS_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_tach_flush_oxid_reg = TACHYON_FLUSH_SEST_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_fm_config_reg = FMGR_CONFIG_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_fm_control_reg = FMGR_CONTROL_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_fm_status_reg = FMGR_STATUS_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_fm_tov_reg = FMGR_TIMER_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_fm_wwn_hi_reg = FMGR_WWN_HI_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_fm_wwn_low_reg = FMGR_WWN_LO_REGISTER_OFFSET + fi->g.tachyon_base;
-fi->t_r.ptr_fm_rx_al_pa_reg = FMGR_RCVD_ALPA_REGISTER_OFFSET + fi->g.tachyon_base;
-
-LEAVE("initialize_register_pointers");
-return 1;
-}
-
-
-
-/*
- * Local variables:
- * compile-command: "gcc -DKERNEL -Wall -O6 -fomit-frame-pointer -I/usr/src/linux/net/tcp -c iph5526.c"
- * version-control: t
- * kept-new-versions: 5
- * End:
- */
diff -L drivers/net/fc/iph5526_ip.h -puN drivers/net/fc/iph5526_ip.h~kill-iphase5526 /dev/null
--- 25/drivers/net/fc/iph5526_ip.h
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,24 +0,0 @@
-#ifndef IPH5526_IP_H
-#define IPH5526_IP_H
-
-#define LLC_SNAP_LEN 0x8
-
-/* Offsets into the ARP frame */
-#define ARP_OPCODE_0 (0x6 + LLC_SNAP_LEN)
-#define ARP_OPCODE_1 (0x7 + LLC_SNAP_LEN)
-
-int iph5526_probe(struct net_device *dev);
-static int fcdev_init(struct net_device *dev);
-static int iph5526_open(struct net_device *dev);
-static int iph5526_close(struct net_device *dev);
-static int iph5526_send_packet(struct sk_buff *skb, struct net_device *dev);
-static struct net_device_stats * iph5526_get_stats(struct net_device *dev);
-static int iph5526_change_mtu(struct net_device *dev, int mtu);
-
-
-static void rx_net_packet(struct fc_info *fi, u_char *buff_addr, int payload_size);
-static void rx_net_mfs_packet(struct fc_info *fi, struct sk_buff *skb);
-static int tx_ip_packet(struct sk_buff *skb, unsigned long len, struct fc_info *fi);
-static int tx_arp_packet(char *data, unsigned long len, struct fc_info *fi);
-#endif
-
diff -L drivers/net/fc/iph5526_novram.c -puN drivers/net/fc/iph5526_novram.c~kill-iphase5526 /dev/null
--- 25/drivers/net/fc/iph5526_novram.c
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,278 +0,0 @@
-/**********************************************************************
- * Reading the NVRAM on the Interphase 5526 PCI Fibre Channel Card.
- * All contents in this file : courtesy Interphase Corporation.
- * Special thanks to Kevin Quick, kquick@iphase.com.
- **********************************************************************/
-
-#define FF_MAGIC 0x4646
-#define DB_MAGIC 0x4442
-#define DL_MAGIC 0x444d
-
-
-#define CMD_LEN 9
-
-/***********
- *
- * Switches and defines for header files.
- *
- * The following defines are used to turn on and off
- * various options in the header files. Primarily useful
- * for debugging.
- *
- ***********/
-
-static const unsigned short novram_default[4] = {
- FF_MAGIC,
- DB_MAGIC,
- DL_MAGIC,
- 0 };
-
-
-/*
- * a list of the commands that can be sent to the NOVRAM
- */
-
-#define NR_EXTEND 0x100
-#define NR_WRITE 0x140
-#define NR_READ 0x180
-#define NR_ERASE 0x1c0
-
-#define EWDS 0x00
-#define WRAL 0x10
-#define ERAL 0x20
-#define EWEN 0x30
-
-/*
- * Defines for the pins on the NOVRAM
- */
-
-#define BIT(x) (1 << (x))
-
-#define NVDI_B 31
-#define NVDI BIT(NVDI_B)
-#define NVDO BIT(9)
-#define NVCE BIT(30)
-#define NVSK BIT(29)
-#define NV_MANUAL BIT(28)
-
-/***********
- *
- * Include files.
- *
- ***********/
-
-#define KeStallExecutionProcessor(x) {volatile int d, p;\
- for (d=0; d<x; d++) for (p=0; p<10; p++);\
- }
-
-
-/***********************
- *
- * This define ands the value and the current config register and puts
- * the result in the config register
- *
- ***********************/
-
-#define CFG_AND(val) { volatile int t; \
- t = readl(fi->n_r.ptr_novram_hw_control_reg); \
- t &= (val); \
- writel(t, fi->n_r.ptr_novram_hw_control_reg); \
- }
-
-/***********************
- *
- * This define ors the value and the current config register and puts
- * the result in the config register
- *
- ***********************/
-
-#define CFG_OR(val) { volatile int t; \
- t = readl(fi->n_r.ptr_novram_hw_control_reg); \
- t |= (val); \
- writel(t, fi->n_r.ptr_novram_hw_control_reg); \
- }
-
-/***********************
- *
- * Send a command to the NOVRAM, the command is in cmd.
- *
- * clear CE and SK. Then assert CE.
- * Clock each of the command bits out in the correct order with SK
- * exit with CE still asserted
- *
- ***********************/
-
-#define NVRAM_CMD(cmd) { int i; \
- int c = cmd; \
- CFG_AND(~(NVCE|NVSK)); \
- CFG_OR(NVCE); \
- for (i=0; i<CMD_LEN; i++) { \
- NVRAM_CLKOUT((c & (1 << (CMD_LEN - 1))) ? 1 : 0);\
- c <<= 1; } }
-
-/***********************
- *
- * clear the CE, this must be used after each command is complete
- *
- ***********************/
-
-#define NVRAM_CLR_CE CFG_AND(~NVCE)
-
-/***********************
- *
- * clock the data bit in bitval out to the NOVRAM. The bitval must be
- * a 1 or 0, or the clockout operation is undefined
- *
- ***********************/
-
-#define NVRAM_CLKOUT(bitval) {\
- CFG_AND(~NVDI); \
- CFG_OR((bitval) << NVDI_B); \
- KeStallExecutionProcessor(5);\
- CFG_OR(NVSK); \
- KeStallExecutionProcessor(5);\
- CFG_AND( ~NVSK); \
- }
-
-/***********************
- *
- * clock the data bit in and return a 1 or 0, depending on the value
- * that was received from the NOVRAM
- *
- ***********************/
-
-#define NVRAM_CLKIN(val) {\
- CFG_OR(NVSK); \
- KeStallExecutionProcessor(5);\
- CFG_AND(~NVSK); \
- KeStallExecutionProcessor(5);\
- val = (readl(fi->n_r.ptr_novram_hw_status_reg) & NVDO) ? 1 : 0; \
- }
-
-/***********
- *
- * Function Prototypes
- *
- ***********/
-
-static int iph5526_nr_get(struct fc_info *fi, int addr);
-static void iph5526_nr_do_init(struct fc_info *fi);
-static void iph5526_nr_checksum(struct fc_info *fi);
-
-
-/*******************************************************************
- *
- * Local routine: iph5526_nr_do_init
- * Purpose: initialize novram server
- * Description:
- *
- * iph5526_nr_do_init reads the novram into the temporary holding place.
- * A checksum is done on the area and the Magic Cookies are checked.
- * If any of them are bad, the NOVRAM is initialized with the
- * default values and a warning message is displayed.
- *
- *******************************************************************/
-
-static void iph5526_nr_do_init(struct fc_info *fi)
-{
- int i;
- unsigned short chksum = 0;
- int bad = 0;
-
- for (i=0; i<IPH5526_NOVRAM_SIZE; i++) {
- fi->n_r.data[i] = iph5526_nr_get(fi, i);
- chksum += fi->n_r.data[i];
- }
-
- if (chksum)
- bad = 1;
-
- if (fi->n_r.data[IPH5526_NOVRAM_SIZE - 4] != FF_MAGIC)
- bad = 1;
- if (fi->n_r.data[IPH5526_NOVRAM_SIZE - 3] != DB_MAGIC)
- bad = 1;
- if (fi->n_r.data[IPH5526_NOVRAM_SIZE - 2] != DL_MAGIC)
- bad = 1;
-
- if (bad) {
- for (i=0; i<IPH5526_NOVRAM_SIZE; i++) {
- if (i < (IPH5526_NOVRAM_SIZE - 4)) {
- fi->n_r.data[i] = 0xffff;
- } else {
- fi->n_r.data[i] = novram_default[i - (IPH5526_NOVRAM_SIZE - 4)];
- }
- }
- iph5526_nr_checksum(fi);
- }
-}
-
-
-/*******************************************************************
- *
- * Local routine: iph5526_nr_get
- * Purpose: read a single word of NOVRAM
- * Description:
- *
- * read the 16 bits that make up a word addr of the novram.
- * The 16 bits of data that are read are returned as the return value
- *
- *******************************************************************/
-
-static int iph5526_nr_get(struct fc_info *fi, int addr)
-{
- int i;
- int t;
- int val = 0;
-
- CFG_OR(NV_MANUAL);
-
- /*
- * read the first bit that was clocked with the falling edge of the
- * the last command data clock
- */
-
- NVRAM_CMD(NR_READ + addr);
-
- /*
- * Now read the rest of the bits, the next bit read is D1, then D2,
- * and so on
- */
-
- val = 0;
- for (i=0; i<16; i++) {
- NVRAM_CLKIN(t);
- val <<= 1;
- val |= t;
- }
- NVRAM_CLR_CE;
-
- CFG_OR(NVDI);
- CFG_AND(~NV_MANUAL);
-
- return(val);
-}
-
-
-
-
-/*******************************************************************
- *
- * Local routine: iph5526_nr_checksum
- * Purpose: calculate novram checksum on fi->n_r.data
- * Description:
- *
- * calculate a checksum for the novram on the image that is
- * currently in fi->n_r.data
- *
- *******************************************************************/
-
-static void iph5526_nr_checksum(struct fc_info *fi)
-{
- int i;
- unsigned short chksum = 0;
-
- for (i=0; i<(IPH5526_NOVRAM_SIZE - 1); i++)
- chksum += fi->n_r.data[i];
-
- fi->n_r.data[i] = -chksum;
-}
diff -L drivers/net/fc/iph5526_scsi.h -puN drivers/net/fc/iph5526_scsi.h~kill-iphase5526 /dev/null
--- 25/drivers/net/fc/iph5526_scsi.h
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,31 +0,0 @@
-#ifndef IPH5526_SCSI_H
-#define IPH5526_SCSI_H
-
-#define IPH5526_CAN_QUEUE 32
-#define IPH5526_SCSI_FC { \
- .name = "Interphase 5526 Fibre Channel SCSI Adapter", \
- .detect = iph5526_detect, \
- .release = iph5526_release, \
- .info = iph5526_info, \
- .queuecommand = iph5526_queuecommand, \
- .bios_param = iph5526_biosparam, \
- .can_queue = IPH5526_CAN_QUEUE, \
- .this_id = -1, \
- .sg_tablesize = 255, \
- .cmd_per_lun = 8, \
- .use_clustering = DISABLE_CLUSTERING, \
- .eh_abort_handler = iph5526_abort, \
- .eh_device_reset_handler = NULL, \
- .eh_bus_reset_handler = NULL, \
- .eh_host_reset_handler = NULL, \
-}
-
-int iph5526_detect(Scsi_Host_Template *tmpt);
-int iph5526_queuecommand(Scsi_Cmnd *Cmnd, void (*done) (Scsi_Cmnd *));
-int iph5526_release(struct Scsi_Host *host);
-int iph5526_abort(Scsi_Cmnd *Cmnd);
-const char *iph5526_info(struct Scsi_Host *host);
-int iph5526_biosparam(struct Scsi_Disk * disk, struct block_device *n, int ip[]);
-
-#endif
-
diff -L drivers/net/fc/Makefile -puN drivers/net/fc/Makefile~kill-iphase5526 /dev/null
--- 25/drivers/net/fc/Makefile
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,8 +0,0 @@
-#
-# Makefile for linux/drivers/net/fc
-#
-# 9 Aug 2000, Christoph Hellwig <hch@infradead.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-$(CONFIG_IPHASE5526) += iph5526.o
diff -L drivers/net/fc/tach.h -puN drivers/net/fc/tach.h~kill-iphase5526 /dev/null
--- 25/drivers/net/fc/tach.h
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,475 +0,0 @@
-/**********************************************************************
- * Defines for the Tachyon Fibre Channel Controller and the Interphase
- * (i)chip TPI.
- *********************************************************************/
-
-#ifndef _TACH_H
-#define _TACH_H
-
-#define MY_PAGE_SIZE 4096
-#define REPLICATE 0xFF
-#define MAX_NODES 127
-#define BROADCAST 0xFFFFFF
-#define BROADCAST_ADDR 0xFFFFFFFFFFFF
-#define LOGIN_COMPLETED 2
-#define LOGIN_ATTEMPTED 1
-#define LOGIN_NOT_ATTEMPTED 0
-#define TRUE 1
-#define FALSE 0
-
-#define TACHYON_LIMIT 0x01EF
-#define TACHYON_OFFSET 0x200
-
-/* Offsets to the (i) chip */
-#define ICHIP_HW_CONTROL_REG_OFF (0x080 - TACHYON_OFFSET)
-#define ICHIP_HW_STATUS_REG_OFF (0x084 - TACHYON_OFFSET)
-#define ICHIP_HW_ADDR_MASK_REG_OFF (0x090 - TACHYON_OFFSET)
-
-/* (i)chip Hardware Control Register defines */
-#define ICHIP_HCR_RESET 0x01
-#define ICHIP_HCR_DERESET 0x0
-#define ICHIP_HCR_ENABLE_INTA 0x0000003E
-#define ICHIP_HCR_ENABLE_INTB 0x003E0000
-#define ICHIP_HCR_IWDATA_FIFO 0x800000
-
-/* (i)chip Hardware Status Register defines */
-#define ICHIP_HSR_INT_LATCH 0x02
-
-/* (i)chip Hardware Address Mask Register defines */
-#define ICHIP_HAMR_BYTE_SWAP_ADDR_TR 0x08
-#define ICHIP_HAMR_BYTE_SWAP_NO_ADDR_TR 0x04
-
-/* NOVRAM defines */
-#define IPH5526_NOVRAM_SIZE 64
-
-
-/* Offsets for the registers that correspond to the
- * Qs on the Tachyon (As defined in the Tachyon Manual).
- */
-
-/* Outbound Command Queue (OCQ).
- */
-#define OCQ_BASE_REGISTER_OFFSET 0x000
-#define OCQ_LENGTH_REGISTER_OFFSET 0x004
-#define OCQ_PRODUCER_REGISTER_OFFSET 0x008
-#define OCQ_CONSUMER_REGISTER_OFFSET 0x00C
-
-/* Inbound Message Queue (IMQ).
- */
-#define IMQ_BASE_REGISTER_OFFSET 0x080
-#define IMQ_LENGTH_REGISTER_OFFSET 0x084
-#define IMQ_CONSUMER_REGISTER_OFFSET 0x088
-#define IMQ_PRODUCER_REGISTER_OFFSET 0x08C
-
-/* Multiframe Sequence Buffer Queue (MFSBQ)
- */
-#define MFSBQ_BASE_REGISTER_OFFSET 0x0C0
-#define MFSBQ_LENGTH_REGISTER_OFFSET 0x0C4
-#define MFSBQ_PRODUCER_REGISTER_OFFSET 0x0C8
-#define MFSBQ_CONSUMER_REGISTER_OFFSET 0x0CC
-#define MFS_LENGTH_REGISTER_OFFSET 0x0D0
-
-/* Single Frame Sequence Buffer Queue (SFSBQ)
- */
-#define SFSBQ_BASE_REGISTER_OFFSET 0x100
-#define SFSBQ_LENGTH_REGISTER_OFFSET 0x104
-#define SFSBQ_PRODUCER_REGISTER_OFFSET 0x108
-#define SFSBQ_CONSUMER_REGISTER_OFFSET 0x10C
-#define SFS_LENGTH_REGISTER_OFFSET 0x110
-
-/* SCSI Exchange State Table (SEST)
- */
-#define SEST_BASE_REGISTER_OFFSET 0x140
-#define SEST_LENGTH_REGISTER_OFFSET 0x144
-#define SCSI_LENGTH_REGISTER_OFFSET 0x148
-
-/* Length of the various Qs
- */
-#define NO_OF_ENTRIES 8
-#define OCQ_LENGTH (MY_PAGE_SIZE/32)
-#define IMQ_LENGTH (MY_PAGE_SIZE/32)
-#define MFSBQ_LENGTH 8
-#define SFSBQ_LENGTH 8
-#define SEST_LENGTH MY_PAGE_SIZE
-
-/* Size of the various buffers.
- */
-#define TACH_FRAME_SIZE 2048
-#define MFS_BUFFER_SIZE TACH_FRAME_SIZE
-#define SFS_BUFFER_SIZE (TACH_FRAME_SIZE + TACHYON_HEADER_LEN)
-#define SEST_BUFFER_SIZE 512
-#define TACH_HEADER_SIZE 64
-#define NO_OF_TACH_HEADERS ((MY_PAGE_SIZE)/TACH_HEADER_SIZE)
-
-#define NO_OF_FCP_CMNDS (MY_PAGE_SIZE/32)
-#define SDB_SIZE 2048
-#define NO_OF_SDB_ENTRIES ((32*MY_PAGE_SIZE)/SDB_SIZE)
-
-
-/* Offsets to the other Tachyon registers.
- * (As defined in the Tachyon manual)
- */
-#define TACHYON_CONFIG_REGISTER_OFFSET 0x184
-#define TACHYON_CONTROL_REGISTER_OFFSET 0x188
-#define TACHYON_STATUS_REGISTER_OFFSET 0x18C
-#define TACHYON_FLUSH_SEST_REGISTER_OFFSET 0x190
-
-/* Defines for the Tachyon Configuration register.
- */
-#define SCSI_ENABLE 0x40000000
-#define WRITE_STREAM_SIZE 0x800 /* size = 16 */
-#define READ_STREAM_SIZE 0x300 /* size = 64 */
-#define PARITY_EVEN 0x2
-#define OOO_REASSEMBLY_DISABLE 0x40
-
-/* Defines for the Tachyon Control register.
- */
-#define SOFTWARE_RESET 0x80000000
-#define OCQ_RESET 0x4
-#define ERROR_RELEASE 0x2
-
-/* Defines for the Tachyon Status register.
- */
-#define RECEIVE_FIFO_EMPTY 0x10
-#define OSM_FROZEN 0x1
-#define OCQ_RESET_STATUS 0x20
-#define SCSI_FREEZE_STATUS 0x40
-
-
-/* Offsets to the Frame Manager registers.
- */
-#define FMGR_CONFIG_REGISTER_OFFSET 0x1C0
-#define FMGR_CONTROL_REGISTER_OFFSET 0x1C4
-#define FMGR_STATUS_REGISTER_OFFSET 0x1C8
-#define FMGR_TIMER_REGISTER_OFFSET 0x1CC
-#define FMGR_WWN_HI_REGISTER_OFFSET 0x1E0
-#define FMGR_WWN_LO_REGISTER_OFFSET 0x1E4
-#define FMGR_RCVD_ALPA_REGISTER_OFFSET 0x1E8
-
-/* Defines for the Frame Manager Configuration register.
- */
-#define BB_CREDIT 0x10000
-#define NPORT 0x8000
-#define LOOP_INIT_FABRIC_ADDRESS 0x400
-#define LOOP_INIT_PREVIOUS_ADDRESS 0x200
-#define LOOP_INIT_SOFT_ADDRESS 0x80
-
-/* Defines for the Frame Manager Control register.
- */
-#define HOST_CONTROL 0x02
-#define EXIT_HOST_CONTROL 0x03
-#define OFFLINE 0x05
-#define INITIALIZE 0x06
-#define CLEAR_LF 0x07
-
-/* Defines for the Frame Manager Status register.
- */
-#define LOOP_UP 0x80000000
-#define TRANSMIT_PARITY_ERROR 0x40000000
-#define NON_PARTICIPATING 0x20000000
-#define OUT_OF_SYNC 0x02000000
-#define LOSS_OF_SIGNAL 0x01000000
-#define NOS_OLS_RECEIVED 0x00080000
-#define LOOP_STATE_TIMEOUT 0x00040000
-#define LIPF_RECEIVED 0x00020000
-#define BAD_ALPA 0x00010000
-#define LINK_FAILURE 0x00001000
-#define ELASTIC_STORE_ERROR 0x00000400
-#define LINK_UP 0x00000200
-#define LINK_DOWN 0x00000100
-#define ARBITRATING 0x00000010
-#define ARB_WON 0x00000020
-#define OPEN 0x00000030
-#define OPENED 0x00000040
-#define TX_CLS 0x00000050
-#define RX_CLS 0x00000060
-#define TRANSFER 0x00000070
-#define INITIALIZING 0x00000080
-#define LOOP_FAIL 0x000000D0
-#define OLD_PORT 0x000000F0
-#define PORT_STATE_ACTIVE 0x0000000F
-#define PORT_STATE_OFFLINE 0x00000000
-#define PORT_STATE_LF1 0x00000009
-#define PORT_STATE_LF2 0x0000000A
-
-/* Completion Message Types
- * (defined in P.177 of the Tachyon manual)
- */
-#define OUTBOUND_COMPLETION 0x000
-#define OUTBOUND_COMPLETION_I 0x100
-#define OUT_HI_PRI_COMPLETION 0x001
-#define OUT_HI_PRI_COMPLETION_I 0x101
-#define INBOUND_MFS_COMPLETION 0x102
-#define INBOUND_OOO_COMPLETION 0x003
-#define INBOUND_SFS_COMPLETION 0x104
-#define INBOUND_C1_TIMEOUT 0x105
-#define INBOUND_UNKNOWN_FRAME_I 0x106
-#define INBOUND_BUSIED_FRAME 0x006
-#define SFS_BUF_WARN 0x107
-#define MFS_BUF_WARN 0x108
-#define IMQ_BUF_WARN 0x109
-#define FRAME_MGR_INTERRUPT 0x10A
-#define READ_STATUS 0x10B
-#define INBOUND_SCSI_DATA_COMPLETION 0x10C
-#define INBOUND_SCSI_COMMAND 0x10D
-#define BAD_SCSI_FRAME 0x10E
-#define INB_SCSI_STATUS_COMPLETION 0x10F
-
-/* One of the things that we care about when we receive an
- * Outbound Completion Message (OCM).
- */
-#define OCM_TIMEOUT_OR_BAD_ALPA 0x0800
-
-/* Defines for the Tachyon Header structure.
- */
-#define SOFI3 0x70
-#define SOFN3 0xB0
-#define EOFN 0x5
-
-/* R_CTL */
-#define FC4_DEVICE_DATA 0
-#define EXTENDED_LINK_DATA 0x20000000
-#define FC4_LINK_DATA 0x30000000
-#define BASIC_LINK_DATA 0x80000000
-#define LINK_CONTROL 0xC0000000
-#define SOLICITED_DATA 0x1000000
-#define UNSOLICITED_CONTROL 0x2000000
-#define SOLICITED_CONTROL 0x3000000
-#define UNSOLICITED_DATA 0x4000000
-#define DATA_DESCRIPTOR 0x5000000
-#define UNSOLICITED_COMMAND 0x6000000
-
-#define RCTL_ELS_UCTL 0x22000000
-#define RCTL_ELS_SCTL 0x23000000
-#define RCTL_BASIC_ABTS 0x81000000
-#define RCTL_BASIC_ACC 0x84000000
-#define RCTL_BASIC_RJT 0x85000000
-
-/* TYPE */
-#define TYPE_BLS 0x00000000
-#define TYPE_ELS 0x01000000
-#define TYPE_FC_SERVICES 0x20000000
-#define TYPE_LLC_SNAP 0x05000000
-#define TYPE_FCP 0x08000000
-
-/* F_CTL */
-#define EXCHANGE_RESPONDER 0x800000
-#define SEQUENCE_RESPONDER 0x400000
-#define FIRST_SEQUENCE 0x200000
-#define LAST_SEQUENCE 0x100000
-#define SEQUENCE_INITIATIVE 0x10000
-#define RELATIVE_OFF_PRESENT 0x8
-#define END_SEQUENCE 0x80000
-
-#define TACHYON_HEADER_LEN 32
-#define NW_HEADER_LEN 16
-/* Defines for the Outbound Descriptor Block (ODB).
- */
-#define ODB_CLASS_3 0xC000
-#define ODB_NO_COMP 0x400
-#define ODB_NO_INT 0x200
-#define ODB_EE_CREDIT 0xF
-
-/* Defines for the Extended Descriptor Block (EDB).
- */
-#define EDB_LEN ((32*MY_PAGE_SIZE)/8)
-#define EDB_END 0x8000
-#define EDB_FREE 0
-#define EDB_BUSY 1
-
-/* Command Codes */
-#define ELS_LS_RJT 0x01000000
-#define ELS_ACC 0x02000000
-#define ELS_PLOGI 0x03000000
-#define ELS_FLOGI 0x04000000
-#define ELS_LOGO 0x05000000
-#define ELS_TPRLO 0x24000000
-#define ELS_ADISC 0x52000000
-#define ELS_PDISC 0x50000000
-#define ELS_PRLI 0x20000000
-#define ELS_PRLO 0x21000000
-#define ELS_SCR 0x62000000
-#define ELS_RSCN 0x61000000
-#define ELS_FARP_REQ 0x54000000
-#define ELS_ABTX 0x06000000
-#define ELS_ADVC 0x0D000000
-#define ELS_ECHO 0x10000000
-#define ELS_ESTC 0x0C000000
-#define ELS_ESTS 0x0B000000
-#define ELS_RCS 0x07000000
-#define ELS_RES 0x08000000
-#define ELS_RLS 0x0F000000
-#define ELS_RRQ 0x12000000
-#define ELS_RSS 0x09000000
-#define ELS_RTV 0x0E000000
-#define ELS_RSI 0x0A000000
-#define ELS_TEST 0x11000000
-#define ELS_RNC 0x53000000
-#define ELS_RVCS 0x41000000
-#define ELS_TPLS 0x23000000
-#define ELS_GAID 0x30000000
-#define ELS_FACT 0x31000000
-#define ELS_FAN 0x60000000
-#define ELS_FDACT 0x32000000
-#define ELS_NACT 0x33000000
-#define ELS_NDACT 0x34000000
-#define ELS_QoSR 0x40000000
-#define ELS_FDISC 0x51000000
-
-#define ELS_NS_PLOGI 0x03FFFFFC
-
-/* LS_RJT reason codes.
- */
-#define INV_LS_CMND_CODE 0x0001
-#define LOGICAL_ERR 0x0003
-#define LOGICAL_BUSY 0x0005
-#define PROTOCOL_ERR 0x0007
-#define UNABLE_TO_PERFORM 0x0009
-#define CMND_NOT_SUPP 0x000B
-
-/* LS_RJT explanation codes.
- */
-#define NO_EXPLN 0x0000
-#define RECV_FIELD_SIZE 0x0700
-#define CONC_SEQ 0x0900
-#define REQ_NOT_SUPPORTED 0x2C00
-#define INV_PAYLOAD_LEN 0x2D00
-
-/* Payload Length defines.
- */
-#define PLOGI_LEN 116
-
-#define CONCURRENT_SEQUENCES 0x01
-#define RO_INFO_CATEGORY 0xFE
-#define E_D_TOV 0x07D0 /* 2 Secs */
-#define AL_TIME 0x0010 /* ~15 msec */
-#define TOV_VALUES (AL_TIME << 16) | E_D_TOV
-#define RT_TOV 0x64 /* 100 msec */
-#define PTP_TOV_VALUES (RT_TOV << 16) | E_D_TOV
-#define SERVICE_VALID 0x8000
-#define SEQUENCE_DELIVERY 0x0800
-#define CLASS3_CONCURRENT_SEQUENCE 0x01
-#define CLASS3_OPEN_SEQUENCE 0x01
-
-/* These are retrieved from the NOVRAM.
- */
-#define WORLD_WIDE_NAME_LOW fi->g.my_port_name_low
-#define WORLD_WIDE_NAME_HIGH fi->g.my_port_name_high
-#define N_PORT_NAME_HIGH fi->g.my_port_name_high
-#define N_PORT_NAME_LOW fi->g.my_port_name_low
-#define NODE_NAME_HIGH fi->g.my_node_name_high
-#define NODE_NAME_LOW fi->g.my_node_name_low
-
-#define PORT_NAME_LEN 8
-#define NODE_NAME_LEN 8
-
-
-#define PH_VERSION 0x0909
-
-#define LOOP_BB_CREDIT 0x00
-#define PT2PT_BB_CREDIT 0x01
-#define FLOGI_C_F 0x0800 /* Alternate BB_Credit Mgmnt */
-#define PLOGI_C_F 0x8800 /* Continuously Increasing + Alternate BB_Credit Management */
-
-/* Fabric defines */
-#define DIRECTORY_SERVER 0xFFFFFC
-#define FABRIC_CONTROLLER 0xFFFFFD
-#define F_PORT 0xFFFFFE
-
-#define FLOGI_DID 0xFFFE
-#define NS_PLOGI_DID 0xFFFC
-
-/* Fibre Channel Services defines */
-#define FCS_RFC_4 0x02170000
-#define FCS_GP_ID4 0x01A10000
-#define FCS_ACC 0x8002
-#define FCS_REJECT 0x8001
-
-/* CT Header defines */
-#define FC_CT_REV 0x01000000
-#define DIRECTORY_SERVER_APP 0xFC
-#define NAME_SERVICE 0x02
-
-/* Port Type defines */
-#define PORT_TYPE_IP 0x05000000
-#define PORT_TYPE_NX_PORTS 0x7F000000
-
-/* SCR defines */
-#define FABRIC_DETECTED_REG 0x00000001
-#define N_PORT_DETECTED_REG 0x00000002
-#define FULL_REGISTRATION 0x00000003
-#define CLEAR_REGISTRATION 0x000000FF
-
-/* Command structure has only one byte to address targets
- */
-#define MAX_SCSI_TARGETS 0xFF
-
-#define FC_SCSI_READ 0x80
-#define FC_SCSI_WRITE 0x81
-#define FC_ELS 0x01
-#define FC_BLS 0x00
-#define FC_IP 0x05
-#define FC_BROADCAST 0xFF
-
-/* SEST defines.
- */
-#define SEST_V 0x80000000 /* V = 1 */
-#define INB_SEST_VED 0xA0000000 /* V = 1, D = 1 */
-#define SEST_INV 0x7FFFFFFF
-#define OUTB_SEST_VED 0x80000000 /* V = 1 */
-#define INV_SEQ_LEN 0xFFFFFFFF
-#define OUTB_SEST_LINK 0xFFFF
-
-/* PRLI defines.
- */
-#define PAGE_LEN 0x100000 /* 3rd byte - 0x10 */
-#define PRLI_LEN 0x0014 /* 20 bytes */
-#define FCP_TYPE_CODE 0x0800 /* FCP-SCSI */
-#define IMAGE_PAIR 0x2000 /* establish image pair */
-#define INITIATOR_FUNC 0x00000020
-#define TARGET_FUNC 0x00000010
-#define READ_XFER_RDY_DISABLED 0x00000002
-
-#define NODE_PROCESS_LOGGED_IN 0x3
-#define NODE_NOT_PRESENT 0x2
-#define NODE_LOGGED_IN 0x1
-#define NODE_LOGGED_OUT 0x0
-
-/* Defines to determine what should be returned when a SCSI frame
- * times out.
- */
-#define FC_SCSI_BAD_TARGET 0xFFFE0000
-
-/* RSCN Address formats */
-#define PORT_ADDRESS_FORMAT 0x00
-#define AREA_ADDRESS_FORMAT 0x01
-#define DOMAIN_ADDRESS_FORMAT 0x02
-
-/* Defines used to determine whether a frame transmission should
- * be indicated by an interrupt or not.
- */
-#define NO_COMP_AND_INT 0
-#define INT_AND_COMP_REQ 1
-#define NO_INT_COMP_REQ 2
-
-/* Other junk...
- */
-#define SDB_FREE 0
-#define SDB_BUSY 1
-#define MAX_PENDING_FRAMES 15
-#define RX_ID_FIRST_SEQUENCE 0xFFFF
-#define OX_ID_FIRST_SEQUENCE 0xFFFF
-#define NOT_SCSI_XID 0x8000
-#define MAX_SCSI_XID 0x0FFF /* X_IDs are from 0-4095 */
-#define SCSI_READ_BIT 0x4000
-#define MAX_SCSI_OXID 0x4FFF
-#define OXID_AVAILABLE 0
-#define OXID_INUSE 1
-#define MAX_SEQ_ID 0xFF
-
-#define INITIATOR 2
-#define TARGET 1
-#define DELETE_ENTRY 1
-#define ADD_ENTRY 2
-
-#endif /* _TACH_H */
diff -L drivers/net/fc/tach_structs.h -puN drivers/net/fc/tach_structs.h~kill-iphase5526 /dev/null
--- 25/drivers/net/fc/tach_structs.h
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,428 +0,0 @@
-/**********************************************************************
- * iph5526.c: Structures for the Interphase 5526 PCI Fibre Channel
- * IP/SCSI driver.
- * Copyright (C) 1999 Vineet M Abraham <vmabraham@hotmail.com>
- **********************************************************************/
-
-#ifndef _TACH_STRUCT_H
-#define _TACH_STRUCT_H
-
-typedef struct {
- u_short cmnd_code;
- u_short payload_length;
- u_short type_code;
- u_short est_image_pair;
- u_int originator_pa;
- u_int responder_pa;
- u_int service_params;
-} PRLI;
-
-typedef struct {
- u_int flags_and_byte_offset;
- u_int byte_count;
- u_short no_of_recvd_frames;
- u_short no_of_expected_frames;
- u_int last_fctl;
- u_int sdb_address;
- u_int scratch_pad;
- u_int expected_ro;
- u_short buffer_index;
- u_short buffer_offset;
- } INB_SEST_ENTRY;
-
-typedef struct {
- u_int flags_and_did;
- u_short max_frame_len;
- u_short cntl;
- u_int total_seq_length;
- u_short link;
- u_short rx_id;
- u_int transaction_id;
- u_int header_address;
- u_char seq_id;
- u_char reserved;
- u_short header_length;
- u_int edb_address;
- } OUTB_SEST_ENTRY;
-
-typedef struct {
- u_short d_naa;
- u_short dest_high;
- u_int dest_low;
- u_short s_naa;
- u_short source_high;
- u_int source_low;
- } NW_HEADER;
-
-typedef struct {
- u_int resv;
- u_char sof_and_eof;
- u_char dest_alpa;
- u_short lcr_and_time_stamp;
- u_int r_ctl_and_d_id;
- u_int vc_id_and_s_id;
- u_int type_and_f_cntl;
- u_char seq_id;
- u_char df_cntl;
- u_short seq_cnt;
- u_short ox_id;
- u_short rx_id;
- u_int ro;
- NW_HEADER nw_header;
- } TACHYON_HEADER;
-
-typedef struct {
- u_short service_options;
- u_short initiator_ctl;
- u_short recipient_ctl;
- u_short recv_data_field_size;
- u_short concurrent_sequences;
- u_short n_port_end_to_end_credit;
- u_short open_seq_per_exchange;
- u_short resv;
- }CLASS_OF_SERVICE;
-
-typedef struct {
- u_int logo_cmnd;
- u_char reserved;
- u_char n_port_id_2;
- u_char n_port_id_1;
- u_char n_port_id_0;
- u_int port_name_up;
- u_int port_name_low;
- } LOGO;
-
-typedef struct {
- u_int ls_cmnd_code;
- u_int hard_address;
- u_int port_name_high;
- u_int port_name_low;
- u_int node_name_high;
- u_int node_name_low;
- u_int n_port_id;
- } ADISC;
-
-typedef struct {
- u_int cmnd_code;
- u_int reason_code;
- } LS_RJT;
-
-typedef struct {
- u_int cmnd_code;
- } ACC;
-
-typedef struct {
- u_int seq_d_id;
- u_int tot_len;
- u_short cntl;
- u_short rx_id;
- u_short cs_enable;
- u_short cs_seed;
- u_int trans_id;
- u_int hdr_addr;
- u_short frame_len;
- u_short hdr_len;
- u_int edb_addr;
- }ODB;
-
-typedef struct {
- u_int cmnd_code;
- u_int reg_function; /* in the last byte */
- } SCR;
-
-typedef struct {
- u_int rev_in_id;
- u_char fs_type;
- u_char fs_subtype;
- u_char options;
- u_char resv1;
- u_short cmnd_resp_code;
- u_short max_res_size;
- u_char resv2;
- u_char reason_code;
- u_char expln_code;
- u_char vendor_unique;
- } CT_HDR;
-
-typedef struct {
- CT_HDR ct_hdr;
- u_int s_id;
- u_char bit_map[32]; /* 32 byte bit map */
- } RFC_4;
-
-typedef struct {
- u_int ls_cmnd_code;
- u_short fc_ph_version;
- u_short buff_to_buff_credit;
- u_short common_features;
- u_short recv_data_field_size;
- u_short n_port_total_conc_seq;
- u_short rel_off_by_info_cat;
- u_int ED_TOV;
- u_int n_port_name_high;
- u_int n_port_name_low;
- u_int node_name_high;
- u_int node_name_low;
- CLASS_OF_SERVICE c_of_s[3];
- u_int resv[4];
- u_int vendor_version_level[4];
- }LOGIN;
-
-typedef struct {
- CT_HDR ct_hdr;
- u_int port_type; /* in the first byte */
- } GP_ID4;
-
-typedef struct {
- u_int buf_addr;
- u_short ehf;
- u_short buf_len;
- }EDB;
-
-/* (i)chip Registers */
-struct i_chip_regs {
- u_int ptr_ichip_hw_control_reg;
- u_int ptr_ichip_hw_status_reg;
- u_int ptr_ichip_hw_addr_mask_reg;
-};
-
-struct iph5526_novram {
- u_int ptr_novram_hw_control_reg;
- u_int ptr_novram_hw_status_reg;
- u_short data[IPH5526_NOVRAM_SIZE];
-};
-
-/* Tachyon Registers */
-struct tachyon_regs {
- u_int ptr_ocq_base_reg;
- u_int ptr_ocq_len_reg;
- u_int ptr_ocq_prod_indx_reg;
- u_int ptr_ocq_cons_indx_reg;
-
- u_int ptr_imq_base_reg;
- u_int ptr_imq_len_reg;
- u_int ptr_imq_cons_indx_reg;
- u_int ptr_imq_prod_indx_reg;
-
- u_int ptr_mfsbq_base_reg;
- u_int ptr_mfsbq_len_reg;
- u_int ptr_mfsbq_prod_reg;
- u_int ptr_mfsbq_cons_reg;
- u_int ptr_mfsbuff_len_reg;
-
- u_int ptr_sfsbq_base_reg;
- u_int ptr_sfsbq_len_reg;
- u_int ptr_sfsbq_prod_reg;
- u_int ptr_sfsbq_cons_reg;
- u_int ptr_sfsbuff_len_reg;
-
- u_int ptr_sest_base_reg;
- u_int ptr_sest_len_reg;
- u_int ptr_scsibuff_len_reg;
-
- u_int ptr_tach_config_reg;
- u_int ptr_tach_control_reg;
- u_int ptr_tach_status_reg;
- u_int ptr_tach_flush_oxid_reg;
-
- u_int ptr_fm_config_reg;
- u_int ptr_fm_control_reg;
- u_int ptr_fm_status_reg;
- u_int ptr_fm_tov_reg;
- u_int ptr_fm_wwn_hi_reg;
- u_int ptr_fm_wwn_low_reg;
- u_int ptr_fm_rx_al_pa_reg;
-};
-
-struct globals {
- u_long tachyon_base;
- u_int *mem_base;
- u_short ox_id; /* OX_ID used for IP and ELS frames */
- u_short scsi_oxid; /* OX_ID for SEST entry */
- u_char seq_id;
- u_int my_id;
- u_int my_ddaa; /* my domain and area in a fabric */
- volatile u_char loop_up;
- volatile u_char ptp_up; /* we have a point-to-point link */
- volatile u_char link_up;
- volatile u_char n_port_try;
- volatile u_char nport_timer_set;
- volatile u_char lport_timer_set;
- /* Hmmm... We don't want to Initialize while closing */
- u_char dont_init;
- u_int my_node_name_high;
- u_int my_node_name_low;
- u_int my_port_name_high;
- u_int my_port_name_low;
- u_char fabric_present;
- u_char explore_fabric;
- u_char name_server;
- u_int my_mtu;
- u_int *els_buffer[MAX_PENDING_FRAMES]; /* temp space for ELS frames */
- char *arp_buffer; /* temp space for ARP frames */
- u_int mfs_buffer_count; /* keep track of MFS buffers used*/
- u_char scsi_registered;
- /* variables for port discovery */
- volatile u_char port_discovery;
- volatile u_char perform_adisc;
- u_short alpa_list_index;
- u_short type_of_frame; /* Could be IP/SCSI Read/SCSI Write*/
- u_char no_of_targets; /* used to assign target_ids */
- u_long sem; /* to synchronize between IP and SCSI */
- u_char e_i;
-
- /* the frames */
- TACHYON_HEADER tach_header;
- LOGIN login;
- PRLI prli;
- LOGO logo;
- ADISC adisc;
- LS_RJT ls_rjt;
- ODB odb;
- INB_SEST_ENTRY inb_sest_entry;
- OUTB_SEST_ENTRY outb_sest_entry;
- ACC acc;
- SCR scr;
- EDB edb;
- RFC_4 rfc_4;
- GP_ID4 gp_id4;
-};
-
-struct queue_variables {
- /* Indices maintained in host memory.
- */
- u_int *host_ocq_cons_indx, *host_hpcq_cons_indx, *host_imq_prod_indx;
- u_int *ptr_host_ocq_cons_indx, *ptr_host_hpcq_cons_indx, *ptr_host_imq_prod_indx;
-
- /* Variables for Outbound Command Queue (OCQ).
- */
- u_int *ptr_ocq_base;
- u_int ocq_len, ocq_end;
- u_int ocq_prod_indx;
- u_int *ptr_odb[OCQ_LENGTH];
-
- /* Variables for Inbound Message Queue (IMQ).
- */
- u_int *ptr_imq_base;
- u_int imq_len, imq_end;
- u_int imq_cons_indx;
- u_int imq_prod_indx;
- u_int *ptr_imqe[IMQ_LENGTH];
-
- u_int *ptr_mfsbq_base;
- u_int mfsbq_len, mfsbq_end;
- u_int mfsbq_prod_indx;
- u_int mfsbq_cons_indx;
- u_int mfsbuff_len, mfsbuff_end;
-
- u_int *ptr_sfsbq_base;
- u_int sfsbq_len, sfsbq_end;
- u_int sfsbq_prod_indx;
- u_int sfsbq_cons_indx;
- u_int sfsbuff_len, sfsbuff_end;
- u_int *ptr_sfs_buffers[SFSBQ_LENGTH * NO_OF_ENTRIES];
-
- /* Tables for SCSI Transactions */
- u_int *ptr_sest_base;
- u_int *ptr_sest[SEST_LENGTH];
- u_char free_scsi_oxid[SEST_LENGTH];
- u_int *ptr_sdb_base;
- u_int *ptr_sdb_slot[NO_OF_SDB_ENTRIES];
- u_char sdb_slot_status[NO_OF_SDB_ENTRIES];
- u_int sdb_indx;
- u_int *ptr_fcp_cmnd_base;
- u_int *ptr_fcp_cmnd[NO_OF_FCP_CMNDS];
- u_int fcp_cmnd_indx;
-
- /* Table for data to be transmitted.
- */
- u_int *ptr_edb_base;
- u_int *ptr_edb[EDB_LEN];
- u_int edb_buffer_indx;
- volatile u_char free_edb_list[EDB_LEN];
-
- /* Table of Tachyon Headers.
- */
- u_int *ptr_tachyon_header[NO_OF_TACH_HEADERS];
- u_int *ptr_tachyon_header_base;
- u_int tachyon_header_indx;
-};
-
-/* Used to match incoming ACCs to ELS requests sent out */
-struct ox_id_els_map {
- u_short ox_id;
- u_int els;
- struct ox_id_els_map *next;
-};
-
-
-/* Carries info about individual nodes... stores the info got at login
- * time. Also maintains mapping between MAC->FC addresses
- */
-struct fc_node_info {
- /* Itz the WWN (8 bytes), the last 6 bytes is the MAC address */
- u_char hw_addr[PORT_NAME_LEN];
- u_char node_name[NODE_NAME_LEN];
- u_int d_id; /*real FC address, 3 bytes */
- int mtu;
- /* login = 1 if login attempted
- * login = 2 if login completed
- */
- int login;
- u_char scsi; /* = 1 if device is a SCSI Target */
- u_char target_id;
- CLASS_OF_SERVICE c_of_s[3];
- struct fc_node_info *next;
-};
-
-struct fc_info {
- char name[8];
- u_long base_addr;
- int irq;
- struct net_device_stats fc_stats;
- struct fc_node_info *node_info_list;
- int num_nodes;
- struct ox_id_els_map *ox_id_list;
- struct i_chip_regs i_r;
- struct tachyon_regs t_r;
- struct queue_variables q;
- struct globals g;
- struct iph5526_novram n_r;
- u_short clone_id;
- struct timer_list nport_timer;
- struct timer_list lport_timer;
- struct timer_list explore_timer;
- struct timer_list display_cache_timer;
- struct net_device *dev;
- struct Scsi_Host *host;
- spinlock_t fc_lock;
-};
-
-struct iph5526_hostdata {
- struct fc_info *fi;
- fcp_cmd cmnd;
- Scsi_Cmnd *cmnd_handler[SEST_LENGTH];
- u_int tag_ages[MAX_SCSI_TARGETS];
-};
-
-/* List of valid AL_PAs */
-u_char alpa_list[127] = {
- 0x00, 0x01, 0x02, 0x04, 0x08, 0x0F, 0x10, 0x17,
- 0x18, 0x1B, 0x1D, 0x1E, 0x1F, 0x23, 0x25, 0x26,
- 0x27, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x31,
- 0x32, 0x33, 0x34, 0x35, 0x36, 0x39, 0x3A, 0x3C,
- 0x43, 0x45, 0x46, 0x47, 0x49, 0x4A, 0x4B, 0x4C,
- 0x4D, 0x4E, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56,
- 0x59, 0x5A, 0x5C, 0x63, 0x65, 0x66, 0x67, 0x69,
- 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x71, 0x72, 0x73,
- 0x74, 0x75, 0x76, 0x79, 0x7A, 0x7C, 0x80, 0x81,
- 0x82, 0x84, 0x88, 0x8F, 0x90, 0x97, 0x98, 0x9B,
- 0x9D, 0x9E, 0x9F, 0xA3, 0xA5, 0xA6, 0xA7, 0xA9,
- 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xB1, 0xB2, 0xB3,
- 0xB4, 0xB5, 0xB6, 0xB9, 0xBA, 0xBC, 0xC3, 0xC5,
- 0xC6, 0xC7, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE,
- 0xD1, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD9, 0xDA,
- 0xDC, 0xE0, 0xE1, 0xE2, 0xE4, 0xE8, 0xEF
-};
-
-#endif /* _TACH_STRUCT_H */
diff -puN drivers/net/Kconfig~kill-iphase5526 drivers/net/Kconfig
--- 25/drivers/net/Kconfig~kill-iphase5526 2005-02-24 23:16:08.000000000 -0800
+++ 25-akpm/drivers/net/Kconfig 2005-02-24 23:16:08.000000000 -0800
@@ -2540,15 +2540,6 @@ config NET_FC
adaptor below. You also should have said Y to "SCSI support" and
"SCSI generic support".
-config IPHASE5526
- tristate "Interphase 5526 Tachyon chipset based adapter support"
- depends on NET_FC && SCSI && PCI && BROKEN
- help
- Say Y here if you have a Fibre Channel adaptor of this kind.
-
- To compile this driver as a module, choose M here: the module
- will be called iph5526.
-
config SHAPER
tristate "Traffic Shaper (EXPERIMENTAL)"
depends on NETDEVICES && EXPERIMENTAL
diff -puN drivers/net/Makefile~kill-iphase5526 drivers/net/Makefile
--- 25/drivers/net/Makefile~kill-iphase5526 2005-02-24 23:16:08.000000000 -0800
+++ 25-akpm/drivers/net/Makefile 2005-02-24 23:16:08.000000000 -0800
@@ -184,7 +184,6 @@ obj-$(CONFIG_SMC91X) += smc91x.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
obj-$(CONFIG_ARM) += arm/
-obj-$(CONFIG_NET_FC) += fc/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
_