From: Bart Samwel Here's an updated version of the laptop-mode patch. The previous version had some corner cases that it didn't handle gracefully; this version should fix that. Also, thanks to Kiko Piris, the control script has been much improved, now featuring linux 2.4 backward compatibility and automatic remounts of filesystems. If you have any problems (or no problems) with it, please let me know. * Control script moved into a section of Documentation/laptop-mode.txt. * Format string problem fixed. * Control script is now able to remount all ext3/reiserfs filesystems with commit=$MAX_AGE. It also removes the commit option when laptop mode is stopped. If you don't want this, change DO_REMOUNTS to 0. * Control script now works for Linux 2.4 as well, to facilitate dual-booting. * Reinstated the timer that I removed in the previous version. In version 5, frequent reads could postpone writeback indefinitely, because the kupdate writeback timer was updated to jiffies+5*HZ every time a read was performed. Now the only thing that is postponed is laptop mode's scheduling of writeback, and the normal writeback timer is not touched. * A situation that could arise in version 5 was that a process would reach dirty_ratio dirty pages, and that it would stay at that level, postponing writeback of all data every time balance_dirty_pages was run (by resetting the timer to jiffies+5*HZ). In the attached patch, previously scheduled writebacks are not postponed anymore. * balance_dirty_pages doesn't trigger background writebacks anymore when laptop mode is active. Version 5 disabled writebacks by setting dirty_background_ratio to the same value as dirty_ratio, but as it turns out this doesn't work: the kernel checks if dirty_background_ratio >= dirty_ratio and if so, sets dirty_background_ratio = dirty_ratio/2. DESC Documentation/laptop-mode.txt EDESC From: Dax Kelson DESC laptop-mode documentation updates EDESC From: Bart Samwel laptop-mode documentation updates --- Documentation/laptop-mode.txt | 475 ++++++++++++++++++++++++++++++++++++++++++ drivers/block/ll_rw_blk.c | 16 + fs/buffer.c | 7 include/linux/sysctl.h | 2 include/linux/writeback.h | 5 kernel/sysctl.c | 20 + mm/page-writeback.c | 60 +++++ 7 files changed, 581 insertions(+), 4 deletions(-) diff -puN /dev/null Documentation/laptop-mode.txt --- /dev/null 2002-08-30 16:31:37.000000000 -0700 +++ 25-akpm/Documentation/laptop-mode.txt 2004-01-19 22:38:39.000000000 -0800 @@ -0,0 +1,475 @@ +How to conserve battery power using laptop-mode +----------------------------------------------- + +Document Author: Bart Samwel (bart@samwel.tk) +Date created: January 2, 2004 + +Introduction +------------ + +Laptopmode is used to minimize the time that the hard disk needs to be spun up, +to conserve battery power on laptops. It has been reported to cause significant +power savings. + +Contents +-------- + +* Introduction +* The short story +* Caveats +* The details +* Tips & Tricks +* Control script +* ACPI integration +* Monitoring tool + + +The short story +--------------- + +If you just want to use it, run the laptop_mode control script (which is included +at the end of this document) as follows: + +# laptop_mode start + +Then set your harddisk spindown time to a relatively low value with hdparm: + +hdparm -S 4 /dev/hda + +The value -S 4 means 20 seconds idle time before spindown. Your harddisk will +now only spin up when a disk cache miss occurs, or at least once every 10 +minutes to write back any pending changes. + +To stop laptop_mode, remount your filesystems with regular commit intervals +(e.g., 5 seconds), and run "laptop_mode stop". + + +Caveats +------- + +* The downside of laptop mode is that you have a chance of losing up + to 10 minutes of work. If you cannot afford this, don't use it! + +* Most desktop hard drives have a very limited lifetime measured in spindown + cycles, typically about 50.000 times (it's usually listed on the spec sheet). + Check your drive's rating, and don't wear down your drive's lifetime if you + don't need to. + +* If you mount some of your ext3/reiserfs filesystems with the -n option, then + the control script will not be able to remount them correctly. You must set + DO_REMOUNTS=0 in the control script, otherwise it will remount them with the + wrong options -- or it will fail because it cannot write to /etc/mtab. + +* If you have your filesystems listed as type "auto" in fstab, like I did, then + the control script will not recognize them as filesystems that need remounting. + +The details +----------- + +Laptop-mode is controlled by the flag /proc/sys/vm/laptop_mode. When this +flag is set, any physical disk read operation (that might have caused the +hard disk to spin up) causes Linux to flush all dirty blocks. The result +of this is that after a disk has spun down, it will not be spun up anymore +to write dirty blocks, because those blocks had already been written +immediately after the most recent read operation + +To increase the effectiveness of the laptop_mode strategy, the laptop_mode +control script increases dirty_expire_centisecs and dirty_writeback_centisecs in +/proc/sys/vm to about 10 minutes (by default), which means that pages that are +dirtied are not forced to be written to disk as often. The control script also +changes the dirty background ratio, so that background writeback of dirty pages +is not done anymore. Combined with a higher commit value (also 10 minutes) for +ext3 or ReiserFS filesystems (also done automatically by the control script), +this results in concentration of disk activity in a small time interval which +occurs only once every 10 minutes, or whenever the disk is forced to spin up by +a cache miss. The disk can then be spun down in the periods of inactivity. + +If you want to find out which process caused the disk to spin up, you can +gather information by setting the flag /proc/sys/vm/block_dump. When this flag +is set, Linux reports all disk read and write operations that take place, and +all block dirtyings done to files. This makes it possible to debug why a disk +needs to spin up, and to increase battery life even more. + +If 10 minutes is too much or too little downtime for you, you can configure +this downtime as follows. In the control script, set the MAX_AGE value to the +maximum number of seconds of disk downtime that you would like. You should +then set your filesystem's commit interval to the same value. The dirty ratio +is also configurable from the control script. + +If you don't like the idea of the control script remounting your filesystems +for you, you can change DO_REMOUNTS to 0 in the script. + +Thanks to Kiko Piris, the control script can be used to enable laptop mode on +both the Linux 2.4 and 2.6 series. + + +Tips & Tricks +------------- + +* Bartek Kania reports getting up to 50 minutes of extra battery life (on top + of his regular 3 to 3.5 hours) using very aggressive power management (hdparm + -B1) and a spindown time of 5 seconds (hdparm -S1). + +* You can spin down the disk while playing MP3, by setting the disk readahead + to 8MB (hdparm -a 16384). Effectively, the disk will read a complete MP3 at + once, and will then spin down while the MP3 is playing. (Thanks to Bartek + Kania.) + + +Control script +-------------- + +Please note that this control script works for the Linux 2.4 and 2.6 series. + +--------------------CONTROL SCRIPT BEGIN------------------------------------------ +#!/bin/sh + +# start or stop laptop_mode, best run by a power management daemon when +# ac gets connected/disconnected from a laptop +# +# install as /sbin/laptop_mode +# +# Contributors to this script: Kiko Piris +# Bart Samwel +# Dax Kelson +# Original Linux 2.4 version by: Jens Axboe + +parse_mount_opts () { + echo "$*" | \ + sed 's/commit=[0-9]*//g' | \ + sed 's/,,*/,/g' | \ + sed 's/^,//' | \ + sed 's/,$//' | \ + cat - +} + +KLEVEL="$(uname -r | cut -c1-3)" +case "$KLEVEL" in + "2.4") + true + ;; + "2.6") + true + ;; + *) + echo "Unhandled kernel level: $KLEVEL ('uname -r' = '$(uname -r)')" + exit 1 + ;; +esac + +# Shall we remount journaled fs. with appropiate commit interval? (1=yes) +DO_REMOUNTS=1 + +# age time, in seconds. should be put into a sysconfig file +MAX_AGE=600 + +# Allowed dirty ratio, in pct. should be put into a sysconfig file as well. +DIRTY_RATIO=40 + +# kernel default dirty buffer age +DEF_AGE=30 +DEF_UPDATE=5 +DEF_DIRTY_BACKGROUND_RATIO=10 +DEF_DIRTY_RATIO=40 + + +if [ ! -e /proc/sys/vm/laptop_mode ]; then + echo "Kernel is not patched with laptop_mode patch." + exit 1 +fi + +if [ ! -w /proc/sys/vm/laptop_mode ]; then + echo "You do not have enough privileges to enable laptop_mode." + exit 1 +fi + +case "$1" in + start) + AGE=$((100*$MAX_AGE)) + echo -n "Starting laptop_mode" + case "$KLEVEL" in + "2.4") + echo "1" > /proc/sys/vm/laptop_mode + echo "30 500 0 0 $AGE $AGE 60 20 0" > /proc/sys/vm/bdflush + ;; + "2.6") + echo "1" > /proc/sys/vm/laptop_mode + echo "$AGE" > /proc/sys/vm/dirty_writeback_centisecs + echo "$AGE" > /proc/sys/vm/dirty_expire_centisecs + echo "$DIRTY_RATIO" > /proc/sys/vm/dirty_ratio + echo "$DIRTY_RATIO" > /proc/sys/vm/dirty_background_ratio + ;; + esac + if [ $DO_REMOUNTS -eq 1 ]; then + cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do + PARSEDOPTS="$(parse_mount_opts "$OPTS")" + case "$FST" in + "ext3") mount $DEV -t $FST $MP -o remount,$PARSEDOPTS,commit=$MAX_AGE ;; + "reiserfs") mount $DEV -t $FST $MP -o remount,$PARSEDOPTS,commit=$MAX_AGE ;; + "xfs") mount $DEV -t $FST $MP -o remount,$PARSEDOPTS,commit=$MAX_AGE ;; + esac + done + fi + echo "." + ;; + stop) + U_AGE=$((100*$DEF_UPDATE)) + B_AGE=$((100*$DEF_AGE)) + echo -n "Stopping laptop_mode" + case "$KLEVEL" in + "2.4") + echo "0" > /proc/sys/vm/laptop_mode + echo "30 500 0 0 $U_AGE $B_AGE 60 20 0" > /proc/sys/vm/bdflush + ;; + "2.6") + echo "0" > /proc/sys/vm/laptop_mode + echo "$U_AGE" > /proc/sys/vm/dirty_writeback_centisecs + echo "$B_AGE" > /proc/sys/vm/dirty_expire_centisecs + echo "$DEF_DIRTY_RATIO" > /proc/sys/vm/dirty_ratio + echo "$DEF_DIRTY_BACKGROUND_RATIO" > /proc/sys/vm/dirty_background_ratio + ;; + esac + if [ $DO_REMOUNTS -eq 1 ]; then + cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do + PARSEDOPTS="$(parse_mount_opts "$OPTS")" + case "$FST" in + "ext3") mount $DEV -t $FST $MP -o remount,$PARSEDOPTS ;; + "reiserfs") mount $DEV -t $FST $MP -o remount,$PARSEDOPTS ;; + "xfs") mount $DEV -t $FST $MP -o remount,$PARSEDOPTS ;; + esac + done + fi + echo "." + ;; + *) + echo "$0 {start|stop}" + ;; + +esac + +exit 0 + +--------------------CONTROL SCRIPT END-------------------------------------------- + + +ACPI integration +---------------- + +Dax Kelson submitted this so that the ACPI acpid daemon will +kick off the laptop_mode script and run hdparm. + +---------------------------/etc/acpi/events/ac_adapter BEGIN------------------------------------------- +event=ac_adapter +action=/etc/acpi/actions/battery.sh +---------------------------/etc/acpi/events/ac_adapter END------------------------------------------- + +---------------------------/etc/acpi/actions/battery.sh BEGIN------------------------------------------- +#!/bin/sh + +# cpu throttling +# cat /proc/acpi/processor/CPU0/throttling for more info +ACAD_THR=0 +BATT_THR=2 + +# spindown time for HD (man hdparm for valid values) +# I prefer 2 hours for acad and 20 seconds for batt +ACAD_HD=244 +BATT_HD=4 + +# ac/battery event handler + +status=`awk '/^state: / { print $2 }' /proc/acpi/ac_adapter/AC/state` + +case $status in + "on-line") + echo "Setting HD spindown to 2 hours" + /sbin/laptop-mode stop + /sbin/hdparm -S $ACAD_HD /dev/hda > /dev/null 2>&1 + /sbin/hdparm -B 255 /dev/hda > /dev/null 2>&1 + #echo -n $ACAD_CPU:$ACAD_THR > /proc/acpi/processor/CPU0/limit + exit 0 + ;; + "off-line") + echo "Setting HD spindown to 20 seconds" + /sbin/laptop-mode start + /sbin/hdparm -S $BATT_HD /dev/hda > /dev/null 2>&1 + /sbin/hdparm -B 1 /dev/hda > /dev/null 2>&1 + #echo -n $BATT_CPU:$BATT_THR > /proc/acpi/processor/CPU0/limit + exit 0 + ;; +esac +---------------------------/etc/acpi/actions/battery.sh END------------------------------------------- + +Monitoring tool +--------------- + +Bartek Kania submitted this, it can be used to measure how much time your disk +spends spun up/down. + +---------------------------dslm.c BEGIN------------------------------------------- +/* + * Simple Disk SLeep Monitor + * by Bartek Kania + * Licenced under the GPL + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef DEBUG +#define D(x) x +#else +#define D(x) +#endif + +int endit = 0; + +/* Check if the disk is in powersave-mode + * Most of the code is stolen from hdparm. + * 1 = active, 0 = standby/sleep, -1 = unknown */ +int check_powermode(int fd) +{ + unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0}; + int state; + + if (ioctl(fd, HDIO_DRIVE_CMD, &args) + && (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */ + && ioctl(fd, HDIO_DRIVE_CMD, &args)) { + if (errno != EIO || args[0] != 0 || args[1] != 0) { + state = -1; /* "unknown"; */ + } else + state = 0; /* "sleeping"; */ + } else { + state = (args[2] == 255) ? 1 : 0; + } + D(printf(" drive state is: %s\n", state)); + + return state; +} + +char *state_name(int i) +{ + if (i == -1) return "unknown"; + if (i == 0) return "sleeping"; + if (i == 1) return "active"; + + return "internal error"; +} + +char *myctime(time_t time) +{ + char *ts = ctime(&time); + ts[strlen(ts) - 1] = 0; + + return ts; +} + +void measure(int fd) +{ + time_t start_time; + int last_state; + time_t last_time; + int curr_state; + time_t curr_time = 0; + time_t time_diff; + time_t active_time = 0; + time_t sleep_time = 0; + time_t unknown_time = 0; + time_t total_time = 0; + int changes = 0; + float tmp; + + printf("Starting measurements\n"); + + last_state = check_powermode(fd); + start_time = last_time = time(0); + printf(" System is in state %s\n\n", state_name(last_state)); + + while(!endit) { + sleep(1); + curr_state = check_powermode(fd); + + if (curr_state != last_state || endit) { + changes++; + curr_time = time(0); + time_diff = curr_time - last_time; + + if (last_state == 1) active_time += time_diff; + else if (last_state == 0) sleep_time += time_diff; + else unknown_time += time_diff; + + last_state = curr_state; + last_time = curr_time; + + printf("%s: State-change to %s\n", myctime(curr_time), + state_name(curr_state)); + } + } + changes--; /* Compensate for SIGINT */ + + total_time = time(0) - start_time; + printf("\nTotal running time: %lus\n", curr_time - start_time); + printf(" State changed %d times\n", changes); + + tmp = (float)sleep_time / (float)total_time * 100; + printf(" Time in sleep state: %lus (%.2f%%)\n", sleep_time, tmp); + tmp = (float)active_time / (float)total_time * 100; + printf(" Time in active state: %lus (%.2f%%)\n", active_time, tmp); + tmp = (float)unknown_time / (float)total_time * 100; + printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp); +} + +void ender(int s) +{ + endit = 1; +} + +void usage() +{ + puts("usage: dslm [-w