From: "Mark A. Greer" <mgreer@mvista.com>
This patch adds support for the Force CPCI-690 cPCI board.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
25-akpm/arch/ppc/Kconfig | 7
25-akpm/arch/ppc/boot/simple/Makefile | 6
25-akpm/arch/ppc/boot/simple/misc-cpci690.c | 15
25-akpm/arch/ppc/configs/cpci690_defconfig | 686 ++++++++++++++++++++++++++++
25-akpm/arch/ppc/platforms/Makefile | 1
25-akpm/arch/ppc/platforms/cpci690.c | 493 ++++++++++++++++++++
25-akpm/arch/ppc/platforms/cpci690.h | 73 ++
25-akpm/arch/ppc/syslib/Makefile | 4
8 files changed, 1284 insertions(+), 1 deletion(-)
diff -puN arch/ppc/boot/simple/Makefile~ppc32-support-for-force-cpci-690-board arch/ppc/boot/simple/Makefile
--- 25/arch/ppc/boot/simple/Makefile~ppc32-support-for-force-cpci-690-board 2004-12-07 12:08:30.515023504 -0800
+++ 25-akpm/arch/ppc/boot/simple/Makefile 2004-12-07 12:08:30.528021528 -0800
@@ -47,6 +47,12 @@ clear_L2_L3 := $(srctree)/$(boot)/simple
# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig
# for definition of what platform each config option refer to.
#----------------------------------------------------------------------------
+ zimage-$(CONFIG_CPCI690) := zImage-STRIPELF
+zimageinitrd-$(CONFIG_CPCI690) := zImage.initrd-STRIPELF
+ extra.o-$(CONFIG_CPCI690) := misc-cpci690.o mv64x60_stub.o
+ end-$(CONFIG_CPCI690) := cpci690
+ cacheflag-$(CONFIG_CPCI690) := -include $(clear_L2_L3)
+
zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE
zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE
end-$(CONFIG_IBM_OPENBIOS) := treeboot
diff -puN /dev/null arch/ppc/boot/simple/misc-cpci690.c
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ 25-akpm/arch/ppc/boot/simple/misc-cpci690.c 2004-12-07 12:08:30.529021376 -0800
@@ -0,0 +1,15 @@
+/*
+ * arch/ppc/boot/simple/misc-cpci690.c
+ *
+ * Add birec data for Force CPCI690 board.
+ *
+ * Author: Mark A. Greer <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/types.h>
+long mv64x60_mpsc_clk_freq = 133000000;
diff -puN /dev/null arch/ppc/configs/cpci690_defconfig
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ 25-akpm/arch/ppc/configs/cpci690_defconfig 2004-12-07 12:08:30.532020920 -0800
@@ -0,0 +1,686 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.10-rc2
+# Fri Dec 3 15:56:10 2004
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor
+#
+CONFIG_6xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E500 is not set
+CONFIG_ALTIVEC=y
+# CONFIG_TAU is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_STD_MMU=y
+# CONFIG_NOT_COHERENT_CACHE is not set
+
+#
+# Platform options
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_APUS is not set
+# CONFIG_KATANA is not set
+# CONFIG_DMV182 is not set
+# CONFIG_WILLOW is not set
+CONFIG_CPCI690=y
+# CONFIG_PCORE is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_EV64260 is not set
+# CONFIG_DB64360 is not set
+# CONFIG_CHESTNUT is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MCPN765 is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+# CONFIG_PRPMC880 is not set
+# CONFIG_SANDPOINT is not set
+# CONFIG_ADIR is not set
+# CONFIG_K2 is not set
+# CONFIG_PAL4 is not set
+# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_LITE5200 is not set
+
+#
+# Set bridge options
+#
+CONFIG_MV64X60_BASE=0xf1000000
+CONFIG_MV64X60_NEW_BASE=0xf1000000
+CONFIG_GT64260=y
+CONFIG_MV64X60=y
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyMM0,9600 ip=on"
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_EEPRO100_PIO is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MPSC=y
+CONFIG_SERIAL_MPSC_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
diff -puN arch/ppc/Kconfig~ppc32-support-for-force-cpci-690-board arch/ppc/Kconfig
--- 25/arch/ppc/Kconfig~ppc32-support-for-force-cpci-690-board 2004-12-07 12:08:30.517023200 -0800
+++ 25-akpm/arch/ppc/Kconfig 2004-12-07 12:08:30.528021528 -0800
@@ -503,6 +503,11 @@ config APUS
config WILLOW
bool "Cogent-Willow"
+config CPCI690
+ bool "Force-CPCI690"
+ help
+ Select CPCI690 if configuring a Force CPCI690 cPCI board.
+
config PCORE
bool "Force-PowerCore"
@@ -693,7 +698,7 @@ config FORCE
config GT64260
bool
- depends on EV64260
+ depends on EV64260 || CPCI690
default y
config MV64X60
diff -puN /dev/null arch/ppc/platforms/cpci690.c
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ 25-akpm/arch/ppc/platforms/cpci690.c 2004-12-07 12:08:30.535020464 -0800
@@ -0,0 +1,493 @@
+/*
+ * arch/ppc/platforms/cpci690.c
+ *
+ * Board setup routines for the Force CPCI690 board.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This programr
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/irq.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/mv643xx.h>
+#include <asm/bootinfo.h>
+#include <asm/machdep.h>
+#include <asm/todc.h>
+#include <asm/time.h>
+#include <asm/mv64x60.h>
+#include <platforms/cpci690.h>
+
+#define BOARD_VENDOR "Force"
+#define BOARD_MACHINE "CPCI690"
+
+/* Set IDE controllers into Native mode? */
+#define SET_PCI_IDE_NATIVE
+
+static struct mv64x60_handle bh;
+static u32 cpci690_br_base;
+
+static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
+ 18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
+};
+
+TODC_ALLOC();
+
+static int __init
+cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+ if (hose->index == 0) {
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 90, 91, 88, 89}, /* IDSEL 30/20 - Sentinel */
+ };
+
+ const long min_idsel = 20, max_idsel = 20, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+ }
+ else {
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 93, 94, 95, 92}, /* IDSEL 28/18 - PMC slot 2 */
+ { 0, 0, 0, 0}, /* IDSEL 29/19 - Not used */
+ { 94, 95, 92, 93}, /* IDSEL 30/20 - PMC slot 1 */
+ };
+
+ const long min_idsel = 18, max_idsel = 20, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+ }
+}
+
+static int
+cpci690_get_bus_speed(void)
+{
+ return 133333333;
+}
+
+static int
+cpci690_get_cpu_speed(void)
+{
+ unsigned long hid1;
+
+ hid1 = mfspr(HID1) >> 28;
+ return cpci690_get_bus_speed() * cpu_7xx[hid1]/2;
+}
+
+#define KB (1024UL)
+#define MB (1024UL * KB)
+#define GB (1024UL * MB)
+
+unsigned long __init
+cpci690_find_end_of_memory(void)
+{
+ u32 mem_ctlr_size;
+ static u32 board_size;
+ static u8 first_time = 1;
+
+ if (first_time) {
+ /* Using cpci690_set_bat() mapping ==> virt addr == phys addr */
+ switch (in_8((u8 *) (cpci690_br_base +
+ CPCI690_BR_MEM_CTLR)) & 0x07) {
+ case 0x01:
+ board_size = 256*MB;
+ break;
+ case 0x02:
+ board_size = 512*MB;
+ break;
+ case 0x03:
+ board_size = 768*MB;
+ break;
+ case 0x04:
+ board_size = 1*GB;
+ break;
+ case 0x05:
+ board_size = 1*GB + 512*MB;
+ break;
+ case 0x06:
+ board_size = 2*GB;
+ break;
+ default:
+ board_size = 0xffffffff; /* use mem ctlr size */
+ } /* switch */
+
+ mem_ctlr_size = mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
+ MV64x60_TYPE_GT64260A);
+
+ /* Check that mem ctlr & board reg agree. If not, pick MIN. */
+ if (board_size != mem_ctlr_size) {
+ printk(KERN_WARNING "Board register & memory controller"
+ "mem size disagree (board reg: 0x%lx, "
+ "mem ctlr: 0x%lx)\n",
+ (ulong)board_size, (ulong)mem_ctlr_size);
+ board_size = min(board_size, mem_ctlr_size);
+ }
+
+ first_time = 0;
+ } /* if */
+
+ return board_size;
+}
+
+static void __init
+cpci690_setup_bridge(void)
+{
+ struct mv64x60_setup_info si;
+ int i;
+
+ memset(&si, 0, sizeof(si));
+
+ si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
+
+ si.pci_0.enable_bus = 1;
+ si.pci_0.pci_io.cpu_base = CPCI690_PCI0_IO_START_PROC_ADDR;
+ si.pci_0.pci_io.pci_base_hi = 0;
+ si.pci_0.pci_io.pci_base_lo = CPCI690_PCI0_IO_START_PCI_ADDR;
+ si.pci_0.pci_io.size = CPCI690_PCI0_IO_SIZE;
+ si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
+ si.pci_0.pci_mem[0].cpu_base = CPCI690_PCI0_MEM_START_PROC_ADDR;
+ si.pci_0.pci_mem[0].pci_base_hi = CPCI690_PCI0_MEM_START_PCI_HI_ADDR;
+ si.pci_0.pci_mem[0].pci_base_lo = CPCI690_PCI0_MEM_START_PCI_LO_ADDR;
+ si.pci_0.pci_mem[0].size = CPCI690_PCI0_MEM_SIZE;
+ si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
+ si.pci_0.pci_cmd_bits = 0;
+ si.pci_0.latency_timer = 0x80;
+
+ si.pci_1.enable_bus = 1;
+ si.pci_1.pci_io.cpu_base = CPCI690_PCI1_IO_START_PROC_ADDR;
+ si.pci_1.pci_io.pci_base_hi = 0;
+ si.pci_1.pci_io.pci_base_lo = CPCI690_PCI1_IO_START_PCI_ADDR;
+ si.pci_1.pci_io.size = CPCI690_PCI1_IO_SIZE;
+ si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
+ si.pci_1.pci_mem[0].cpu_base = CPCI690_PCI1_MEM_START_PROC_ADDR;
+ si.pci_1.pci_mem[0].pci_base_hi = CPCI690_PCI1_MEM_START_PCI_HI_ADDR;
+ si.pci_1.pci_mem[0].pci_base_lo = CPCI690_PCI1_MEM_START_PCI_LO_ADDR;
+ si.pci_1.pci_mem[0].size = CPCI690_PCI1_MEM_SIZE;
+ si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
+ si.pci_1.pci_cmd_bits = 0;
+ si.pci_1.latency_timer = 0x80;
+
+ for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
+ si.cpu_prot_options[i] = 0;
+ si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
+ si.pci_0.acc_cntl_options[i] =
+ GT64260_PCI_ACC_CNTL_DREADEN |
+ GT64260_PCI_ACC_CNTL_RDPREFETCH |
+ GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
+ GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
+ GT64260_PCI_ACC_CNTL_SWAP_NONE |
+ GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
+ si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
+ si.pci_1.acc_cntl_options[i] =
+ GT64260_PCI_ACC_CNTL_DREADEN |
+ GT64260_PCI_ACC_CNTL_RDPREFETCH |
+ GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
+ GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
+ GT64260_PCI_ACC_CNTL_SWAP_NONE |
+ GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
+ si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
+ }
+
+ /* Lookup PCI host bridges */
+ if (mv64x60_init(&bh, &si))
+ printk(KERN_ERR "Bridge initialization failed.\n");
+
+ pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = cpci690_map_irq;
+ ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
+
+ mv64x60_set_bus(&bh, 0, 0);
+ bh.hose_a->first_busno = 0;
+ bh.hose_a->last_busno = 0xff;
+ bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
+
+ bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
+ mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
+ bh.hose_b->last_busno = 0xff;
+ bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
+ bh.hose_b->first_busno);
+
+ return;
+}
+
+static void __init
+cpci690_setup_peripherals(void)
+{
+ /* Set up windows to CPLD, RTC/TODC, IPMI. */
+ mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, CPCI690_BR_BASE,
+ CPCI690_BR_SIZE, 0);
+ bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
+ cpci690_br_base = (u32)ioremap(CPCI690_BR_BASE, CPCI690_BR_SIZE);
+
+ mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, CPCI690_TODC_BASE,
+ CPCI690_TODC_SIZE, 0);
+ bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
+ TODC_INIT(TODC_TYPE_MK48T35, 0, 0,
+ ioremap(CPCI690_TODC_BASE, CPCI690_TODC_SIZE), 8);
+
+ mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, CPCI690_IPMI_BASE,
+ CPCI690_IPMI_SIZE, 0);
+ bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
+
+ mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
+ mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
+
+ mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
+
+ /*
+ * Turn off timer/counters. Not turning off watchdog timer because
+ * can't read its reg on the 64260A so don't know if we'll be enabling
+ * or disabling.
+ */
+ mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
+ ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
+ mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
+ ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
+
+ /*
+ * Set MPSC Multiplex RMII
+ * NOTE: ethernet driver modifies bit 0 and 1
+ */
+ mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
+
+#define GPP_EXTERNAL_INTERRUPTS \
+ ((1<<24) | (1<<25) | (1<<26) | (1<<27) | \
+ (1<<28) | (1<<29) | (1<<30) | (1<<31))
+ /* PCI interrupts are inputs */
+ mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
+ /* PCI interrupts are active low */
+ mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
+
+ /* Clear any pending interrupts for these inputs and enable them. */
+ mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
+ mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
+
+ /* Route MPP interrupt inputs to GPP */
+ mv64x60_write(&bh, MV64x60_MPP_CNTL_2, 0x00000000);
+ mv64x60_write(&bh, MV64x60_MPP_CNTL_3, 0x00000000);
+
+ return;
+}
+
+static int __init
+cpci690_fixup_pd(void)
+{
+#if defined(CONFIG_SERIAL_MPSC)
+ struct list_head *entry;
+ struct platform_device *pd;
+ struct device *dev;
+ struct mpsc_pd_dd *dd;
+
+ list_for_each(entry, &platform_bus_type.devices.list) {
+ dev = container_of(entry, struct device, bus_list);
+ pd = container_of(dev, struct platform_device, dev);
+
+ if (!strncmp(pd->name, MPSC_CTLR_NAME, BUS_ID_SIZE)) {
+ dd = (struct mpsc_pd_dd *) dev_get_drvdata(&pd->dev);
+
+ dd->max_idle = 40;
+ dd->default_baud = 9600;
+ dd->brg_clk_src = 8;
+ dd->brg_clk_freq = 133000000;
+ }
+ }
+#endif
+
+ return 0;
+}
+
+subsys_initcall(cpci690_fixup_pd);
+
+static void __init
+cpci690_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("cpci690_setup_arch: enter", 0);
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_SDA2;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("cpci690_setup_arch: Enabling L2 cache", 0);
+
+ /* Enable L2 and L3 caches (if 745x) */
+ _set_L2CR(_get_L2CR() | L2CR_L2E);
+ _set_L3CR(_get_L3CR() | L3CR_L3E);
+
+ if (ppc_md.progress)
+ ppc_md.progress("cpci690_setup_arch: Initializing bridge", 0);
+
+ cpci690_setup_bridge(); /* set up PCI bridge(s) */
+ cpci690_setup_peripherals(); /* set up chip selects/GPP/MPP etc */
+
+ if (ppc_md.progress)
+ ppc_md.progress("cpci690_setup_arch: bridge init complete", 0);
+
+ printk(KERN_INFO "%s %s port (C) 2003 MontaVista Software, Inc. "
+ "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
+
+ if (ppc_md.progress)
+ ppc_md.progress("cpci690_setup_arch: exit", 0);
+
+ return;
+}
+
+static void
+cpci690_reset_board(void)
+{
+ u32 i = 10000;
+
+ local_irq_disable();
+ out_8((u8 *)(cpci690_br_base + CPCI690_BR_SW_RESET), 0x11);
+
+ while (i != 0) i++;
+ panic("restart failed\n");
+}
+
+static void
+cpci690_restart(char *cmd)
+{
+ cpci690_reset_board();
+}
+
+static void
+cpci690_halt(void)
+{
+ while (1);
+ /* NOTREACHED */
+}
+
+static void
+cpci690_power_off(void)
+{
+ cpci690_halt();
+ /* NOTREACHED */
+}
+
+static int
+cpci690_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
+ seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
+ seq_printf(m, "cpu MHz\t\t: %d\n", cpci690_get_cpu_speed()/1000/1000);
+ seq_printf(m, "bus MHz\t\t: %d\n", cpci690_get_bus_speed()/1000/1000);
+
+ return 0;
+}
+
+static void __init
+cpci690_calibrate_decr(void)
+{
+ ulong freq;
+
+ freq = cpci690_get_bus_speed()/4;
+
+ printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+ freq/1000000, freq%1000000);
+
+ tb_ticks_per_jiffy = freq / HZ;
+ tb_to_us = mulhwu_scale_factor(freq, 1000000);
+
+ return;
+}
+
+static __inline__ void
+cpci690_set_bat(u32 addr, u32 size)
+{
+ addr &= 0xfffe0000;
+ size &= 0x1ffe0000;
+ size = ((size >> 17) - 1) << 2;
+
+ mb();
+ mtspr(DBAT1U, addr | size | 0x2); /* Vs == 1; Vp == 0 */
+ mtspr(DBAT1L, addr | 0x2a); /* WIMG bits == 0101; PP == r/w access */
+ mb();
+
+ return;
+}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+static void __init
+cpci690_map_io(void)
+{
+ io_block_mapping(CONFIG_MV64X60_NEW_BASE, CONFIG_MV64X60_NEW_BASE,
+ 128 * KB, _PAGE_IO);
+}
+#endif
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+ initrd_start=initrd_end=0;
+ initrd_below_start_ok=0;
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ parse_bootinfo(find_bootinfo());
+
+ loops_per_jiffy = cpci690_get_cpu_speed() / HZ;
+
+ isa_mem_base = 0;
+
+ ppc_md.setup_arch = cpci690_setup_arch;
+ ppc_md.show_cpuinfo = cpci690_show_cpuinfo;
+ ppc_md.init_IRQ = gt64260_init_irq;
+ ppc_md.get_irq = gt64260_get_irq;
+ ppc_md.restart = cpci690_restart;
+ ppc_md.power_off = cpci690_power_off;
+ ppc_md.halt = cpci690_halt;
+ ppc_md.find_end_of_memory = cpci690_find_end_of_memory;
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+ ppc_md.calibrate_decr = cpci690_calibrate_decr;
+
+ /*
+ * Need to map in board regs (used by cpci690_find_end_of_memory())
+ * and the bridge's regs (used by progress);
+ */
+ cpci690_set_bat(CPCI690_BR_BASE, 32 * MB);
+ cpci690_br_base = CPCI690_BR_BASE;
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ ppc_md.setup_io_mappings = cpci690_map_io;
+ ppc_md.progress = mv64x60_mpsc_progress;
+ mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+#ifdef CONFIG_KGDB
+ ppc_md.setup_io_mappings = cpci690_map_io;
+ ppc_md.early_serial_map = cpci690_early_serial_map;
+#endif /* CONFIG_KGDB */
+
+ return;
+}
diff -puN /dev/null arch/ppc/platforms/cpci690.h
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ 25-akpm/arch/ppc/platforms/cpci690.h 2004-12-07 12:08:30.536020312 -0800
@@ -0,0 +1,73 @@
+/*
+ * arch/ppc/platforms/cpci690.h
+ *
+ * Definitions for Force CPCI690
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2003 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * The GT64260 has 2 PCI buses each with 1 window from the CPU bus to
+ * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
+ */
+
+#ifndef __PPC_PLATFORMS_CPCI690_H
+#define __PPC_PLATFORMS_CPCI690_H
+
+/*
+ * Define bd_t to pass in the MAC addresses used by the GT64260's enet ctlrs.
+ */
+#define CPCI690_BI_MAGIC 0xFE8765DC
+
+typedef struct board_info {
+ u32 bi_magic;
+ u8 bi_enetaddr[3][6];
+} bd_t;
+
+/* PCI bus Resource setup */
+#define CPCI690_PCI0_MEM_START_PROC_ADDR 0x80000000
+#define CPCI690_PCI0_MEM_START_PCI_HI_ADDR 0x00000000
+#define CPCI690_PCI0_MEM_START_PCI_LO_ADDR 0x80000000
+#define CPCI690_PCI0_MEM_SIZE 0x10000000
+#define CPCI690_PCI0_IO_START_PROC_ADDR 0xa0000000
+#define CPCI690_PCI0_IO_START_PCI_ADDR 0x00000000
+#define CPCI690_PCI0_IO_SIZE 0x01000000
+
+#define CPCI690_PCI1_MEM_START_PROC_ADDR 0x90000000
+#define CPCI690_PCI1_MEM_START_PCI_HI_ADDR 0x00000000
+#define CPCI690_PCI1_MEM_START_PCI_LO_ADDR 0x90000000
+#define CPCI690_PCI1_MEM_SIZE 0x10000000
+#define CPCI690_PCI1_IO_START_PROC_ADDR 0xa1000000
+#define CPCI690_PCI1_IO_START_PCI_ADDR 0x01000000
+#define CPCI690_PCI1_IO_SIZE 0x01000000
+
+/* Board Registers */
+#define CPCI690_BR_BASE 0xf0000000
+#define CPCI690_BR_SIZE_ACTUAL 0x8
+#define CPCI690_BR_SIZE max(GT64260_WINDOW_SIZE_MIN, \
+ CPCI690_BR_SIZE_ACTUAL)
+#define CPCI690_BR_LED_CNTL 0x00
+#define CPCI690_BR_SW_RESET 0x01
+#define CPCI690_BR_MISC_STATUS 0x02
+#define CPCI690_BR_SWITCH_STATUS 0x03
+#define CPCI690_BR_MEM_CTLR 0x04
+#define CPCI690_BR_LAST_RESET_1 0x05
+#define CPCI690_BR_LAST_RESET_2 0x06
+
+#define CPCI690_TODC_BASE 0xf0100000
+#define CPCI690_TODC_SIZE_ACTUAL 0x8000 /* Size or NVRAM + RTC */
+#define CPCI690_TODC_SIZE max(GT64260_WINDOW_SIZE_MIN, \
+ CPCI690_TODC_SIZE_ACTUAL)
+#define CPCI690_MAC_OFFSET 0x7c10 /* MAC in RTC NVRAM */
+
+#define CPCI690_IPMI_BASE 0xf0200000
+#define CPCI690_IPMI_SIZE_ACTUAL 0x10 /* 16 bytes of IPMI */
+#define CPCI690_IPMI_SIZE max(GT64260_WINDOW_SIZE_MIN, \
+ CPCI690_IPMI_SIZE_ACTUAL)
+
+#endif /* __PPC_PLATFORMS_CPCI690_H */
diff -puN arch/ppc/platforms/Makefile~ppc32-support-for-force-cpci-690-board arch/ppc/platforms/Makefile
--- 25/arch/ppc/platforms/Makefile~ppc32-support-for-force-cpci-690-board 2004-12-07 12:08:30.519022896 -0800
+++ 25-akpm/arch/ppc/platforms/Makefile 2004-12-07 12:08:30.532020920 -0800
@@ -23,6 +23,7 @@ obj-$(CONFIG_PREP_RESIDUAL) += residual.
obj-$(CONFIG_ADIR) += adir_setup.o adir_pic.o adir_pci.o
obj-$(CONFIG_PQ2ADS) += pq2ads.o
obj-$(CONFIG_TQM8260) += tqm8260_setup.o
+obj-$(CONFIG_CPCI690) += cpci690.o
obj-$(CONFIG_EV64260) += ev64260.o
obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o
obj-$(CONFIG_K2) += k2.o
diff -puN arch/ppc/syslib/Makefile~ppc32-support-for-force-cpci-690-board arch/ppc/syslib/Makefile
--- 25/arch/ppc/syslib/Makefile~ppc32-support-for-force-cpci-690-board 2004-12-07 12:08:30.521022592 -0800
+++ 25-akpm/arch/ppc/syslib/Makefile 2004-12-07 12:08:30.536020312 -0800
@@ -39,6 +39,7 @@ obj-$(CONFIG_PPC_CHRP) += open_pic.o in
obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o
obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \
todc_time.o
+obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o
obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o
obj-$(CONFIG_GEMINI) += open_pic.o indirect_pci.o
@@ -77,6 +78,9 @@ ifeq ($(CONFIG_PPC_GEN550),y)
obj-$(CONFIG_KGDB) += gen550_kgdb.o gen550_dbg.o
obj-$(CONFIG_SERIAL_TEXT_DEBUG) += gen550_dbg.o
endif
+ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
+obj-$(CONFIG_SERIAL_TEXT_DEBUG) += mv64x60_dbg.o
+endif
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o
obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o
_