From: James Nelson <james4765@verizon.net> Put README.cycladesZ in Documentation/serial. Firmware is still needed, but the README file shouldn't be in drivers/char. Signed-off-by: James Nelson <james4765@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> --- /dev/null | 8 -------- 25-akpm/Documentation/README.cycladesZ | 8 ++++++++ 2 files changed, 8 insertions(+), 8 deletions(-) diff -puN /dev/null Documentation/README.cycladesZ --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/Documentation/README.cycladesZ 2004-12-27 01:21:58.322673456 -0800 @@ -0,0 +1,8 @@ + +The Cyclades-Z must have firmware loaded onto the card before it will +operate. This operation should be performed during system startup, + +The firmware, loader program and the latest device driver code are +available from Cyclades at + ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ + diff -L drivers/char/README.cycladesZ -puN drivers/char/README.cycladesZ~cyclades-put-readmecycladez-in-documentation-serial /dev/null --- 25/drivers/char/README.cycladesZ +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,8 +0,0 @@ - -The Cyclades-Z must have firmware loaded onto the card before it will -operate. This operation should be performed during system startup, - -The firmware, loader program and the latest device driver code are -available from Cyclades at - ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ - _